Change things around so that proper quoting of values interpolated into
the BKI data by initdb is the responsibility of initdb, not something
we half-heartedly handle by putting double quotes into the raw BKI data.
(Note: experimentation shows that it still doesn't work to put a double
quote into the initial superuser username, but that's the fault of
inadequate quoting while interpolating the name into SQL scripts;
the BKI aspect of it works fine now.)
Having done that, we can remove the special-case handling of values
that look like "something" from genbki.pl, and instead teach it to
escape double --- and single --- quotes properly. This removes the
nowhere-documented need to treat those specially in the BKI source
data; whatever you write will be passed through unchanged into the
inserted data value, modulo Perl's rules about single-quoted strings.
Add documentation explaining the (pre-existing) handling of backslashes
in the BKI data.
Per an earlier discussion with John Naylor.
Discussion: https://postgr.es/m/CAJVSVGUNao=-Q2-vAN3PYcdF5tnL5JAHwGwzZGuYHtq+Mk_9ng@mail.gmail.com
They were accidentally excluded when reverting the backend online
checksum functionality, and since they weren't built the incorrect
reference to a removed section also did not trigger a problem.
Author: Christoph Berg
Make it clear that a cluster has to be shut down cleanly before
pg_verify_checksum can be run against it.
Author: Michael Paquier
Review: Daniel Gustafsson
This option makes no sense when the cluster checksum state cannot be
changed, and should have been removed in the revert.
Author: Daniel Gustafsson
Review: Michael Paquier
This reverts commits d204ef6377,
83454e3c2b and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
In particular, the requirement to have SELECT privilege for the initial
table copy was previously not documented.
Author: Shinoda, Noriyoshi <noriyoshi.shinoda@hpe.com>
Commit 372728b0d created some problems for usages like building a
subdirectory without having first done "make all" at the top level,
or for proceeding directly to "make install" without "make all".
The only reasonably clean way to fix this seems to be to force the
submake-generated-headers rule to fire in *any* "make all" or "make
install" command anywhere in the tree. To avoid lots of redundant work,
as well as parallel make jobs possibly clobbering each others' output, we
still need to be sure that the rule fires only once in a recursive build.
For that, adopt the same MAKELEVEL hack previously used for "temp-install".
But try to document it a bit better.
The submake-errcodes mechanism previously used in src/port/ and src/common/
is subsumed by this, so we can get rid of those special cases. It was
inadequate for src/common/ anyway after the aforesaid commit, and it always
risked parallel attempts to build errcodes.h.
Discussion: https://postgr.es/m/E1f5FAB-0006LU-MB@gemulon.postgresql.org
In its original form, reformat_dat_file.pl smashed consecutive blank
lines to a single blank line, which was helpful for mopping up excess
whitespace during the bootstrap data format conversion. But going
forward, there seems little reason to do that; if developers want to
put in multiple blank lines, let 'em. This makes it conform to the
documentation I (tgl) wrote, too.
In passing, clean up some sloppy markup choices in bki.sgml.
John Naylor
Discussion: https://postgr.es/m/28827.1523039259@sss.pgh.pa.us
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Historically, the initial catalog data to be installed during bootstrap
has been written in DATA() lines in the catalog header files. This had
lots of disadvantages: the format was badly underdocumented, it was
very difficult to edit the data in any mechanized way, and due to the
lack of any abstraction the data was verbose, hard to read/understand,
and easy to get wrong.
Hence, move this data into separate ".dat" files and represent it in a way
that can easily be read and rewritten by Perl scripts. The new format is
essentially "key => value" for each column; while it's a bit repetitive,
explicit labeling of each value makes the data far more readable and less
error-prone. Provide a way to abbreviate entries by omitting field values
that match a specified default value for their column. This allows removal
of a large amount of repetitive boilerplate and also lowers the barrier to
adding new columns.
Also teach genbki.pl how to translate symbolic OID references into
numeric OIDs for more cases than just "regproc"-like pg_proc references.
It can now do that for regprocedure-like references (thus solving the
problem that regproc is ambiguous for overloaded functions), operators,
types, opfamilies, opclasses, and access methods. Use this to turn
nearly all OID cross-references in the initial data into symbolic form.
This represents a very large step forward in readability and error
resistance of the initial catalog data. It should also reduce the
difficulty of renumbering OID assignments in uncommitted patches.
Also, solve the longstanding problem that frontend code that would like to
use OID macros and other information from the catalog headers often had
difficulty with backend-only code in the headers. To do this, arrange for
all generated macros, plus such other declarations as we deem fit, to be
placed in "derived" header files that are safe for frontend inclusion.
(Once clients migrate to using these pg_*_d.h headers, it will be possible
to get rid of the pg_*_fn.h headers, which only exist to quarantine code
away from clients. That is left for follow-on patches, however.)
The now-automatically-generated macros include the Anum_xxx and Natts_xxx
constants that we used to have to update by hand when adding or removing
catalog columns.
Replace the former manual method of generating OID macros for pg_type
entries with an automatic method, ensuring that all built-in types have
OID macros. (But note that this patch does not change the way that
OID macros for pg_proc entries are built and used. It's not clear that
making that match the other catalogs would be worth extra code churn.)
Add SGML documentation explaining what the new data format is and how to
work with it.
Despite being a very large change in the catalog headers, there is no
catversion bump here, because postgres.bki and related output files
haven't changed at all.
John Naylor, based on ideas from various people; review and minor
additional coding by me; previous review by Alvaro Herrera
Discussion: https://postgr.es/m/CAJVSVGWO48JbbwXkJz_yBFyGYW-M9YWxnPdxJBUosDC9ou_F0Q@mail.gmail.com
This rectifies an oversight in commit 8224de4f4, by adding a new
property 'can_include' for pg_indexam_has_property, and adjusting the
results of pg_index_column_has_property to give more appropriate
results for INCLUDEd columns.
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Existing partition pruning is only able to work at plan time, for query
quals that appear in the parsed query. This is good but limiting, as
there can be parameters that appear later that can be usefully used to
further prune partitions.
This commit adds support for pruning subnodes of Append which cannot
possibly contain any matching tuples, during execution, by evaluating
Params to determine the minimum set of subnodes that can possibly match.
We support more than just simple Params in WHERE clauses. Support
additionally includes:
1. Parameterized Nested Loop Joins: The parameter from the outer side of the
join can be used to determine the minimum set of inner side partitions to
scan.
2. Initplans: Once an initplan has been executed we can then determine which
partitions match the value from the initplan.
Partition pruning is performed in two ways. When Params external to the plan
are found to match the partition key we attempt to prune away unneeded Append
subplans during the initialization of the executor. This allows us to bypass
the initialization of non-matching subplans meaning they won't appear in the
EXPLAIN or EXPLAIN ANALYZE output.
For parameters whose value is only known during the actual execution
then the pruning of these subplans must wait. Subplans which are
eliminated during this stage of pruning are still visible in the EXPLAIN
output. In order to determine if pruning has actually taken place, the
EXPLAIN ANALYZE must be viewed. If a certain Append subplan was never
executed due to the elimination of the partition then the execution
timing area will state "(never executed)". Whereas, if, for example in
the case of parameterized nested loops, the number of loops stated in
the EXPLAIN ANALYZE output for certain subplans may appear lower than
others due to the subplan having been scanned fewer times. This is due
to the list of matching subnodes having to be evaluated whenever a
parameter which was found to match the partition key changes.
This commit required some additional infrastructure that permits the
building of a data structure which is able to perform the translation of
the matching partition IDs, as returned by get_matching_partitions, into
the list index of a subpaths list, as exist in node types such as
Append, MergeAppend and ModifyTable. This allows us to translate a list
of clauses into a Bitmapset of all the subpath indexes which must be
included to satisfy the clause list.
Author: David Rowley, based on an earlier effort by Beena Emerson
Reviewers: Amit Langote, Robert Haas, Amul Sul, Rajkumar Raghuwanshi,
Jesper Pedersen
Discussion: https://postgr.es/m/CAOG9ApE16ac-_VVZVvv0gePSgkg_BwYEV1NBqZFqDR2bBE0X0A@mail.gmail.com
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Jsonb has a complex nature so there isn't best-for-everything way to convert it
to tsvector for full text search. Current to_tsvector(json(b)) suggests to
convert only string values, but it's possible to index keys, numerics and even
booleans value. To solve that json(b)_to_tsvector has a second required
argument contained a list of desired types of json fields. Second argument is
a jsonb scalar or array right now with possibility to add new options in a
future.
Bump catalog version
Author: Dmitry Dolgov with some editorization by me
Reviewed by: Teodor Sigaev
Discussion: https://www.postgresql.org/message-id/CA+q6zcXJQbS1b4kJ_HeAOoOc=unfnOrUEL=KGgE32QKDww7d8g@mail.gmail.com
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Also enable this for postgres_fdw.
Etsuro Fujita, based on an earlier patch by Amit Langote. The larger
patch series of which this is a part has been reviewed by Amit
Langote, David Fetter, Maksim Milyutin, Álvaro Herrera, Stephen Frost,
and me. Minor documentation changes to the final version by me.
Discussion: http://postgr.es/m/29906a26-da12-8c86-4fb9-d8f88442f2b9@lab.ntt.co.jp
This provides a newer version of adminpack which works with the newly
added default roles to support GRANT'ing to non-superusers access to
read and write files, along with related functions (unlinking files,
getting file length, renaming/removing files, scanning the log file
directory) which are supported through adminpack.
Note that new versions of the functions are required because an
environment might have an updated version of the library but still have
the old adminpack 1.0 catalog definitions (where EXECUTE is GRANT'd to
PUBLIC for the functions).
This patch also removes the long-deprecated alternative names for
functions that adminpack used to include and which are now included in
the backend, in adminpack v1.1. Applications using the deprecated names
should be updated to use the backend functions instead. Existing
installations which continue to use adminpack v1.0 should continue to
function until/unless adminpack is upgraded.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
This patch adds new default roles named 'pg_read_server_files',
'pg_write_server_files', 'pg_execute_server_program' which
allow an administrator to GRANT to a non-superuser role the ability to
access server-side files or run programs through PostgreSQL (as the user
the database is running as). Having one of these roles allows a
non-superuser to use server-side COPY to read, write, or with a program,
and to use file_fdw (if installed by a superuser and GRANT'd USAGE on
it) to read from files or run a program.
The existing misc file functions are also changed to allow a user with
the 'pg_read_server_files' default role to read any files on the
filesystem, matching the privileges given to that role through COPY and
file_fdw from above.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
Error-tolerant conversion function with web-like syntax for search query,
it simplifies constraining search engine with close to habitual interface for
users.
Bump catalog version
Authors: Victor Drobny, Dmitry Ivanov with editorization by me
Reviewed by: Aleksander Alekseev, Tomas Vondra, Thomas Munro, Aleksandr Parfenov
Discussion: https://www.postgresql.org/message-id/flat/fe931111ff7e9ad79196486ada79e268@postgrespro.ru
Vacuum of index consists from two stages: multiple (zero of more) ambulkdelete
calls and one amvacuumcleanup call. When workload on particular table
is append-only, then autovacuum isn't intended to touch this table. However,
user may run vacuum manually in order to fill visibility map and get benefits
of index-only scans. Then ambulkdelete wouldn't be called for indexes
of such table (because no heap tuples were deleted), only amvacuumcleanup would
be called In this case, amvacuumcleanup would perform full index scan for
two objectives: put recyclable pages into free space map and update index
statistics.
This patch allows btvacuumclanup to skip full index scan when two conditions
are satisfied: no pages are going to be put into free space map and index
statistics isn't stalled. In order to check first condition, we store
oldest btpo_xact in the meta-page. When it's precedes RecentGlobalXmin, then
there are some recyclable pages. In order to check second condition we store
number of heap tuples observed during previous full index scan by cleanup.
If fraction of newly inserted tuples is less than
vacuum_cleanup_index_scale_factor, then statistics isn't considered to be
stalled. vacuum_cleanup_index_scale_factor can be defined as both reloption and GUC (default).
This patch bumps B-tree meta-page version. Upgrade of meta-page is performed
"on the fly": during VACUUM meta-page is rewritten with new version. No special
handling in pg_upgrade is required.
Author: Masahiko Sawada, Alexander Korotkov
Review by: Peter Geoghegan, Kyotaro Horiguchi, Alexander Korotkov, Yura Sokolov
Discussion: https://www.postgresql.org/message-id/flat/CAD21AoAX+d2oD_nrd9O2YkpzHaFr=uQeGr9s1rKC3O4ENc568g@mail.gmail.com
The prefix operator along with SP-GiST indexes can be used as an alternative
for LIKE 'word%' commands and it doesn't have a limitation of string/prefix
length as B-Tree has.
Bump catalog version
Author: Ildus Kurbangaliev with some editorization by me
Review by: Arthur Zakirov, Alexander Korotkov, and me
Discussion: https://www.postgresql.org/message-id/flat/20180202180327.222b04b3@wp.localdomain
Add a new contrib module jsonb_plperl that provides a transform between
jsonb and PL/Perl. jsonb values are converted to appropriate Perl types
such as arrays and hashes, and vice versa.
Author: Anthony Bykov <a.bykov@postgrespro.ru>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Aleksander Alekseev <a.alekseev@postgrespro.ru>
Reviewed-by: Nikita Glukhov <n.gluhov@postgrespro.ru>
When base backups are run over the replication protocol (for example
using pg_basebackup), verify the checksums of all data blocks if
checksums are enabled. If checksum failures are encountered, log them
as warnings but don't abort the backup.
This becomes the default behaviour in pg_basebackup (provided checksums
are enabled on the server), so add a switch (-k) to disable the checks
if necessary.
Author: Michael Banck
Reviewed-By: Magnus Hagander, David Steele
Discussion: https://postgr.es/m/20180228180856.GE13784@nighthawk.caipicrew.dd-dns.de
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Teodor Sigaev