* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
any other client connections that may exist (which would only happen if
another client is currently in the authentication cycle). This avoids
wastage of open descriptors in a child. It might also explain peculiar
behaviors like not closing connections when expected, since the kernel
will probably not signal EOF as long as some other backend is randomly
holding open a reference to the connection, even if the client went away
long since ...
actually) to ensure that its file access time doesn't get old enough to
tempt a /tmp directory cleaner to remove it. Still another reason we
should never have put the sockets in /tmp in the first place ...
observed by Inoue. Also, don't call ProcRemove() from postmaster if we
have detected a backend crash --- too risky if shared memory is corrupted.
It's not needed anyway, considering we are going to reinitialize shared
memory and semaphores as soon as the last child is dead.
>> xlog.c : special case for beos to avoid 'link' which does not work yet
>> beos/sem.c : implementation of new sem_ctl call (GETPID) and a new
>sem_op
>> flag (IPCNOWAIT)
>> dynloader/beos.c : add a verification of symbol validity (seem that
the
>> loader sometime return OK with an invalid symbol)
>> postmaster.c : add beos forking support for the new checkpoint
process
>> postgres.c : remove beos special case for getrusage
>> beos.h : Correction of a bas definition of AF_UNIX, misc defnitions
>>
>>
>> thanks
>>
>>
>> cyril
Cyril VELTER
might change it. Experimentation shows that the signal handler call
mechanism does not save/restore errno for you, at least not on Linux
or HPUX, so this is definitely a real risk.
postmaster, because it isn't updated after forking away from the terminal.
Apparently it's not used anyplace in the postmaster ... but seems best
to make it show the correct PID ...
socket file, in favor of having an ordinary lockfile beside the socket file.
Clean up a few robustness problems in the lockfile code. If postmaster is
going to reject a connection request based on database state, it will now
tell you so before authentication exchange not after. (Of course, a failure
after is still possible if conditions change meanwhile, but this makes life
easier for a yet-to-be-written pg_ping utility.)
IPC key assignment will now work correctly even when multiple postmasters
are using same logical port number (which is possible given -k switch).
There is only one shared-mem segment per postmaster now, not 3.
Rip out broken code for non-TAS case in bufmgr and xlog, substitute a
complete S_LOCK emulation using semaphores in spin.c. TAS and non-TAS
logic is now exactly the same.
When deadlock is detected, "Deadlock detected" is now the elog(ERROR)
message, rather than a NOTICE that comes out before an unhelpful ERROR.
re-adopt these settings at every postmaster or standalone-backend startup.
This should fix problems with indexes becoming corrupt due to failure to
provide consistent locale environment for postmaster at all times. Also,
refuse to start up a non-locale-enabled compilation in a database originally
initdb'd with a non-C locale. Suppress LIKE index optimization if locale
is not "C" or "POSIX" (are there any other locales where it's safe?).
Issue NOTICE during initdb if selected locale disables LIKE optimization.
cloned, rather than always cloning template1. Modify initdb to generate
two identical databases rather than one, template0 and template1.
Connections to template0 are disallowed, so that it will always remain
in its virgin as-initdb'd state. pg_dumpall now dumps databases with
restore commands that say CREATE DATABASE foo WITH TEMPLATE = template0.
This allows proper behavior when there is user-added data in template1.
initdb forced!
hosting product, on both shared and dedicated machines. We currently
offer Oracle and MySQL, and it would be a nice middle-ground.
However, as shipped, PostgreSQL lacks the following features we need
that MySQL has:
1. The ability to listen only on a particular IP address. Each
hosting customer has their own IP address, on which all of their
servers (http, ftp, real media, etc.) run.
2. The ability to place the Unix-domain socket in a mode 700 directory.
This allows us to automatically create an empty database, with an
empty DBA password, for new or upgrading customers without having
to interactively set a DBA password and communicate it to (or from)
the customer. This in turn cuts down our install and upgrade times.
3. The ability to connect to the Unix-domain socket from within a
change-rooted environment. We run CGI programs chrooted to the
user's home directory, which is another reason why we need to be
able to specify where the Unix-domain socket is, instead of /tmp.
4. The ability to, if run as root, open a pid file in /var/run as
root, and then setuid to the desired user. (mysqld -u can almost
do this; I had to patch it, too).
The patch below fixes problem 1-3. I plan to address #4, also, but
haven't done so yet. These diffs are big enough that they should give
the PG development team something to think about in the meantime :-)
Also, I'm about to leave for 2 weeks' vacation, so I thought I'd get
out what I have, which works (for the problems it tackles), now.
With these changes, we can set up and run PostgreSQL with scripts the
same way we can with apache or proftpd or mysql.
In summary, this patch makes the following enhancements:
1. Adds an environment variable PGUNIXSOCKET, analogous to MYSQL_UNIX_PORT,
and command line options -k --unix-socket to the relevant programs.
2. Adds a -h option to postmaster to set the hostname or IP address to
listen on instead of the default INADDR_ANY.
3. Extends some library interfaces to support the above.
4. Fixes a few memory leaks in PQconnectdb().
The default behavior is unchanged from stock 7.0.2; if you don't use
any of these new features, they don't change the operation.
David J. MacKenzie
that search loops only have to scan that far and not through all maxBackends
entries. This eliminates a performance penalty for setting maxBackends
much higher than the average number of active backends. Also, eliminate
no-longer-used 'backend tag' concept. Remove setting of environment
variables at backend start (except for CYR_RECODE), since none of them
are being examined by the backend any longer.
working on the VERY latest version of BeOS. I'm sure there will be
alot of comments, but then if there weren't I'd be disappointed!
Thanks for your continuing efforts to get this into your tree.
Haven't bothered with the new files as they haven't changed.
BTW Peter, the compiler is "broken" about the bool define and so on.
I'm filing a bug report to try and get it addressed. Hopefully then we
can tidy up the code a bit.
I await the replies with interest :)
David Reid
user is now defined in terms of the user id, the user name is only computed
upon request (for display purposes). This is kind of the opposite of the
previous state, which would maintain the user name and compute the user id
for permission checks.
Besides perhaps saving a few cycles (integer vs string), this now creates a
single point of attack for changing the user id during a connection, for
purposes of "setuid" functions, etc.
Bruce Momjian