This patch providies for support for password protected SSL client
keys in libpq, and for DER format keys, both encrypted and unencrypted.
There is a new connection parameter sslpassword, which is supplied to
the OpenSSL libraries via a callback function. The callback function can
also be set by an application by calling PQgetSSLKeyPassHook(). There is
also a function to retreive the connection setting, PQsslpassword().
Craig Ringer and Andrew Dunstan
Reviewed by: Greg Nancarrow
Discussion: https://postgr.es/m/f7ee88ed-95c4-95c1-d4bf-7b415363ab62@2ndQuadrant.com
Make allow_system_table_mods settable at run time by superusers. It
was previously postmaster start only.
We don't want to make system catalog DDL wide-open, but there are
occasionally useful things to do like setting reloptions or statistics
on a busy system table, and blocking those doesn't help anyone. Also,
this enables the possibility of writing a test suite for this setting.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8b00ea5e-28a7-88ba-e848-21528b632354%402ndquadrant.com
This build option was once useful to maintain compatibility with
version-0 functions, but those are no longer supported, so this option
is no longer useful for end users. We keep the option available to
developers in pg_config_manual.h so that it is easy to test the
pass-by-reference code paths without having to fire up a 32-bit
machine.
Discussion: https://www.postgresql.org/message-id/flat/f3e1e576-2749-bbd7-2d57-3f9dcf75255a@2ndquadrant.com
Up to now, whatever you'd edited was put back into the query buffer
but not redisplayed, which is less than user-friendly. But we can
improve that just by printing the text along with a prompt, if we
enforce that the editing result ends with a newline (which it
typically would anyway). You then continue typing more lines if
you want, or you can type ";" or do \g or \r or another \e.
This is intentionally divorced from readline's processing,
for simplicity and so that it works the same with or without
readline enabled. We discussed possibly integrating things
more closely with readline; but that seems difficult, uncertainly
portable across different readline and libedit versions, and
of limited real benefit anyway. Let's try the simple way and
see if it's good enough.
Patch by me, thanks to Fabien Coelho and Laurenz Albe for review
Discussion: https://postgr.es/m/13192.1572318028@sss.pgh.pa.us
This adds the statistics about transactions spilled to disk from
ReorderBuffer. Users can query the pg_stat_replication view to check
these stats.
Author: Tomas Vondra, with bug-fixes and minor changes by Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Specifying '-f' will add the 'force' option to the DROP DATABASE command
sent to the server. This will try to terminate all existing connections
to the target database before dropping it.
Author: Pavel Stehule
Reviewed-by: Vignesh C and Amit Kapila
Discussion: https://postgr.es/m/CAP_rwwmLJJbn70vLOZFpxGw3XD7nLB_7+NKz46H5EOO2k5H7OQ@mail.gmail.com
The existing text stated that "Default privileges that are specified
per-schema are added to whatever the global default privileges are for
the particular object type". However, that bare-bones observation is
not quite clear enough, as demonstrated by the complaint in bug #16124.
Flesh it out by stating explicitly that you can't revoke built-in
default privileges this way, and by providing an example to drive
the point home.
Back-patch to all supported branches, since it's been like this
from the beginning.
Discussion: https://postgr.es/m/16124-423d8ee4358421bc@postgresql.org
Instead of deciding to serialize a transaction merely based on the
number of changes in that xact (toplevel or subxact), this makes
the decisions based on amount of memory consumed by the changes.
The memory limit is defined by a new logical_decoding_work_mem GUC,
so for example we can do this
SET logical_decoding_work_mem = '128kB'
to reduce the memory usage of walsenders or set the higher value to
reduce disk writes. The minimum value is 64kB.
When adding a change to a transaction, we account for the size in
two places. Firstly, in the ReorderBuffer, which is then used to
decide if we reached the total memory limit. And secondly in the
transaction the change belongs to, so that we can pick the largest
transaction to evict (and serialize to disk).
We still use max_changes_in_memory when loading changes serialized
to disk. The trouble is we can't use the memory limit directly as
there might be multiple subxact serialized, we need to read all of
them but we don't know how many are there (and which subxact to
read first).
We do not serialize the ReorderBufferTXN entries, so if there is a
transaction with many subxacts, most memory may be in this type of
objects. Those records are not included in the memory accounting.
We also do not account for INTERNAL_TUPLECID changes, which are
kept in a separate list and not evicted from memory. Transactions
with many CTID changes may consume significant amounts of memory,
but we can't really do much about that.
The current eviction algorithm is very simple - the transaction is
picked merely by size, while it might be useful to also consider age
(LSN) of the changes for example. With the new Generational memory
allocator, evicting the oldest changes would make it more likely
the memory gets actually pfreed.
The logical_decoding_work_mem can be set in postgresql.conf, in which
case it serves as the default for all publishers on that instance.
Author: Tomas Vondra, with changes by Dilip Kumar and Amit Kapila
Reviewed-by: Dilip Kumar and Amit Kapila
Tested-By: Vignesh C
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Commit 6b76f1bb5 changed all the RADIUS auth parameters to be lists
rather than single values. But its use of SplitIdentifierString
to parse the list format was not very carefully thought through,
because that function thinks it's parsing SQL identifiers, which
means it will (a) downcase the strings and (b) truncate them to
be shorter than NAMEDATALEN. While downcasing should be harmless
for the server names and ports, it's just wrong for the shared
secrets, and probably for the NAS Identifier strings as well.
The truncation aspect is at least potentially a problem too,
though typical values for these parameters would fit in 63 bytes.
Fortunately, we now have a function SplitGUCList that is exactly
the same except for not doing the two unwanted things, so fixing
this is a trivial matter of calling that function instead.
While here, improve the documentation to show how to double-quote
the parameter values. I failed to resist the temptation to do
some copy-editing as well.
Report and patch from Marcos David (bug #16106); doc changes by me.
Back-patch to v10 where the aforesaid commit came in, since this is
arguably a regression from our previous behavior with RADIUS auth.
Discussion: https://postgr.es/m/16106-7d319e4295d08e70@postgresql.org
This new option terminates the other sessions connected to the target
database and then drop it. To terminate other sessions, the current user
must have desired permissions (same as pg_terminate_backend()). We don't
allow to terminate the sessions if prepared transactions, active logical
replication slots or subscriptions are present in the target database.
Author: Pavel Stehule with changes by me
Reviewed-by: Dilip Kumar, Vignesh C, Ibrar Ahmed, Anthony Nowocien,
Ryan Lambert and Amit Kapila
Discussion: https://postgr.es/m/CAP_rwwmLJJbn70vLOZFpxGw3XD7nLB_7+NKz46H5EOO2k5H7OQ@mail.gmail.com
The example of expansion of multiple views claimed that the resulting
subquery nest would not get fully flattened because of an aggregate
function. There's no aggregate in the example, though, only a user
defined function confusingly named MIN(). In a modern server, the
reason for the non-flattening is that MIN() is volatile, but I'm
unsure whether that was true back when this text was written.
Let's reduce the confusion level by using LEAST() instead (which
we didn't have at the time this example was created). And then
we can just say that the planner will flatten the sub-queries, so
the rewrite system doesn't have to.
Noted by Paul Jungwirth. This text is old enough to vote, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/CA+renyXZFnmp9PcvX1EVR2dR=XG5e6E-AELr8AHCNZ8RYrpnPw@mail.gmail.com
The previous statement that using a passphrase disables the ability to
change the server's SSL configuration without a server restart was no
longer completely true since the introduction of
ssl_passphrase_command_supports_reload.
Add some support for automatically showing backtraces in certain error
situations in the server. Backtraces are shown on assertion failure;
also, a new setting backtrace_functions can be set to a list of C
function names, and all ereport()s and elog()s from the mentioned
functions will have backtraces generated. Finally, the function
errbacktrace() can be manually added to an ereport() call to generate a
backtrace for that call.
Authors: Peter Eisentraut, Álvaro Herrera
Discussion: https://postgr.es/m//5f48cb47-bf1e-05b6-7aae-3bf2cd01586d@2ndquadrant.com
Discussion: https://postgr.es/m/CAMsr+YGL+yfWE=JvbUbnpWtrRZNey7hJ07+zT4bYJdVp4Szdrg@mail.gmail.com
Currently, postgres_fdw does not support preparing a remote transaction
for two-phase commit even in the case where the remote transaction is
read-only, but the old error message appeared to imply that that was not
supported only if the remote transaction modified remote tables. Change
the message so as to include the case where the remote transaction is
read-only.
Also fix a comment above the message.
Also add a note about the lack of supporting PREPARE TRANSACTION to the
postgres_fdw documentation.
Reported-by: Gilles Darold
Author: Gilles Darold and Etsuro Fujita
Reviewed-by: Michael Paquier and Kyotaro Horiguchi
Backpatch-through: 9.4
Discussion: https://postgr.es/m/08600ed3-3084-be70-65ba-279ab19618a5%40darold.net
This allows logging a sample of statements, without incurring excessive
log traffic (which may impact performance). This can be useful when
analyzing workloads with lots of short queries.
The sampling is configured using two new GUC parameters:
* log_min_duration_sample - minimum required statement duration
* log_statement_sample_rate - sample rate (0.0 - 1.0)
Only statements with duration exceeding log_min_duration_sample are
considered for sampling. To enable sampling, both those GUCs have to
be set correctly.
The existing log_min_duration_statement GUC has a higher priority, i.e.
statements with duration exceeding log_min_duration_statement will be
always logged, irrespectedly of how the sampling is configured. This
means only configurations
log_min_duration_sample < log_min_duration_statement
do actually sample the statements, instead of logging everything.
Author: Adrien Nayrat
Reviewed-by: David Rowley, Vik Fearing, Tomas Vondra
Discussion: https://postgr.es/m/bbe0a1a8-a8f7-3be2-155a-888e661cc06c@anayrat.info
The docs do say which GUCs can be changed only by superusers, but we
forgot to mention this for the new log_transaction_sample_rate. This
GUC was introduced in PostgreSQL 12, so backpatch accordingly.
Author: Adrien Nayrat
Backpatch-through: 12
Since commit d26a810eb, we've defined bool as being either _Bool from
<stdbool.h>, or "unsigned char"; but that commit overlooked the fact
that probes.d has "#define bool char". For consistency, make it say
"unsigned char" instead. This should be strictly a cosmetic change,
but it seems best to be in sync.
Formally, in the now-normal case where we're using <stdbool.h>, it'd
be better to write "#define bool _Bool". However, then we'd need
some build infrastructure to inject that configuration choice into
probes.d, and it doesn't seem worth the trouble. We only use
<stdbool.h> if sizeof(_Bool) is 1, so having DTrace think that
bool parameters are "unsigned char" should be close enough.
Back-patch to v12 where d26a810eb came in.
Discussion: https://postgr.es/m/CAA4eK1LmaKO7Du9M9Lo=kxGU8sB6aL8fa3sF6z6d5yYYVe3BuQ@mail.gmail.com
This commit allows --init-steps option in pgbench to accept "G" character
meaning server-side data generation as an initialization step.
With "G", only limited queries are sent from pgbench client and
then data is actually generated in the server. This might make
the initialization phase faster if the bandwidth between pgbench client
and the server is low.
Author: Fabien Coelho
Reviewed-by: Anna Endo, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/alpine.DEB.2.21.1904061826420.3678@lancre
Since 898e5e32, this command uses partially ShareUpdateExclusiveLock,
but the docs did not get the call.
Author: Justin Pryzby
Reviewed-by: Amit Langote, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20191028001207.GB23808@telsasoft.com
Backpatch-through: 12
This clarifies more how to use and how to take advantage of constraints
when attaching a new partition.
Author: Justin Pryzby
Reviewed-by: Amit Langote, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20191028001207.GB23808@telsasoft.com
Backpatch-through: 10
When we added the GUC units feature, we didn't make any great effort
to adjust the documentation of individual GUCs; they tended to still
say things like "this is the number of milliseconds that ...", even
though users might prefer to write some other units, and SHOW might
even show the value in other units. Commit 6c9fb69f2 made an effort
to improve this situation, but I thought it made things less readable
by injecting units information in mid-sentence. It also wasn't very
consistent, and did not touch all the GUCs that have units.
To improve matters, standardize on the phrasing "If this value is
specified without units, it is taken as <units>". Also, try to
standardize where this is mentioned, right before the specification
of the default. (In a couple of places, doing that would've required
more rewriting than seemed justified, so I wasn't 100% consistent
about that.) I also tried to use the phrases "amount of time",
"amount of memory", etc rather than describing the contents of GUCs
in other ways, as those were the majority usage in places that weren't
overcommitting to a particular unit. (I left "length of time" alone
in a couple of places, though.)
I failed to resist the temptation to copy-edit some awkward text, too.
Backpatch to v12, like 6c9fb69f2, mainly because v12 hasn't diverged
much from HEAD yet.
Discussion: https://postgr.es/m/15882.1571942223@sss.pgh.pa.us
Remove SQL_LANGUAGES, which was eliminated in SQL:2008, and
SQL_PACKAGES and SQL_SIZING_PROFILES, which were eliminated in
SQL:2011. Since they were dropped by the SQL standard, the
information in them was no longer updated and therefore no longer
useful.
This also removes the feature-package association information in
sql_feature_packages.txt, but for the time begin we are keeping the
information which features are in the Core package (that is, mandatory
SQL features). Maybe at some point someone wants to invent a way to
store that that does not involve using the "package" mechanism
anymore.
Discussion https://www.postgresql.org/message-id/flat/91334220-7900-071b-9327-0c6ecd012017%402ndquadrant.com
Historically, we started the timer (if StatementTimeout > 0) at the
beginning of a simple-Query message and usually let it run until the
end, so that the timeout limit applied to the entire query string,
and intra-string changes of the statement_timeout GUC had no effect.
But, confusingly, a COMMIT within the string would reset the state
and allow a fresh timeout cycle to start with the current setting.
Commit f8e5f156b changed the behavior of statement_timeout for extended
query protocol, and as an apparently-unintended side effect, a change in
the statement_timeout GUC during a multi-statement simple-Query message
might have an effect immediately --- but only if it was going from
"disabled" to "enabled".
This is all pretty confusing, not to mention completely undocumented.
Let's change things so that the timeout is always reset between queries
of a multi-query string, whether they're transaction control commands
or not. Thus the active timeout setting is applied to each query in
the string, separately. This costs a few more cycles if statement_timeout
is active, but it provides much more intuitive behavior, especially if one
changes statement_timeout in one of the queries of the string.
Also, add something to the documentation to explain all this.
Per bug #16035 from Raj Mohite. Although this is a bug fix, I'm hesitant
to back-patch it; conceivably somebody has worked out the old behavior
and is depending on it. (But note that this change should make the
behavior less restrictive in most cases, since the timeout will now
be applied to shorter segments of code.)
Discussion: https://postgr.es/m/16035-456e6e69ebfd4374@postgresql.org
In v11 or before, this setting could not take effect in crash recovery
because it's specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
this setting to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery_min_apply_delay setting.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
Using glibc's version string to detect potential collation definition
changes is not 100% reliable, but it's better than nothing. Currently
this affects only collations explicitly provided by "libc". More work
will be needed to handle the default collation.
Author: Thomas Munro, based on a suggestion from Christoph Berg
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/4b76c6d4-ae5e-0dc6-7d0d-b5c796a07e34%402ndquadrant.com
This fixes multiple areas of the documentation:
- COPY for its past compatibility section.
- SET ROLE mentioning INHERITS instead of INHERIT
- PREPARE referring to stmt_name, that is not present.
- Extension documentation about format name with upgrade scripts.
Backpatch down to 9.4 for the relevant parts.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/bf95233a-9943-b341-e2ff-a860c28af481@gmail.com
Backpatch-through: 9.4
Previously, our docs would say "Specifies the number of milliseconds"
but it wasn't clear that "milliseconds" was merely the default unit.
New text says "Specifies duration (defaults to milliseconds)", which is
clearer.
Reported-by: basil.bourque@gmail.com
Discussion: https://postgr.es/m/15912-2e35e9026f61230b@postgresql.org
Backpatch-through: 12
This includes a couple of changes around the new behavior of pg_rewind
which enforces recovery to happen once on a cluster not shut down
cleanly:
- Some comments and documentation improvements.
- Shutdown the cluster to rewind with immediate mode in all the tests,
this allows to check after the forced recovery behavior which is wanted
as new default.
- Use -F for the forced recovery step, so as postgres does not use
fsync. This was useless as a final sync is done once the tool is done.
Author: Michael Paquier
Reviewed-by: Alexey Kondratov
Discussion: https://postgr.es/m/20191004083721.GA1829@paquier.xyz
Commit aa087ec64 was a bit over-hasty about the doc changes needed
while splitting pg_statistic_ext_data off from pg_statistic_ext.
It duplicated one para and inserted another in what seems to me
to be the wrong section. Fix that up, and in passing do some minor
copy-editing.
Per report from noborusai.
Discussion: https://postgr.es/m/CAAM3qnLXLUz4mOBkqa8jxigpKhKNxzSuvwpjvCRPvO5EqWjxSg@mail.gmail.com
Andrew Dunstan