The intention in commit 491c029db was to require superuserness to
change the BYPASSRLS property, but the actual effect of the coding
in AlterRole() was to require superuserness to change anything at all
about a BYPASSRLS role. Other properties of a BYPASSRLS role should
be changeable under the same rules as for a normal role, though.
Fix that, and also take care of some documentation omissions related
to BYPASSRLS and REPLICATION role properties.
Tom Lane and Stephen Frost, per bug report from Wolfgang Walther.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/a5548a9f-89ee-3167-129d-162b5985fcf8@technowledgy.de
Remove old containment operators @ and ~ for built-in geometry data
types. These have been deprecated; use <@ and @> instead.
(Some contrib modules still contain the same deprecated operators.
That will be dealt with separately.)
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/flat/20201027032511.GF9241@telsasoft.com
sslinfo was passing the Port->ssl member directly to OpenSSL in order
to extract information regarding the connection. This breaks the API
provided by the backend TLS implementation, as well as duplicates code
for no benefit. Rewrite to make use of the backend API as much as
possible.
Author: Daniel Gustafsson <daniel@yesql.se>
Record the current version of dependent collations in pg_depend when
creating or rebuilding an index. When accessing the index later, warn
that the index may be corrupted if the current version doesn't match.
Thanks to Douglas Doole, Peter Eisentraut, Christoph Berg, Laurenz Albe,
Michael Paquier, Robert Haas, Tom Lane and others for very helpful
discussion.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> (earlier versions)
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
Provide a place for the version of referenced database objects to be
recorded. A follow-up commit will use this to record dependencies on
collation versions for indexes, but similar ideas for other kinds of
objects have also been mooted.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
This model couldn't be extended to cover the default collation, and
didn't have any information about the affected database objects when the
version changed. Remove, in preparation for a follow-up commit that
will add a new mechanism.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
This adds the statistics about transactions streamed to the decoding
output plugin from ReorderBuffer. Users can query the
pg_stat_replication_slots view to check these stats and call
pg_stat_reset_replication_slot to reset the stats of a particular slot.
Users can pass NULL in pg_stat_reset_replication_slot to reset stats of
all the slots.
Commit 9868167500 has added the basic infrastructure to capture the stats
of slot and this commit extends the statistics collector to track
additional information about slots.
Bump the catversion as we have added new columns in the catalog entry.
Author: Ajin Cherian and Amit Kapila
Reviewed-by: Sawada Masahiko and Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1+chpEomLzgSoky-D31qev19AmECNiEAietPQUGEFhtVA@mail.gmail.com
Commit f2b883969 did not get the memo about the new formatting
style for tables documenting built-in functions. I noticed because
of a PDF build warning about an overwidth table.
I started with the intention of just suppressing a PDF build warning
by removing the example output, but ended up doing more: correcting
factual errors in the function's signature, moving a bunch of
generalized handwaving into the "Using amcheck Effectively" section
which seemed a better place for it, and improving wording and markup
a little bit.
Discussion: https://postgr.es/m/732904.1603728748@sss.pgh.pa.us
This makes use of CheckBuffer() introduced in c780a7a, adding a SQL
wrapper able to do checks for all the pages of a relation. By default,
all the fork types of a relation are checked, and it is possible to
check only a given relation fork. Note that if the relation given in
input has no physical storage or is temporary, then no errors are
generated, allowing full-database checks when coupled with a simple scan
of pg_class for example. This is not limited to clusters with data
checksums enabled, as clusters without data checksums can still apply
checks on pages using the page headers or for the case of a page full of
zeros.
This function returns a set of tuples consisting of:
- The physical file where a broken page has been detected (without the
segment number as that can be AM-dependent, which can be guessed from
the block number for heap). A relative path from PGPATH is used.
- The block number of the broken page.
By default, only superusers have an access to this function but
execution rights can be granted to other users.
The feature introduced here is still minimal, and more improvements
could be done, like:
- Addition of a start and end block number to run checks on a range
of blocks, which would apply only if one fork type is checked.
- Addition of some progress reporting.
- Throttling, with configuration parameters in function input or
potentially some cost-based GUCs.
Regression tests are added for positive cases in the main regression
test suite, and TAP tests are added for cases involving the emulation of
page corruptions.
Bump catalog version.
Author: Julien Rouhaud, Michael Paquier
Reviewed-by: Masahiko Sawada, Justin Pryzby
Discussion: https://postgr.es/m/CAOBaU_aVvMjQn=ge5qPiJOPMmOj5=ii3st5Q0Y+WuLML5sR17w@mail.gmail.com
The restriction that only tables and views can be locked by LOCK TABLE
is quite arbitrary, since the underlying mechanism can lock any relation
type. Drop the restriction so that programs such as pg_dump can lock
all relations they're interested in, preventing schema changes that
could cause a dump to fail after expending much effort.
Backpatch to 9.5.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Wells Oliver <wells.oliver@gmail.com>
Discussion: https://postgr.es/m/20201021200659.GA32358@alvherre.pgsql
Instead of immediately PQfinish'ing a dead connection, save it aside
so that we can still extract its parameters for \connect attempts.
(This works because PQconninfo doesn't care whether the PGconn is in
CONNECTION_BAD state.) This allows developers to reconnect with
just \c after a database crash and restart.
It's tempting to use the same approach instead of closing the old
connection after a failed non-interactive \connect command. However,
that would not be very safe: consider a script containing
\c db1 user1 live_server
\c db2 user2 dead_server
\c db3
The script would be expecting to connect to db3 at dead_server, but
if we re-use parameters from the first connection then it might
successfully connect to db3 at live_server. This'd defeat the goal
of not letting a script accidentally execute commands against the
wrong database.
Discussion: https://postgr.es/m/38464.1603394584@sss.pgh.pa.us
The order of AuthenticationGSSContinue and AuthenticationSSPI was
swapped, based on the other Authentication* protocol messages being
listed in subcode order.
ECPG's PREPARE ... FROM and EXECUTE IMMEDIATE can optionally take
the target query as a simple literal, rather than the more usual
string-variable reference. This was previously documented as
being a C string literal, but that's a lie in one critical respect:
you can't write a data double quote as \" in such literals. That's
because the lexer is in SQL mode at this point, so it'll parse
double-quoted strings as SQL identifiers, within which backslash
is not special, so \" ends the literal.
I looked into making this work as documented, but getting the lexer
to switch behaviors at just the right point is somewhere between
very difficult and impossible. It's not really worth the trouble,
because these cases are next to useless: if you have a fixed SQL
statement to execute or prepare, you might as well write it as
a direct EXEC SQL, saving the messiness of converting it into
a string literal and gaining the opportunity for compile-time
SQL syntax checking.
Instead, let's just document (and test) the workaround of writing
a double quote as an octal escape (\042) in such cases.
There's no code behavioral change here, so in principle this could
be back-patched, but it's such a niche case I doubt it's worth
the trouble.
Per report from 1250kv.
Discussion: https://postgr.es/m/673825.1603223178@sss.pgh.pa.us
If you write the literal 'abc''def' in an EXEC SQL command, that will
come out the other end as 'abc'def', triggering a syntax error in the
backend. Likewise, "abc""def" is reduced to "abc"def" which is wrong
syntax for a quoted identifier.
The cause is that the lexer thinks it should emit just one quote
mark, whereas what it really should do is keep the string as-is.
Add some docs and test cases, too.
Although this seems clearly a bug, I fear users wouldn't appreciate
changing it in minor releases. Some may well be working around it
by applying an extra doubling of affected quotes, as for example
sql/dyntest.pgc has been doing.
Per investigation of a report from 1250kv, although this isn't
exactly what he/she was on about.
Discussion: https://postgr.es/m/673825.1603223178@sss.pgh.pa.us
The check for whether to complain about not having an old connection
to get parameters from was seriously out of date: it had not been
rethought when we invented connstrings, nor when we invented the
-reuse-previous option. Replace it with a check that throws an
error if reuse-previous is active and we lack an old connection to
reuse. While that doesn't move the goalposts very far in terms of
easing reconnection after a server crash, at least it's consistent.
If the user specifies a connstring plus additional parameters
(which is invalid per the documentation), the extra parameters were
silently ignored. That seems like it could be really confusing,
so let's throw a syntax error instead.
Teach the connstring code path to re-use the old connection's password
in the same cases as the old-style-syntax code path would, ie if we
are reusing parameters and the values of username, host/hostaddr, and
port are not being changed. Document this behavior, too, since it was
unmentioned before. Also simplify the implementation a bit, giving
rise to two new and useful properties: if there's a "password=xxx" in
the connstring, we'll use it not ignore it, and by default (i.e.,
except with --no-password) we will prompt for a password if the
re-used password or connstring password doesn't work. The previous
code just failed if the re-used password didn't work.
Given the paucity of field complaints about these issues, I don't
think that they rise to the level of back-patchable bug fixes,
and in any case they might represent undesirable behavior changes
in minor releases. So no back-patch.
Discussion: https://postgr.es/m/235210.1603321144@sss.pgh.pa.us
psql's \connect claims to be able to re-use previous connection
parameters, but in fact it only re-uses the database name, user name,
host name (and possibly hostaddr, depending on version), and port.
This is problematic for assorted use cases. Notably, pg_dump[all]
emits "\connect databasename" commands which we would like to have
re-use all other parameters. If such a script is loaded in a psql run
that initially had "-d connstring" with some non-default parameters,
those other parameters would be lost, potentially causing connection
failure. (Thus, this is the same kind of bug addressed in commits
a45bc8a4f and 8e5793ab6, although the details are much different.)
To fix, redesign do_connect() so that it pulls out all properties
of the old PGconn using PQconninfo(), and then replaces individual
properties in that array. In the case where we don't wish to re-use
anything, get libpq's default settings using PQconndefaults() and
replace entries in that, so that we don't need different code paths
for the two cases.
This does result in an additional behavioral change for cases where
the original connection parameters allowed multiple hosts, say
"psql -h host1,host2", and the \connect request allows re-use of the
host setting. Because the previous coding relied on PQhost(), it
would only permit reconnection to the same host originally selected.
Although one can think of scenarios where that's a good thing, there
are others where it is not. Moreover, that behavior doesn't seem to
meet the principle of least surprise, nor was it documented; nor is
it even clear it was intended, since that coding long pre-dates the
addition of multi-host support to libpq. Hence, this patch is content
to drop it and re-use the host list as given.
Per Peter Eisentraut's comments on bug #16604. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/16604-933f4b8791227b15@postgresql.org
Change the attribute 'name' to 'slot_name' in pg_stat_replication_slots
view to make it clear and that way we will be consistent with the other
places like pg_stat_wal_receiver view where we display the same attribute.
In the passing, fix the typo in one of the macros in the related code.
Bump the catversion as we have modified the name in the catalog as well.
Reported-by: Noriyoshi Shinoda
Author: Noriyoshi Shinoda
Reviewed-by: Sawada Masahiko and Amit Kapila
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
When told to process all databases, clusterdb, reindexdb, and vacuumdb
would reconnect by replacing their --maintenance-db parameter with the
name of the target database. If that parameter is a connstring (which
has been allowed for a long time, though we failed to document that
before this patch), we'd lose any other options it might specify, for
example SSL or GSS parameters, possibly resulting in failure to connect.
Thus, this is the same bug as commit a45bc8a4f fixed in pg_dump and
pg_restore. We can fix it in the same way, by using libpq's rules for
handling multiple "dbname" parameters to add the target database name
separately. I chose to apply the same refactoring approach as in that
patch, with a struct to handle the command line parameters that need to
be passed through to connectDatabase. (Maybe someday we can unify the
very similar functions here and in pg_dump/pg_restore.)
Per Peter Eisentraut's comments on bug #16604. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/16604-933f4b8791227b15@postgresql.org
- Misc grammar and punctuation fixes.
- Stylistic cleanup: use spaces between function arguments and JSON fields
in examples. For example "foo(a,b)" -> "foo(a, b)". Add semicolon after
last END in a few PL/pgSQL examples that were missing them.
- Make sentence that talked about "..." and ".." operators more clear,
by avoiding to end the sentence with "..". That makes it look the same
as "..."
- Fix syntax description for HAVING: HAVING conditions cannot be repeated
Patch by Justin Pryzby, per Yaroslav Schekin's report. Backpatch to all
supported versions, to the extent that the patch applies easily.
Discussion: https://www.postgresql.org/message-id/20201005191922.GE17626%40telsasoft.com
The rules to choose the number of parallel workers to perform parallel
vacuum operation were not clearly specified.
Reported-by: Peter Eisentraut
Author: Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/36aa8aea-61b7-eb3c-263b-648e0cb117b7@2ndquadrant.com
The Windows documentation insists that every WSAStartup call should
have a matching WSACleanup call. However, if that ever had actual
relevance, it wasn't in this century. Every remotely-modern Windows
kernel is capable of cleaning up when a process exits without doing
that, and must be so to avoid resource leaks in case of a process
crash. Moreover, Postgres backends have done WSAStartup without
WSACleanup since commit 4cdf51e64 in 2004, and we've never seen any
indication of a problem with that.
libpq's habit of doing WSAStartup during connection start and
WSACleanup during shutdown is also rather inefficient, since a
series of non-overlapping connection requests leads to repeated,
quite expensive DLL unload/reload cycles. We document a workaround
for that (having the application call WSAStartup for itself), but
that's just a kluge. It's also worth noting that it's far from
uncommon for applications to exit without doing PQfinish, and
we've not heard reports of trouble from that either.
However, the real reason for acting on this is that recent
experiments by Alexander Lakhin suggest that calling WSACleanup
during PQfinish might be triggering the symptom we occasionally see
that a process using libpq fails to emit expected stdio output.
Therefore, let's change libpq so that it calls WSAStartup only
once per process, during the first connection attempt, and never
calls WSACleanup at all.
While at it, get rid of the only other WSACleanup call in our code
tree, in pg_dump/parallel.c; that presumably is equally useless.
If this proves to suppress the fairly-common ecpg test failures
we see on Windows, I'll back-patch, but for now let's just do it
in HEAD and see what happens.
Discussion: https://postgr.es/m/ac976d8c-03df-d6b8-025c-15a2de8d9af1@postgrespro.ru
Section 8.5.1.4, which defines these literals, made only a vague
reference to the fact that they might be evaluated too soon to be
safe in non-interactive contexts. Provide a more explicit caution
against misuse. Also, generalize the wording in the related tip in
section 9.9.4: while it clearly described this problem, it implied
(or really, stated outright) that the problem only applies to table
DEFAULT clauses.
Per gripe from Tijs van Dam. Back-patch to all supported branches.
Discussion: https://postgr.es/m/c2LuRv9BiRT3bqIo5mMQiVraEXey_25B4vUn0kDqVqilwOEu_iVF1tbtvLnyQK7yDG3PFaz_GxLLPil2SDkj1MCObNRVaac-7j1dVdFERk8=@thalex.com
Commit a97e85f2b caused "exceed the available area" warnings in PDF
builds. Fine-tune colwidth values to avoid that.
Back-patch to 9.6, like the prior patch. (This is of dubious value
before v13, since we were far from free of such warnings in older
branches. But we might as well keep the SGML looking the same in all
branches.)
Per buildfarm.
Previously it was documented that toast_tuple_target affected column
marked as only External or Extended. But this description is not correct
and toast_tuple_target affects also column marked as Main.
Back-patch to v11 where toast_tuple_target reloption was introduced.
Author: Shinya Okano
Reviewed-by: Tatsuhito Kasahara, Fujii Masao
Discussion: https://postgr.es/m/93f46e311a67422e89e770d236059817@oss.nttdata.com
I removed the duplicate command tags for START_REPLICATION inadvertently
in commit 07082b08cc, but the replication protocol requires them. The
fact that the replication protocol was broken was not noticed because
all our test cases use an optimized code path that exits early, failing
to verify that the behavior is correct for non-optimized cases. Put
them back.
Also document this protocol quirk.
Add a test case that shows the failure. It might still succeed even
without the patch when run on a fast enough server, but it suffices to
show the bug in enough cases that it would be noticed in buildfarm.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Henry Hinze <henry.hinze@gmail.com>
Reviewed-by: Petr Jelínek <petr.jelinek@2ndquadrant.com>
Discussion: https://postgr.es/m/16643-eaadeb2a1a58d28c@postgresql.org
FDWs that can perform an UPDATE/DELETE remotely using the "direct modify"
set of APIs need to access the ResultRelInfo of the target table. That's
currently available in EState.es_result_relation_info, but the next
commit will remove that field.
This commit adds a new resultRelation field in ForeignScan, to store the
target relation's RT index, and the corresponding ResultRelInfo in
ForeignScanState. The FDW's PlanDirectModify callback is expected to set
'resultRelation' along with 'operation'. The core code doesn't need them
for anything, they are for the convenience of FDW's Begin- and
IterateDirectModify callbacks.
Authors: Amit Langote, Etsuro Fujita
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqGEmiib8FLiHMhKB%2BCH5dRgHSLc5N5wnvc4kym%2BZYpQEQ%40mail.gmail.com
Commit 16fa9b2b3 broke the ability to reliably test GiST buffered builds,
because it caused sorted builds to be done instead if sortsupport is
available, regardless of any attempt to override that. While a would-be
test case could try to work around that by choosing an opclass that has
no sortsupport function, coverage would be silently lost the moment
someone decides it'd be a good idea to add a sortsupport function.
Hence, rearrange the logic in gistbuild() so that if "buffering = on"
is specified in CREATE INDEX, we will use that method, sortsupport or no.
Also document the interaction between sorting and the buffering
parameter, as 16fa9b2b3 failed to do.
(Note that in fact we still lack any test coverage of buffered builds,
but this is a prerequisite to adding a non-fragile test.)
Discussion: https://postgr.es/m/3249980.1602532990@sss.pgh.pa.us
Michael Paquier