20 Commits (ca7f8e2b86e5f15a40b67e6199d714f45a467ff1)

Author	SHA1	Message	Date
Bruce Momjian	7559d8ebfa	Update copyrights for 2020 ... Backpatch-through: update all files in master, backpatch legal files through 9.4	6 years ago
Michael Paquier	8548ddc61b	Fix inconsistencies and typos in the tree, take 9 ... This addresses more issues with code comments, variable names and unreferenced variables. Author: Alexander Lakhin Discussion: https://postgr.es/m/7ab243e0-116d-3e44-d120-76b3df7abefd@gmail.com	7 years ago
Tom Lane	8255c7a5ee	Phase 2 pgindent run for v12. ... Switch to 2.1 version of pg_bsd_indent. This formats multiline function declarations "correctly", that is with additional lines of parameter declarations indented to match where the first line's left parenthesis is. Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com	7 years ago
Bruce Momjian	97c39498e5	Update copyright for 2019 ... Backpatch-through: certain files through 9.4	7 years ago
Bruce Momjian	9d4649ca49	Update copyright for 2018 ... Backpatch-through: certain files through 9.3	8 years ago
Tom Lane	c7b8998ebb	Phase 2 of pgindent updates. ... Change pg_bsd_indent to follow upstream rules for placement of comments to the right of code, and remove pgindent hack that caused comments following #endif to not obey the general rule. Commit e3860ffa4d wasn't actually using the published version of pg_bsd_indent, but a hacked-up version that tried to minimize the amount of movement of comments to the right of code. The situation of interest is where such a comment has to be moved to the right of its default placement at column 33 because there's code there. BSD indent has always moved right in units of tab stops in such cases --- but in the previous incarnation, indent was working in 8-space tab stops, while now it knows we use 4-space tabs. So the net result is that in about half the cases, such comments are placed one tab stop left of before. This is better all around: it leaves more room on the line for comment text, and it means that in such cases the comment uniformly starts at the next 4-space tab stop after the code, rather than sometimes one and sometimes two tabs after. Also, ensure that comments following #endif are indented the same as comments following other preprocessor commands such as #else. That inconsistency turns out to have been self-inflicted damage from a poorly-thought-through post-indent "fixup" in pgindent. This patch is much less interesting than the first round of indent changes, but also bulkier, so I thought it best to separate the effects. Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us	9 years ago
Alvaro Herrera	8eace46d34	Fix race condition in reading commit timestamps ... If a user requests the commit timestamp for a transaction old enough that its data is concurrently being truncated away by vacuum at just the right time, they would receive an ugly internal file-not-found error message from slru.c rather than the expected NULL return value. In a primary server, the window for the race is very small: the lookup has to occur exactly between the two calls by vacuum, and there's not a lot that happens between them (mostly just a multixact truncate). In a standby server, however, the window is larger because the truncation is executed as soon as the WAL record for it is replayed, but the advance of the oldest-Xid is not executed until the next checkpoint record. To fix in the primary, simply reverse the order of operations in vac_truncate_clog. To fix in the standby, augment the WAL truncation record so that the standby is aware of the new oldest-XID value and can apply the update immediately. WAL version bumped because of this. No backpatch, because of the low importance of the bug and its rarity. Author: Craig Ringer Reviewed-By: Petr Jelínek, Peter Eisentraut Discussion: https://postgr.es/m/CAMsr+YFhVtRQT1VAwC+WGbbxZZRzNou=N9Ed-FrCqkwQ8H8oJQ@mail.gmail.com	9 years ago
Bruce Momjian	1d25779284	Update copyright via script for 2017	9 years ago
Bruce Momjian	ee94300446	Update copyright for 2016 ... Backpatch certain files through 9.1	10 years ago
Joe Conway	241448b23a	Rename (new|old)estCommitTs to (new|old)estCommitTsXid ... The variables newestCommitTs and oldestCommitTs sound as if they are timestamps, but in fact they are the transaction Ids that correspond to the newest and oldest timestamps rather than the actual timestamps. Rename these variables to reflect that they are actually xids: to wit newestCommitTsXid and oldestCommitTsXid respectively. Also modify related code in a similar fashion, particularly the user facing output emitted by pg_controldata and pg_resetxlog. Complaint and patch by me, review by Tom Lane and Alvaro Herrera. Backpatch to 9.5 where these variables were first introduced.	10 years ago
Alvaro Herrera	69e7235c93	Fix commit timestamp initialization ... This module needs explicit initialization in order to replay WAL records in recovery, but we had broken this recently following changes to make other (stranger) scenarios work correctly. To fix, rework the initialization sequence so that it always takes place before WAL replay commences for both master and standby. I could have gone for a more localized fix that just added a "startup" call for the master server, but it seemed better to restructure the existing callers as well so that the whole thing made more sense. As a drawback, there is more control logic in xlog.c now than previously, but doing otherwise meant passing down the ControlFile flag, which seemed uglier as a whole. This also meant adding a check to not re-execute ActivateCommitTs if it had already been called. Reported by Fujii Masao. Backpatch to 9.5.	10 years ago
Alvaro Herrera	820ddb2c2f	Further tweak commit_timestamp behavior ... As pointed out by Fujii Masao, we weren't quite there on a standby behaving sanely: first because we were failing to acquire the correct state in the case where no XLOG_PARAMETER_CHANGE message was sent (because a checkpoint had already happened after the setting was changed in the master, and then the standby was restarted); and second because promoting the standby with the feature enabled failed to activate it if the master had the feature disabled. This patch fixes both those misbehaviors hopefully without re-introducing any old problems. Also change the hint emitted in a standby together with the error message about the feature being disabled, to make it point out that the place to chance the setting is the master. Otherwise, if the setting is already enabled in the standby, it is very confusing to have it say that the setting must be enabled ... Authors: Álvaro Herrera, Petr Jelínek. Backpatch to 9.5.	10 years ago
Alvaro Herrera	531d21b75f	Cleanup commit timestamp module activaction, again ... Further tweak commit_ts.c so that on a standby the state is completely consistent with what that in the master, rather than behaving differently in the cases that the settings differ. Now in standby and master the module should always be active or inactive in lockstep. Author: Petr Jelínek, with some further tweaks by Álvaro Herrera. Backpatch to 9.5, where commit timestamps were introduced. Discussion: http://www.postgresql.org/message-id/5622BF9D.2010409@2ndquadrant.com	10 years ago
Alvaro Herrera	f12e814b88	Fix commit_ts for standby ... Module initialization was still not completely correct after commit 6b61955135, per crash report from Takashi Ohnishi. To fix, instead of trying to monkey around with the value of the GUC setting directly, add a separate boolean flag that enables the feature on a standby, but only for the startup (recovery) process, when it sees that its master server has the feature enabled. Discussion: http://www.postgresql.org/message-id/ca44c6c7f9314868bdc521aea4f77cbf@MP-MSGSS-MBX004.msg.nttdata.co.jp Also change the deactivation routine to delete all segment files rather than leaving the last one around. (This doesn't need separate WAL-logging, because on recovery we execute the same deactivation routine anyway.) In passing, clean up the code structure somewhat, particularly so that xlog.c doesn't know so much about when to activate/deactivate the feature. Thanks to Fujii Masao for testing and Petr Jelínek for off-list discussion. Back-patch to 9.5, where commit_ts was introduced.	10 years ago
Alvaro Herrera	6b61955135	Code review for transaction commit timestamps ... There are three main changes here: 1. No longer cause a start failure in a standby if the feature is disabled in postgresql.conf but enabled in the master. This reverts one part of commit 4f3924d9cd43; what we keep is the ability of the standby to activate/deactivate the module (which includes creating and removing segments as appropriate) during replay of such actions in the master. 2. Replay WAL records affecting commitTS even if the feature is disabled. This means the standby will always have the same state as the master after replay. 3. Have COMMIT PREPARE record the transaction commit time as well. We were previously only applying it in the normal transaction commit path. Author: Petr Jelínek Discussion: http://www.postgresql.org/message-id/CAHGQGwHereDzzzmfxEBYcVQu3oZv6vZcgu1TPeERWbDc+gQ06g@mail.gmail.com Discussion: http://www.postgresql.org/message-id/CAHGQGwFuzfO4JscM9LCAmCDCxp_MfLvN4QdB+xWsS-FijbjTYQ@mail.gmail.com Additionally, I cleaned up nearby code related to replication origins, which I found a bit hard to follow, and fixed a couple of typos. Backpatch to 9.5, where this code was introduced. Per bug reports from Fujii Masao and subsequent discussion.	10 years ago
Bruce Momjian	807b9e0dff	pgindent run for 9.5	11 years ago
Andres Freund	5aa2350426	Introduce replication progress tracking infrastructure. ... When implementing a replication solution ontop of logical decoding, two related problems exist: * How to safely keep track of replication progress * How to change replication behavior, based on the origin of a row; e.g. to avoid loops in bi-directional replication setups The solution to these problems, as implemented here, consist out of three parts: 1) 'replication origins', which identify nodes in a replication setup. 2) 'replication progress tracking', which remembers, for each replication origin, how far replay has progressed in a efficient and crash safe manner. 3) The ability to filter out changes performed on the behest of a replication origin during logical decoding; this allows complex replication topologies. E.g. by filtering all replayed changes out. Most of this could also be implemented in "userspace", e.g. by inserting additional rows contain origin information, but that ends up being much less efficient and more complicated. We don't want to require various replication solutions to reimplement logic for this independently. The infrastructure is intended to be generic enough to be reusable. This infrastructure also replaces the 'nodeid' infrastructure of commit timestamps. It is intended to provide all the former capabilities, except that there's only 2^16 different origins; but now they integrate with logical decoding. Additionally more functionality is accessible via SQL. Since the commit timestamp infrastructure has also been introduced in 9.5 (commit 73c986add) changing the API is not a problem. For now the number of origins for which the replication progress can be tracked simultaneously is determined by the max_replication_slots GUC. That GUC is not a perfect match to configure this, but there doesn't seem to be sufficient reason to introduce a separate new one. Bumps both catversion and wal page magic. Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer Discussion: 20150216002155.GI15326@awork2.anarazel.de, 20140923182422.GA15776@alap3.anarazel.de, 20131114172632.GE7522@alap2.anarazel.de	11 years ago
Alvaro Herrera	4f3924d9cd	Keep CommitTs module in sync in standby and master ... We allow this module to be turned off on restarts, so a restart time check is enough to activate or deactivate the module; however, if there is a standby replaying WAL emitted from a master which is restarted, but the standby isn't, the state in the standby becomes inconsistent and can easily be crashed. Fix by activating and deactivating the module during WAL replay on parameter change as well as on system start. Problem reported by Fujii Masao in http://www.postgresql.org/message-id/CAHGQGwFhJ3CnHo1CELEfay18yg_RA-XZT-7D8NuWUoYSZ90r4Q@mail.gmail.com Author: Petr Jelínek	11 years ago
Bruce Momjian	4baaf863ec	Update copyright for 2015 ... Backpatch certain files through 9.0	11 years ago
Alvaro Herrera	73c986adde	Keep track of transaction commit timestamps ... Transactions can now set their commit timestamp directly as they commit, or an external transaction commit timestamp can be fed from an outside system using the new function TransactionTreeSetCommitTsData(). This data is crash-safe, and truncated at Xid freeze point, same as pg_clog. This module is disabled by default because it causes a performance hit, but can be enabled in postgresql.conf requiring only a server restart. A new test in src/test/modules is included. Catalog version bumped due to the new subdirectory within PGDATA and a couple of new SQL functions. Authors: Álvaro Herrera and Petr Jelínek Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven Singer, Peter Eisentraut	11 years ago