Per buildfarm animal Hornet and followup manual testing by Noah Misch,
it appears xlc miscompiles code using "restrict" in at least some
cases. Allow disabling restrict usage with FORCE_DISABLE_RESTRICT=yes
in template files, and do so for aix/xlc.
Author: Andres Freund and Tom Lane
Discussion: https://postgr.es/m/1820.1507918762@sss.pgh.pa.us
Unfortunately using 'restrict' plainly causes problems with MSVC,
which supports restrict only as '__restrict'. Defining 'restrict' to
'__restrict' unfortunately causes a conflict with MSVC's usage of
__declspec(restrict) in headers.
Therefore define pg_restrict to the appropriate keyword instead, and
replace existing usages.
This replaces the temporary workaround introduced in 36b4b91ba0.
Author: Andres Freund
Discussion: https://postgr.es/m/2656.1507830907@sss.pgh.pa.us
Will be used in later commits improving performance for a few key
routines where information about aliasing allows for significantly
better code generation.
This allows to use the C99 'restrict' keyword without breaking C89, or
for that matter C++, compilers. If not supported it's defined to be
empty.
Author: Andres Freund
Discussion: https://postgr.es/m/20170914063418.sckdzgjfrsbekae4@alap3.anarazel.de
The previous placement of the fallback implementation in libpgcommon
was problematic, because libpqport functions need strnlen
functionality.
Move replacement into libpgport. Provide strnlen() under its posix
name, instead of pg_strnlen(). Fix stupid configure bug, executing the
test only when compiled with threading support.
Author: Andres Freund
Discussion: https://postgr.es/m/E1e1gR2-0005fB-SI@gemulon.postgresql.org
Upcoming patches are going to address performance issues that involve
slow system provided ntohs/htons etc. To address that expand
pg_bswap.h to provide pg_ntoh{16,32,64}, pg_hton{16,32,64} and
optimize their respective implementations by using compiler intrinsics
for gcc compatible compilers and msvc. Fall back to manual
implementations using shifts etc otherwise.
Additionally remove multiple evaluation hazards from the existing
BSWAP32/64 macros, by replacing them with inline functions when
necessary. In the course of that the naming scheme is changed to
pg_bswap16/32/64.
Author: Andres Freund
Discussion: https://postgr.es/m/20170927172019.gheidqy6xvlxb325@alap3.anarazel.de
On Linux, shared memory segments created with shm_open() are backed by
swap files created in tmpfs. If the swap file needs to be extended,
but there's no tmpfs space left, you get a very unfriendly SIGBUS trap.
To avoid this, force allocation of the full request size when we create
the segment. This adds a few cycles, but none that we wouldn't expend
later anyway, assuming the request isn't hugely bigger than the actual
need.
Make this code #ifdef __linux__, because (a) there's not currently a
reason to think the same problem exists on other platforms, and (b)
applying posix_fallocate() to an FD created by shm_open() isn't very
portable anyway.
Back-patch to 9.4 where the DSM code came in.
Thomas Munro, per a bug report from Amul Sul
Discussion: https://postgr.es/m/1002664500.12301802.1471008223422.JavaMail.yahoo@mail.yahoo.com
These functions are required by SUS v2, which is our minimum baseline
for Unix platforms, and are present on all interesting Windows versions
as well. Even our oldest buildfarm members have them. Thus, we were not
testing the "!USE_WIDE_UPPER_LOWER" code paths, which explains why the bug
fixed in commit e6023ee7f escaped detection. Per discussion, there seems
to be no more real-world value in maintaining this option. Hence, remove
the configure-time tests for wcstombs() and towlower(), remove the
USE_WIDE_UPPER_LOWER symbol, and remove all the !USE_WIDE_UPPER_LOWER code.
There's not actually all that much of the latter, but simplifying the #if
nests is a win in itself.
Discussion: https://postgr.es/m/20170921052928.GA188913@rfd.leadboat.com
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
Instead of using a cast to force the constant to be the right width,
assume we can plaster on an L, UL, LL, or ULL suffix as appropriate.
The old approach to this is very hoary, dating from before we were
willing to require compilers to have working int64 types.
This fix makes the PG_INT64_MIN, PG_INT64_MAX, and PG_UINT64_MAX
constants safe to use in preprocessor conditions, where a cast
doesn't work. Other symbolic constants that might be defined using
[U]INT64CONST are likewise safer than before.
Also fix the SIZE_MAX macro to be similarly safe, if we are forced
to provide a definition for that. The test added in commit 2e70d6b5e
happens to do what we want even with the hack "(size_t) -1" definition,
but we could easily get burnt on other tests in future.
Back-patch to all supported branches, like the previous commits.
Discussion: https://postgr.es/m/15883.1504278595@sss.pgh.pa.us
Various bugs can cause crashes, so don't use that function before ICU
53. It will fall back to the code path used for other encodings.
Since we now tie the function availability to an ICU version, we don't
need the configure test anymore. That also resolves the issue that the
test result was previously hardcoded for Windows.
researched by Daniel Verite <daniel@manitou-mail.org>, Peter Geoghegan
<pg@bowt.ie>, Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/f1438ec6-22aa-4029-9a3b-26f79d330e72%40manitou-mail.org
The check for IPC::Run we added in commit c254970ad is useful in simple
cases, but there are real use-cases where "prove" is coming from a
different Perl installation than the "perl" we want to use to build.
In such cases asking whether "perl" knows about IPC::Run is irrelevant
and can cause an unnecessary configure failure. Hence, if user has
specified a value for PROVE, skip the IPC::Run check. Per discussion
with Andrew Dunstan.
Discussion: https://postgr.es/m/E1dcE5n-0005Sk-UE@gemulon.postgresql.org
Without ICU's header files, "configure --with-icu" would succeed anyway,
at least when using the non-pkgconfig-based setup. Then you got a bunch of
ugly failures at build. Add an explicit header check to tighten that up.
Peter Eisentraut noted that commit 40b9f1921 had broken a configure
behavior that some people might rely on: AC_CHECK_PROGS(FOO,...) will
allow the search to be overridden by specifying a value for FOO on
configure's command line or in its environment, but AC_PATH_PROGS(FOO,...)
accepts such an override only if it's an absolute path. We had worked
around that behavior for some, but not all, of the pre-existing uses
of AC_PATH_PROGS by just skipping the macro altogether when FOO is
already set. Let's standardize on that workaround for all uses of
AC_PATH_PROGS, new and pre-existing, by wrapping AC_PATH_PROGS in a
new macro PGAC_PATH_PROGS. While at it, fix a deficiency of the old
workaround code by making sure we report the setting to configure's log.
Eventually I'd like to improve PGAC_PATH_PROGS so that it converts
non-absolute override inputs to absolute form, eg "PYTHON=python3"
becomes, say, PYTHON = /usr/bin/python3. But that will take some
nontrivial coding so it doesn't seem like a thing to do in late beta.
Discussion: https://postgr.es/m/90a92a7d-938e-507a-3bd7-ecd2b4004689@2ndquadrant.com
Previously we had a mix of uses of AC_CHECK_PROG[S] and AC_PATH_PROG[S].
The only difference between those macros is that the latter emits the
full path to the program it finds, eg "/usr/bin/prove", whereas the
former emits just "prove". Let's standardize on always emitting the
full path; this is better for documentation of the build, and it might
prevent some types of failures if later build steps are done with
a different PATH setting.
I did not touch the AC_CHECK_PROG[S] calls in ax_pthread.m4 and
ax_prog_perl_modules.m4. There seems no need to make those diverge from
upstream, since we do not record the programs sought by the former, while
the latter's call to AC_CHECK_PROG(PERL,...) will never be reached.
Discussion: https://postgr.es/m/25937.1501433410@sss.pgh.pa.us
The Perl documentation is very clear that stuff calling libperl should
be built with the compiler switches shown by Perl's $Config{ccflags}.
We'd been ignoring that up to now, and mostly getting away with it,
but recent Perl versions contain ABI compatibility cross-checks that
fail on some builds because of this omission. In particular the
sizeof(PerlInterpreter) can come out different due to some fields being
added or removed; which means we have a live ABI hazard that we'd better
fix rather than continuing to sweep it under the rug.
However, it still seems like a bad idea to just absorb $Config{ccflags}
verbatim. In some environments Perl was built with a different compiler
that doesn't even use the same switch syntax. -D switch syntax is pretty
universal though, and absorbing Perl's -D switches really ought to be
enough to fix the problem.
Furthermore, Perl likes to inject stuff like -D_LARGEFILE_SOURCE and
-D_FILE_OFFSET_BITS=64 into $Config{ccflags}, which affect libc ABIs on
platforms where they're relevant. Adopting those seems dangerous too.
It's unclear whether a build wherein Perl and Postgres have different ideas
of sizeof(off_t) etc would work, or whether anyone would care about making
it work. But it's dead certain that having different stdio ABIs in
core Postgres and PL/Perl will not work; we've seen that movie before.
Therefore, let's also ignore -D switches for symbols beginning with
underscore. The symbols that we actually need to import should be the ones
mentioned in perl.h's PL_bincompat_options stanza, and none of those start
with underscore, so this seems likely to work. (If it turns out not to
work everywhere, we could consider intersecting the symbols mentioned in
PL_bincompat_options with the -D switches. But that will be much more
complicated, so let's try this way first.)
This will need to be back-patched, but first let's see what the
buildfarm makes of it.
Ashutosh Sharma, some adjustments by me
Discussion: https://postgr.es/m/CANFyU97OVQ3+Mzfmt3MhuUm5NwPU=-FtbNH5Eb7nZL9ua8=rcA@mail.gmail.com
The TAP tests mostly don't work without IPC::Run, and the reason for
the failure is not immediately obvious from the error messages you get.
So teach configure to reject --enable-tap-tests unless IPC::Run exists.
Mostly this just involves adding ax_prog_perl_modules.m4 from the GNU
autoconf archives.
This was discussed last year, but we held off on the theory that we might
be switching to CMake soon. That's evidently not happening for v10,
so let's absorb this now.
Eugene Kazakov and Michael Paquier
Discussion: https://postgr.es/m/56BDDC20.9020506@postgrespro.ru
Discussion: https://postgr.es/m/CAB7nPqRVKG_CR4Dy_AMfE6DXcr6F7ygy2goa2atJU4XkerDRUg@mail.gmail.com
This reverts commit 81069a9efc.
Buildfarm results suggest that some platforms have versions of pselect(2)
that are not merely non-atomic, but flat out non-functional. Revert the
use-pselect patch to confirm this diagnosis (and exclude the no-SA_RESTART
patch as the source of trouble). If it's so, we should probably look into
blacklisting specific platforms that have broken pselect.
Discussion: https://postgr.es/m/9696.1493072081@sss.pgh.pa.us
Traditionally we've unblocked signals, called select(2), and then blocked
signals again. The code expects that the select() will be cancelled with
EINTR if an interrupt occurs; but there's a race condition, which is that
an already-pending signal will be delivered as soon as we unblock, and then
when we reach select() there will be nothing preventing it from waiting.
This can result in a long delay before we perform any action that
ServerLoop was supposed to have taken in response to the signal. As with
the somewhat-similar symptoms fixed by commit 893902085, the main practical
problem is slow launching of parallel workers. The window for trouble is
usually pretty short, corresponding to one iteration of ServerLoop; but
it's not negligible.
To fix, use pselect(2) in place of select(2) where available, as that's
designed to solve exactly this problem. Where not available, we continue
to use the old way, and are no worse off than before.
pselect(2) has been required by POSIX since about 2001, so most modern
platforms should have it. A bigger portability issue is that some
implementations are said to be non-atomic, ie pselect() isn't really
any different from unblock/select/reblock. Still, we're no worse off
than before on such a platform.
There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point this
could be reverted, since we'd be using a self-pipe to solve the race
condition. But that's not happening before v11 at the earliest.
Back-patch to 9.6. The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.
Discussion: https://postgr.es/m/9205.1492833041@sss.pgh.pa.us
poll.h is mandated by Single Unix Spec v2, the usual baseline for
postgres on unix. None of the unixoid buildfarms animals has
sys/poll.h but not poll.h. Therefore there's not much point to test
for sys/poll.h's existence and include it optionally.
Author: Andres Freund, per suggestion from Tom Lane
Discussion: https://postgr.es/m/20505.1492723662@sss.pgh.pa.us
All documentation is now built using XSLT. Remove all references to
Jade, DSSSL, also JadeTex and some other outdated tooling.
For chunked HTML builds, this changes nothing, but removes the
transitional "oldhtml" target. The single-page HTML build is ported
over to XSLT. For PDF builds, this removes the JadeTex builds and moves
the FOP builds in their place.
copyObject() is declared to return void *, which allows easily assigning
the result independent of the input, but it loses all type checking.
If the compiler supports typeof or something similar, cast the result to
the input type. This creates a greater amount of type safety. In some
cases, where the result is assigned to a generic type such as Node * or
Expr *, new casts are now necessary, but in general casts are now
unnecessary in the normal case and indicate that something unusual is
happening.
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Add a column collprovider to pg_collation that determines which library
provides the collation data. The existing choices are default and libc,
and this adds an icu choice, which uses the ICU4C library.
The pg_locale_t type is changed to a union that contains the
provider-specific locale handles. Users of locale information are
changed to look into that struct for the appropriate handle to use.
Also add a collversion column that records the version of the collation
when it is created, and check at run time whether it is still the same.
This detects potentially incompatible library upgrades that can corrupt
indexes and other structures. This is currently only supported by
ICU-provided collations.
initdb initializes the default collation set as before from the `locale
-a` output but also adds all available ICU locales with a "-x-icu"
appended.
Currently, ICU-provided collations can only be explicitly named
collations. The global database locales are still always libc-provided.
ICU support is enabled by configure --with-icu.
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
We had some AC_CHECK_HEADER tests that were really wastes of cycles,
because the code proceeded to #include those headers unconditionally
anyway, in all or a large majority of cases. The lack of complaints
shows that those headers are available on every platform of interest,
so we might as well let configure run a bit faster by not probing
those headers at all.
I suspect that some of the tests I left alone are equally useless, but
since all the existing #includes of the remaining headers are properly
guarded, I didn't touch them.
Per discussion, the time has come to do this. The handwriting has been
on the wall at least since 9.0 that this would happen someday, whenever
it got to be too much of a burden to support the float-timestamp option.
The triggering factor now is the discovery that there are multiple bugs
in the code that attempts to implement use of integer timestamps in the
replication protocol even when the server is built for float timestamps.
The internal float timestamps leak into the protocol fields in places.
While we could fix the identified bugs, there's a very high risk of
introducing more. Trying to build a wall that would positively prevent
mixing integer and float timestamps is more complexity than we want to
undertake to maintain a long-deprecated option. The fact that these
bugs weren't found through testing also indicates a lack of interest
in float timestamps.
This commit disables configure's --disable-integer-datetimes switch
(it'll still accept --enable-integer-datetimes, though), removes direct
references to USE_INTEGER_DATETIMES, and removes discussion of float
timestamps from the user documentation. A considerable amount of code is
rendered dead by this, but removing that will occur as separate mop-up.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
Commit 04aad4018 added this check after the search for a Python shared
library, which seems to me to be a pretty unfriendly ordering. The
search might fail for what are basically version-related reasons, and
in such a case it'd be better to say "your Python is too old" than
"could not find shared library for Python".
There is no specific reason for this right now, but keeping support for
old Python versions around indefinitely increases the maintenance
burden. The oldest supported Python version is now Python 2.4, which is
still shipped in RHEL/CentOS 5 by default.
In configure, add a check for the required Python version and give a
friendly error message for an old version, instead of relying on an
obscure build error later on.
The advantage of clock_gettime() is that the API allows the result to
be precise to nanoseconds, not just microseconds as in gettimeofday().
Now that it's routinely possible to do tens of plan node executions
in 1us, we really need more precision than gettimeofday() can offer
for EXPLAIN ANALYZE to accumulate statistics with.
Some research shows that clock_gettime() is available on pretty nearly
every modern Unix-ish platform, and as far as I have been able to test,
it has about the same execution time as gettimeofday(), so there's no
loss in switching over. (By the same token, this doesn't do anything
to fix the fact that we really wish clock readings were faster. But
there's enough win here to justify changing anyway.)
A small side benefit is that on most platforms, we can use CLOCK_MONOTONIC
instead of CLOCK_REALTIME and thereby render EXPLAIN impervious to
concurrent resets of the system clock. (This means that code must not
assume that the contents of struct instr_time have any well-defined
interpretation as timestamps, but really that was true before.)
Some platforms offer nonstandard clock IDs that might be of interest.
This patch knows we should use CLOCK_MONOTONIC_RAW on macOS, because it
provides more precision and is faster to read than their CLOCK_MONOTONIC.
If there turn out to be many more cases where we need special rules, it
might be appropriate to handle the selection of clock ID in configure,
but for the moment that doesn't seem worth the trouble.
Discussion: https://postgr.es/m/31856.1400021891@sss.pgh.pa.us
Thinko in ecb0d20a9 --- this needs to go one level further out in
the "if" nest. As it stood, nothing got printed in the case of
selecting named POSIX semaphores. Cosmetic issue only, but a bug.
This adds a new routine, pg_strong_random() for generating random bytes,
for use in both frontend and backend. At the moment, it's only used in
the backend, but the upcoming SCRAM authentication patches need strong
random numbers in libpq as well.
pg_strong_random() is based on, and replaces, the existing implementation
in pgcrypto. It can acquire strong random numbers from a number of sources,
depending on what's available:
- OpenSSL RAND_bytes(), if built with OpenSSL
- On Windows, the native cryptographic functions are used
- /dev/urandom
Unlike the current pgcrypto function, the source is chosen by configure.
That makes it easier to test different implementations, and ensures that
we don't accidentally fall back to a less secure implementation, if the
primary source fails. All of those methods are quite reliable, it would be
pretty surprising for them to fail, so we'd rather find out by failing
hard.
If no strong random source is available, we fall back to using erand48(),
seeded from current timestamp, like PostmasterRandom() was. That isn't
cryptographically secure, but allows us to still work on platforms that
don't have any of the above stronger sources. Because it's not very secure,
the built-in implementation is only used if explicitly requested with
--disable-strong-random.
This replaces the more complicated Fortuna algorithm we used to have in
pgcrypto, which is unfortunate, but all modern platforms have /dev/urandom,
so it doesn't seem worth the maintenance effort to keep that. pgcrypto
functions that require strong random numbers will be disabled with
--disable-strong-random.
Original patch by Magnus Hagander, tons of further work by Michael Paquier
and me.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRy3krN8quR9XujMVVHYtXJ0_60nqgVc6oUk8ygyVkZsA@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqRWkNYRRPJA7-cF+LfroYV10pvjdz6GNvxk-Eee9FypKA@mail.gmail.com
SCO OpenServer and SCO UnixWare are more or less dead platforms.
We have never had a buildfarm member testing the "sco" port, and
the last "unixware" member was last heard from in 2012, so it's
fair to doubt that the code even compiles anymore on either one.
Remove both ports. We can always undo this if someone shows up
with an interest in maintaining and testing these platforms.
Discussion: <17177.1476136994@sss.pgh.pa.us>
We've had support for using unnamed POSIX semaphores instead of System V
semaphores for quite some time, but it was not used by default on any
platform. Since many systems have rather small limits on the number of
SysV semaphores allowed, it seems desirable to switch to POSIX semaphores
where they're available and don't create performance or kernel resource
problems. Experimentation by me shows that unnamed POSIX semaphores
are at least as good as SysV semaphores on Linux, and we previously had
a report from Maksym Sobolyev that FreeBSD is significantly worse with
SysV semaphores than POSIX ones. So adjust those two platforms to use
unnamed POSIX semaphores, if configure can find the necessary library
functions. If this goes well, we may switch other platforms as well,
but it would be advisable to test them individually first.
It's not currently contemplated that we'd encourage users to select
a semaphore API for themselves, but anyone who wants to experiment
can add PREFERRED_SEMAPHORES=UNNAMED_POSIX (or NAMED_POSIX, or SYSV)
to their configure command line to do so.
I also tweaked configure to report which API it's selected, mainly
so that we can tell that from buildfarm reports.
I did not touch the user documentation's discussion about semaphores;
that will need some adjustment once the dust settles.
Discussion: <8536.1475704230@sss.pgh.pa.us>
Older versions of Python produce garbage (or at least useless) values of
get_config_vars('LDLIBRARY'). Newer versions produce garbage (or at least
useless) values of get_config_vars('SO'), which was defeating our configure
logic that attempted to identify where the Python shlib really is. The net
result, at least with a stock Python 3.5 installation on macOS, was that
we were linking against a static library in the mistaken belief that it was
a shared library. This managed to work, if you count statically absorbing
libpython into plpython.so as working. But it no longer works as of commit
d51924be8, because now we get separate static copies of libpython in
plpython.so and hstore_plpython.so, and those can't interoperate on the
same data. There are some other infelicities like assuming that nobody
ever installs a private version of Python on a macOS machine.
Hence, forget about looking in $python_configdir for the Python shlib;
as far as I can tell no version of Python has ever put one there, and
certainly no currently-supported version does. Also, rather than relying
on get_config_vars('SO'), just try all the possibilities for shlib
extensions. Also, rather than trusting Py_ENABLE_SHARED, believe we've
found a shlib only if it has a recognized extension. Last, explicitly
cope with the possibility that the shlib is really in /usr/lib and
$python_libdir is a red herring --- this is the actual situation on older
macOS, but we were only accidentally working with it.
Discussion: <5300.1475592228@sss.pgh.pa.us>
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
LibreSSL defines OPENSSL_VERSION_NUMBER to claim that it is version 2.0.0,
but it doesn't have the functions added in OpenSSL 1.1.0. Add autoconf
checks for the individual functions we need, and stop relying on
OPENSSL_VERSION_NUMBER.
Backport to 9.5 and 9.6, like the patch that broke this. In the
back-branches, there are still a few OPENSSL_VERSION_NUMBER checks left,
to check for OpenSSL 0.9.8 or 0.9.7. I left them as they were - LibreSSL
has all those functions, so they work as intended.
Per buildfarm member curculio.
Discussion: <2442.1473957669@sss.pgh.pa.us>
Changes needed to build at all:
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to all supported branches, per popular demand. In back-branches,
we still support OpenSSL 0.9.7 and above. OpenSSL 0.9.6 should still work
too, but I didn't test it. In master, we only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
Discussion: <20160627151604.GD1051@msg.df7cb.de>
This is a good bit more complicated than the average new-version stamping
commit, because it includes various adjustments in pursuit of changing
from three-part to two-part version numbers. It's likely some further
work will be needed around that change; but this is enough to get through
the regression tests, at least in Unix builds.
Peter Eisentraut and Tom Lane
Andres Freund