This hasn't been correct since 9.3 added "latex-longtable".
I left the phraseology "Unique abbreviations are allowed" alone.
It's correct as far as it goes, and we are studiously refraining
from specifying exactly what happens if you give a non-unique
abbreviation. (The answer in the back branches is "you get a
backwards-compatible choice", and the answer in HEAD will shortly
be "you get an error", but there seems no need to mention such
details here.)
Daniel Vérité
Discussion: https://postgr.es/m/cb7e1caf-3ea6-450d-af28-f524903a030c@manitou-mail.org
This commit fixes a set of issues with ON COMMIT actions when used on
partitioned tables and tables with inheritance children:
- Applying ON COMMIT DROP on a partitioned table with partitions or on a
table with inheritance children caused a failure at commit time, with
complains about the children being already dropped as all relations are
dropped one at the same time.
- Applying ON COMMIT DELETE on a partition relying on a partitioned
table which uses ON COMMIT DROP would cause the partition truncation to
fail as the parent is removed first.
The solution to the first problem is to handle the removal of all the
dependencies in one go instead of dropping relations one-by-one, based
on a suggestion from Álvaro Herrera. So instead all the relation OIDs
to remove are gathered and then processed in one round of multiple
deletions.
The solution to the second problem is to reorder the actions, with
truncation happening first and relation drop done after. Even if it
means that a partition could be first truncated, then immediately
dropped if its partitioned table is dropped, this has the merit to keep
the code simple as there is no need to do existence checks on the
relations to drop.
Contrary to a manual TRUNCATE on a partitioned table, ON COMMIT DELETE
does not cascade to its partitions. The ON COMMIT action defined on
each partition gets the priority.
Author: Michael Paquier
Reviewed-by: Amit Langote, Álvaro Herrera, Robert Haas
Discussion: https://postgr.es/m/68f17907-ec98-1192-f99f-8011400517f5@lab.ntt.co.jp
Backpatch-through: 10
Previously it was possible to set client_min_messages to FATAL or PANIC,
which had the effect of suppressing transmission of regular ERROR messages
to the client. Perhaps that seemed like a useful option in the past, but
the trouble with it is that it breaks guarantees that are explicitly made
in our FE/BE protocol spec about how a query cycle can end. While libpq
and psql manage to cope with the omission, that's mostly because they
are not very bright; client libraries that have more semantic knowledge
are likely to get confused. Notably, pgODBC doesn't behave very sanely.
Let's fix this by getting rid of the ability to set client_min_messages
above ERROR.
In HEAD, just remove the FATAL and PANIC options from the set of allowed
enum values for client_min_messages. (This change also affects
trace_recovery_messages, but that's OK since these aren't useful values
for that variable either.)
In the back branches, there was concern that rejecting these values might
break applications that are explicitly setting things that way. I'm
pretty skeptical of that argument, but accommodate it by accepting these
values and then internally setting the variable to ERROR anyway.
In all branches, this allows a couple of tiny simplifications in the
logic in elog.c, so do that.
Also respond to the point that was made that client_min_messages has
exactly nothing to do with the server's logging behavior, and therefore
does not belong in the "When To Log" subsection of the documentation.
The "Statement Behavior" subsection is a better match, so move it there.
Jonah Harris and Tom Lane
Discussion: https://postgr.es/m/7809.1541521180@sss.pgh.pa.us
Discussion: https://postgr.es/m/15479-ef0f4cc2fd995ca2@postgresql.org
The code added by commit c203d6cf8 causes a crash in at least one case,
where a potentially-optimizable expression index has a storage type
different from the input data type. A cursory code review turned up
numerous other problems that seem impractical to fix on short notice.
Andres argued for revert of that patch some time ago, and if additional
senior committers had been paying attention, that's likely what would
have happened, but we were not :-(
At this point we can't just revert, at least not in v11, because that would
mean an ABI break for code touching relcache entries. And we should not
remove the (also buggy) support for the recheck_on_update index reloption,
since it might already be used in some databases in the field. So this
patch just does the as-little-invasive-as-possible measure of disabling
the feature as though recheck_on_update were forced off for all indexes.
I also removed the related regression tests (which would otherwise fail)
and the user-facing documentation of the reloption.
We should undertake a more thorough code cleanup if the patch can't be
fixed, but not under the extreme time pressure of being already overdue
for 11.1 release.
Per report from Ondřej Bouda and subsequent private discussion among
pgsql-release.
Discussion: https://postgr.es/m/20181106185255.776mstcyehnc63ty@alvherre.pgsql
I removed the item about the pg_stat_statements change from
release-11.sgml, as part of a sweep to delete items already committed
in 11.0; but actually we'd best keep it to ensure that people who've
pg_upgraded their databases will take the requisite action. Also make
said action more visible by making it into its own para. Noted by
Jonathan Katz.
exec_stmt_call() tried to extract information out of a CALL statement's
argument list without using expand_function_arguments(), apparently in
the hope of saving a few nanoseconds by not processing defaulted
arguments. It got that quite wrong though, leading to crashes with
named arguments, as well as failure to enforce writability of the
argument for a defaulted INOUT parameter. Fix and simplify the logic
by using expand_function_arguments() before examining the list.
Also, move the argument-examination to just after producing the CALL
command's plan, before invoking the called procedure. This ensures
that we'll track possible changes in the procedure's argument list
correctly, and avoids a hazard of the plan cache being flushed while
the procedure executes.
Also fix assorted falsehoods and omissions in associated documentation.
Per bug #15477 from Alexey Stepanov.
Patch by me, with some help from Pavel Stehule. Back-patch to v11.
Discussion: https://postgr.es/m/15477-86075b1d1d319e0a@postgresql.org
Discussion: https://postgr.es/m/CAFj8pRA6UsujpTs9Sdwmk-R6yQykPx46wgjj+YZ7zxm4onrDyw@mail.gmail.com
The solution arrived at in commit e74dd00f5 presumes that the compiler
has a suitable default -isysroot setting ... but further experience
shows that in many combinations of macOS version, XCode version, Xcode
command line tools version, and phase of the moon, Apple's compiler
will *not* supply a default -isysroot value.
We could potentially go back to the approach used in commit 68fc227dd,
but I don't have a lot of faith in the reliability or life expectancy of
that either. Let's just revert to the approach already shipped in 11.0,
namely specifying an -isysroot switch globally. As a partial response to
the concerns raised by Jakob Egger, adjust the contents of Makefile.global
to look like
CPPFLAGS = -isysroot $(PG_SYSROOT) ...
PG_SYSROOT = /path/to/sysroot
This allows overriding the sysroot path at build time in a relatively
painless way.
Add documentation to installation.sgml about how to use the PG_SYSROOT
option. I also took the opportunity to document how to work around
macOS's "System Integrity Protection" feature.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/20840.1537850987@sss.pgh.pa.us
spgendscan neglected to pfree all the memory allocated by spgbeginscan.
It's possible to get away with that in most normal queries, since the
memory is allocated in the executor's per-query context which is about
to get deleted anyway; but it causes severe memory leakage during
creation or filling of large exclusion-constraint indexes.
Also, document that amendscan is supposed to free what ambeginscan
allocates. The docs' lack of clarity on that point probably caused this
bug to begin with. (There is discussion of changing that API spec going
forward, but I don't think it'd be appropriate for the back branches.)
Per report from Bruno Wolff. It's been like this since the beginning,
so back-patch to all active branches.
In HEAD, also fix an independent leak caused by commit 2a6368343
(allocating memory during spgrescan instead of spgbeginscan, which
might be all right if it got cleaned up, but it didn't). And do a bit
of code beautification on that commit, too.
Discussion: https://postgr.es/m/20181024012314.GA27428@wolff.to
PQnotifies() is defined to just process already-read data, not try to read
any more from the socket. (This is a debatable decision, perhaps, but I'm
hesitant to change longstanding library behavior.) The documentation has
long recommended calling PQconsumeInput() before PQnotifies() to ensure
that any already-arrived message would get absorbed and processed.
However, psql did not get that memo, which explains why it's not very
reliable about reporting notifications promptly.
Also, most (not quite all) callers called PQconsumeInput() just once before
a PQnotifies() loop. Taking this recommendation seriously implies that we
should do PQconsumeInput() before each call. This is more important now
that we have "payload" strings in notification messages than it was before;
that increases the probability of having more than one packet's worth
of notify messages. Hence, adjust code as well as documentation examples
to do it like that.
Back-patch to 9.5 to match related server fixes. In principle we could
probably go back further with these changes, but given lack of field
complaints I doubt it's worthwhile.
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
With the PostgreSQL 11 release notes acknowledgments list, FOP reported
WARNING: Glyph "?" (0x144, nacute) not available in font "Times-Roman".
WARNING: Glyph "?" (0x15e, Scedilla) not available in font "Times-Roman".
WARNING: Glyph "?" (0x15f, scedilla) not available in font "Times-Roman".
WARNING: Glyph "?" (0x131, dotlessi) not available in font "Times-Roman".
This is because we have some new contributors whose names use letters
that we haven't used before, and apparently FOP can't handle them out
of the box.
For now, just fix this by "unaccenting" those names. In the future,
maybe this can be fixed better with a different font configuration.
There is also another warning
WARNING: Glyph "?" (0x3c0, pi) not available in font "Times-Roman".
but that existed in previous releases and is not touched here.
Set the release date. Do a bunch of copy-editing and markup improvement,
rearrange some stuff into what seemed a more sensible order, move some
things that did not seem to be in the right section.
Historically we forbade datatype-specific comparison functions from
returning INT_MIN, so that it would be safe to invert the sort order
just by negating the comparison result. However, this was never
really safe for comparison functions that directly return the result
of memcmp(), strcmp(), etc, as POSIX doesn't place any such restriction
on those library functions. Buildfarm results show that at least on
recent Linux on s390x, memcmp() actually does return INT_MIN sometimes,
causing sort failures.
The agreed-on answer is to remove this restriction and fix relevant
call sites to not make such an assumption; code such as "res = -res"
should be replaced by "INVERT_COMPARE_RESULT(res)". The same is needed
in a few places that just directly negated the result of memcmp or
strcmp.
To help find places having this problem, I've also added a compile option
to nbtcompare.c that causes some of the commonly used comparators to
return INT_MIN/INT_MAX instead of their usual -1/+1. It'd likely be
a good idea to have at least one buildfarm member running with
"-DSTRESS_SORT_INT_MIN". That's far from a complete test of course,
but it should help to prevent fresh introductions of such bugs.
This is a longstanding portability hazard, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/20180928185215.ffoq2xrq5d3pafna@alap3.anarazel.de
I (Andres) was more than a bit hasty in committing 33001fd7a7
after last minute changes, leading to a number of problems (jit output
was only shown for JIT in parallel workers, and just EXPLAIN without
ANALYZE didn't work). Lukas luckily found these issues quickly.
Instead of combining instrumentation in in standard_ExecutorEnd(), do
so on demand in the new ExplainPrintJITSummary().
Also update a documentation example of the JIT output, changed in
52050ad8eb.
Author: Lukas Fittl, with minor changes by me
Discussion: https://postgr.es/m/CAP53PkxmgJht69pabxBXJBM+0oc6kf3KHMborLP7H2ouJ0CCtQ@mail.gmail.com
Backpatch: 11, where JIT compilation was introduced
Per discussion, JIT isn't quite mature enough to ship enabled-by-default.
I failed to resist the temptation to do a bunch of copy-editing on the
related documentation. Also, clean up some inconsistencies in which
section of config.sgml the JIT GUCs are documented in vs. what guc.c
and postgresql.config.sample had.
Discussion: https://postgr.es/m/20180914222657.mw25esrzbcnu6qlu@alap3.anarazel.de
Commit be54b3777 failed on gmake 3.80 due to a chained conditional,
which on closer examination could be removed entirely with some
refactoring elsewhere for a net simplification and more robustness
against empty expansions. Along the way, add some more comments.
Also make explicit in the documentation and comments that built
headers are not removed by 'make clean', since we don't typically want
that for headers generated by a separate ./configure step, and it's
much easier to add your own 'distclean' rule or use EXTRA_CLEAN than
to try and override a deletion rule in pgxs.mk.
Per buildfarm member prariedog and comments by Michael Paquier, though
all the actual changes are my fault.
Since the fixes for CVE-2018-1058, we've advised people to schema-qualify
function references in order to fix failures in code that executes under
a minimal search_path setting. However, that's insufficient to make the
single-argument form of unaccent() work, because it looks up the "unaccent"
text search dictionary using the search path.
The most expedient answer seems to be to remove the search_path dependency
by making it look in the same schema that the unaccent() function itself
is declared in. This will definitely work for the normal usage of this
function with the unaccent dictionary provided by the extension.
It's barely possible that there are people who were relying on the
search-path-dependent behavior to select other dictionaries with the same
name; but if there are any such people at all, they can still get that
behavior by writing unaccent('unaccent', ...), or possibly
unaccent('unaccent'::text::regdictionary, ...) if the lookup has to be
postponed to runtime.
Per complaint from Gunnlaugur Thor Briem. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CAPs+M8LCex6d=DeneofdsoJVijaG59m9V0ggbb3pOH7hZO4+cQ@mail.gmail.com
Commit df163230b overlooked the case that an out-of-tree extension
might need to build its header files (e.g. via ./configure). If it is
also doing a VPATH build, the HEADERS_* rules in the original commit
would then fail to find the files, since they would be looking only
under $(srcdir) and not in the build directory.
Fix by adding HEADERS_built and HEADERS_built_$(MODULE) which behave
like DATA_built in that they look in the build dir rather than the
source dir (and also make the files dependencies of the "all" target).
No Windows support appears to be needed for this, since it is only
relevant to out-of-tree builds (no support exists in Mkvcbuild.pm to
build extension header files in any case).
pg_get_object_address and pg_identify_object_as_address are supposed
to be inverses, but they disagreed as to the names of the arguments
representing the textual form of an object address. Moreover, the
documented argument names didn't agree with reality at all, either
for these functions or pg_identify_object.
In HEAD and v11, I think we can get away with renaming the input
arguments of pg_get_object_address to match the outputs of
pg_identify_object_as_address. In theory that might break queries
using named-argument notation to call pg_get_object_address, but
it seems really unlikely that anybody is doing that, or that they'd
have much trouble adjusting if they were. In older branches, we'll
just live with the lack of consistency.
Aside from fixing the documentation of these functions to match reality,
I couldn't resist the temptation to do some copy-editing.
Per complaint from Jean-Pierre Pelletier. Back-patch to 9.5 where these
functions were introduced. (Before v11, this is a documentation change
only.)
Discussion: https://postgr.es/m/CANGqjDnWH8wsTY_GzDUxbt4i=y-85SJreZin4Hm8uOqv1vzRQA@mail.gmail.com
Amit Kapila