Commit bba2fbc623 introduced a new implementation of the \conninfo
command in psql. That new code uses the term "TLS" while the rest of
PostgreSQL, including the rest of psql, consistently uses "SSL". This
is uselessly confusing. This changes the new code to use "SSL" as
well.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/f4ff9294-b491-4053-83f5-11c10ab8c999@eisentraut.org
In the \conninfo psql command, the "Client User" column shows the user who
established the connection, while the "Superuser" column reflects whether
the current user in the current execution context is a superuser. This means
the users referred to in these columns can differ, for example, if the current
user was changed with the SET ROLE command.
This commit adds a note to the \conninfo documentation to clarify
this behavior and avoid potential confusion.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/685961b8-b6ce-40bb-b2d5-c2ff135d3388@oss.nttdata.com
Reword the documentation around the default value to make interaction
between WATCH_INTERVAL and the \watch command clearer. While there,
also remove a stray parenthesis left over from a previous version of
the patch.
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/c34a650b-6f8b-4da7-9ebb-b6df03ce009d@eisentraut.org
Running COPY within a pipeline can break protocol synchronization in
multiple ways. psql is limited in terms of result processing if mixing
COPY commands with normal queries while controlling a pipeline with the
new meta-commands, as an effect of the following reasons:
- In COPY mode, the backend ignores additional Sync messages and will
not send a matching ReadyForQuery expected by the frontend. Doing a
\syncpipeline just after COPY will leave the frontend waiting for a
ReadyForQuery message that won't be sent, leaving psql out-of-sync.
- libpq automatically sends a Sync with the Copy message which is not
tracked in the command queue, creating an unexpected synchronisation
point that psql cannot really know about. While it is possible to track
such activity for a \copy, this cannot really be done sanely with plain
COPY queries. Backend failures during a COPY would leave the pipeline
in an aborted state while the backend would be in a clean state, ready
to process commands.
At the end, fixing those issues would require modifications in how libpq
handles pipeline and COPY. So, rather than implementing workarounds in
psql to shortcut the libpq internals (with command queue handling for
one), and because meta-commands for pipelines in psql are a new feature
with COPY in a pipeline having a limited impact compared to other
queries, this commit forbids the use of COPY within a pipeline to avoid
possible break of protocol synchronisation within psql. If there is a
use-case for COPY support within pipelines in libpq, this could always
be added in the future, if necessary.
Most of the changes of this commit impacts the tests for psql pipelines,
removing the tests related to COPY. Some TAP tests still exist for COPY
TO/FROM and \copy to/from, to check that that connections are aborted
when this operation is attempted.
Reported-by: Nikita Kalinin <n.kalinin@postgrespro.ru>
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Discussion: https://postgr.es/m/AC468509-06E8-4E2A-A4B1-63046A4AC6AB@postgrespro.ru
Commit bde2fb797a added the --with-schema, --with-data, and --with-statistics
options to pg_restore. These options control whether to restore schema, data,
or statistics if present in the archive. However, the help message and
documentation incorrectly described them as affecting what gets dumped.
This commit corrects those descriptions to clarify that the options control
restoration, not dumping.
Bug: #18952
Reported-by: TAKATSUKA Haruka <harukat@sraoss.co.jp>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: TAKATSUKA Haruka <harukat@sraoss.co.jp>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/18952-be40a620f8b1e755@postgresql.org
Database object statistics manipulation functions were introduced
in PostgreSQL 18 and are permitted under the MAINTAIN privilege.
However, the documentation previously did not mention these functions
in the list of allowed operations.
This commit updates the MAINTAIN privilege documentation to
explicitly include statistics manipulation functions, clarifying
what the privilege covers.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Discussion: https://postgr.es/m/7c7e1ad5-fdf9-486f-bc63-40ac99b0461d@oss.nttdata.com
We concluded that commit e5a3c9d9b is a feature rather than a fix; since
it was added after feature freeze, revert it.
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reported-by: Michael Paquier <michael@paquier.xyz>
Reported-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/ed2296f1-1a6b-4932-b870-5bb18c2591ae%40oss.nttdata.com
The documentation for the pg_authid system catalog and the
pg_shadow system view indicates that passwords might be stored in
cleartext, but that hasn't been possible for some time.
Oversight in commit eb61136dc7.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aD2yKkZro4nbl5ol%40nathan
Backpatch-through: 13
This commit renames the GUC log_lock_failure to log_lock_failures
to align with the existing similar setting log_lock_waits, which uses
the plural form. This improves naming consistency across related GUCs.
Suggested-by: Peter Eisentraut <peter@eisentraut.org>
Author: Fujii Masao <masao.fujii@gmail.com
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/7a8198b6-d5b8-4910-b41e-8d3efcbb015d@eisentraut.org
Commit 7406ab623f added a gist support function that we internally
refer to by the symbol GIST_STRATNUM_PROC. This translated from
"well-known" strategy numbers to opfamily-specific strategy numbers.
However, we later (commit 630f9a43ce) changed this to fit into
index-AM-level compare type mapping, so this function actually now
maps from compare type to opfamily-specific strategy numbers. So this
name is no longer fitting.
Moreover, the index AM level also supports the opposite, a function to
map from strategy number to compare type. This is currently not
supported in gist, but one might wonder what this function is supposed
to be called when it is added.
This patch changes the naming of the gist-level functionality to be
more in line with the index-AM-level functionality. This makes sense
because these are essentially the same thing on different levels.
This also changes the names of the externally visible functions that
are provided for use as such a support function.
Reviewed-by: Paul A Jungwirth <pj@illuminatedcomputing.com>
Discussion: https://www.postgresql.org/message-id/37ebb1d9-9036-485f-a215-e55435689917%40eisentraut.org
Previously, postgres_fdw always 1) opened a remote transaction in READ
WRITE mode even when the local transaction was READ ONLY, causing a READ
ONLY transaction using it that references a foreign table mapped to a
remote view executing a volatile function to write in the remote side,
and 2) opened the remote transaction in NOT DEFERRABLE mode even when
the local transaction was DEFERRABLE, causing a SERIALIZABLE READ ONLY
DEFERRABLE transaction using it to abort due to a serialization failure
in the remote side.
To avoid these, modify postgres_fdw to open a remote transaction in the
same access/deferrable modes as the local transaction. This commit also
modifies it to open a remote subtransaction in the same access mode as
the local subtransaction.
Although these issues exist since the introduction of postgres_fdw,
there have been no reports from the field. So it seems fine to just fix
them in master only.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAPmGK16n_hcUUWuOdmeUS%2Bw4Q6dZvTEDHb%3DOP%3D5JBzo-M3QmpQ%40mail.gmail.com
Set the default behavior of pg_dump and pg_dumpall to be
--no-statistics.
Leave the default for pg_restore and pg_upgrade to be
--with-statistics.
Discussion: https://postgr.es/m/CA+TgmoZ9=RnWcCOZiKYYjZs_AW1P4QXCw--h4dOLLHuf1Omung@mail.gmail.com
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
To improve the usability of logical replication examples, we need to
enable bulk copy-pasting of DML/DDL series.
Currently, output command tags and prompts disrupt this workflow. While
prompts are typically removed, converting them to comments is acceptable
here, given the multi-server context.
Additionally, ensure all examples containing operators like < and > are
wrapped in CDATA blocks to guarantee correct rendering and consistency
with other places.
Author: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAKFQuwbhbL1uaDTuo9shmo1rA-fX6XGotR7qZQ7rd-ia5ZDoQA@mail.gmail.com
The documentation for exported snapshots in logical decoding previously
stated that snapshot creation may fail on a hot standby. This is no longer
accurate, as snapshot exporting on standbys has been supported since
PostgreSQL 10. This commit removes the outdated description.
Additionally, the docs referred to the NOEXPORT_SNAPSHOT option to
suppress snapshot exporting in CREATE_REPLICATION_SLOT. However,
since PostgreSQL 15, NOEXPORT_SNAPSHOT is considered legacy syntax
and retained only for backward compatibility. This commit updates
the documentation for v15 and later to use the modern equivalent:
SNAPSHOT 'nothing'. The older syntax is preserved in documentation for
v14 and earlier.
Back-patched to all supported branches.
Reported-by: Kevin K Biju <kevinkbiju@gmail.com>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Kevin K Biju <kevinkbiju@gmail.com>
Discussion: https://postgr.es/m/174791480466.798.17122832105389395178@wrigleys.postgresql.org
Backpatch-through: 13
9219093cab modularized log_connections output to allow more
granular control over which aspects of connection establishment are
logged. It converted the boolean log_connections GUC into a list of strings
and deprecated previously supported boolean-like values on, off, true,
false, 1, 0, yes, and no. Those values still work, but they are
supported mainly for backwards compatability. As such, documented
examples of log_connections should not use these deprecated values.
Update references in the docs to deprecated log_connections values. Many
of the tests use log_connections. This commit also updates the tests to
use the new values of log_connections. In some of the tests, the updated
log_connections value covers a narrower set of aspects (e.g. the
'authentication' aspect in the tests in src/test/authentication and the
'receipt' aspect in src/test/postmaster). In other cases, the new value
for log_connections is a superset of the previous included aspects (e.g.
'all' in src/test/kerberos/t/001_auth.pl).
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/e1586594-3b69-4aea-87ce-73a7488cdc97%40eisentraut.org
As pointed out by Tom Lane, the patch introduced fragile and invasive
design around plan invalidation handling when locking of prunable
partitions was deferred from plancache.c to the executor. In
particular, it violated assumptions about CachedPlan immutability and
altered executor APIs in ways that are difficult to justify given the
added complexity and overhead.
This also removes the firstResultRels field added to PlannedStmt in
commit 28317de72, which was intended to support deferred locking of
certain ModifyTable result relations.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/605328.1747710381@sss.pgh.pa.us
Commit db6a4a985b categorized md5_password_warnings as an
authentication setting, and the placement in postgresql.conf.sample
matches that, but in the documentation it ended up under logging
settings, which isn't unreasonable but inconsistent. This moves the
documentation chunk to authentication settings as well.
Invalid indexes are suffixed with "_ccnew" or "_ccold". The
documentation missed to mention the initial underscore.
ChooseRelationName() may also append an extra number if indexes with a
similar name already exist; let's add a note about that too.
Author: Alec Cozens <acozens@pixelpower.com>
Discussion: https://postgr.es/m/174733277404.1455388.11471370288789479593@wrigleys.postgresql.org
Backpatch-through: 13
This aligns the copyright and legal notice wordig with commit
a233a603ba and pgweb commit 2d764dbc083ab8. Backpatch down
to all supported versions.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Dave Page <dpage@pgadmin.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/744E414E-3F52-404C-97FB-ED9B3AA37DC8@yesql.se
Backpatch-through: 13
The macros INJECTION_POINT() and INJECTION_POINT_CACHED() are extended
with an optional argument that can be passed down to the callback
attached when an injection point is run, giving to callbacks the
possibility to manipulate a stack state given by the caller. The
existing callbacks in modules injection_points and test_aio have their
declarations adjusted based on that.
da7226993f (core AIO infrastructure) and 93bc3d75d8 (test_aio) and
been relying on a set of workarounds where a static variable called
pgaio_inj_cur_handle is used as runtime argument in the injection point
callbacks used by the AIO tests, in combination with a TRY/CATCH block
to reset the argument value. The infrastructure introduced in this
commit will be reused for the AIO tests, simplifying them.
Reviewed-by: Greg Burd <greg@burd.me>
Discussion: https://postgr.es/m/Z_y9TtnXubvYAApS@paquier.xyz
The title for AT TIME ZONE and AT LOCAL was accidentally wrapping the
"and" in the <literal> tag. Backpatch to v17 where it was introduced
in 97957fdbaa.
Author: Noboru Saito <noborusai@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAAM3qn+7QUWW9R6_YwPKXmky0xGE4n63U3EsxZeWE_QtogeU8g@mail.gmail.com
Backpatch-through: 17
Peter Eisentraut