20 Commits (b7eda3e0e33402a7727253e6f307ca96b92eb23d)

Author	SHA1	Message	Date
Andres Freund	b7eda3e0e3	Move generic snapshot related code from tqual.h to snapmgr.h. ... The code in tqual.c is largely heap specific. Due to the upcoming pluggable storage work, it therefore makes sense to move it into access/heap/ (as the file's header notes, the tqual name isn't very good). But the various statically allocated snapshot and snapshot initialization functions are now (see previous commit) generic and do not depend on functions declared in tqual.h anymore. Therefore move. Also move XidInMVCCSnapshot as that's useful for future AMs, and already used outside of tqual.c. Author: Andres Freund Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de	7 years ago
Andres Freund	63746189b2	Change snapshot type to be determined by enum rather than callback. ... This is in preparation for allowing the same snapshot be used for different table AMs. With the current callback based approach we would need one callback for each supported AM, which clearly would not be extensible. Thus add a new Snapshot->snapshot_type field, and move the dispatch into HeapTupleSatisfiesVisibility() (which is now a function). Later work will then dispatch calls to HeapTupleSatisfiesVisibility() and other AMs visibility functions depending on the type of the table. The central SnapshotType enum also seems like a good location to centralize documentation about the intended behaviour of various types of snapshots. As tqual.h isn't included by bufmgr.h any more (as HeapTupleSatisfies* isn't referenced by TestForOldSnapshot() anymore) a few files now need to include it directly. Author: Andres Freund, loosely based on earlier work by Haribabu Kommi Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de https://postgr.es/m/20160812231527.GA690404@alvherre.pgsql	7 years ago
Andres Freund	e0c4ec0728	Replace uses of heap_open et al with the corresponding table_* function. ... Author: Andres Freund Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de	7 years ago
Andres Freund	4c850ecec6	Don't include heapam.h from others headers. ... heapam.h previously was included in a number of widely used headers (e.g. execnodes.h, indirectly in executor.h, ...). That's problematic on its own, as heapam.h contains a lot of low-level details that don't need to be exposed that widely, but becomes more problematic with the upcoming introduction of pluggable table storage - it seems inappropriate for heapam.h to be included that widely afterwards. heapam.h was largely only included in other headers to get the HeapScanDesc typedef (which was defined in heapam.h, even though HeapScanDescData is defined in relscan.h). The better solution here seems to be to just use the underlying struct (forward declared where necessary). Similar for BulkInsertState. Another problem was that LockTupleMode was used in executor.h - parts of the file tried to cope without heapam.h, but due to the fact that it indirectly included it, several subsequent violations of that goal were not not noticed. We could just reuse the approach of declaring parameters as int, but it seems nicer to move LockTupleMode to lockoptions.h - that's not a perfect location, but also doesn't seem bad. As a number of files relied on implicitly included heapam.h, a significant number of files grew an explicit include. It's quite probably that a few external projects will need to do the same. Author: Andres Freund Reviewed-By: Alvaro Herrera Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de	7 years ago
Bruce Momjian	97c39498e5	Update copyright for 2019 ... Backpatch-through: certain files through 9.4	7 years ago
Peter Eisentraut	ae4472c619	Remove obsolete IndexIs* macros ... Remove IndexIsValid(), IndexIsReady(), IndexIsLive() in favor of accessing the index structure directly. These macros haven't been used consistently, and the original reason of maintaining source compatibility with PostgreSQL 9.2 is gone. Discussion: https://www.postgresql.org/message-id/flat/d419147c-09d4-6196-5d9d-0234b230880a%402ndquadrant.com	7 years ago
Michael Paquier	730422afcd	Fix some errhint and errdetail strings missing a period ... As per the error message style guide of the documentation, those should be full sentences. Author: Daniel Gustafsson Reviewed-by: Michael Paquier, Álvaro Herrera Discussion: https://1E8D49B4-16BC-4420-B4ED-58501D9E076B@yesql.se	7 years ago
Tom Lane	bdf46af748	Post-feature-freeze pgindent run. ... Discussion: https://postgr.es/m/15719.1523984266@sss.pgh.pa.us	7 years ago
Teodor Sigaev	f35f30f74b	Add amcheck missing downlink tests. ... Also use palloc0() for main amcheck state, and adjust a few comments. Somehow I pushed old version of patch in commit 4eaf7eaccb, so commit the difference. Peter Geoghegan	7 years ago
Teodor Sigaev	4eaf7eaccb	Add missing and dangling downlink checks to amcheck ... When bt_index_parent_check() is called with the heapallindexed option, allocate a second Bloom filter to fingerprint block numbers that appear in the downlinks of internal pages. Use Bloom filter probes when walking the B-Tree to detect missing downlinks. This can detect subtle problems with page deletion/VACUUM, such as corruption caused by the bug just fixed in commit 6db4b499. The downlink Bloom filter is bound in size by work_mem. Its optimal size is typically far smaller than that of the regular heapallindexed Bloom filter, especially when the index has high fan-out. Author: Peter Geoghegan Reviewer: Teodor Sigaev Discussion: https://postgr.es/m/CAH2-WznUzY4fWTjm1tBB3JpVz8cCfz7k_qVp5BhuPyhivmWJFg@mail.gmail.com	7 years ago
Teodor Sigaev	075aade436	Adjust INCLUDE index truncation comments and code. ... Add several assertions that ensure that we're dealing with a pivot tuple without non-key attributes where that's expected. Also, remove the assertion within _bt_isequal(), restoring the v10 function signature. A similar check will be performed for the page highkey within _bt_moveright() in most cases. Also avoid dropping all objects within regression tests, to increase pg_dump test coverage for INCLUDE indexes. Rather than using infrastructure that's generally intended to be used with reference counted heap tuple descriptors during truncation, use the same function that was introduced to store flat TupleDescs in shared memory (we use a temp palloc'd buffer). This isn't strictly necessary, but seems more future-proof than the old approach. It also lets us avoid including rel.h within indextuple.c, which was arguably a modularity violation. Also, we now call index_deform_tuple() with the truncated TupleDesc, not the source TupleDesc, since that's more robust, and saves a few cycles. In passing, fix a memory leak by pfree'ing truncated pivot tuple memory during CREATE INDEX. Also pfree during a page split, just to be consistent. Refactor _bt_check_natts() to be more readable. Author: Peter Geoghegan with some editorization by me Reviewed by: Alexander Korotkov, Teodor Sigaev Discussion: https://www.postgresql.org/message-id/CAH2-Wz%3DkCWuXeMrBCopC-tFs3FbiVxQNjjgNKdG2sHxZ5k2y3w%40mail.gmail.com	8 years ago
Teodor Sigaev	8224de4f42	Indexes with INCLUDE columns and their support in B-tree ... This patch introduces INCLUDE clause to index definition. This clause specifies a list of columns which will be included as a non-key part in the index. The INCLUDE columns exist solely to allow more queries to benefit from index-only scans. Also, such columns don't need to have appropriate operator classes. Expressions are not supported as INCLUDE columns since they cannot be used in index-only scans. Index access methods supporting INCLUDE are indicated by amcaninclude flag in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause. In B-tree indexes INCLUDE columns are truncated from pivot index tuples (tuples located in non-leaf pages and high keys). Therefore, B-tree indexes now might have variable number of attributes. This patch also provides generic facility to support that: pivot tuples contain number of their attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating that. This facility will simplify further support of index suffix truncation. The changes of above are backward-compatible, pg_upgrade doesn't need special handling of B-tree indexes for that. Bump catalog version Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes, David Rowley, Alexander Korotkov Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru	8 years ago
Teodor Sigaev	857f9c36cd	Skip full index scan during cleanup of B-tree indexes when possible ... Vacuum of index consists from two stages: multiple (zero of more) ambulkdelete calls and one amvacuumcleanup call. When workload on particular table is append-only, then autovacuum isn't intended to touch this table. However, user may run vacuum manually in order to fill visibility map and get benefits of index-only scans. Then ambulkdelete wouldn't be called for indexes of such table (because no heap tuples were deleted), only amvacuumcleanup would be called In this case, amvacuumcleanup would perform full index scan for two objectives: put recyclable pages into free space map and update index statistics. This patch allows btvacuumclanup to skip full index scan when two conditions are satisfied: no pages are going to be put into free space map and index statistics isn't stalled. In order to check first condition, we store oldest btpo_xact in the meta-page. When it's precedes RecentGlobalXmin, then there are some recyclable pages. In order to check second condition we store number of heap tuples observed during previous full index scan by cleanup. If fraction of newly inserted tuples is less than vacuum_cleanup_index_scale_factor, then statistics isn't considered to be stalled. vacuum_cleanup_index_scale_factor can be defined as both reloption and GUC (default). This patch bumps B-tree meta-page version. Upgrade of meta-page is performed "on the fly": during VACUUM meta-page is rewritten with new version. No special handling in pg_upgrade is required. Author: Masahiko Sawada, Alexander Korotkov Review by: Peter Geoghegan, Kyotaro Horiguchi, Alexander Korotkov, Yura Sokolov Discussion: https://www.postgresql.org/message-id/flat/CAD21AoAX+d2oD_nrd9O2YkpzHaFr=uQeGr9s1rKC3O4ENc568g@mail.gmail.com	8 years ago
Andres Freund	7f563c09f8	Add amcheck verification of heap relations belonging to btree indexes. ... Add a new, optional, capability to bt_index_check() and bt_index_parent_check(): check that each heap tuple that should have an index entry does in fact have one. The extra checking is performed at the end of the existing nbtree checks. This is implemented by using a Bloom filter data structure. The implementation performs set membership tests within a callback (the same type of callback that each index AM registers for CREATE INDEX). The Bloom filter is populated during the initial index verification scan. Reusing the CREATE INDEX infrastructure allows the new verification option to automatically benefit from the heap consistency checks that CREATE INDEX already performs. CREATE INDEX does thorough sanity checking of HOT chains, so the new check actually manages to detect problems in heap-only tuples. Author: Peter Geoghegan Reviewed-By: Pavan Deolasee, Andres Freund Discussion: https://postgr.es/m/CAH2-Wzm5VmG7cu1N-H=nnS57wZThoSDQU+F5dewx3o84M+jY=g@mail.gmail.com	8 years ago
Bruce Momjian	9d4649ca49	Update copyright for 2018 ... Backpatch-through: certain files through 9.3	8 years ago
Tom Lane	9fa6f00b13	Rethink MemoryContext creation to improve performance. ... This patch makes a number of interrelated changes to reduce the overhead involved in creating/deleting memory contexts. The key ideas are: * Include the AllocSetContext header of an aset.c context in its first malloc request, rather than allocating it separately in TopMemoryContext. This means that we now always create an initial or "keeper" block in an aset, even if it never receives any allocation requests. * Create freelists in which we can save and recycle recently-destroyed asets (this idea is due to Robert Haas). * In the common case where the name of a context is a constant string, just store a pointer to it in the context header, rather than copying the string. The first change eliminates a palloc/pfree cycle per context, and also avoids bloat in TopMemoryContext, at the price that creating a context now involves a malloc/free cycle even if the context never receives any allocations. That would be a loser for some common usage patterns, but recycling short-lived contexts via the freelist eliminates that pain. Avoiding copying constant strings not only saves strlen() and strcpy() overhead, but is an essential part of the freelist optimization because it makes the context header size constant. Currently we make no attempt to use the freelist for contexts with non-constant names. (Perhaps someday we'll need to think harder about that, but in current usage, most contexts with custom names are long-lived anyway.) The freelist management in this initial commit is pretty simplistic, and we might want to refine it later --- but in common workloads that will never matter because the freelists will never get full anyway. To create a context with a non-constant name, one is now required to call AllocSetContextCreateExtended and specify the MEMCONTEXT_COPY_NAME option. AllocSetContextCreate becomes a wrapper macro, and it includes a test that will complain about non-string-literal context name parameters on gcc and similar compilers. An unfortunate side effect of making AllocSetContextCreate a macro is that one is now *required* to use the size parameter abstraction macros (ALLOCSET_DEFAULT_SIZES and friends) with it; the pre-9.6 habit of writing out individual size parameters no longer works unless you switch to AllocSetContextCreateExtended. Internally to the memory-context-related modules, the context creation APIs are simplified, removing the rather baroque original design whereby a context-type module called mcxt.c which then called back into the context-type module. That saved a bit of code duplication, but not much, and it prevented context-type modules from exercising control over the allocation of context headers. In passing, I converted the test-and-elog validation of aset size parameters into Asserts to save a few more cycles. The original thought was that callers might compute size parameters on the fly, but in practice nobody does that, so it's useless to expend cycles on checking those numbers in production builds. Also, mark the memory context method-pointer structs "const", just for cleanliness. Discussion: https://postgr.es/m/2264.1512870796@sss.pgh.pa.us	8 years ago
Tom Lane	eb5c404b17	Minor code-cleanliness improvements for btree. ... Make the btree page-flags test macros (P_ISLEAF and friends) return clean boolean values, rather than values that might not fit in a bool. Use them in a few places that were randomly referencing the flag bits directly. In passing, change access/nbtree/'s only direct use of BUFFER_LOCK_SHARE to BT_READ. (Some think we should go the other way, but as long as we have BT_READ/BT_WRITE, let's use them consistently.) Masahiko Sawada, reviewed by Doug Doole Discussion: https://postgr.es/m/CAD21AoBmWPeN=WBB5Jvyz_Nt3rmW1ebUyAnk3ZbJP3RMXALJog@mail.gmail.com	8 years ago
Tom Lane	382ceffdf7	Phase 3 of pgindent updates. ... Don't move parenthesized lines to the left, even if that means they flow past the right margin. By default, BSD indent lines up statement continuation lines that are within parentheses so that they start just to the right of the preceding left parenthesis. However, traditionally, if that resulted in the continuation line extending to the right of the desired right margin, then indent would push it left just far enough to not overrun the margin, if it could do so without making the continuation line start to the left of the current statement indent. That makes for a weird mix of indentations unless one has been completely rigid about never violating the 80-column limit. This behavior has been pretty universally panned by Postgres developers. Hence, disable it with indent's new -lpl switch, so that parenthesized lines are always lined up with the preceding left paren. This patch is much less interesting than the first round of indent changes, but also bulkier, so I thought it best to separate the effects. Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us	8 years ago
Andres Freund	fcd8d25d38	amcheck: editorialize variable name & comment. ... No exclusive lock is taken anymore...	9 years ago
Andres Freund	3717dc149e	Add amcheck extension to contrib. ... This is the beginning of a collection of SQL-callable functions to verify the integrity of data files. For now it only contains code to verify B-Tree indexes. This adds two SQL-callable functions, validating B-Tree consistency to a varying degree. Check the, extensive, docs for details. The goal is to later extend the coverage of the module to further access methods, possibly including the heap. Once checks for additional access methods exist, we'll likely add some "dispatch" functions that cover multiple access methods. Author: Peter Geoghegan, editorialized by Andres Freund Reviewed-By: Andres Freund, Tomas Vondra, Thomas Munro, Anastasia Lubennikova, Robert Haas, Amit Langote Discussion: CAM3SWZQzLMhMwmBqjzK+pRKXrNUZ4w90wYMUWfkeV8mZ3Debvw@mail.gmail.com	9 years ago