The package for the UUID library may be named "uuid" or "ossp-uuid", and
meson.build has been using a single call of dependency() with multiple
names, something only supported since meson 0.60.0.
The minimum version of meson supported by Postgres is 0.57.2 on HEAD,
since f039c22441, and 0.54 on stable branches down to 16.
Author: Oreo Yang <oreo.yang@hotmail.com>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/OS3P301MB01656E6F91539770682B1E77E711A@OS3P301MB0165.JPNP301.PROD.OUTLOOK.COM
Backpatch-through: 16
Per discussion, this compiler suite is no longer maintained, and
it has not been able to compile PostgreSQL since at least PostgreSQL
17.
This removes all the remaining support code for this compiler.
Note that the Solaris operating system continues to be supported, but
using GCC as the compiler.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/a0f817ee-fb86-483a-8a14-b6f7f5991b6e%40eisentraut.org
Followup to 4e1e41733 and 52ecd05ae. oauth-utils.c uses
pthread_sigmask(), requiring -pthread on Debian bullseye at minimum.
Reported-by: Christoph Berg <myon@debian.org>
Tested-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/aK4PZgC0wuwQ5xSK%40msg.df7cb.de
Backpatch-through: 18
This changes configure and meson.build to require at least C11,
instead of the previous C99. The installation documentation is
updated accordingly.
configure.ac previously used AC_PROG_CC_C99 to activate C99. But
there is no AC_PROG_CC_C11 in Autoconf 2.69, because it's too
old. (Also, post-2.69, the AC_PROG_CC_Cnn macros were deprecated and
AC_PROG_CC activates the last supported C mode.) We could update the
required Autoconf version, but that might be a separate project that
no one wants to undertake at the moment. Instead, we open-code the
test for C11 using some inspiration from later Autoconf versions. But
instead of writing an elaborate test program, we keep it simple and
just check __STDC_VERSION__, which should be good enough in practice.
In meson.build, we update the existing C99 test to C11, but again we
just check for __STDC_VERSION__.
This also removes the separate option for the conforming preprocessor
on MSVC, added by commit 8fd9bb1d96, since that is activated
automatically in C11 mode.
Note, we don't use the "official" way to set the C standard in Meson
using the c_std project option, because that is impossible to use
correctly (see <https://github.com/mesonbuild/meson/issues/14717>).
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/01a69441-af54-4822-891b-ca28e05b215a@eisentraut.org
Move the test for compiler options for C99 earlier in meson.build,
before we make use of the compiler for other tests. That way, if any
command-line options are needed, subsequent tests will also use them.
This is at the moment a theoretical problem, but it seems better to
get this correct. It also matches the order in the Autoconf-based
build more closely.
Discussion: https://www.postgresql.org/message-id/flat/01a69441-af54-4822-891b-ca28e05b215a@eisentraut.org
Without using stamp files, meson lists the generated headers as the dependency
for every .c file, bloating build.ninja by more than 2x. Processing all the
dependencies also increases the time to generate build.ninja.
The immediate benefit is that this makes re-configuring and clean builds a bit
faster. The main motivation however is that I have other patches that
introduce additional build targets that further would increase the size of
build.ninja, making re-configuring more noticeably slower.
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/cgkdgvzdpinkacf4v33mky7tbmk467oda5dd4dlmucjjockxzi@xkqfvjoq4uiy
libpq-oauth was missing from the installed_targets list, so
$ ninja clean && ninja install-quiet
failed with the error message
ERROR: File 'src/interfaces/libpq-oauth/libpq-oauth.a' could not be found
It seems a little odd to have to tell Meson what's missing, since it
clearly knows how to build that file during regular installation. But
the "quiet" variant we've created must use --no-rebuild, to avoid
spawning concurrent ninja processes that would step on each other.
Reported-by: Andres Freund <andres@anarazel.de>
Backpatch-through: 18
Discussion: https://postgr.es/m/hbpqdwxkfnqijaxzgdpvdtp57s7gwxa5d6sbxswovjrournlk6%404jnb2gzan4em
The configure checks used two incorrect functions when checking the
presence of some routines in an environment:
- __get_cpuidex() for the check of __cpuidex().
- __get_cpuid() for the check of __cpuid().
This means that Postgres has never been able to detect the presence of
these functions, impacting environments where these exist, like Windows.
Simply fixing the function name does not work. For example, using
configure with MinGW on Windows causes the checks to detect all four of
__get_cpuid(), __get_cpuid_count(), __cpuidex() and __cpuid() to be
available, causing a compilation failure as this messes up with the
MinGW headers as we would include both <intrin.h> and <cpuid.h>.
The Postgres code expects only one in { __get_cpuid() , __cpuid() } and
one in { __get_cpuid_count() , __cpuidex() } to exist. This commit
reshapes the configure checks to do exactly what meson is doing, which
has been working well for us: check one, then the other, but never allow
both to be detected in a given build.
The logic is wrong since 3dc2d62d04 and 792752af4e where these
checks have been introduced (the second case is most likely a copy-pasto
coming from the first case), with meson documenting that the configure
checks were broken. As far as I can see, they are not once applied
consistently with what the code expects, but let's see if the buildfarm
has different something to say. The comment in meson.build is adjusted
as well, to reflect the new reality.
Author: Lukas Fittl <lukas@fittl.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aIgwNYGVt5aRAqTJ@paquier.xyz
Backpatch-through: 13
By default io_uring creates a shared memory mapping for each io_uring
instance, leading to a large number of memory mappings. Unfortunately a large
number of memory mappings slows things down, backend exit is particularly
affected. To address that, newer kernels (6.5) support using user-provided
memory for the memory. By putting the relevant memory into shared memory we
don't need any additional mappings.
On a system with a new enough kernel and liburing, there is no discernible
overhead when doing a pgbench -S -C anymore.
Reported-by: MARK CALLAGHAN <mdcallag@gmail.com>
Reviewed-by: "Burd, Greg" <greg@burd.me>
Reviewed-by: Jim Nasby <jnasby@upgrade.com>
Discussion: https://postgr.es/m/CAFbpF8OA44_UG+RYJcWH9WjF7E3GA6gka3gvH6nsrSnEe9H0NA@mail.gmail.com
Backpatch-through: 18
In b0635bfda, I added an early header check to the Meson OAuth support,
which was intended to duplicate the later checks for
HAVE_SYS_[EVENT|EPOLL]_H. However, I implemented the new test via
check_header() -- which tries to compile -- rather than has_header(),
which just looks for the file's existence.
The distinction matters on OpenBSD, where <sys/event.h> can't be
compiled without including prerequisite headers, so -Dlibcurl=enabled
failed on that platform. Switch to has_header() to fix this.
Note that reviewers expressed concern about the difference between our
Autoconf feature tests (which compile headers) and our Meson feature
tests (which do not). I'm not opposed to aligning the two, but I want to
avoid making bigger changes as part of this fix.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/flat/CAOYmi+kdR218ke2zu74oTJvzYJcqV1MN5=mGAPqZQuc79HMSVA@mail.gmail.com
Backpatch-through: 18
The previous minimum was to maintain support for Python 3.5, but we
now require Python 3.6 anyway (commit 45363fca63), so that reason is
obsolete. A small raise to Meson 0.57 allows getting rid of a fair
amount of version conditionals and silences some future-deprecated
warnings.
With the version bump, the following deprecation warnings appeared and
are fixed:
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.55.0': ExternalProgram.path. use ExternalProgram.full_path() instead
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.56.0': meson.build_root. use meson.project_build_root() or meson.global_build_root() instead.
It turns out that meson 0.57.0 and 0.57.1 are buggy for our use, so
the minimum is actually set to 0.57.2. This is specific to this
version series; in the future we won't necessarily need to be this
precise.
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/42e13eb0-862a-441e-8d84-4f0fd5f6def0%40eisentraut.org
Switch MSVC to use the conforming preprocessor, using the
/Zc:preprocessor option.
This allows us to drop the alternative implementation of
VA_ARGS_NARGS() for the previous "traditional" preprocessor.
This also prepares the way for enabling C11 mode in the future, which
enables the conforming preprocessor by default.
This now requires Visual Studio 2019. The installation documentation
is adjusted accordingly.
Discussion: https://www.postgresql.org/message-id/flat/01a69441-af54-4822-891b-ca28e05b215a%40eisentraut.org
Commit 43da39430 added a dependency on this intrinsic to our
AVX-512 CRC code. It turns out this intrinsic was added to
gcc later than the other ones we were using, so that there
are platforms where the new code fails to compile. Since only
relatively old (pre-gcc-10) compilers are affected, it doesn't
seem worth trying to make the AVX-512 CRC code actually work
on these platforms. Just add the new intrinsic to the configure
probe, so that we'll conclude the code can't be built.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/3350336.1750690281@sss.pgh.pa.us
Per the letter of the C11 standard, one must #define
__STDC_WANT_LIB_EXT1__ as 1 before including <string.h> in order to
have access to memset_s(). It appears that many platforms are lenient
about this, because we weren't doing it and yet the code appeared to
work anyway. But we now find that with -std=c11, macOS is strict and
doesn't declare memset_s, leading to compile failures since we try to
use it anyway. (Given the lack of prior reports, perhaps this is new
behavior in the latest SDK? No matter, we're clearly in the wrong.)
In addition to the immediate problem, which could be fixed merely by
adding the needed #define to explicit_bzero.c, it seems possible that
our configure-time probe for memset_s() could fail in case a platform
implements the function in some odd way due to this spec requirement.
This concern can be fixed in largely the same way that we dealt with
strchrnul() in 6da2ba1d8: switch to using a declaration-based
configure probe instead of a does-it-link probe.
Back-patch to v13 where we started using memset_s().
Reported-by: Lakshmi Narayana Velayudam <dev.narayana.v@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAA4pTnLcKGG78xeOjiBr5yS7ZeE-Rh=FaFQQGOO=nPzA1L8yEA@mail.gmail.com
Backpatch-through: 13
The additional packaging footprint of the OAuth Curl dependency, as well
as the existence of libcurl in the address space even if OAuth isn't
ever used by a client, has raised some concerns. Split off this
dependency into a separate loadable module called libpq-oauth.
When configured using --with-libcurl, libpq.so searches for this new
module via dlopen(). End users may choose not to install the libpq-oauth
module, in which case the default flow is disabled.
For static applications using libpq.a, the libpq-oauth staticlib is a
mandatory link-time dependency for --with-libcurl builds. libpq.pc has
been updated accordingly.
The default flow relies on some libpq internals. Some of these can be
safely duplicated (such as the SIGPIPE handlers), but others need to be
shared between libpq and libpq-oauth for thread-safety. To avoid
exporting these internals to all libpq clients forever, these
dependencies are instead injected from the libpq side via an
initialization function. This also lets libpq communicate the offsets of
PGconn struct members to libpq-oauth, so that we can function without
crashing if the module on the search path came from a different build of
Postgres. (A minor-version upgrade could swap the libpq-oauth module out
from under a long-running libpq client before it does its first load of
the OAuth flow.)
This ABI is considered "private". The module has no SONAME or version
symlinks, and it's named libpq-oauth-<major>.so to avoid mixing and
matching across Postgres versions. (Future improvements may promote this
"OAuth flow plugin" to a first-class concept, at which point we would
need a public API to replace this anyway.)
Additionally, NLS support for error messages in b3f0be788a was
incomplete, because the new error macros weren't being scanned by
xgettext. Fix that now.
Per request from Tom Lane and Bruce Momjian. Based on an initial patch
by Daniel Gustafsson, who also contributed docs changes. The "bare"
dlopen() concept came from Thomas Munro. Many people reviewed the design
and implementation; thank you!
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Wolfgang Walther <walther@technowledgy.de>
Discussion: https://postgr.es/m/641687.1742360249%40sss.pgh.pa.us
Add basic NUMA awareness routines, using a minimal src/port/pg_numa.c
portability wrapper and an optional build dependency, enabled by
--with-libnuma configure option. For now this is Linux-only, other
platforms may be supported later.
A built-in SQL function pg_numa_available() allows checking NUMA
support, i.e. that the server was built/linked with the NUMA library.
The main function introduced is pg_numa_query_pages(), which allows
determining the NUMA node for individual memory pages. Internally the
function uses move_pages(2) syscall, as it allows batching, and is more
efficient than get_mempolicy(2).
Author: Jakub Wartak <jakub.wartak@enterprisedb.com>
Co-authored-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CAKZiRmxh6KWo0aqRqvmcoaX2jUxZYb4kGp3N%3Dq1w%2BDiH-696Xw%40mail.gmail.com
The previous implementation of CRC32C on x86 relied on the native
CRC32 instruction from the SSE 4.2 extension, which operates on
up to 8 bytes at a time. We can get a substantial speedup by using
carryless multiplication on SIMD registers, processing 64 bytes per
loop iteration. Shorter inputs fall back to ordinary CRC instructions.
On Intel Tiger Lake hardware (2020), CRC is now 50% faster for inputs
between 64 and 112 bytes, and 3x faster for 256 bytes.
The VPCLMULQDQ instruction on 512-bit registers has been available
on Intel hardware since 2019 and AMD since 2022. There is an older
variant for 128-bit registers, but at least on Zen 2 it performs worse
than normal CRC instructions for short inputs.
We must now do a runtime check, even for builds that target SSE
4.2. This doesn't matter in practice for WAL (arguably the most
critical case), because since commit e2809e3a1 the final computation
with the 20-byte WAL header is inlined and unrolled when targeting
that extension. Compared with two direct function calls, testing
showed equal or slightly faster performance in performing an indirect
function call on several dozen bytes followed by inlined instructions
on constant input of 20 bytes.
The MIT-licensed implementation was generated with the "generate"
program from
https://github.com/corsix/fast-crc32/
Based on: "Fast CRC Computation for Generic Polynomials Using PCLMULQDQ
Instruction" V. Gopal, E. Ozturk, et al., 2009
Co-authored-by: Raghuveer Devulapalli <raghuveer.devulapalli@intel.com>
Co-authored-by: Paul Amonson <paul.d.amonson@intel.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Matthew Sterrett <matthewsterrett2@gmail.com> (earlier version)
Tested-by: Raghuveer Devulapalli <raghuveer.devulapalli@intel.com>
Tested-by: David Rowley <<dgrowleyml@gmail.com>> (earlier version)
Discussion: https://postgr.es/m/BL1PR11MB530401FA7E9B1CA432CF9DC3DC192@BL1PR11MB5304.namprd11.prod.outlook.com
Discussion: https://postgr.es/m/PH8PR11MB82869FF741DFA4E9A029FF13FBF72@PH8PR11MB8286.namprd11.prod.outlook.com
This adds a new connection parameter which instructs libpq to
write out keymaterial clientside into a file in order to make
connection debugging with Wireshark and similar tools possible.
The file format used is the standardized NSS format.
Author: Abhishek Chanda <abhishek.becs@gmail.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/CAKiP-K85C8uQbzXKWf5wHQPkuygGUGcufke713iHmYWOe9q2dA@mail.gmail.com
timingsafe_bcmp() should be used instead of memcmp() or a naive
for-loop, when comparing passwords or secret tokens, to avoid leaking
information about the secret token by timing. This commit just
introduces the function but does not change any existing code to use
it yet.
Co-authored-by: Jelte Fennema-Nio <github-tech@jeltef.nl>
Discussion: https://www.postgresql.org/message-id/7b86da3b-9356-4e50-aa1b-56570825e234@iki.fi
As of 15.4, macOS has strchrnul(), but access to it is blocked behind
a check for MACOSX_DEPLOYMENT_TARGET >= 15.4. But our does-it-link
configure check finds it, so we try to use it, and fail with the
present default deployment target (namely 15.0). This accounts for
today's buildfarm failures on indri and sifaka.
This is the identical problem that we faced some years ago when Apple
introduced preadv and pwritev in the same way. We solved that in
commit f014b1b9b by using AC_CHECK_DECLS instead of AC_CHECK_FUNCS
to check the functions' availability. So do the same now for
strchrnul(). Interestingly, we already had a workaround for
"the link check doesn't agree with <string.h>" cases with glibc,
which we no longer need since only the header declaration is being
checked.
Testing this revealed that the meson version of this check has never
worked, because it failed to use "-Werror=unguarded-availability-new".
(Apparently nobody's tried to build with meson on macOS versions that
lack preadv/pwritev as standard.) Adjust that while at it. Also,
we had never put support for "-Werror=unguarded-availability-new"
into v13, but we need that now.
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/385134.1743523038@sss.pgh.pa.us
Backpatch-through: 13
This commit introduces SVE implementations of pg_popcount{32,64}.
Unlike the Neon versions, we need an additional configure-time
check to determine if the compiler supports SVE intrinsics, and we
need a runtime check to determine if the current CPU supports SVE
instructions. Our testing showed that the SVE implementations are
much faster for larger inputs and are comparable to the status
quo for smaller inputs.
Author: "Devanga.Susmitha@fujitsu.com" <Devanga.Susmitha@fujitsu.com>
Co-authored-by: "Chiranmoy.Bhattacharya@fujitsu.com" <Chiranmoy.Bhattacharya@fujitsu.com>
Co-authored-by: "Malladi, Rama" <ramamalladi@hotmail.com>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/010101936e4aaa70-b474ab9e-b9ce-474d-a3ba-a3dc223d295c-000000%40us-west-2.amazonses.com
Discussion: https://postgr.es/m/OSZPR01MB84990A9A02A3515C6E85A65B8B2A2%40OSZPR01MB8499.jpnprd01.prod.outlook.com
Remove setlocale() and _configthreadlocal() as fallback strategy on
systems that don't have uselocale(), where ECPG tries to control
LC_NUMERIC formatting on input and output of floating point numbers. It
was probably broken on some systems (NetBSD), and the code was also
quite messy and complicated, with obsolete configure tests (Windows).
It was also arguably broken, or at least had unstated environmental
requirements, if pgtypeslib code was called directly.
Instead, introduce PG_C_LOCALE to refer to the "C" locale as a locale_t
value. It maps to the special constant LC_C_LOCALE when defined by libc
(macOS, NetBSD), or otherwise uses a process-lifetime locale_t that is
allocated on first use, just as ECPG previously did itself. The new
replacement might be more widely useful. Then change the float parsing
and printing code to pass that to _l() functions where appropriate.
Unfortunately the portability of those functions is a bit complicated.
First, many obvious and useful _l() functions are missing from POSIX,
though most standard libraries define some of them anyway. Second,
although the thread-safe save/restore technique can be used to replace
the missing ones, Windows and NetBSD refused to implement standard
uselocale(). They might have a point: "wide scope" uselocale() is hard
to combine with other code and error-prone, especially in library code.
Luckily they have the _l() functions we want so far anyway. So we have
to be prepared for both ways of doing things:
1. In ECPG, use strtod_l() for parsing, and supply a port.h replacement
using uselocale() over a limited scope if missing.
2. Inside our own snprintf.c, use three different approaches to format
floats. For frontend code, call libc's snprintf_l(), or wrap libc's
snprintf() in uselocale() if it's missing. For backend code, snprintf.c
can keep assuming that the global locale's LC_NUMERIC is "C" and call
libc's snprintf() without change, for now.
(It might eventually be possible to call our in-tree Ryū routines to
display floats in snprintf.c, given the C-locale-always remit of our
in-tree snprintf(), but this patch doesn't risk changing anything that
complicated.)
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tristan Partin <tristan@partin.io>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CWZBBRR6YA8D.8EHMDRGLCKCD%40neon.tech
This involves four different implementation strategies:
1. For Windows, we now require _configthreadlocale() to be available
and work (commit f1da075d9a), and the documentation says that the
object returned by localeconv() is in thread-local memory.
2. For glibc, we translate to nl_langinfo_l() calls, because it
offers the same information that way as an extension, and that API is
thread-safe.
3. For macOS/*BSD, use localeconv_l(), which is thread-safe.
4. For everything else, use uselocale() to set the locale for the
thread, and use a big ugly lock to defend against the returned object
being concurrently clobbered. In practice this currently means only
Solaris.
The new call is used in pg_locale.c, replacing calls to setlocale() and
localeconv().
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGJqVe0%2BPv9dvC9dSums_PXxGo9SWcxYAMBguWJUGbWz-A%40mail.gmail.com
In these tests, we need to verify not only that the compiler has heard
of these intrinsics, but that lower-level tools cope with them too.
(For example, the assembler must also know the instructions, and on
some platforms there might be library support involved.) The hazard
is that the compiler might optimize away the calls altogether,
allowing the configure check to succeed only to have the build fail
later if lower-level support is missing. The existing code tried to
prevent that by ensuring that the result of the intrinsic is used
for something, but that's really insufficient because we were feeding
constant input to it. So the compiler would be perfectly entitled to
optimize away the calls anyway. Fix by making the inputs into global
variables. (Hypothetically, LTO optimization could still remove the
code --- but that's well past where we'd be likely to hit trouble.)
It is not known that any current compiler would actually optimize
away these calls, and even if that happened it would be unlikely
that any problem would manifest. Our concern for this stems from
largely-bygone days when it was common to install gcc on platforms
with some other native compiler, so that a compiler-vs-library
support discrepancy was more probable. Still, there's little
point in defending against such cases in a way that is visibly
incomplete.
I'm content to fix this in master for now; we can back-patch if
any indication appears that it's a live problem for someone.
Discussion: https://postgr.es/m/3368102.1741993462@sss.pgh.pa.us
There is concern that a blocking DNS lookup in libpq could stall a
backend process (say, via FDW). Since there's currently no strong
evidence that synchronous DNS is a popular option, disallow it entirely
rather than warning at configure time. We can revisit if anyone
complains.
Per query from Andres Freund.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/p4bd7mn6dxr2zdak74abocyltpfdxif4pxqzixqpxpetjwt34h%40qc6jgfmoddvq
Previously the portlock logic, added in 9b4eafcaf4, didn't actually work
properly when the tests were run via meson. 9b4eafcaf4 used the
MESON_BUILD_ROOT environment variable to determine the directory for the port
lock directory, but that's never set for running the tests. That meant that
each test used its own portlock dir, unless the PG_TEST_PORT_DIR environment
variable was set.
Fix the problem by setting top_builddir for the environment. That's also used
for the autoconf/make build.
Backpatch back to 16, where meson support was added.
Reported-by: Zharkov Roman <r.zharkov@postgrespro.ru>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Backpatch-through: 16
This commit implements OAUTHBEARER, RFC 7628, and OAuth 2.0 Device
Authorization Grants, RFC 8628. In order to use this there is a
new pg_hba auth method called oauth. When speaking to a OAuth-
enabled server, it looks a bit like this:
$ psql 'host=example.org oauth_issuer=... oauth_client_id=...'
Visit https://oauth.example.org/login and enter the code: FPQ2-M4BG
Device authorization is currently the only supported flow so the
OAuth issuer must support that in order for users to authenticate.
Third-party clients may however extend this and provide their own
flows. The built-in device authorization flow is currently not
supported on Windows.
In order for validation to happen server side a new framework for
plugging in OAuth validation modules is added. As validation is
implementation specific, with no default specified in the standard,
PostgreSQL does not ship with one built-in. Each pg_hba entry can
specify a specific validator or be left blank for the validator
installed as default.
This adds a requirement on libcurl for the client side support,
which is optional to build, but the server side has no additional
build requirements. In order to run the tests, Python is required
as this adds a https server written in Python. Tests are gated
behind PG_TEST_EXTRA as they open ports.
This patch has been a multi-year project with many contributors
involved with reviews and in-depth discussions: Michael Paquier,
Heikki Linnakangas, Zhihong Yu, Mahendrakar Srinivasarao, Andrey
Chudnovsky and Stephen Frost to name a few. While Jacob Champion
is the main author there have been some levels of hacking by others.
Daniel Gustafsson contributed the validation module and various bits
and pieces; Thomas Munro wrote the client side support for kqueue.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Kashif Zeeshan <kashi.zeeshan@gmail.com>
Discussion: https://postgr.es/m/d1b467a78e0e36ed85a09adf979d04cf124a9d4b.camel@vmware.com
The missing dependency was, e.g., visible when doing
ninja clean && ninja meson-test-prereq && meson test --no-rebuild --suite setup --suite libpq
This is a bit more complicated than other related fixes, because until now
libpq's tests depended on 'frontend_code', which includes a dependency on
fe_utils, which in turns on libpq. That in turn required
src/interfaces/libpq/test to be entered from the top-level, not from
libpq/meson.build. Because of that the test definitions in libpq/meson.build
could not declare a dependency on the binaries defined in
libpq/test/meson.build.
To fix this, this commit creates frontend_no_fe_utils_code, which allows us to
recurse into libpq/test from withing libpq/meson.build.
Apply this to all branches with meson support, as part of an effort to fix
incorrect test dependencies that can lead to test failures.
Discussion: https://postgr.es/m/CAGECzQSvM3iSDmjF+=Kof5an6jN8UbkP_4cKKT9w6GZavmb5yQ@mail.gmail.com
Discussion: https://postgr.es/m/bdba588f-69a9-4f3e-9b95-62d07210a32e@eisentraut.org
Backpatch: 16-, where meson support was added
The missing dependency was, e.g., visible when doing
ninja clean && ninja meson-test-prereq && meson test --no-rebuild --suite setup --suite cube
because meson (and thus its internal meson-test-prereq target) did not know
about a lot of the required targets.
Previously tmp_install did not actually depend on the relevant files being
built. That was mostly not visible, because "meson test" currently uses the
'default' targets as a test's dependency if no dependency is specified.
However, there are plans to narrow that on the meson side, to make it quicker
to run tests.
Apply this to all branches with meson support, as part of an effort to fix
incorrect test dependencies that can lead to test failures.
Discussion: https://postgr.es/m/CAGECzQSvM3iSDmjF+=Kof5an6jN8UbkP_4cKKT9w6GZavmb5yQ@mail.gmail.com
Discussion: https://postgr.es/m/bdba588f-69a9-4f3e-9b95-62d07210a32e@eisentraut.org
Backpatch: 16-, where meson support was added
Add a TAP test for sepgsql. This automates the previously required
manual setup before the test. The actual tests are still run by
pg_regress, as before, but now called from within the TAP Perl script.
The previous manual test script (test_sepgsql) is left in place, since
its purpose is (also) to test whether a running instance was properly
initialized for sepgsql. But it has been changed to call pg_regress
directly and no longer require make.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://www.postgresql.org/message-id/flat/651a5baf-5c45-4a5a-a202-0c8453a4ebf8@eisentraut.org
Remove the flex version checks from configure and meson. The cutoff
versions are all so ancient that this is no longer relevant, and what
the actual cutoff should be is a bit fuzzy.
This also removes the ancient behavior that configure would also
accept a "lex" program if it is actuall flex. This aligns the check
with meson in this respect.
For future reference, as of this commit, these are relevant flex
versions:
- The hard required minimum is flex 2.5.34 as of commit b1ef48980d,
but this has not actually been tested.
- Prior to this, the minimum enforced by configure/meson was flex
2.5.35, which is the oldest present in the buildfarm right now.
- As of commit 6fdd5d9563, the oldest version that will compile
without warnings due to flex-generated code is flex 2.5.36.
- The oldest version that probably still has some practical relevance
is flex 2.5.37, which ships with CentOS/RHEL 7.
Discussion: https://www.postgresql.org/message-id/1a204ccd-7ae6-478c-a431-407b5c48ccc6@eisentraut.org
Redefine our exact width types with standard C99 types and macros,
including int64_t, INT64_MAX, INT64_C(), PRId64 etc. We were already
using <stdint.h> types in a few places.
One complication is that Windows' <inttypes.h> uses format strings like
"%I64d", "%I32", "%I" for PRI*64, PRI*32, PTR*PTR, instead of mapping to
other standardized format strings like "%lld" etc as seen on other known
systems. Teach our snprintf.c to understand them.
This removes a lot of configure clutter, and should also allow 64-bit
numbers and other standard types to be used in localized messages
without casting.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/ME3P282MB3166F9D1F71F787929C0C7E7B6312%40ME3P282MB3166.AUSP282.PROD.OUTLOOK.COM
Apparently, if you define _POSIX_C_SOURCE on Solaris,
that's interpreted as "you get ONLY what's defined by POSIX".
Results from BF member hake show that that breaks perl.h,
and doubtless it'd cause more problems if we got past that.
Adopt the suggestion from standards(7) that we also need to
define __EXTENSIONS__, in hopes of un-breaking things.
Discussion: https://postgr.es/m/1654508.1733162761@sss.pgh.pa.us
This is an attempt to suppress some compiler warnings that appeared in
the wake of commit 7f798aca1: it seems that by default Solaris/illumos
declares shmdt() to take "char *" not "void *". We'd like the system
headers to provide modern POSIX APIs, and POSIX 2001 seems to be as
modern as is available there.
illumos' standards(7) man page suggests that we might also need to
define __EXTENSIONS__, but let's see what happens with just this.
Discussion: https://postgr.es/m/1654508.1733162761@sss.pgh.pa.us
The C standard says that sizeof(bool) is implementation-defined, but we
know of no current systems where it is not 1. The last known systems
seem to have been Apple macOS/PowerPC 10.5 and Microsoft Visual C++ 4,
both long defunct.
PostgreSQL has always required sizeof(bool) == 1 for the definition of
bool that it used, but previously it would define its own type if the
system-provided bool had a different size. That was liable to cause
memory layout problems when interacting with system and third-party
libraries on (by now hypothetical) computers with wider _Bool, and now
C23 has introduced a new problem by making bool a built-in datatype
(like C++), so the fallback code doesn't even compile. We could
probably work around that, but then we'd be writing new untested code
for a computer that doesn't exist.
Instead, delete the unreachable and C23-uncompilable fallback code, and
let existing static assertions fail if the system-provided bool is too
wide. If we ever get a problem report from a real system, then it will
be time to figure out what to do about it in a way that also works on
modern compilers.
Note on C++: Previously we avoided including <stdbool.h> or trying to
define a new bool type in headers that might be included by C++ code.
These days we might as well just include <stdbool.h> unconditionally:
it should be visible to C++11 but do nothing, just as in C23. We
already include <stdint.h> without C++ guards in c.h, and that falls
under the same C99-compatibility section of the C++11 standard as
<stdbool.h>, so let's remove the guards here too.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3198438.1731895163%40sss.pgh.pa.us
Presently, we check for compiler support for the required
intrinsics both with and without the -msse4.2 compiler flag, and
then depending on the results of those checks, we pick which files
to compile with which flags. This is tedious and complicated, and
it results in unsustainable coding patterns such as separate files
for each portion of code that may need to be built with different
compiler flags.
This commit makes use of the newly-added support for
__attribute__((target(...))) in the SSE4.2 CRC-32C code. This
simplifies both the configure-time checks and the build scripts,
and it allows us to place the functions that use the intrinsics in
files that we otherwise do not want to build with special CPU
instructions (although this commit refrains from doing so). This
is also preparatory work for a proposed follow-up commit that will
further optimize the CRC-32C code with AVX-512 instructions.
While at it, this commit modifies meson's checks for SSE4.2 CRC
support to be the same as autoconf's. meson was choosing whether
to use a runtime check based purely on whether -msse4.2 is
required, while autoconf has long checked for the __SSE4_2__
preprocessor symbol to decide. meson's previous approach seems to
work just fine, but this change avoids needing to build multiple
test programs and to keep track of whether to actually use
pg_attribute_target().
Ideally we'd use __attribute__((target(...))) for ARMv8 CRC
support, too, but there's little point in doing so because until
clang 16, using the ARM intrinsics still requires special compiler
flags. Perhaps we can re-evaluate this decision after some time
has passed.
Author: Raghuveer Devulapalli
Discussion: https://postgr.es/m/PH8PR11MB8286BE735A463468415D46B5FB5C2%40PH8PR11MB8286.namprd11.prod.outlook.com
All modern Windows systems have _configthreadlocale(). It was first
introduced in msvcr80.dll from Visual Studio 2005. Historically, MinGW
was stuck on even older msvcrt.dll, but added its own dummy
implementation of the function when using msvcrt.dll years ago anyway,
effectively rendering the configure test useless. In practice we don't
encounter the dummy anymore because modern MinGW uses ucrt.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CWZBBRR6YA8D.8EHMDRGLCKCD%40neon.tech
Commit bc5a4dfc accidentally left a check for <stdbool.h> in
meson.build's header_checks. Synchronize with configure, which no
longer defines HAVE_STDBOOL_H.
There is still a reference to <stdbool.h> in an earlier test to see if
we need -std=c99 to get C99 features, like autoconf 2.69's
AC_PROG_CC_C99. (Therefore the test remove by this commit was
tautological since day one: you'd have copped "C compiler does not
support C99" before making it this far.)
Back-patch to 16, where meson begins.
Michael Paquier