Replace the fixed-size array of fast-path locks with arrays, sized on
startup based on max_locks_per_transaction. This allows using fast-path
locking for workloads that need more locks.
The fast-path locking introduced in 9.2 allowed each backend to acquire
a small number (16) of weak relation locks cheaply. If a backend needs
to hold more locks, it has to insert them into the shared lock table.
This is considerably more expensive, and may be subject to contention
(especially on many-core systems).
The limit of 16 fast-path locks was always rather low, because we have
to lock all relations - not just tables, but also indexes, views, etc.
For planning we need to lock all relations that might be used in the
plan, not just those that actually get used in the final plan. So even
with rather simple queries and schemas, we often need significantly more
than 16 locks.
As partitioning gets used more widely, and the number of partitions
increases, this limit is trivial to hit. Complex queries may easily use
hundreds or even thousands of locks. For workloads doing a lot of I/O
this is not noticeable, but for workloads accessing only data in RAM,
the access to the shared lock table may be a serious issue.
This commit removes the hard-coded limit of the number of fast-path
locks. Instead, the size of the fast-path arrays is calculated at
startup, and can be set much higher than the original 16-lock limit.
The overall fast-path locking protocol remains unchanged.
The variable-sized fast-path arrays can no longer be part of PGPROC, but
are allocated as a separate chunk of shared memory and then references
from the PGPROC entries.
The fast-path slots are organized as a 16-way set associative cache. You
can imagine it as a hash table of 16-slot "groups". Each relation is
mapped to exactly one group using hash(relid), and the group is then
processed using linear search, just like the original fast-path cache.
With only 16 entries this is cheap, with good locality.
Treating this as a simple hash table with open addressing would not be
efficient, especially once the hash table gets almost full. The usual
remedy is to grow the table, but we can't do that here easily. The
access would also be more random, with worse locality.
The fast-path arrays are sized using the max_locks_per_transaction GUC.
We try to have enough capacity for the number of locks specified in the
GUC, using the traditional 2^n formula, with an upper limit of 1024 lock
groups (i.e. 16k locks). The default value of max_locks_per_transaction
is 64, which means those instances will have 64 fast-path slots.
The main purpose of the max_locks_per_transaction GUC is to size the
shared lock table. It is often set to the "average" number of locks
needed by backends, with some backends using significantly more locks.
This should not be a major issue, however. Some backens may have to
insert locks into the shared lock table, but there can't be too many of
them, limiting the contention.
The only solution is to increase the GUC, even if the shared lock table
already has sufficient capacity. That is not free, especially in terms
of memory usage (the shared lock table entries are fairly large). It
should only happen on machines with plenty of memory, though.
In the future we may consider a separate GUC for the number of fast-path
slots, but let's try without one first.
Reviewed-by: Robert Haas, Jakub Wartak
Discussion: https://postgr.es/m/510b887e-c0ce-4a0c-a17a-2c6abb8d9a5c@enterprisedb.com
To make them follow the usual naming convention where
FoobarShmemSize() calculates the amount of shared memory needed by
Foobar subsystem, and FoobarShmemInit() performs the initialization.
I didn't rename CreateLWLocks() and InitShmmeIndex(), because they are
a little special. They need to be called before any of the other
ShmemInit() functions, because they set up the shared memory
bookkeeping itself. I also didn't rename InitProcGlobal(), because
unlike other Shmeminit functions, it's not called by individual
backends.
Reviewed-by: Andreas Karlsson
Discussion: https://www.postgresql.org/message-id/c09694ff-2453-47e5-b26c-32a16cd75ce6@iki.fi
Split the shared and local initialization to separate functions, and
follow the common naming conventions. With this, we no longer create
the LockMethodLocalHash hash table in the postmaster process, which
was always pointless.
Reviewed-by: Andreas Karlsson
Discussion: https://www.postgresql.org/message-id/c09694ff-2453-47e5-b26c-32a16cd75ce6@iki.fi
Move responsibility of generating the cancel key to the backend
process. The cancel key is now generated after forking, and the
backend advertises it in the ProcSignal array. When a cancel request
arrives, the backend handling it scans the ProcSignal array to find
the target pid and cancel key. This is similar to how this previously
worked in the EXEC_BACKEND case with the ShmemBackendArray, just
reusing the ProcSignal array.
One notable change is that we no longer generate cancellation keys for
non-backend processes. We generated them before just to prevent a
malicious user from canceling them; the keys for non-backend processes
were never actually given to anyone. There is now an explicit flag
indicating whether a process has a valid key or not.
I wrote this originally in preparation for supporting longer cancel
keys, but it's a nice cleanup on its own.
Reviewed-by: Jelte Fennema-Nio
Discussion: https://www.postgresql.org/message-id/508d0505-8b7a-4864-a681-e7e5edfe32aa@iki.fi
Each of max_connections, max_worker_processes,
autovacuum_max_workers, and max_wal_senders has a GUC check hook
that verifies the sum of those GUCs does not exceed a hard-coded
limit (see the comment for MAX_BACKENDS in postmaster.h). In
general, the hooks effectively guard against egregious
misconfigurations.
However, this approach has some problems. Since these check hooks
are called as each GUC is assigned its user-specified value, only
one of the hooks will be called with all the relevant GUCs set. If
one or more of the user-specified values are less than the initial
values of the GUCs' underlying variables, false positives can
occur.
Furthermore, the error message emitted when one of the check hooks
fails is not tremendously helpful. For example, the command
$ pg_ctl -D . start -o "-c max_connections=262100 -c max_wal_senders=10000"
fails with the following error:
FATAL: invalid value for parameter "max_wal_senders": 10000
Fortunately, there is an extra copy of this check in
InitializeMaxBackends() that we can rely on, so this commit removes
the aforementioned GUC check hooks in favor of that one. It also
enhances the error message to clearly show the values of the
relevant GUCs and the hard-coded limit their sum may not exceed.
The downside of this change is that server startup progresses
further before failing due to such misconfigurations (thus taking
longer), but these failures are expected to be rare, so we don't
anticipate any real harm in practice.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZnMr2k-Nk5vj7T7H%40nathan
New provider for collations, like "libc" or "icu", but without any
external dependency.
Initially, the only locale supported by the builtin provider is "C",
which is identical to the libc provider's "C" locale. The libc
provider's "C" locale has always been treated as a special case that
uses an internal implementation, without using libc at all -- so the
new builtin provider uses the same implementation.
The builtin provider's locale is independent of the server environment
variables LC_COLLATE and LC_CTYPE. Using the builtin provider, the
database collation locale can be "C" while LC_COLLATE and LC_CTYPE are
set to "en_US", which is impossible with the libc provider.
By offering a new builtin provider, it clarifies that the semantics of
a collation using this provider will never depend on libc, and makes
it easier to document the behavior.
Discussion: https://postgr.es/m/ab925f69-5f9d-f85e-b87c-bd2a44798659@joeconway.com
Discussion: https://postgr.es/m/dd9261f4-7a98-4565-93ec-336c1c110d90@manitou-mail.org
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Daniel Vérité, Peter Eisentraut, Jeremy Schneider
Rename pg_collation.colliculocale to colllocale, and
pg_database.daticulocale to datlocale. These names reflects that the
fields will be useful for the upcoming builtin provider as well, not
just for ICU.
This is purely a rename; no changes to the meaning of the fields.
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Peter Eisentraut
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
Remove IsBackgroundWorker, IsAutoVacuumLauncherProcess(),
IsAutoVacuumWorkerProcess(), and IsLogicalSlotSyncWorker() in favor of
new Am*Process() macros that use MyBackendType. For consistency with
the existing Am*Process() macros.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/f3ecd4cb-85ee-4e54-8278-5fabfb3a4ed0@iki.fi
Previously, backend ID was an index into the ProcState array, in the
shared cache invalidation manager (sinvaladt.c). The entry in the
ProcState array was reserved at backend startup by scanning the array
for a free entry, and that was also when the backend got its backend
ID. Things become slightly simpler if we redefine backend ID to be the
index into the PGPROC array, and directly use it also as an index to
the ProcState array. This uses a little more memory, as we reserve a
few extra slots in the ProcState array for aux processes that don't
need them, but the simplicity is worth it.
Aux processes now also have a backend ID. This simplifies the
reservation of BackendStatusArray and ProcSignal slots.
You can now convert a backend ID into an index into the PGPROC array
simply by subtracting 1. We still use 0-based "pgprocnos" in various
places, for indexes into the PGPROC array, but the only difference now
is that backend IDs start at 1 while pgprocnos start at 0. (The next
commmit will get rid of the term "backend ID" altogether and make
everything 0-based.)
There is still a 'backendId' field in PGPROC, now part of 'vxid' which
encapsulates the backend ID and local transaction ID together. It's
needed for prepared xacts. For regular backends, the backendId is
always equal to pgprocno + 1, but for prepared xact PGPROC entries,
it's the ID of the original backend that processed the transaction.
Reviewed-by: Andres Freund, Reid Thompson
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
By enabling slot synchronization, all the failover logical replication
slots on the primary (assuming configurations are appropriate) are
automatically created on the physical standbys and are synced
periodically. The slot sync worker on the standby server pings the primary
server at regular intervals to get the necessary failover logical slots
information and create/update the slots locally. The slots that no longer
require synchronization are automatically dropped by the worker.
The nap time of the worker is tuned according to the activity on the
primary. The slot sync worker waits for some time before the next
synchronization, with the duration varying based on whether any slots were
updated during the last cycle.
A new parameter sync_replication_slots enables or disables this new
process.
On promotion, the slot sync worker is shut down by the startup process to
drop any temporary slots acquired by the slot sync worker and to prevent
the worker from trying to fetch the failover slots.
A functionality to allow logical walsenders to wait for the physical will
be done in a subsequent commit.
Author: Shveta Malik, Hou Zhijie based on design inputs by Masahiko Sawada and Amit Kapila
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Ajin Cherian, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
This commit adds timeout that is expected to be used as a prevention
of long-running queries. Any session within the transaction will be
terminated after spanning longer than this timeout.
However, this timeout is not applied to prepared transactions.
Only transactions with user connections are affected.
Discussion: https://postgr.es/m/CAAhFRxiQsRs2Eq5kCo9nXE3HTugsAAJdSQSmxncivebAxdmBjQ%40mail.gmail.com
Author: Andrey Borodin <amborodin@acm.org>
Author: Japin Li <japinli@hotmail.com>
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Nikolay Samokhvalov <samokhvalov@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: bt23nguyent <bt23nguyent@oss.nttdata.com>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
This commit introduces trigger on login event, allowing to fire some actions
right on the user connection. This can be useful for logging or connection
check purposes as well as for some personalization of environment. Usage
details are described in the documentation included, but shortly usage is
the same as for other triggers: create function returning event_trigger and
then create event trigger on login event.
In order to prevent the connection time overhead when there are no triggers
the commit introduces pg_database.dathasloginevt flag, which indicates database
has active login triggers. This flag is set by CREATE/ALTER EVENT TRIGGER
command, and unset at connection time when no active triggers found.
Author: Konstantin Knizhnik, Mikhail Gribkov
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709%40postgrespro.ru
Reviewed-by: Pavel Stehule, Takayuki Tsunakawa, Greg Nancarrow, Ivan Panchenko
Reviewed-by: Daniel Gustafsson, Teodor Sigaev, Robert Haas, Andres Freund
Reviewed-by: Tom Lane, Andrey Sokolov, Zhihong Yu, Sergey Shinderuk
Reviewed-by: Gregory Stark, Nikita Malakhov, Ted Yu
This adds a new option called BGWORKER_BYPASS_ROLELOGINCHECK to the
flags available to BackgroundWorkerInitializeConnection() and
BackgroundWorkerInitializeConnectionByOid().
This gives the possibility to bgworkers to bypass the role login check,
making possible the use of a role that has no login rights while not
being a superuser. PostgresInit() gains a new flag called
INIT_PG_OVERRIDE_ROLE_LOGIN, taking advantage of the refactoring done in
4800a5dfb4.
Regression tests are added to worker_spi to check the behavior of this
new option with bgworkers.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/bcc36259-7850-4882-97ef-d6b905d2fc51@gmail.com
InitPostgres() has been using a set of boolean arguments to control its
behavior, and a patch under discussion was aiming at expanding it with a
third one. In preparation for expanding this area, this commit switches
all the current boolean arguments of this routine to a single bits32
argument instead. Two values are currently supported for the flags:
- INIT_PG_LOAD_SESSION_LIBS to load [session|local]_preload_libraries at
startup.
- INIT_PG_OVERRIDE_ALLOW_CONNS to allow connection to a database even if
it has !datallowconn. This is used by bgworkers.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/ZSTn66_BXRZCeaqS@paquier.xyz
Dropping a database while a connection is attempted on it was able to
lead to the presence of valid database entries in shared statistics.
The issue is that MyDatabaseId was getting set too early than it should,
as, if the connection attempted on the dropped database fails when
renamed or dropped, the shutdown callback of the shared statistics would
finish by re-inserting a correct entry related to the database already
dropped.
As analyzed by the bug reporters, this issue could lead to phantom
entries in the database list maintained by the autovacuum launcher
(in rebuild_database_list()) if the database dropped was part of the
database list when it was still valid. After the database was dropped,
it would remain the highest on the list of databases to considered by
the autovacuum worker as things to process. This would prevent
autovacuum jobs to happen on all the other databases still present.
The commit fixes this issue by delaying setting MyDatabaseId until the
database existence has been re-checked with the second scan on
pg_database after getting a shared lock on it, and by switching
pgstat_update_dbstats() so as nothing happens if MyDatabaseId is not
valid.
Issue introduced by 5891c7a8ed, so backpatch down to 15.
Reported-by: Will Mortensen, Jacob Speidel
Analyzed-by: Will Mortensen, Jacob Speidel
Author: Andres Freund
Discussion: https://postgr.es/m/17973-bca1f7d5c14f601e@postgresql.org
Backpatch-through: 15
Until now, when DROP DATABASE got interrupted in the wrong moment, the removal
of the pg_database row would also roll back, even though some irreversible
steps have already been taken. E.g. DropDatabaseBuffers() might have thrown
out dirty buffers, or files could have been unlinked. But we continued to
allow connections to such a corrupted database.
To fix this, mark databases invalid with an in-place update, just before
starting to perform irreversible steps. As we can't add a new column in the
back branches, we use pg_database.datconnlimit = -2 for this purpose.
An invalid database cannot be connected to anymore, but can still be
dropped.
Unfortunately we can't easily add output to psql's \l to indicate that some
database is invalid, it doesn't fit in any of the existing columns.
Add tests verifying that a interrupted DROP DATABASE is handled correctly in
the backend and in various tools.
Reported-by: Evgeny Morozov <postgresql3@realityexists.net>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20230509004637.cgvmfwrbht7xm7p6@awork3.anarazel.de
Discussion: https://postgr.es/m/20230314174521.74jl6ffqsee5mtug@awork3.anarazel.de
Backpatch: 11-, bug present in all supported versions
The GUC settings lc_collate and lc_ctype are from a time when those
locale settings were cluster-global. When those locale settings were
made per-database (PG 8.4), the settings were kept as read-only. As
of PG 15, you can use ICU as the per-database locale provider, so
examining these settings is already less meaningful and possibly
confusing, since you need to look into pg_database to find out what is
really happening, and they would likely become fully obsolete in the
future anyway.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://www.postgresql.org/message-id/696054d1-bc88-b6ab-129a-18b8bce6a6f0@enterprisedb.com
Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Old versions of Solaris and illumos had buffer overrun bugs in their
strxfrm() implementations. The bugs were fixed more than a decade ago
and the relevant releases are long out of vendor support. It's time to
remove the defense added by commit be8b06c3.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA+hUKGJ-ZPJwKHVLbqye92-ZXeLoCHu5wJL6L6HhNP7FkJ=meA@mail.gmail.com
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
When extracting an attr from a cached tuple in the syscache with
SysCacheGetAttr the isnull parameter must be checked in case the
attr cannot be NULL. For cases when this is known beforehand, a
wrapper is introduced which perform the errorhandling internally
on behalf of the caller, invoking an elog in case of a NULL attr.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/AD76405E-DB45-46B6-941F-17B1EB3A9076@yesql.se
Check whether the datctype is C to determine whether t_isspace() and
related functions use isspace() or iswspace().
Previously, t_isspace() checked whether the database default collation
was C; which is incorrect when the default collation uses the ICU
provider.
Discussion: https://postgr.es/m/79e4354d9eccfdb00483146a6b9f6295202e7890.camel@j-davis.com
Reviewed-by: Peter Eisentraut
Backpatch-through: 15
Mainly move some detail from errmsg to errdetail, remove explicit
mention of superuser where appropriate, since that is implied in most
permission checks, and make messages more uniform.
Author: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/20230316234701.GA903298@nathanxps13
This exposes the ICU facility to add custom collation rules to a
standard collation.
New options are added to CREATE COLLATION, CREATE DATABASE, createdb,
and initdb to set the rules.
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Discussion: https://www.postgresql.org/message-id/flat/821c71a4-6ef0-d366-9acf-bb8e367f739f@enterprisedb.com
This provides a way to reserve connection slots for non-superusers.
The slots reserved via the new GUC are available only to users who
have the new predefined role pg_use_reserved_connections.
superuser_reserved_connections remains as a final reserve in case
reserved_connections has been exhausted.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
This is in preparation for adding a new reserved_connections GUC,
but aligning the GUC name with the variable name is also a good
idea on general principle.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
Commit ea92368cd1 made max_wal_senders
a separate pool of backends from max_connections, but the documentation
and error message for superuser_reserved_connections weren't updated
at the time, and as a result are somewhat misleading. Update.
This is arguably a back-patchable bug fix, but because it seems quite
minor, no back-patch.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
Instead of dozens of mostly-duplicate pg_foo_aclcheck() functions,
write one common function object_aclcheck() that can handle almost all
of them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
There are a few pg_foo_aclcheck() that don't work via the generic
function and have special APIs, so those stay as is.
I also changed most pg_foo_aclmask() functions to static functions,
since they are not used outside of aclchk.c.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
SYSTEM_USER is a reserved keyword of the SQL specification that,
roughly described, is aimed at reporting some information about the
system user who has connected to the database server. It may include
implementation-specific information about the means by the user
connected, like an authentication method.
This commit implements SYSTEM_USER as of auth_method:identity, where
"auth_method" is a keyword about the authentication method used to log
into the server (like peer, md5, scram-sha-256, gss, etc.) and
"identity" is the authentication identity as introduced by 9afffcb (peer
sets authn to the OS user name, gss to the user principal, etc.). This
format has been suggested by Tom Lane.
Note that thanks to d951052, SYSTEM_USER is available to parallel
workers.
Bump catalog version.
Author: Bertrand Drouvot
Reviewed-by: Jacob Champion, Joe Conway, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/7e692b8c-0b11-45db-1cad-3afc5b57409f@amazon.com
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
This is particularly useful when log_min_messages is set to FATAL, so as
one can know which file was not getting loaded whether hba_file or
ident_file are set to some non-default values. If using the default
values of these GUC parameters, the same reports are generated.
This commit changes the load (startup) and reload (SIGHUP) messages.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
Previously we did this after InitPostgres, at a somewhat randomly chosen
place within PostgresMain. However, since commit a0ffa885e doing this
outside a transaction can cause a crash, if we need to check permissions
while replacing a placeholder GUC. (Besides which, a preloaded library
could itself want to do database access within _PG_init.)
To avoid needing an additional transaction start/end in every session,
move the process_session_preload_libraries call to within InitPostgres's
transaction. That requires teaching the code not to call it when
InitPostgres is called from somewhere other than PostgresMain, since
we don't want session_preload_libraries to affect background workers.
The most future-proof solution here seems to be to add an additional
flag parameter to InitPostgres; fortunately, we're not yet very worried
about API stability for v15.
Doing this also exposed the fact that we're currently honoring
session_preload_libraries in walsenders, even those not connected to
any database. This seems, at minimum, a POLA violation: walsenders
are not interactive sessions. Let's stop doing that.
(All these comments also apply to local_preload_libraries, of course.)
Per report from Gurjeet Singh (thanks also to Nathan Bossart and Kyotaro
Horiguchi for review). Backpatch to v15 where a0ffa885e came in.
Discussion: https://postgr.es/m/CABwTF4VEpwTHhRQ+q5MiC5ucngN-whN-PdcKeufX7eLSoAfbZA@mail.gmail.com
This reverts most of 91c0570a79, f28bf667f6, fe0972ee5e, afdeff1052. The
only thing left is the retry loop in 019_replslot_limit.pl that avoids
spurious failures by retrying a couple times.
We haven't seen any hard evidence that this is caused by anything but slow
process shutdown. We did not find any cases where walsenders did not vanish
after waiting for longer. Therefore there's no reason for this debugging code
to remain.
Discussion: https://postgr.es/m/20220530190155.47wr3x2prdwyciah@alap3.anarazel.de
Backpatch: 15-
The original advice for hard-wired SetConfigOption calls was to use
PGC_S_OVERRIDE, particularly for PGC_INTERNAL GUCs. However,
that's really overkill for PGC_INTERNAL GUCs, since there is no
possibility that we need to override a user-provided setting.
Instead use PGC_S_DYNAMIC_DEFAULT in most places, so that the
value will appear with source = 'default' in pg_settings and thereby
not be shown by psql's new \dconfig command. The one exception is
that when changing in_hot_standby in a hot-standby session, we still
use PGC_S_OVERRIDE, because people felt that seeing that in \dconfig
would be a good thing.
Similarly use PGC_S_DYNAMIC_DEFAULT for the auto-tune value of
wal_buffers (if possible, that is if wal_buffers wasn't explicitly
set to -1), and for the typical 2MB value of max_stack_depth.
In combination these changes remove four not-very-interesting
entries from the typical output of \dconfig, all of which people
fingered as "why is that showing up?" in the discussion thread.
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
Since 6bc8ef0b7f, the maximum number
of backends can't change as background workers are registered, but
these comments still reflect the way things worked prior to that.
Also, per recent discussion, some modules call SetConfigOption()
from _PG_init(). It's not entirely clear to me whether we want to
regard that as a fully supported operation, but since we know it's
a thing that happens, it at least deserves a mention in the comments,
so add that.
Nathan Bossart, reviewed by Anton A. Melnikov
Discussion: http://postgr.es/m/20220419154658.GA2487941@nathanxps13
Several places didn't do it, and in many cases it didn't matter because
it would be a small allocation in a short-lived context; but other
places may accumulate a few (for example, in CreateDatabaseUsingFileCopy,
one per tablespace). In most databases this is highly unlikely to be
very serious either, but it seems better to make the code consistent in
case there's future copy-and-paste.
The only case of actual concern seems to be the aforementioned routine,
which is new with commit 9c08aea6a3, so there's no need to backpatch.
As pointed out by Coverity.
Commit aa0105141 assigned fixed OIDs to template0 and postgres
in a very ad-hoc way. Notably, instead of teaching Catalog.pm
about these OIDs, the unused_oids script was just hacked to
not show them as unused. That's problematic since, for example,
duplicate_oids wouldn't report any future conflict. Hence,
invent a macro DECLARE_OID_DEFINING_MACRO() that can be used to
define an OID that is known to Catalog.pm and will participate
in duplicate-detection as well as renumbering by renumber_oids.pl.
(We don't anticipate renumbering these particular OIDs, but we
might as well build out all the Catalog.pm infrastructure while
we're here.)
Another issue is that aa0105141 neglected to touch IsPinnedObject,
with the result that it now claimed template0 and postgres are
pinned. The right thing to do there seems to be to teach it that
no database is pinned, since in fact DROP DATABASE doesn't check
for pinned-ness (and at least for these cases, that is an
intentional choice). It's not clear whether this wrong answer
had any visible effect, but perhaps it could have resulted in
erroneous management of dependency entries.
In passing, rename the TemplateDbOid macro to Template1DbOid
to reduce confusion (likely we should have done that way back
when we invented template0, but we didn't), and rename the
OID macros for template0 and postgres to have a similar style.
There are no changes to postgres.bki here, so no need for a
catversion bump.
Discussion: https://postgr.es/m/2935358.1650479692@sss.pgh.pa.us
This reverts commits 0147fc7, 4567596, aa64f23, and 5ecd018.
There is no longer agreement that introducing this function
was the right way to address the problem. The consensus now
seems to favor trying to make a correct value for MaxBackends
available to mdules executing their _PG_init() functions.
Nathan Bossart
Discussion: http://postgr.es/m/20220323045229.i23skfscdbvrsuxa@jrouhaud
Tomas Vondra