The alternative of disallowing index-only scans in HS operation was
discussed, but the consensus was that it was better to treat marking
a page all-visible as a recovery conflict for snapshots that could still
fail to see XIDs on that page. We may in the future try to soften this,
so that we simply force index scans to do heap fetches in cases where
this may be an issue, rather than throwing a hard conflict.
Comparing two xlog locations are useful for example when calculating
replication lag.
Euler Taveira de Oliveira, reviewed by Fujii Masao, and some cleanups
from me
Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.
Jun Ishizuka and Fujii Masao, with minor modifications
Removing this bit from xl_info allows us to restore the old limit of four
(not three) separate pages touched by a WAL record, which is needed for the
upcoming SP-GiST feature, and will likely be useful elsewhere in future.
When we implemented XLR_BKP_REMOVABLE in 2007, we had to do it like that
because no special WAL-visible action was taken when starting a backup.
However, now we force a segment switch when starting a backup, so a
compressing WAL archiver (such as pglesslog) that uses the state shown in
the current page header will not be fooled as to removability of backup
blocks. The only downside is that the archiver will not return to
compressing mode for up to one WAL page after the backup is over, which is
a small price to pay for getting back the extra xl_info bit. In any case
the archiver could look for XLOG_BACKUP_END records if it thought it was
worth the trouble to do so.
Bump XLOG_PAGE_MAGIC since this is effectively a change in WAL format.
bgwriter is now a much less important process, responsible for page
cleaning duties only. checkpointer is now responsible for checkpoints
and so has a key role in shutdown. Later patches will correct doc
references to the now old idea that bgwriter performs checkpoints.
Has beneficial effect on performance at high write rates, but mainly
refactoring to more easily allow changes for power reduction by
simplifying previously tortuous code around required to allow page
cleaning and checkpointing to time slice in the same process.
Patch by me, Review by Dickson Guedes
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
XLOG_XACT_COMMIT_COMPACT leaves out invalidation messages and relfilenodes,
saving considerable space for the vast majority of transaction commits.
XLOG_XACT_COMMIT keeps same definition as XLOG_PAGE_MAGIC 0xD067 and earlier.
Leonardo Francalanci and Simon Riggs
This involves two main changes from the previous behavior. First,
when we set a bit in the visibility map, emit a new WAL record of type
XLOG_HEAP2_VISIBLE. Replay sets the page-level PD_ALL_VISIBLE bit and
the visibility map bit. Second, when inserting, updating, or deleting
a tuple, we can no longer get away with clearing the visibility map
bit after releasing the lock on the corresponding heap page, because
an intervening crash might leave the visibility map bit set and the
page-level bit clear. Making this work requires a bit of interface
refactoring.
In passing, a few minor but related cleanups: change the test in
visibilitymap_set and visibilitymap_clear to throw an error if the
wrong page (or no page) is pinned, rather than silently doing nothing;
this case should never occur. Also, remove duplicate definitions of
InvalidXLogRecPtr.
Patch by me, review by Noah Misch.
ReadRecord's habit of using both direct references to tmpRecPtr and
references to *RecPtr (which is pointing at tmpRecPtr) triggers an
optimization bug in gcc 4.6.0, which apparently has forgotten about
aliasing rules. Avoid the compiler bug, and make the code more readable
to boot, by getting rid of the direct references. Improve the comments
while at it.
Back-patch to all supported versions, in case they get built with 4.6.0.
Tom Lane, with some cosmetic suggestions from Alex Hunsaker
new recovery.conf parameter recovery_target_name allows PITR to
specify named points as recovery targets.
Jaime Casanova, reviewed by Euler Taveira de Oliveira, plus minor edits
This allows us to reliably remove all leftover temporary relation
files on cluster startup without reference to system catalogs or WAL;
therefore, we no longer include temporary relations in XLOG_XACT_COMMIT
and XLOG_XACT_ABORT WAL records.
Since these changes require including a backend ID in each
SharedInvalSmgrMsg, the size of the SharedInvalidationMessage.id
field has been reduced from two bytes to one, and the maximum number
of connections has been reduced from INT_MAX / 4 to 2^23-1. It would
be possible to remove these restrictions by increasing the size of
SharedInvalidationMessage by 4 bytes, but right now that doesn't seem
like a good trade-off.
Review by Jaime Casanova and Tom Lane.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
after actually removing one, so that if we can't remove segments because
WAL archiving is lagging behind, we don't unnecessarily forbid streaming
the old not-yet-archived segments that are still perfectly valid. Per
suggestion from Fujii Masao.
WAL record for btree delete contains a list of tids, even when backup
blocks are present. We follow the tids to their heap tuples, taking
care to follow LP_REDIRECT tuples. We ignore LP_DEAD tuples on the
understanding that they will always have xmin/xmax earlier than any
LP_NORMAL tuples referred to by killed index tuples. Iff all tuples
are LP_DEAD we return InvalidTransactionId. The heap relfilenode is
added to the WAL record, requiring API changes to pass down the heap
Relation. XLOG_PAGE_MAGIC updated.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
of multiple forks, and each fork can be created and grown separately.
The bulk of this patch is about changing the smgr API to include an extra
ForkNumber argument in every smgr function. Also, smgrscheduleunlink and
smgrdounlink no longer implicitly call smgrclose, because other forks might
still exist after unlinking one. The callers of those functions have been
modified to call smgrclose instead.
This patch in itself doesn't have any user-visible effect, but provides the
infrastructure needed for upcoming patches. The additional forks envisioned
are a rewritten FSM implementation that doesn't rely on a fixed-size shared
memory block, and a visibility map to allow skipping portions of a table in
VACUUM that have no dead tuples.
data structures and backend internal APIs. This solves problems we've seen
recently with inconsistent layout of pg_control between machines that have
32-bit time_t and those that have already migrated to 64-bit time_t. Also,
we can get out from under the problem that Windows' Unix-API emulation is not
consistent about the width of time_t.
There are a few remaining places where local time_t variables are used to hold
the current or recent result of time(NULL). I didn't bother changing these
since they do not affect any cross-module APIs and surely all platforms will
have 64-bit time_t before overflow becomes an actual risk. time_t should
be avoided for anything visible to extension modules, however.
WAL records that shows whether it is safe to remove full-page images
(ie, whether or not an on-line backup was in progress when the WAL entry
was made). Also make provision for an XLOG_NOOP record type that can be
used to fill in the extra space when decompressing the data for restore.
This is the portion of Koichi Suzuki's "full page writes" patch that
has to go into the core database. The remainder of that work is two
external compression and decompression programs, which for the time being
will undergo separate development on pgfoundry. Per discussion.
Also, twiddle the handling of BTREE_SPLIT records to ensure it'll be
possible to compress them (the previous coding caused essential info
to be omitted). The other commonly-used record types seem OK already,
with the possible exception of GIN and GIST WAL records, which I don't
understand well enough to opine on.
from time_t to TimestampTz representation. This provides full gettimeofday()
resolution of the timestamps, which might be useful when attempting to
do point-in-time recovery --- previously it was not possible to specify
the stop point with sub-second resolution. But mostly this is to get
rid of TimestampTz-to-time_t conversion overhead during commit. Per my
proposal of a day or two back.
than N seconds apart. This allows a simple, if not very high performance,
means of guaranteeing that a PITR archive is no more than N seconds behind
real time. Also make pg_current_xlog_location return the WAL Write pointer,
add pg_current_xlog_insert_location to return the Insert pointer, and fix
pg_xlogfile_name_offset to return its results as a two-element record instead
of a smashed-together string, as per recent discussion.
Simon Riggs
operation every so often. This improves the usefulness of PITR log
shipping for hot standby: formerly, if the standby server crashed, it
was necessary to restart it from the last base backup and replay all
the WAL since then. Now it will only need to reread about the same
amount of WAL as the master server would. The behavior might also
come in handy during a long PITR replay sequence. Simon Riggs,
with some editorialization by Tom Lane.
to happen automatically during pg_stop_backup(). Add some functions for
interrogating the current xlog insertion point and for easily extracting
WAL filenames from the hex WAL locations displayed by pg_stop_backup
and friends. Simon Riggs with some editorialization by Tom Lane.
XLOG_BLCKSZ. This ought to help in preventing configuration mismatch
problems if anyone tries to ship PITR files between servers compiled
with different XLOG_BLCKSZ settings. Simon Riggs
used within WAL files. Historically this was the same as the data file
BLCKSZ, but there's no necessary connection, and it's possible that
performance gains might ensue from reducing XLOG_BLCKSZ. In any case
distinguishing two symbols should improve code clarity. This commit
does not actually change the page size, only provide the infrastructure
to make it possible to do so. initdb forced because of addition of a
field to pg_control.
Mark Wong, with some help from Simon Riggs and Tom Lane.
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
Instead of a separate CRC on each backup block, include backup blocks
in their parent WAL record's CRC; this is important to ensure that the
backup block really goes with the WAL record, ie there was not a page
tear right at the start of the backup block. Implement a simple form
of compression of backup blocks: drop any run of zeroes starting at
pd_lower, so as not to store the unused 'hole' that commonly exists in
PG heap and index pages. Tweak PageRepairFragmentation and related
routines to ensure they keep the unused space zeroed, so that the above
compression method remains effective. All per recent discussions.
a more tolerable limit on the number of subtransactions or deleted files
in COMMIT and ABORT records. Buy back the extra space by eliminating the
xl_xact_prev field, which isn't being used for anything and is rather
unlikely ever to be used for anything.
This does not force initdb, but you do need to do pg_resetxlog if you
want to upgrade an existing 8.0 installation without initdb.
Robert Haas