Standby optionally sends back information about oldestXmin of queries
which is then checked and applied to the WALSender's proc->xmin.
GetOldestXmin() is modified slightly to agree with GetSnapshotData(),
so that all backends on primary include WALSender within their snapshots.
Note this does nothing to change the snapshot xmin on either master or
standby. Feedback piggybacks on the standby reply message.
vacuum_defer_cleanup_age is no longer used on standby, though parameter
still exists on primary, since some use cases still exist.
Simon Riggs, review comments from Fujii Masao, Heikki Linnakangas, Robert Haas
the standby has written, flushed, and applied the WAL. At the moment, this
is for informational purposes only, the values are only shown in
pg_stat_replication system view, but in the future they will also be needed
for synchronous replication.
Extracted from Simon riggs' synchronous replication patch by Robert Haas, with
some tweaking by me.
Specifying this option makes the server not wait for the
xlog to be archived, or emit a warning that it can't,
instead leaving the responsibility with the client.
This is useful when the log is being streamed using
the streaming protocol in parallel with the backup,
without having log archiving enabled.
new recovery.conf parameter recovery_target_name allows PITR to
specify named points as recovery targets.
Jaime Casanova, reviewed by Euler Taveira de Oliveira, plus minor edits
With this patch, pg_basebackup doesn't write a backup_label file in the
data directory, so it doesn't interfere with a pg_start/stop_backup() based
backup anymore. backup_label is still included in the backup, but it is
injected directly into the tar stream.
Heikki Linnakangas, reviewed by Fujii Masao and Magnus Hagander.
Move the actual functionality into a separate function that's
easier to call internally, and change the SQL-callable function
to be a wrapper calling this.
Also create a pg_abort_backup() function, only callable internally,
that does only the most vital parts of pg_stop_backup(), making it
safe(r) to call from error handlers.
new WAL arrives via streaming replication. This reduces the latency, and
also allows us to use a longer polling interval, which is good for energy
efficiency.
We still need to poll to check for the appearance of a trigger file, but
the interval is now 5 seconds (instead of 100ms), like when waiting for
a new WAL segment to appear in WAL archive.
Transaction aborts now record their LSN to avoid corner case
behaviour in SR/HS, hence change of name of variables and functions.
As pointed out by Fujii Masao. Cosmetic changes only.
max_standby_streaming_delay, and revise the implementation to avoid assuming
that timestamps found in WAL records can meaningfully be compared to clock
time on the standby server. Instead, the delay limits are compared to the
elapsed time since we last obtained a new WAL segment from archive or since
we were last "caught up" to WAL data arriving via streaming replication.
This avoids problems with clock skew between primary and standby, as well
as other corner cases that the original coding would misbehave in, such
as the primary server having significant idle time between transactions.
Per my complaint some time ago and considerable ensuing discussion.
Do some desultory editing on the hot standby documentation, too.
master. Otherwise a subsequent crash could cause the master to lose WAL that
has already been applied on the slave, resulting in the slave being out of
sync and soon corrupt. Per recent discussion and an example from Robert Haas.
Fujii Masao
confusion with streaming-replication settings. Also, change its default
value to "off", because of concern about executing new and poorly-tested
code during ordinary non-replicating operation. Per discussion.
In passing do some minor editing of related documentation.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
Also, make the name of the GUC and the name of the backing variable match.
Alnong the way, clean up a couple of slight typographical errors in the
related docs.
through normal backends. Makes code clearer also, since we
avoid various Assert()s. Performance of snapshots taken
during recovery no longer depends upon number of read-only
backends.
doesn't take into account how far the WAL senders are. This way a hung
WAL sender doesn't prevent old WAL segments from being recycled/removed
in the primary, ultimately causing the disk to fill up. Instead add
standby_keep_segments setting to control how many old WAL segments are
kept in the primary. This also makes it more reliable to use streaming
replication without WAL archiving, assuming that you set
standby_keep_segments high enough.
The error message now makes explicit reference to the GUC that must be changed
to fix the problem, using wording suggested by Tom Lane. Along the way,
rename the GUC from MaxWalSenders to max_wal_senders for consistency and
grep-ability.
present since 8.0 was never fully meaningful, since two recovery targets
cannot be specified. Refactor recovery target type to make this change
and associated code easier to understand. No change in function.
Bug report arising from internal support question.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
false positives during Hot Standby conflict processing. Simple
patch to enhance conflict processing, following previous discussions.
Controlled by parameter minimize_standby_conflicts = on | off, with
default off allows measurement of performance impact to see whether
it should be set on all the time.
that would've been WAL-logged if archiving was enabled. If we encounter
such records in archive recovery anyway, we know that some data is
missing from the log. A WARNING is emitted in that case.
Original patch by Fujii Masao, with changes by me.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
archive recovery. Invent a separate state variable and inquiry function
for XLogInsertAllowed() to clarify some tests and make the management of
writing the end-of-recovery checkpoint less klugy. Fix several places
that were incorrectly testing InRecovery when they should be looking at
RecoveryInProgress or XLogInsertAllowed (because they will now be executed
in the bgwriter not startup process). Clarify handling of bad LSNs passed
to XLogFlush during recovery. Use a spinlock for setting/testing
SharedRecoveryInProgress. Improve quite a lot of comments.
Heikki and Tom
during it:
When bgwriter is active, the startup process can't perform mdsync() correctly
because it won't see the fsync requests accumulated in bgwriter's private
pendingOpsTable. Therefore make bgwriter responsible for the end-of-recovery
checkpoint as well, when it's active.
When bgwriter is active (= archive recovery), the startup process must not
accumulate fsync requests to its own pendingOpsTable, since bgwriter won't
see them there when it performs restartpoints. Make startup process drop its
pendingOpsTable when bgwriter is launched to avoid that.
Update minimum recovery point one last time when leaving archive recovery.
It won't be updated by the end-of-recovery checkpoint because XLogFlush()
sees us as out of recovery already.
This fixes bug #4879 reported by Fujii Masao.
its usual buffer cleaning duties during archive recovery, and it's responsible
for performing restartpoints.
This requires some changes in postmaster. When the startup process has done
all the initialization and is ready to start WAL redo, it signals the
postmaster to launch the background writer. The postmaster is signaled again
when the point in recovery is reached where we know that the database is in
consistent state. Postmaster isn't interested in that at the moment, but
that's the point where we could let other backends in to perform read-only
queries. The postmaster is signaled third time when the recovery has ended,
so that postmaster knows that it's safe to start accepting connections.
The startup process now traps SIGTERM, and performs a "clean" shutdown. If
you do a fast shutdown during recovery, a shutdown restartpoint is performed,
like a shutdown checkpoint, and postmaster kills the processes cleanly. You
still have to continue the recovery at next startup, though.
Currently, the background writer is only launched during archive recovery.
We could launch it during crash recovery as well, but it seems better to keep
that codepath as simple as possible, for the sake of robustness. And it
couldn't do any restartpoints during crash recovery anyway, so it wouldn't be
that useful.
log_restartpoints is gone. Use log_checkpoints instead. This is yet to be
documented.
This whole operation is a pre-requisite for Hot Standby, but has some value of
its own whether the hot standby patch makes 8.4 or not.
Simon Riggs, with lots of modifications by me.
be used instead of the normal exclusive lock, and make WAL redo functions
responsible for calling RestoreBkpBlocks(). They know better what kind of a
lock they need.
At the moment, this just moves things around with no functional change, but
makes the hot standby patch that's under review cleaner.
- create a separate archive_mode GUC, on which archive_command is dependent
- %r option in recovery.conf sends last restartpoint to recovery command
- %r used in pg_standby, updated README
- minor other code cleanup in pg_standby
- doc on Warm Standby now mentions pg_standby and %r
- log_restartpoints recovery option emits LOG message at each restartpoint
- end of recovery now displays last transaction end time, as requested
by Warren Little; also shown at each restartpoint
- restart archiver if needed to carry away WAL files at shutdown
Simon Riggs
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
and fsync WAL at convenient intervals. For the moment it just tries to
offload this work from backends, but soon it will be responsible for
guaranteeing a maximum delay before asynchronously-committed transactions
will be flushed to disk.
This is a portion of Simon Riggs' async-commit patch, committed to CVS
separately because a background WAL writer seems like it might be a good idea
independently of the async-commit feature. I rebased walwriter.c on
bgwriter.c because it seemed like a more appropriate way of handling signals;
while the startup/shutdown logic in postmaster.c is more like autovac because
we want walwriter to quit before we start the shutdown checkpoint.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
Bruce Momjian