This commit adds new parameter to VACUUM command, TRUNCATE,
which specifies that VACUUM should attempt to truncate off
any empty pages at the end of the table and allow the disk space
for the truncated pages to be returned to the operating system.
This parameter, if specified, overrides the vacuum_truncate
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Author: Fujii Masao
Reviewed-by: Julien Rouhaud, Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoD+qtrSDL=GSma4Wd3kLYLeRC0hPna-YAdkDeV4z156vg@mail.gmail.com
The SQL keywords table in the documentation had until now been
generated by some ad hoc scripting outside the source tree once for
each major release. This changes it to an automated process.
We have the PostgreSQL keywords available in a parseable format in
parser/kwlist.h. For the relevant SQL standard versions, keep the
keyword lists in new text files. A new script
generate-keywords-table.pl pulls it all together and produces a
DocBook table.
The final output in the documentation should be identical after this
change.
Discussion: https://www.postgresql.org/message-id/flat/07daeadd-8c82-0d95-5e19-e350502cb749%402ndquadrant.com
This feature was using a process local map to track the first few blocks
in the relation. The map was reset each time we get the block with enough
freespace. It was discussed that it would be better to track this map on
a per-relation basis in relcache and then invalidate the same whenever
vacuum frees up some space in the page or when FSM is created. The new
design would be better both in terms of API design and performance.
List of commits reverted, in reverse chronological order:
06c8a5090e Improve code comments in b0eaa4c51b.
13e8643bfc During pg_upgrade, conditionally skip transfer of FSMs.
6f918159a9 Add more tests for FSM.
9c32e4c350 Clear the local map when not used.
29d108cdec Update the documentation for FSM behavior..
08ecdfe7e5 Make FSM test portable.
b0eaa4c51b Avoid creation of the free space map for small heap relations.
Discussion: https://postgr.es/m/20190416180452.3pm6uegx54iitbt5@alap3.anarazel.de
The interaction of these parameters was a bit confused/confusing,
and in fact v11 entirely misses the opportunity to apply partition
constraints when a partition is accessed directly (rather than
indirectly from its parent).
In HEAD, establish the principle that enable_partition_pruning controls
partition pruning and nothing else. When accessing a partition via its
parent, we do partition pruning (if enabled by enable_partition_pruning)
and then there is no need to consider partition constraints in the
constraint_exclusion logic. When accessing a partition directly, its
partition constraints are applied by the constraint_exclusion logic,
only if constraint_exclusion = on.
In v11, we can't have such a clean division of these GUCs' effects,
partly because we don't want to break compatibility too much in a
released branch, and partly because the clean coding requires
inheritance_planner to have applied partition pruning to a partitioned
target table, which it doesn't in v11. However, we can tweak things
enough to cover the missed case, which seems like a good idea since
it's potentially a performance regression from v10. This patch keeps
v11's previous behavior in which enable_partition_pruning overrides
constraint_exclusion for an inherited target table, though.
In HEAD, also teach relation_excluded_by_constraints that it's okay to use
inheritable constraints when trying to prune a traditional inheritance
tree. This might not be thought worthy of effort given that that feature
is semi-deprecated now, but we have enough infrastructure that it only
takes a couple more lines of code to do it correctly.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/9813f079-f16b-61c8-9ab7-4363cab28d80@lab.ntt.co.jp
Discussion: https://postgr.es/m/29069.1555970894@sss.pgh.pa.us
This fixes a couple of grammar mistakes, typos and inconsistencies in
the documentation. Particularly, the configuration parsing allows only
"kB" to mean kilobyte but there were references in the docs to "KB".
Some instances of the latter are still in the code comments. Some
parameter values were mentioned with "Minus-one", and using directly
"-1" with proper markups is more helpful to the reader.
Some of these have been pointed out by Justin, and some others are
things I bumped into.
Author: Justin Pryzby, Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20190330224333.GQ5815@telsasoft.com
Recently added guidance on adding SVG images to the documentation
sources lacks advice on making the images responsive when rendered
in a variety of media types and viewports. Add some.
Patch by Jonathan Katz with some editorialization by me.
Author: Jonathan Katz
Discussion: https://postgr.es/m/6358ae6f-7191-a02b-e7b5-68050636ae71@postgresql.org
The documentation includes a section about index maintenance and
reindexing, mentioning a set of steps based on CREATE INDEX CONCURRENTLY
and ALTER TABLE (for constraint dependencies) to emulate REINDEX
CONCURRENTLY. Now that REINDEX CONCURRENTLY is supported, let's just
directly mention it instead.
Reported-by: Peter Geoghegan
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Tom Lane
Discussion: https://postgr.es/m/CAH2-WzmEL168t6w29aKrKXtpq9-apcmp0HC7K-fKt6ZgLXV6Dg@mail.gmail.com
Commit ca4103025d left a few loose ends. The most important one
(broken pg_dump output) is already fixed by virtue of commit
3b23552ad8, but some things remained:
* When ALTER TABLE rewrites tables, the indexes must remain in the
tablespace they were originally in. This didn't work because
index recreation during ALTER TABLE runs manufactured SQL (yuck),
which runs afoul of default_tablespace in competition with the parent
relation tablespace. To fix, reset default_tablespace to the empty
string temporarily, and add the TABLESPACE clause as appropriate.
* Setting a partitioned rel's tablespace to the database default is
confusing; if it worked, it would direct the partitions to that
tablespace regardless of default_tablespace. But in reality it does
not work, and making it work is a larger project. Therefore, throw
an error when this condition is detected, to alert the unwary.
Add some docs and tests, too.
Author: Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f_1c260nOt_vBJ067AZ3JXptXVRohDVMLEBmudX1YEx-A@mail.gmail.com
Commit 3d956d9562 added support for update row movement in postgres_fdw.
This patch fixes the following issues introduced by that commit:
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel that would be updated later, the UPDATE that
used a direct modification plan modified those routed rows incorrectly
because those routed rows were visible to the later UPDATE command.
The right fix for this would be to have some way in postgres_fdw in
which the later UPDATE command ignores those routed rows, but it seems
hard to do so with the current infrastructure. For now throw an error
in that case.
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel, fmstate created for the UPDATE that used a
non-direct modification plan was mistakenly overridden by another
fmstate created for inserting those routed rows into the partition.
This caused 1) server crash when the partition would be updated later,
and 2) resource leak when the partition had been already updated. To
avoid that, adjust the treatment of the fmstate for the inserting. As
for #1, since we would also have the incorrectness issue as mentioned
above, error out in that case as well.
Update the docs to mention that postgres_fdw currently does not handle
the case where a remote partition chosen to insert a routed row into is
also an UPDATE subplan target rel that will be updated later.
Author: Amit Langote and Etsuro Fujita
Reviewed-by: Amit Langote
Backpatch-through: 11 where row movement in postgres_fdw was added
Discussion: https://postgr.es/m/21e7eaa4-0d4d-20c2-a1f7-c7e96f4ce440@lab.ntt.co.jp
This commit adds the description that "non-exclusive" pg_start_backup
and pg_stop_backup can be executed even during recovery. Previously
it was wrongly documented that those functions are not allowed to be
executed during recovery.
Back-patch to 9.6 where non-exclusive backup API was added.
Discussion: https://postgr.es/m/CAHGQGwEuAYrEX7Yhmf2MCrTK81HDkkg-JqsOUh8zw6+zYC5zzw@mail.gmail.com
The GSSAPI encryption patch neglected to update the protocol
documentation to describe how to set up a GSSAPI encrypted connection
from a client to the server, so fix that by adding the appropriate
documentation to protocol.sgml.
The tests added for encryption support were overly long and couldn't be
run in parallel due to race conditions; this was largely because each
test was setting up its own KDC to perform the tests. Instead, merge
the authentication tests and the encryption tests into the original
test, where we only create one KDC to run the tests with. Also, have
the tests check what the server's opinion is of the connection and if it
was GSS authenticated or encrypted using the pg_stat_gssapi view.
In passing, fix the libpq label for GSSENC-Mode to be consistent with
the "PGGSSENCMODE" environment variable.
Missing protocol documentation pointed out by Michael Paquier.
Issues with the tests pointed out by Tom Lane and Peter Eisentraut.
Refactored tests and added documentation by me.
Reviewed by Robbie Harwood (protocol documentation) and Michael Paquier
(rework of the tests).
* Remove one unnecessary pg_class join in SQL command. Not needed,
because we use a regclass cast instead.
* Doc: refer to "partitioned relations" rather than specifically tables,
since indexes are also displayed.
* Rename "On table" column to "Table", for consistency with \di.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20190407212525.GB10080@telsasoft.com
Returning 0 could falsely indicate that there is no problem. NULL
correctly indicates that there is no information about potential
problems.
Also return 0 as numbackends instead of NULL for shared objects (as no
connection can be made to a shared object only).
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Per discussion with others, allowing REINDEX INDEX CONCURRENTLY to work
for invalid indexes when working directly on them can have a lot of
value to unlock situations with invalid indexes without having to use a
dance involving DROP INDEX followed by an extra CREATE INDEX
CONCURRENTLY (which would not work for indexes with constraint
dependency anyway). This also does not create extra bloat on the
relation involved as this works on individual indexes, so let's enable
it.
Note that REINDEX TABLE CONCURRENTLY still bypasses invalid indexes as
we don't want to bloat the number of indexes defined on a relation in
the event of multiple and successive failures of REINDEX CONCURRENTLY.
More regression tests are added to cover those behaviors, using an
invalid index created with CREATE INDEX CONCURRENTLY.
Reported-by: Dagfinn Ilmari Mannsåker, Álvaro Herrera
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/20190411134947.GA22043@alvherre.pgsql
Turn on the previously disabled automatic scaling of images in HTML
output. To avoid images looking too large on nowadays-normal screens,
restrict the width to 75% on such screens.
Some work is still necessary because SVG images without a viewBox
still won't scale, but that will a separate patch.
Discussion: https://www.postgresql.org/message-id/flat/6d2442d1-84a2-36ef-e014-b6d1ece8a139%40postgresql.org
This adds a row to the pg_stat_database view with datoid 0 and datname
NULL for those objects that are not in a database. This was added
particularly for checksums, but we were already tracking more satistics
for these objects, just not returning it.
Also add a checksum_last_failure column that holds the timestamptz of
the last checksum failure that occurred in a database (or in a
non-dataabase file), if any.
Author: Julien Rouhaud <rjuju123@gmail.com>
Explain that it is not enforced that querying a generated column
returns data that is consistent with the data that was stored. This
is similar to the note about constraints nearby.
Reported-by: Amit Langote <amitlangote09@gmail.com>
vacuum_truncate controls whether vacuum tries to truncate off
any empty pages at the end of the table. Previously vacuum always
tried to do the truncation. However, the truncation could cause
some problems; for example, ACCESS EXCLUSIVE lock needs to
be taken on the table during the truncation and can cause
the query cancellation on the standby even if hot_standby_feedback
is true. Setting this reloption to false can be helpful to avoid
such problems.
Author: Tsunakawa Takayuki
Reviewed-By: Julien Rouhaud, Masahiko Sawada, Michael Paquier, Kirk Jamison and Fujii Masao
Discussion: https://postgr.es/m/CAHGQGwE5UqFqSq1=kV3QtTUtXphTdyHA-8rAj4A=Y+e4kyp3BQ@mail.gmail.com
The new command lists partitioned relations (tables and/or indexes),
possibly with their sizes, possibly including partitioned partitions;
their parents (if not top-level); if indexes show the tables they belong
to; and their descriptions.
While there are various possible improvements to this, having it in this
form is already a great improvement over not having any way to obtain
this report.
Author: Pavel Stěhule, with help from Mathias Brossard, Amit Langote and
Justin Pryzby.
Reviewed-by: Amit Langote, Mathias Brossard, Melanie Plageman,
Michaël Paquier, Álvaro Herrera
This uses the same infrastructure that the CREATE INDEX progress
reporting uses. Add a column to pg_stat_progress_create_index to
report the OID of the index being worked on. This was not necessary
for CREATE INDEX, but it's useful for REINDEX.
Also edit the phase descriptions a bit to be more consistent with the
source code comments.
Discussion: https://www.postgresql.org/message-id/ef6a6757-c36a-9e81-123f-13b19e36b7d7%402ndquadrant.com
Similarly to the set of parameters for keepalive, a connection parameter
for libpq is added as well as a backend GUC, called tcp_user_timeout.
Increasing the TCP user timeout is useful to allow a connection to
survive extended periods without end-to-end connection, and decreasing
it allows application to fail faster. By default, the parameter is 0,
which makes the connection use the system default, and follows a logic
close to the keepalive parameters in its handling. When connecting
through a Unix-socket domain, the parameters have no effect.
Author: Ryohei Nagaura
Reviewed-by: Fabien Coelho, Robert Haas, Kyotaro Horiguchi, Kirk
Jamison, Mikalai Keida, Takayuki Tsunakawa, Andrei Yahorau
Discussion: https://postgr.es/m/EDA4195584F5064680D8130B1CA91C45367328@G01JPEXMBYT04
This allows the user to create duplicates of existing replication slots,
either logical or physical, and even changing properties such as whether
they are temporary or the output plugin used.
There are multiple uses for this, such as initializing multiple replicas
using the slot for one base backup; when doing investigation of logical
replication issues; and to select a different output plugins.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Andres Freund, Petr Jelinek
Discussion: https://postgr.es/m/CAD21AoAm7XX8y_tOPP6j4Nzzch12FvA1wPqiO690RCk+uYVstg@mail.gmail.com
The limitations that it is not allowed to create/attach a foreign table
as a partition of an indexed partitioned table were not documented.
Reported-By: Stepan Yankevych
Author: Etsuro Fujita
Reviewed-By: Amit Langote
Backpatch-through: 11 where partitioned index was introduced
Discussion: https://postgr.es/m/1553869152.858391073.5f8m3n0x@frv53.fwdcdn.com
There was some confusion over the format of the error message returned
from the server during GSSAPI startup; specifically, it was expected
that a length would be returned when, in reality, at this early stage in
the startup sequence, no length is returned from the server as part of
an error message.
Correct the client-side code for dealing with error messages sent by the
server during startup by simply reading what's available into our
buffer, after we've discovered it's an error message, and then reporting
back what was returned.
In passing, also add in documentation of the environment variable
PGGSSENCMODE which was missed previously, and adjust the code to look
for the PGGSSENCMODE variable (the environment variable change was
missed in the prior GSSMODE -> GSSENCMODE commit).
Error-handling issue discovered by Peter Eisentraut, the rest were items
discovered during testing of the error handling.
Since 11, it is possible to use a non-superuser role when using an
online source cluster with pg_rewind as long as the role has proper
permissions to execute on the source all the functions used by
pg_rewind, and the documentation stated that a superuser is necessary.
Let's add at the same time all the details needed to create such a
role.
A second confusion which comes a lot from users is that it is necessary
to issue a checkpoint on a freshly-promoted standby so as its control
file has up-to-date timeline information which is used by pg_rewind to
validate the operation. Let's document that properly. This is
back-patched down to 9.5 where pg_rewind has been introduced.
Author: Michael Paquier
Reviewed-by: Magnus Hagander
Discussion: https://postgr.es/m/CABUevEz5bpvbwVsYCaSMV80CBZ5-82nkMzbb+Bu=h1m=rLdn=g@mail.gmail.com
Backpatch-through: 9.5
Fujii Masao