During logical decoding, we advance catalog_xmin of logical too early in
fast_forward mode, resulting in required catalog data being removed by
vacuum. This mode is normally used to advance the slot without processing
the changes, but we still can't let the slot's xmin to advance to an
incorrect value.
Commit f49a80c481 fixed a similar issue where the logical slot's
catalog_xmin was getting advanced prematurely during non-fast-forward
mode. During xl_running_xacts processing, instead of directly advancing
the slot's xmin to the oldest running xid in the record, it allowed the
xmin to be held back for snapshots that can be used for
not-yet-replayed transactions, as those might consider older txns as
running too. However, it missed the fact that the same problem can happen
during fast_forward mode decoding, as we won't build a base snapshot in
that mode, and the future call to get_changes from the same slot can miss
seeing the required catalog changes leading to incorrect reslts.
This commit allows building the base snapshot even in fast_forward mode to
prevent the early advancement of xmin.
Reported-by: Amit Kapila <amit.kapila16@gmail.com>
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/CAA4eK1LqWncUOqKijiafe+Ypt1gQAQRjctKLMY953J79xDBgAg@mail.gmail.com
Discussion: https://postgr.es/m/OS0PR01MB57163087F86621D44D9A72BF94BB2@OS0PR01MB5716.jpnprd01.prod.outlook.com
This commit is a backpatch of commit 4909b38af0 for 13.
Data loss can happen when the DDLs like ALTER PUBLICATION ... ADD TABLE ...
or ALTER TYPE ... that don't take a strong lock on table happens
concurrently to DMLs on the tables involved in the DDL. This happens
because logical decoding doesn't distribute invalidations to concurrent
transactions and those transactions use stale cache data to decode the
changes. The problem becomes bigger because we keep using the stale cache
even after those in-progress transactions are finished and skip the
changes required to be sent to the client.
This commit fixes the issue by distributing invalidation messages from
catalog-modifying transactions to all concurrent in-progress transactions.
This allows the necessary rebuild of the catalog cache when decoding new
changes after concurrent DDL.
The fix for 13 is different from what we did in branches 14 and above,
such that for 13, the concurrent DDL changes (from DDL types mentioned
earlier) will be visible for any newly started transactions. To make them
visible in concurrent transactions, we need to introduce a new change type
REORDER_BUFFER_CHANGE_INVALIDATION, already present in branches 14 and
greater. We decided not to take the risk of a bigger change and fix the
issue partially in 13.
Reported-by: hubert depesz lubaczewski <depesz@depesz.com>
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Tested-by: Benoit Lobréau <benoit.lobreau@dalibo.com>
Discussion: https://postgr.es/m/de52b282-1166-1180-45a2-8d8917ca74c6@enterprisedb.com
Discussion: https://postgr.es/m/CAD21AoAenVqiMjpN-PvGHL1N9DWnHSq673bfgr6phmBUzx=kLQ@mail.gmail.com
Discussion: https://postgr.es/m/CAD21AoAhU3kp8shYqP=ExiFDZ9sZxpFb5WzLa0p+vEe5j+7CWQ@mail.gmail.com
When creating and initializing a logical slot, the restart_lsn is set
to the latest WAL insertion point (or the latest replay point on
standbys). Subsequently, WAL records are decoded from that point to
find the start point for extracting changes in the
DecodingContextFindStartpoint() function. Since the initial
restart_lsn could be in the middle of a transaction, the start point
must be a consistent point where we won't see the data for partial
transactions.
Previously, when not building a full snapshot, serialized snapshots
were restored, and the SnapBuild jumps to the consistent state even
while finding the start point. Consequently, the slot's restart_lsn
and confirmed_flush could be set to the middle of a transaction. This
could lead to various unexpected consequences. Specifically, there
were reports of logical decoding decoding partial transactions, and
assertion failures occurred because only subtransactions were decoded
without decoding their top-level transaction until decoding the commit
record.
To resolve this issue, the changes prevent restoring the serialized
snapshot and jumping to the consistent state while finding the start
point.
On v17 and HEAD, a flag indicating whether snapshot restores should be
skipped has been added to the SnapBuild struct, and SNAPBUILD_VERSION
has been bumpded.
On backbranches, the flag is stored in the LogicalDecodingContext
instead, preserving on-disk compatibility.
Backpatch to all supported versions.
Reported-by: Drew Callahan
Reviewed-by: Amit Kapila, Hayato Kuroda
Discussion: https://postgr.es/m/2444AA15-D21B-4CCE-8052-52C7C2DAFE5C%40amazon.com
Backpatch-through: 12
When the logical decoding restarts from NEW_CID, since there is no
association between the top transaction and its subtransaction, both are
created as top transactions and have the same LSN. This caused the
assertion failure in AssertTXNLsnOrder().
This patch skips the assertion check until we reach the LSN at which we
start decoding the contents of the transaction, specifically
start_decoding_at LSN in SnapBuild. This is okay because we don't
guarantee to make the association between top transaction and
subtransaction until we try to decode the actual contents of transaction.
The ordering of the records prior to the start_decoding_at LSN should have
been checked before the restart.
The other assertion failure is due to the reason that we forgot to track
that we have considered top-level transaction id in the list of catalog
changing transactions that were committed when one of its subtransactions
is marked as containing catalog change.
Reported-by: Tomas Vondra, Osumi Takamichi
Author: Masahiko Sawada, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi, Masahiko Sawada
Backpatch-through: 10
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
Discussion: https://postgr.es/m/TYCPR01MB83733C6CEAE47D0280814D5AED7A9%40TYCPR01MB8373.jpnprd01.prod.outlook.com
Previously, we relied on HEAP2_NEW_CID records and XACT_INVALIDATION
records to know if the transaction has modified the catalog, and that
information is not serialized to snapshot. Therefore, after the restart,
if the logical decoding decodes only the commit record of the transaction
that has actually modified a catalog, we will miss adding its XID to the
snapshot. Thus, we will end up looking at catalogs with the wrong
snapshot.
To fix this problem, this changes the snapshot builder so that it
remembers the last-running-xacts list of the decoded RUNNING_XACTS record
after restoring the previously serialized snapshot. Then, we mark the
transaction as containing catalog changes if it's in the list of initial
running transactions and its commit record has XACT_XINFO_HAS_INVALS. To
avoid ABI breakage, we store the array of the initial running transactions
in the static variables InitialRunningXacts and NInitialRunningXacts,
instead of storing those in SnapBuild or ReorderBuffer.
This approach has a false positive; we could end up adding the transaction
that didn't change catalog to the snapshot since we cannot distinguish
whether the transaction has catalog changes only by checking the COMMIT
record. It doesn't have the information on which (sub) transaction has
catalog changes, and XACT_XINFO_HAS_INVALS doesn't necessarily indicate
that the transaction has catalog change. But that won't be a problem since
we use snapshot built during decoding only to read system catalogs.
On the master branch, we took a more future-proof approach by writing
catalog modifying transactions to the serialized snapshot which avoids the
above false positive. But we cannot backpatch it because of a change in
the SnapBuild.
Reported-by: Mike Oh
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Shi yu, Takamichi Osumi, Kyotaro Horiguchi, Bertrand Drouvot, Ahsan Hadi
Backpatch-through: 10
Discussion: https://postgr.es/m/81D0D8B0-E7C4-4999-B616-1E5004DBDCD2%40amazon.com
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
When using replication origins, pg_replication_origin_xact_setup() is an
optional choice to be able to set a LSN and a timestamp to mark the
origin, which would be additionally added to WAL for transaction commits
or aborts (including 2PC transactions). An assertion in the code path
of PREPARE TRANSACTION assumed that this data should always be set, so
it would trigger when using replication origins without setting up an
origin LSN. Some tests are added to cover more this kind of scenario.
Oversight in commit 1eb6d65.
Per discussion with Amit Kapila and Masahiko Sawada.
Discussion: https://postgr.es/m/YbbBfNSvMm5nIINV@paquier.xyz
Backpatch-through: 11
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
Previously, isolationtester displayed SQL query results using some
ad-hoc code that clearly hadn't had much effort expended on it.
Field values longer than 14 characters weren't separated from
the next field, and usually caused misalignment of the columns
too. Also there was no visual separation of a query's result
from subsequent isolationtester output. This made test result
files confusing and hard to read.
To improve matters, let's use libpq's PQprint() function. Although
that's long since unused by psql, it's still plenty good enough
for the purpose here.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/582362.1623798221@sss.pgh.pa.us
We've long contended with isolation test results that aren't entirely
stable. Some test scripts insert long delays to try to force stable
results, which is not terribly desirable; but other erratic failure
modes remain, causing unrepeatable buildfarm failures. I've spent a
fair amount of time trying to solve this by improving the server-side
support code, without much success: that way is fundamentally unable
to cope with diffs that stem from chance ordering of arrival of
messages from different server processes.
We can improve matters on the client side, however, by annotating
the test scripts themselves to show the desired reporting order
of events that might occur in different orders. This patch adds
three types of annotations to deal with (a) test steps that might or
might not complete their waits before the isolationtester can see them
waiting; (b) test steps in different sessions that can legitimately
complete in either order; and (c) NOTIFY messages that might arrive
before or after the completion of a step in another session. We might
need more annotation types later, but this seems to be enough to deal
with the instabilities we've seen in the buildfarm. It also lets us
get rid of all the long delays that were previously used, cutting more
than a minute off the runtime of the isolation tests.
Back-patch to all supported branches, because the buildfarm
instabilities affect all the branches, and because it seems desirable
to keep isolationtester's capabilities the same across all branches
to simplify possible future back-patching of tests.
Discussion: https://postgr.es/m/327948.1623725828@sss.pgh.pa.us
Lack of these checks could cause visible misbehavior, including
assertion failures. This was missed in commit c655077639, whereby
restart_lsn becomes invalid when the size limit is exceeded.
Also reword some existing error messages, and add errdetail(), so that
the reported errors all match in spirit.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200408.093710.447591748588426656.horikyota.ntt@gmail.com
The txid_XXX family of fmgr functions exposes 64 bit transaction IDs to
users as int8. Now that we have an SQL type xid8 for FullTransactionId,
define a new set of functions including pg_current_xact_id() and
pg_current_snapshot() based on that. Keep the old functions around too,
for now.
It's a bit sneaky to use the same C functions for both, but since the
binary representation is identical except for the signedness of the
type, and since older functions are the ones using the wrong signedness,
and since we'll presumably drop the older ones after a reasonable period
of time, it seems reasonable to switch to FullTransactionId internally
and share the code for both.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
Manifested as
ERROR: subtransaction logged without previous top-level txn record
this check forbids legit behaviours like
- First xl_xact_assignment record is beyond reading, i.e. earlier
restart_lsn.
- After restart_lsn there is some change of a subxact.
- After that, there is second xl_xact_assignment (for another subxact)
revealing the relationship between top and first subxact.
Such a transaction won't be streamed anyway because we hadn't seen it in
full. Saying for sure whether xact of some record encountered after
the snapshot was deserialized can be streamed or not requires to know
whether it wrote something before deserialization point --if yes, it
hasn't been seen in full and can't be decoded. Snapshot doesn't have such
info, so there is no easy way to relax the check.
Reported-by: Hsu, John
Diagnosed-by: Arseny Sher
Author: Arseny Sher, Amit Kapila
Reviewed-by: Amit Kapila, Dilip Kumar
Backpatch-through: 9.5
Discussion: https://postgr.es/m/AB5978B2-1772-4FEE-A245-74C91704ECB0@amazon.com
In commit 18555b132 we tentatively established a rule that regression
tests should use names containing "regression" for databases, and names
starting with "regress_" for all other globally-visible object names, so
as to circumscribe the side-effects that "make installcheck" could have on
an existing installation. However, no enforcement mechanism was created,
so it's unsurprising that some new violations have crept in since then.
In fact, a whole new *category* of violations has crept in, to wit we now
also have globally-visible subscription and replication origin names, and
"make installcheck" could very easily clobber user-created objects of
those types. So it's past time to do something about this.
This commit sanitizes the tests enough that they will pass (i.e. not
generate any visible warnings) with the enforcement mechanism I'll add
in the next commit. There are some TAP tests that still trigger the
warnings, but the warnings do not cause test failure. Since these tests
do not actually run against a pre-existing installation, there's no need
to worry whether they could conflict with user-created objects.
The problem with rolenames.sql testing special role names like "user"
is still there, and is dealt with only very cosmetically in this patch
(by hiding the warnings :-(). What we actually need to do to be safe is
to take that test script out of "make installcheck" altogether, but that
seems like material for a separate patch.
Discussion: https://postgr.es/m/16638.1468620817@sss.pgh.pa.us
When reindexing individual indexes on pg_class it was possible to
either trigger an assertion failure:
TRAP: FailedAssertion("!(!ReindexIsProcessingIndex(((index)->rd_id)))
That's because reindex_index() called SetReindexProcessing() - which
enables an asserts ensuring no index insertions happen into the index
- before calling RelationSetNewRelfilenode(). That not correct for
indexes on pg_class, because RelationSetNewRelfilenode() updates the
relevant pg_class row, which needs to update the indexes.
The are two reasons this wasn't noticed earlier. Firstly the bug
doesn't trigger when reindexing all of pg_class, as reindex_relation
has code "hiding" all yet-to-be-reindexed indexes. Secondly, the bug
only triggers when the the update to pg_class doesn't turn out to be a
HOT update - otherwise there's no index insertion to trigger the
bug. Most of the time there's enough space, making this bug hard to
trigger.
To fix, move RelationSetNewRelfilenode() to before the
SetReindexProcessing() (and, together with some other code, to outside
of the PG_TRY()).
To make sure the error checking intended by SetReindexProcessing() is
more robust, modify CatalogIndexInsert() to check
ReindexIsProcessingIndex() even when the update is a HOT update.
Also add a few regression tests for REINDEXing of system catalogs.
The last two improvements would have prevented some of the issues
fixed in 5c1560606d from being introduced in the first place.
Reported-By: Michael Paquier
Diagnosed-By: Tom Lane and Andres Freund
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20190418011430.GA19133@paquier.xyz
Backpatch: 9.4-, the bug is present in all branches
This allows the user to create duplicates of existing replication slots,
either logical or physical, and even changing properties such as whether
they are temporary or the output plugin used.
There are multiple uses for this, such as initializing multiple replicas
using the slot for one base backup; when doing investigation of logical
replication issues; and to select a different output plugins.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Andres Freund, Petr Jelinek
Discussion: https://postgr.es/m/CAD21AoAm7XX8y_tOPP6j4Nzzch12FvA1wPqiO690RCk+uYVstg@mail.gmail.com
Ever since its birth, ReorderBufferBuildTupleCidHash() has contained an
assertion that a catalog tuple cannot change Cmax after acquiring one. But
that's wrong: if a subtransaction executes DDL that affects that catalog
tuple, and later aborts and another DDL affects the same tuple, it will
change Cmax. Relax the assertion to merely verify that the Cmax remains
valid and monotonically increasing, instead.
Add a test that tickles the relevant code.
Diagnosed by, and initial patch submitted by: Arseny Sher
Co-authored-by: Arseny Sher
Discussion: https://postgr.es/m/874l9p8hyw.fsf@ars-thinkpad
Repeatedly rewriting a mapped catalog table with VACUUM FULL or
CLUSTER could cause logical decoding to fail with:
ERROR, "could not map filenode \"%s\" to relation OID"
To trigger the problem the rewritten catalog had to have live tuples
with toasted columns.
The problem was triggered as during catalog table rewrites the
heap_insert() check that prevents logical decoding information to be
emitted for system catalogs, failed to treat the new heap's toast table
as a system catalog (because the new heap is not recognized as a
catalog table via RelationIsLogicallyLogged()). The relmapper, in
contrast to the normal catalog contents, does not contain historical
information. After a single rewrite of a mapped table the new relation
is known to the relmapper, but if the table is rewritten twice before
logical decoding occurs, the relfilenode cannot be mapped to a
relation anymore. Which then leads us to error out. This only
happens for toast tables, because the main table contents aren't
re-inserted with heap_insert().
The fix is simple, add a new heap_insert() flag that prevents logical
decoding information from being emitted, and accept during decoding
that there might not be tuple data for toast tables.
Unfortunately that does not fix pre-existing logical decoding
errors. Doing so would require not throwing an error when a filenode
cannot be mapped to a relation during decoding, and that seems too
likely to hide bugs. If it's crucial to fix decoding for an existing
slot, temporarily changing the ERROR in ReorderBufferCommit() to a
WARNING appears to be the best fix.
Author: Andres Freund
Discussion: https://postgr.es/m/20180914021046.oi7dm4ra3ot2g2kt@alap3.anarazel.de
Backpatch: 9.4-, where logical decoding was introduced
Without that the tests fail when forced to be run against a cluster
with synchronous_commit = off (as the WAL might not yet be flushed to
disk by the point logical decoding gets called, and thus the expected
output breaks). Most tests already do that, add it to a few newer tests.
Author: Andres Freund
This was broken in commit 9c7d06d606, which inadvertently gave the
wrong value to fast_forward in one StartupDecodingContext call. Fix by
flipping the value. Add a test for the obvious error, namely trying to
initialize a replication slot with an nonexistent output plugin.
While at it, move the CreateDecodingContext call earlier, so that any
errors are reported before sending the CopyBoth message.
Author: Dave Cramer <davecramer@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CADK3HHLVkeRe1v4P02-5hj55H3_yJg3AEtpXyEY5T3wuzO2jSg@mail.gmail.com
Such replication slots are physical slots freshly created without WAL
being reserved, which is the default behavior, which have not been used
yet as WAL consumption resources to retain WAL. This prevents advancing
a slot to a position older than any WAL available, which could falsify
calculations for WAL segment recycling.
This also cleans up a bit the code, as ReplicationSlotRelease() would be
called on ERROR, and improves error messages.
Reported-by: Kyotaro Horiguchi
Author: Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/20180626071305.GH31353@paquier.xyz
Change a whole-database VACUUM into doing just pg_attribute, which is
the portion that verifies what we want it to do. The original
formulation wastes a lot of CPU time, which leads the test to fail when
runtime exceeds isolationtester timeout when it's super-slow, such as
under CLOBBER_CACHE_ALWAYS. Per buildfarm member friarbird.
It turns out that the previous shape of the test doesn't always detect
the condition it is supposed to detect (on unpatched reorderbuffer
code): the reason is that there is a good chance of encountering a
xl_running_xacts record (logged every 15 seconds) before the checkpoint
-- and because we advance the xmin when we receive that WAL record, and
we *don't* advance the xmin twice consecutively without receiving a
client message in between, that means the xmin is not advanced enough
for the tuple to be pruned from pg_attribute by VACUUM. So the test
would spuriously pass.
The reason this test deficiency wasn't detected earlier is that HOT
pruning removes the tuple anyway, even if vacuum leaves it in place, so
the test correctly fails (detecting the coding mistake), but for the
wrong reason.
To fix this mess, run the s0_get_changes step twice before vacuum
instead of once: this seems to cause the xmin to be advanced reliably,
wreaking havoc with more certainty.
Author: Arseny Sher
Discussion: https://postgr.es/m/87h8lkuxoa.fsf@ars-thinkpad
Two closely related bugs are fixed. First, xmin of logical slots was
advanced too early. During xl_running_xacts processing, xmin of the
slot was set to the oldest running xid in the record, but that's wrong:
actually, snapshots which will be used for not-yet-replayed transactions
might consider older txns as running too, so we need to keep xmin back
for them. The problem wasn't noticed earlier because DDL which allows
to delete tuple (set xmax) while some another not-yet-committed
transaction looks at it is pretty rare, if not unique: e.g. all forms of
ALTER TABLE which change schema acquire ACCESS EXCLUSIVE lock
conflicting with any inserts. The included test case (test_decoding's
oldest_xmin) uses ALTER of a composite type, which doesn't have such
interlocking.
To deal with this, we must be able to quickly retrieve oldest xmin
(oldest running xid among all assigned snapshots) from ReorderBuffer. To
fix, add another list of ReorderBufferTXNs to the reorderbuffer, where
transactions are sorted by base-snapshot-LSN. This is slightly
different from the existing (sorted by first-LSN) list, because a
transaction can have an earlier LSN but a later Xmin, if its first
record does not obtain an xmin (eg. xl_xact_assignment). Note this new
list doesn't fully replace the existing txn list: we still need that one
to prevent WAL recycling.
The second issue concerns SnapBuilder snapshots and subtransactions.
SnapBuildDistributeNewCatalogSnapshot never assigned a snapshot to a
transaction that is known to be a subtxn, which is good in the common
case that the top-level transaction already has one (no point in doing
so), but a bug otherwise. To fix, arrange to transfer the snapshot from
the subtxn to its top-level txn as soon as the kinship gets known.
test_decoding's snapshot_transfer verifies this.
Also, fix a minor memory leak: refcount of toplevel's old base snapshot
was not decremented when the snapshot is transferred from child.
Liberally sprinkle code comments, and rewrite a few existing ones. This
part is my (Álvaro's) contribution to this commit, as I had to write all
those comments in order to understand the existing code and Arseny's
patch.
Reported-by: Arseny Sher <a.sher@postgrespro.ru>
Diagnosed-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Arseny Sher <a.sher@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/87lgdyz1wj.fsf@ars-thinkpad
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Logical decoding should not publish anything about tables created as
part of a heap rewrite during DDL. Those tables don't exist externally,
so consumers of logical decoding cannot do anything sensible with that
information. In ab28feae2b, we worked
around this for built-in logical replication, but that was hack.
This is a more proper fix: We mark such transient heaps using the new
field pg_class.relwrite, linking to the original relation OID. By
default, we ignore them in logical decoding before they get to the
output plugin. Optionally, a plugin can register their interest in
getting such changes, if they handle DDL specially, in which case the
new field will help them get information about the actual table.
Reviewed-by: Craig Ringer <craig@2ndquadrant.com>
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Ability to advance both physical and logical replication slots using a
new user function pg_replication_slot_advance().
For logical advance that means records are consumed as fast as possible
and changes are not given to output plugin for sending. Makes 2nd phase
(after we reached SNAPBUILD_FULL_SNAPSHOT) of replication slot creation
faster, especially when there are big transactions as the reorder buffer
does not have to deal with data changes and does not have to spill to
disk.
Author: Petr Jelinek
Reviewed-by: Simon Riggs
The logical decoding functions do BeginInternalSubTransaction and
RollbackAndReleaseCurrentSubTransaction to clean up after themselves.
It turns out that AtEOSubXact_SPI has an unrecognized assumption that
we always need to cancel the active SPI operation in the SPI context
that surrounds the subtransaction (if there is one). That's true
when the RollbackAndReleaseCurrentSubTransaction call is coming from
the SPI-using function itself, but not when it's happening inside
some unrelated function invoked by a SPI query. In practice the
affected callers are the various PLs.
To fix, record the current subtransaction ID when we begin a SPI
operation, and clean up only if that ID is the subtransaction being
canceled.
Also, remove AtEOSubXact_SPI's assertion that it must have cleaned
up the surrounding SPI context's active tuptable. That's proven
wrong by the same test case.
Also clarify (or, if you prefer, reinterpret) the calling conventions
for _SPI_begin_call and _SPI_end_call. The memory context cleanup
in the latter means that these have always had the flavor of a matched
resource-management pair, but they weren't documented that way before.
Per report from Ben Chobot.
Back-patch to 9.4 where logical decoding came in. In principle,
the SPI changes should go all the way back, since the problem dates
back to commit 7ec1c5a86. But given the lack of field complaints
it seems few people are using internal subtransactions in this way.
So I don't feel a need to take any risks in 9.2/9.3.
Discussion: https://postgr.es/m/73FBA179-C68C-4540-9473-71E865408B15@silentmedia.com
The snapshot assembly during the creation of logical slots relied
waiting for transactions in xl_running_xacts to end, by checking for
their commit/abort records. Unfortunately, despite locking, it is
possible to see an xl_running_xact record listing transactions as
ready, that have already WAL-logged an commit/abort record, as the
locking just prevents the ProcArray to be adjusted, and the commit
record has to be logged first.
That lead to either delayed or hanging snapshot creation, because
snapbuild.c would wait "forever" to see commit/abort records for some
transactions. That hang resolved only if a xl_running_xacts record
without any running transactions happened to be logged, far from
certain on a busy server.
It's impractical to prevent that via more heavyweight locking, the
likelihood of deadlocks and significantly increased contention would
be too big.
Instead change the initial snapshot creation to be solely based on
tracking the oldest running transaction via
xl_running_xacts->oldestRunningXid - that actually ends up
significantly simplifying the code. That has two disadvantages:
1) Because we cannot fully "trust" the contents of xl_running_xacts,
we cannot use it to build the initial snapshot. Instead we have to
wait twice for all running transactions to finish.
2) Previously a slot, unless the race occurred, could be created when
the all transaction perceived as running based on commit/abort
records, now we have to wait for the next xl_running_xacts record.
To address that, trigger logging new xl_running_xacts record from
within snapbuild.c exactly when necessary.
Unfortunately snabuild.c's SnapBuild is stored on disk, one of the
stupider ideas of a certain Mr Freund, so we can't change it in a
minor release. As this is going to be backpatched, we have to hack
around a bit to keep on-disk compatibility. A later commit will
rejigger that on master.
Author: Andres Freund, based on a quite different patch from Petr Jelinek
Analyzed-By: Petr Jelinek
Reviewed-By: Petr Jelinek
Discussion: https://postgr.es/m/f37e975c-908f-858e-707f-058d3b1eb214@2ndquadrant.com
Backpatch: 9.4-, where logical decoding has been introduced
Per discussion, "location" is a rather vague term that could refer to
multiple concepts. "LSN" is an unambiguous term for WAL locations and
should be preferred. Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position". Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.
David Rowley, minor additional docs hacking by me
Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com
Commit f82ec32ac3 renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
Fix the tests on slow machines (per buildfarm).
Add test for dropping on error. And also try to consume real changes
from temporary slots.
From: Petr Jelinek <petr.jelinek@2ndquadrant.com>
This test, just added in commit a924c327e, sometimes fails because
the old backend hasn't finished dropping the temporary replication slot
when the new backend looks. Borrow the previously-invented methodology
for waiting for the old process to disappear from pg_stat_activity.
Petr Jelinek
Discussion: https://postgr.es/m/62935e6f-4f1b-c433-e0fa-7f936a38b3e5@2ndquadrant.com
This allows creating temporary replication slots that are removed
automatically at the end of the session or on error.
From: Petr Jelinek <petr.jelinek@2ndquadrant.com>
A little COLLATE "C" goes a long way.
Pavel Stehule, per suggestion from Craig Ringer
Discussion: <CAFj8pRA8nJZcozgxN=RMSqMmKuHVOkcGAAKPKdFeiMWGDSUDLA@mail.gmail.com>
Similar to 0137caf273, this makes contrib and pl tests less dependant on
hash-table order. After this commit, at least some order affecting
changes to execGrouping.c don't result in regression test changes
anymore.
Before initializing iteration over a subtransaction's changes, the last
few changes were not spilled to disk. That's correct if the transaction
didn't spill to disk, but otherwise... This bug can lead to missed or
misorderd subtransaction contents when they were spilled to disk.
Move spilling of the remaining in-memory changes to
ReorderBufferIterTXNInit(), where it can easily be applied to the top
transaction and, if present, subtransactions.
Since this code had too many bugs already, noticeably increase test
coverage.
Fixes: #14319
Reported-By: Huan Ruan
Discussion: <20160909012610.20024.58169@wrigleys.postgresql.org>
Backport: 9,4-, where logical decoding was added
Amit Kapila