This commit adds missing index entries for the functions pg_buffercache_numa()
and pg_buffercache_usage_counts() in the pg_buffercache documentation.
It also makes the function titles consistent by adding parentheses after
function names where they were previously missing.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/7d19af4b-7da3-4862-9f52-ff958960bd8d@oss.nttdata.com
Backpatch-through: 18
Logical replication requires reliable conflict detection to maintain data
consistency across nodes. To achieve this, we must prevent premature
removal of tuples deleted by other origins and their associated commit_ts
data by VACUUM, which could otherwise lead to incorrect conflict reporting
and resolution.
This patch introduces a mechanism to retain deleted tuples on the
subscriber during the application of concurrent transactions from remote
nodes. Retaining these tuples allows us to correctly ignore concurrent
updates to the same tuple. Without this, an UPDATE might be misinterpreted
as an INSERT during resolutions due to the absence of the original tuple.
Additionally, we ensure that origin metadata is not prematurely removed by
vacuum freeze, which is essential for detecting update_origin_differs and
delete_origin_differs conflicts.
To support this, a new replication slot named pg_conflict_detection is
created and maintained by the launcher on the subscriber. Each apply
worker tracks its own non-removable transaction ID, which the launcher
aggregates to determine the appropriate xmin for the slot, thereby
retaining necessary tuples.
Conflict information retention (deleted tuples and commit_ts) can be
enabled per subscription via the retain_conflict_info option. This is
disabled by default to avoid unnecessary overhead for configurations that
do not require conflict resolution or logging.
During upgrades, if any subscription on the old cluster has
retain_conflict_info enabled, a conflict detection slot will be created to
protect relevant tuples from deletion when the new cluster starts.
This is a foundational work to correctly detect update_deleted conflict
which will be done in a follow-up patch.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB5716BE80DAEB0EE2A6A5D1F5949D2@OS0PR01MB5716.jpnprd01.prod.outlook.com
The definition of \dRp+ was modified in commit 7054186c4e. This patch
updates the column list and row filter examples to align with the revised
definition.
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed by: Peter Smith <smithpb2250@gmail.com>
Backpatch-through: 18, where it was introduced
Discussion: https://postgr.es/m/CANhcyEUvqkSO6b9zi_fs_BBPEge5acj4mf8QKmq2TX-7axa7EQ@mail.gmail.com
This index AM callback has been introduced in c1ec02be1d and it is
optional, currently only being used by BRIN. Optional callbacks are
documented with NULL as possible value in amapi.h and indexam.sgml, but
this callback has missed this part of the description.
Reported-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/CAHut+PvgYcPmPDi1YdHMJY5upnyGRpc0N8pk1xNB11xDSBwNog@mail.gmail.com
Backpatch-through: 17
When pg_recvlogical receives a SIGHUP signal, it closes the current
output file and reopens a new one. This is useful since it allows us to
rotate the output file by renaming the current file and sending a SIGHUP.
This behavior was previously undocumented. This commit adds
the missing documentation.
Back-patch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Shinya Kato <shinya11.kato@gmail.com>
Discussion: https://postgr.es/m/0977fc4f-1523-4ecd-8a0e-391af4976367@oss.nttdata.com
Backpatch-through: 13
This commit adds a note to the pg_overexplain page that describes
how to use it (LOAD, session_preload_libraries, or
shared_preload_libraries). The new text is mostly lifted from the
auto_explain page. We should probably consider centralizing this
information in the future.
While at it, add a missing "module" to the opening sentence.
Reviewed-by: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/aHVWKM8l8kLlZzgv%40nathan
Backpatch-through: 18
The paragraph for introducing INSERT and COPY discussed how a file
could be used for bulk loading with COPY, without actually showing
what the file would look like. This adds a programlisting for the
file contents.
Backpatch to all supported branches since this example has lacked
the file contents since PostgreSQL 7.2.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/158017814191.19852.15019251381150731439@wrigleys.postgresql.org
Backpatch-through: 13
Avoid dependence on setlocale().
strcoll(), etc., are not called directly; all collation-sensitive
calls should go through pg_locale.c and use the appropriate
provider. By setting LC_COLLATE to C, we avoid accidentally depending
on libc behavior when using a different provider.
No behavior change in the backend, but it's possible that some
extensions will be affected. Such extensions should be updated to use
the pg_locale_t APIs.
Discussion: https://postgr.es/m/9875f7f9-50f1-4b5d-86fc-ee8b03e8c162@eisentraut.org
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
The pgoutput plugin options are described in the logical streaming
replication protocol documentation, but their default values were
previously not mentioned. This made it less convenient for users,
for example, when specifying those options to use pg_recvlogical
with pgoutput plugin.
This commit adds the explanations of the default values for pgoutput
options to improve clarity and usability.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/d2790f10-238d-4cb5-a743-d9d2a9dd900f@oss.nttdata.com
Previously, the documentation described the streaming option as a boolean,
which is outdated since it's no longer a boolean as of protocol version 4.
This could confuse users.
This commit updates the description to remove the "boolean" reference and
clearly list the valid values for the streaming option.
Back-patch to v16, where the streaming option changed to a non-boolean.
Author: Euler Taveira <euler@eulerto.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/8d21fb98-5c25-4dee-8387-e5a62b01ea7d@app.fastmail.com
Backpatch-through: 16
The last_vacuum and vacuum_count fields in pg_stat_all_tables already
state that they do not include VACUUM FULL. However, total_vacuum_time,
which also excludes VACUUM FULL, did not mention this. This could
mislead users into thinking VACUUM FULL time is included.
To address this, this commit updates the documentation for
pg_stat_all_tables to explicitly state that total_vacuum_time does not
count VACUUM FULL.
Back-patched to v18, where total_vacuum_time was introduced.
Additionally, this commit clarifies that n_ins_since_vacuum also
excludes VACUUM FULL. Although n_ins_since_vacuum was added in v13,
we are not back-patching this change to stable branches, as it is
a documentation improvement, not a bug fix.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/2ac375d1-591b-4f1b-a2af-f24335567866@oss.nttdata.com
Backpatch-through: 18
The grammar was a little shaky and confusing here, so word-smith it
a bit. Also, adjust the comments in pg_ident.conf.sample to use the
same terminology as the SGML docs, in particular "DATABASE-USERNAME"
not "PG-USERNAME".
Back-patch appropriate subsets. I did not risk changing
pg_ident.conf.sample in released branches, but it still seems OK
to change it in v18.
Reported-by: Alexey Shishkin <alexey.shishkin@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/175206279327.3157504.12519088928605422253@wrigleys.postgresql.org
Backpatch-through: 13
Minor wordsmithing of the func.sgml paragraph describing
statement_timestamp() and allied functions: don't switch between
"statement" and "command" when those are being used to mean about
the same thing.
Also, add some text to protocol.sgml describing the perhaps-surprising
behavior these functions have in a multi-statement Query message.
Reported-by: P M <petermittere@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/175223006802.3157505.14764328206246105568@wrigleys.postgresql.org
Backpatch-through: 13
This new psql variable can be used to check which service file has been
used for a connection. Like other variables, this can be set in a
PROMPT or reported by an \echo, like these commands:
\echo :SERVICEFILE
\set PROMPT1 '=(%:SERVICEFILE:)%# '
This relies on commits 092f3c63ef and fef6da9e9c to retrieve this
information from the connection's PQconninfoOption.
Author: Ryo Kanbayashi <kanbayashi.dev@gmail.com>
Discussion: https://postgr.es/m/CAKkG4_nCjx3a_F3gyXHSPWxD8Sd8URaM89wey7fG_9g7KBkOCQ@mail.gmail.com
This commit adds the possibility to specify a service file in a
connection string, using a new option called "servicefile". The parsing
of the service file happens so as things are done in this order of
priority:
- The servicefile connection option.
- Environment variable PGSERVICEFILE.
- Default path, depending on the HOME environment.
Note that in the last default case, we need to fill in "servicefile" for
the connection's PQconninfoOption to let clients know which service file
has been used for the connection. Some TAP tests are added, with a few
tweaks required for Windows when using URIs or connection option values,
for the location paths.
Author: Torsten Förtsch <tfoertsch123@gmail.com>
Co-authored-by: Ryo Kanbayashi <kanbayashi.dev@gmail.com>
Discussion: https://postgr.es/m/CAKkG4_nCjx3a_F3gyXHSPWxD8Sd8URaM89wey7fG_9g7KBkOCQ@mail.gmail.com
This option, which is disabled by default, can be used to request
the checkpoint also flush dirty buffers of unlogged relations. As
with the MODE option, the server may consolidate the options for
concurrently requested checkpoints. For example, if one session
uses (FLUSH_UNLOGGED FALSE) and another uses (FLUSH_UNLOGGED TRUE),
the server may perform one checkpoint with FLUSH_UNLOGGED enabled.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
This option may be set to FAST (the default) to request the
checkpoint be completed as fast as possible, or SPREAD to request
the checkpoint be spread over a longer interval (based on the
checkpoint-related configuration parameters). Note that the server
may consolidate the options for concurrently requested checkpoints.
For example, if one session requests a "fast" checkpoint and
another requests a "spread" checkpoint, the server may perform one
"fast" checkpoint.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
This commit adds the boilerplate code for supporting a list of
options in CHECKPOINT commands. No actual options are supported
yet, but follow-up commits will add support for MODE and
FLUSH_UNLOGGED. While at it, this commit refactors the code for
executing CHECKPOINT commands to its own function since it's about
to become significantly larger.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
The new name more accurately reflects the effects of this flag on a
requested checkpoint. Checkpoint-related log messages (i.e., those
controlled by the log_checkpoints configuration parameter) will now
say "fast" instead of "immediate", too. Likewise, references to
"immediate" checkpoints in the documentation have been updated to
say "fast". This is preparatory work for a follow-up commit that
will add a MODE option to the CHECKPOINT command.
Author: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
In the description of StartupMessage, the protocol version was left
3.0. Instead of just updating it, this commit removes the hard coded
protocol version and shows the numbers as an example. This makes that
the part of the doc does not need to be updated when the version is
changed in the future.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://postgr.es/m/20250626.155608.568829483879866256.ishii%40postgresql.org
This commit updates the documentation to clarify that "idle" in
idle_replication_slot_timeout means the replication slot is inactive,
that is, not currently used by any replication connection.
Without this clarification, "idle" could be misinterpreted to mean
that the slot is not advancing or that no data is being streamed,
even if a connection exists.
Back-patch to v18 where idle_replication_slot_timeout was added.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Gunnar Morling <gunnar.morling@googlemail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CADGJaX_0+FTguWpNSpgVWYQP_7MhoO0D8=cp4XozSQgaZ40Odw@mail.gmail.com
Backpatch-through: 18
Previously, the idle_replication_slot_timeout parameter used minutes
as its unit, based on the assumption that values would typically exceed
one minute in production environments. However, this caused unexpected
behavior: specifying a value below 30 seconds would round down to 0,
effectively disabling the timeout. This could be surprising to users.
To allow finer-grained control and avoid such confusion, this commit changes
the unit of idle_replication_slot_timeout to seconds. Larger values can
still be specified easily using standard time suffixes, for example,
'24h' for 24 hours.
Back-patch to v18 where idle_replication_slot_timeout was added.
Reported-by: Gunnar Morling <gunnar.morling@googlemail.com>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CADGJaX_0+FTguWpNSpgVWYQP_7MhoO0D8=cp4XozSQgaZ40Odw@mail.gmail.com
Backpatch-through: 18
Increase the size of the "direct" histogram to 10K elements,
so that we can precisely track loop times up to 10 microseconds.
(Going further than that seems pretty uninteresting, even for
very old and slow machines.)
Relabel "Per loop time" as "Average loop time" for clarity.
Pre-zero the histogram arrays to make sure that they are loaded
into processor cache and any copy-on-write overhead has happened
before we enter the timing loop. Also use unlikely() to keep
the compiler from thinking that the clock-went-backwards case
is part of the hot loop. Neither of these hacks made a lot of
difference on my own machine, but they seem like they might help
on some platforms.
Discussion: https://postgr.es/m/be0339cc-1ae1-4892-9445-8e6d8995a44d@eisentraut.org
This commit adds a new system view that provides information about
entries in the dynamic shared memory (DSM) registry. Specifically,
it returns the name, type, and size of each entry. Note that since
we cannot discover the size of dynamic shared memory areas (DSAs)
and hash tables backed by DSAs (dshashes) without first attaching
to them, the size column is left as NULL for those.
Bumps catversion.
Author: Florents Tselai <florents.tselai@gmail.com>
Reviewed-by: Sungwoo Chang <swchangdev@gmail.com>
Discussion: https://postgr.es/m/4D445D3E-81C5-4135-95BB-D414204A0AB4%40gmail.com
Clarified that the failover steps apply to a specific PostgreSQL subscriber
and added guidance for verifying replication slot synchronization during
planned failover. Additionally, corrected the standby query to avoid false
positives by checking invalidation_reason IS NULL instead of conflicting.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Author: Shveta Malik <shveta.malik@gmail.com>
Backpatch-through: 17, where it was introduced
Discussion: https://www.postgresql.org/message-id/CAExHW5uiZ-fF159=jwBwPMbjZeZDtmcTbN+hd4mrURLCg2uzJg@mail.gmail.com
This routine has been introduced as a shortcut to be able to retrieve a
service name from an active connection, for psql. Per discussion, and
as it is only used by psql, let's remove it to not clutter the libpq API
more than necessary.
The logic in psql is replaced by lookups of PQconninfoOption for the
active connection, instead, updated each time the variables are synced
by psql, the prompt shortcut relying on the variable synced.
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20250706161319.c1.nmisch@google.com
Backpatch-through: 18
Most of our platforms have better-than-microsecond timing resolution,
so the original definition of this program is getting less and less
useful. Make it report nanoseconds not microseconds. Also, add a
second output table that reports the exact observed timing durations,
up to a limit of 1024 ns; and be sure to report the largest observed
duration.
The documentation for this program included a lot of system-specific
details that now seem largely obsolete. Move all that text to the
PG wiki, where perhaps it will be easier to maintain and update.
Also, improve the TAP test so that it actually runs a short standard
run, allowing most of the code to be exercised; its coverage before
was abysmal.
Author: Hannu Krosing <hannuk@google.com>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/be0339cc-1ae1-4892-9445-8e6d8995a44d@eisentraut.org
This commit standardizes the output format for LSNs to ensure consistent
representation across various tools and messages. Previously, LSNs were
inconsistently printed as `%X/%X` in some contexts, while others used
zero-padding. This often led to confusion when comparing.
To address this, the LSN format is now uniformly set to `%X/%08X`,
ensuring the lower 32-bit part is always zero-padded to eight
hexadecimal digits.
Author: Japin Li <japinli@hotmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/ME0P300MB0445CA53CA0E4B8C1879AF84B641A@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
Extend the infrastructure in btree_gin.c to permit cross-type
operators, and add the code to support them for the int2, int4,
and int8 opclasses. (To keep this patch digestible, I left
the other datatypes for a separate patch.) This improves the
usability of btree_gin indexes by allowing them to support the
same set of queries that a regular btree index does.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Discussion: https://postgr.es/m/262624.1738460652@sss.pgh.pa.us
The documentation for pg_replication_slots previously mentioned only
max_slot_wal_keep_size as a condition under which the wal_status column
could show unreserved or lost. However, since commit be87200,
replication slots can also be invalidated due to horizon or wal_level,
and since commit ac0e33136a, idle_replication_slot_timeout can also
trigger this state.
This commit updates the description of the wal_status column to
reflect that max_slot_wal_keep_size is not the only cause of the lost state.
Back-patched to v16, where the additional invalidation cases were introduced.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Discussion: https://postgr.es/m/78b34e84-2195-4f28-a151-5d204a382fdd@oss.nttdata.com
Backpatch-through: 16
If certain constraint characteristic clauses (NO INHERIT, NOT VALID, NOT
ENFORCED) are given to CREATE CONSTRAINT TRIGGER, the resulting error
message is
ERROR: TRIGGER constraints cannot be marked NO INHERIT
which is a bit silly, because these aren't "constraints of type
TRIGGER". Hardcode a better error message to prevent it. This is a
cosmetic fix for quite a fringe problem with no known complaints from
users, so no backpatch.
While at it, silently accept ENFORCED if given.
Author: Amul Sul <sulamul@gmail.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CAAJ_b97hd-jMTS7AjgU6TDBCzDx_KyuKxG+K-DtYmOieg+giyQ@mail.gmail.com
Discussion: https://postgr.es/m/CACJufxHSp2puxP=q8ZtUGL1F+heapnzqFBZy5ZNGUjUgwjBqTQ@mail.gmail.com
The documentation previously stated that the wal_status column is NULL
if restart_lsn is NULL in the pg_replication_slots view. This is incorrect,
and wal_status can be "lost" even when restart_lsn is NULL.
This commit removes the incorrect description.
Back-patched to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Discussion: https://postgr.es/m/c9d23cdc-b5dd-455a-8ee9-f1f24d701d89@oss.nttdata.com
Backpatch-through: 13
The COPY FROM command now accepts a non-negative integer for the HEADER option,
allowing multiple header lines to be skipped. This is useful when the input
contains multi-line headers that should be ignored during data import.
Author: Shinya Kato <shinya11.kato@gmail.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/CAOzEurRPxfzbxqeOPF_AGnAUOYf=Wk0we+1LQomPNUNtyZGBZw@mail.gmail.com
The previous minimum was to maintain support for Python 3.5, but we
now require Python 3.6 anyway (commit 45363fca63), so that reason is
obsolete. A small raise to Meson 0.57 allows getting rid of a fair
amount of version conditionals and silences some future-deprecated
warnings.
With the version bump, the following deprecation warnings appeared and
are fixed:
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.55.0': ExternalProgram.path. use ExternalProgram.full_path() instead
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.56.0': meson.build_root. use meson.project_build_root() or meson.global_build_root() instead.
It turns out that meson 0.57.0 and 0.57.1 are buggy for our use, so
the minimum is actually set to 0.57.2. This is specific to this
version series; in the future we won't necessarily need to be this
precise.
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/42e13eb0-862a-441e-8d84-4f0fd5f6def0%40eisentraut.org
Switch MSVC to use the conforming preprocessor, using the
/Zc:preprocessor option.
This allows us to drop the alternative implementation of
VA_ARGS_NARGS() for the previous "traditional" preprocessor.
This also prepares the way for enabling C11 mode in the future, which
enables the conforming preprocessor by default.
This now requires Visual Studio 2019. The installation documentation
is adjusted accordingly.
Discussion: https://www.postgresql.org/message-id/flat/01a69441-af54-4822-891b-ca28e05b215a%40eisentraut.org
This provides a convenient way to look up a database's OID. For
example, the query
SELECT * FROM pg_shdepend
WHERE dbid = (SELECT oid FROM pg_database
WHERE datname = current_database());
can now be simplified to
SELECT * FROM pg_shdepend
WHERE dbid = current_database()::regdatabase;
Like the regrole type, regdatabase has cluster-wide scope, so we
disallow regdatabase constants from appearing in stored
expressions.
Bumps catversion.
Author: Ian Lawrence Barwick <barwick@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/aBpjJhyHpM2LYcG0%40nathan
When postfix operators where dropped in 1ed6b8956, the CREATE OPERATOR
docs were not updated to make the RIGHTARG argument mandatory in the
grammar.
While at it, make the RIGHTARG docs more concise. Also, the operator
docs were mentioning "infix" in the introduction, while using "binary"
everywhere else.
Author: Christoph Berg <myon@debian.org>
Discussion: https://www.postgresql.org/message-id/flat/aAtpbnQphv4LWAye@msg.df7cb.de
Commit 1546e17f9d accidentally misspelled additionally as
additionaly. Backpatch to v17 to match where the original
commit was backpatched.
Author: Daniel Gustafsson <daniel@yesql.se>
Backpatch-through: 17
This commit renames the pg_recvlogical options --two-phase and
--failover to --enable-two-phase and --enable-failover, respectively.
The new names distinguish these enabling options from action options
like --start and --create-slot, while clearly indicating their purpose
to enable specific logical slot features.
The option --failover is new in PostgreSQL 18 (commit cf2655a902), so
no compatibility break there. The option --two-phase has existed
since PostgreSQL 15 (commit cda03cfed6), so for compatibility we keep
the old option name --two-phase around as deprecated.
Also note that pg_createsubscriber has acquired an --enable-two-phase
option, so this increases consistency across tools.
Co-authored-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/a28f66df-1354-4709-8d63-932ded4cac35@eisentraut.org
We were missing collecting comments for not-null constraints that are
dumped inline with the table definition (i.e., valid ones), because they
aren't represented by a separately dumpable object. Fix by creating
separate TocEntries for the comments.
Co-Authored-By: Jian He <jian.universality@gmail.com>
Co-Authored-By: Álvaro Herrera <alvherre@kurilemu.de>
Reported-By: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-By: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/d50ff977-c728-4e9e-8488-fc2688e08754@oss.nttdata.com
The convention in the documentation for other SQL commands is to
indent continuation lines and sub-clauses in the "Synopsis" section by
4 spaces, so do the same for MERGE.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/CAEZATCV+9tR9+WM-SCcdBEZ3x7WVxUpADD5jX9WeGX97z4LCGA@mail.gmail.com
Backpatch-through: 15
Fujii Masao