The xl_heap_header_len structures in an XLOG_HEAP_UPDATE record aren't
necessarily aligned adequately. The regular replay function for these
records is aware of that, but decode.c didn't get the memo. I'm not
sure why the buildfarm failed to catch this; the test_decoding test
certainly blows up real good on my old HPPA box.
Also, I'm pretty sure that the address arithmetic was wrong for the
case of XLOG_HEAP_CONTAINS_OLD and not XLOG_HEAP_CONTAINS_NEW_TUPLE,
though this apparently can't happen when logical decoding is active.
transam/README explained how B-tree incomplete splits were tracked and
fixed after recovery, as an example of handling complex actions that need
multiple WAL records, but that's not how it works anymore. Explain the new
paradigm.
Several years ago we changed chr(int) so that if the database encoding is
UTF8, it would interpret its argument as a Unicode code point and expand it
into the appropriate multibyte sequence. However, we weren't sufficiently
careful about checking validity of the input. According to RFC3629, UTF8
disallows code points above U+10FFFF (note that the predecessor standard
RFC2279 was more liberal). Also, both versions of the UTF8 spec agree
that Unicode surrogate-pair codes should never appear in UTF8. Because
our encoding validity checks follow RFC3629, our failure to enforce these
restrictions in chr() means it could be used to produce text strings that
will be rejected when the database is dumped and reloaded. To ensure
consistency with the input functions, let's actually apply
pg_utf8_islegal() to the proposed output of chr().
Per discussion, this seems like too much of a behavioral change to
back-patch, but it's not too late to squeeze it into 9.4.
gbt_macad_union also allocated 12-byte structs where we really need 16.
Per report from Andres Freund. No back-patch since there's no current
risk of a real problem.
The macaddr opclass stores two macaddr structs (each of size 6) in an
index column that's declared as being of type gbtreekey16, ie 16 bytes.
In the original coding this led to passing a palloc'd value of size 12
to the index insertion code, so that data would be fetched past the
end of the allocated value during index tuple construction. This makes
valgrind unhappy. In principle it could result in a SIGSEGV, though
with the current implementation of palloc there's no risk since
the 12-byte request size would be rounded up to 16 bytes anyway.
To fix, add a field to struct gbtree_ninfo showing the declared size of
the index datums, and use that in the palloc requests; and use palloc0
to be sure that any wasted bytes are cleanly initialized.
Per report from Andres Freund. No back-patch since there's no current
risk of a real problem.
pg_stat_replication shows connected replication clients. The ddl test case
never has any replication clients connected, so querying pg_stat_replication
is pointless. To check that a slot has been dropped correctly, query
pg_replication_slots instead.
Andres Freund
The decoding of prepared transaction commits accidentally used the XID of
the transaction performing the COMMIT PREPARED, not the XID of the prepared
transaction. Before bb38fb0d43 that lead to those transactions not being
decoded, afterwards to a assertion failure.
Let's complain about e.g an invalid path or permission problem sooner rather
than later. Before this patch, we would only try to open the output file
after receiving the first decoded message from the server.
Commit dd428c79 added dbId and tsId to the xl_xact_commit struct but missed
that prepared transaction commits reuse that struct. Fix that.
Because those fields were left unitialized, replaying a commit prepared WAL
record in a hot standby node would fail to remove the relcache init file.
That can lead to "could not open file" errors on the standby. Relcache init
file only needs to be removed when a system table/index is rewritten in the
transaction using two phase commit, so that should be rare in practice. In
HEAD, the incorrect dbId/tsId values are also used for filtering in logical
replication code, causing the transaction to always be filtered out.
Analysis and fix by Andres Freund. Backpatch to 9.0 where hot standby was
introduced.
In yesterday's commit 2dc4f011fd, I tried
to force buffering of stdout/stderr in initdb to be what it is by
default when the program is run interactively on Unix (since that's how
most manual testing is done). This tripped over the fact that Windows
doesn't support _IOLBF mode. We dealt with that a long time ago in
syslogger.c by falling back to unbuffered mode on Windows. Export that
solution in port.h and use it in initdb.
Back-patch to 8.4, like the previous commit.
Don't close stdout on SIGHUP. Also, when a SIGHUP is received, close the
file immediately, rather than only after receiving some more data from
the server. Rename a variable, to avoid mentally dealing with double
negatives (not unsynced means synced).
The proc array can contain duplicate XIDs, when a transaction is just being
prepared for two-phase commit. To cope, remove any duplicates in
txid_current_snapshot(). Also ignore duplicates in the input functions, so
that if e.g. you have an old pg_dump file that already contains duplicates,
it will be accepted.
Report and fix by Jan Wieck. Backpatch to all supported versions.
To lock a prepared transaction's shared memory entry, we used to mark it
with the XID of the backend. When the XID was no longer active according
to the proc array, the entry was implicitly considered as not locked
anymore. However, when preparing a transaction, the backend's proc array
entry was cleared before transfering the locks (and some other state) to
the prepared transaction's dummy PGPROC entry, so there was a window where
another backend could finish the transaction before it was in fact fully
prepared.
To fix, rewrite the locking mechanism of global transaction entries. Instead
of an XID, just have simple locked-or-not flag in each entry (we store the
locking backend's backend id rather than a simple boolean, but that's just
for debugging purposes). The backend is responsible for explicitly unlocking
the entry, and to make sure that that happens, install a callback to unlock
it on abort or process exit.
Backpatch to all supported versions.
Since this program may print to either stdout or stderr, the relative
ordering of its messages depends on the buffering behavior of those files.
Force stdout to be line-buffered and stderr to be unbuffered, ensuring
that the behavior will match standard Unix interactive behavior, even
when stdout and stderr are rerouted to a file.
Per complaint from Tomas Vondra. The particular case he pointed out is
new in HEAD, but issues of the same sort could arise in any branch with
other error messages, so back-patch to all branches.
I'm unsure whether we might not want to do this in other client programs
as well. For the moment, just fix initdb.
rd_replidindex should be managed the same as rd_oidindex, and rd_keyattr
and rd_idattr should be managed like rd_indexattr. Omissions in this area
meant that the bitmapsets computed for rd_keyattr and rd_idattr would be
leaked during any relcache flush, resulting in a slow but permanent leak in
CacheMemoryContext. There was also a tiny probability of relcache entry
corruption if we ran out of memory at just the wrong point in
RelationGetIndexAttrBitmap. Otherwise, the fields were not zeroed where
expected, which would not bother the code any AFAICS but could greatly
confuse anyone examining the relcache entry while debugging.
Also, create an API function RelationGetReplicaIndex rather than letting
non-relcache code be intimate with the mechanisms underlying caching of
that value (we won't even mention the memory leak there).
Also, fix a relcache flush hazard identified by Andres Freund:
RelationGetIndexAttrBitmap must not assume that rd_replidindex stays valid
across index_open.
The aspects of this involving rd_keyattr date back to 9.3, so back-patch
those changes.
Historically we've printed a complaint for a bad locale setting, but then
fallen back to the environment default. Per discussion, this is not such
a great idea, because rectifying an erroneous locale choice post-initdb
(perhaps long after data has been loaded) could be enormously expensive.
Better to complain and give the user a chance to double-check things.
The behavior was particularly bad if the bad setting came from environment
variables rather than a bogus command-line switch: in that case not only
was there a fallback to C/SQL_ASCII, but the printed complaint was quite
unhelpful. It's hard to be entirely sure what variables setlocale looked
at, but we can at least give a hint where the problem might be.
Per a complaint from Tomas Vondra.
When cache invalidations arrive while ri_LoadConstraintInfo() is busy
filling a new cache entry, InvalidateConstraintCacheCallBack() compares
the - not yet initialized - oidHashValue field with the to-be-invalidated
hash value. To fix, check whether the entry is already marked as invalid.
Andres Freund
The code expands a varbit gist leaf key to a node key by copying the bit
data twice in a varlen datum, as both the lower and upper key. The lower key
was expanded to INTALIGN size, but the padding bytes were not initialized.
That's a problem because when the lower/upper keys are compared, the padding
bytes are used compared too, when the values are otherwise equal. That could
lead to incorrect query results.
REINDEX is advised for any btree_gist indexes on bit or bit varying data
type, to fix any garbage padding bytes on disk.
Per Valgrind, reported by Andres Freund. Backpatch to all supported
versions.
America/Metlakatla hasn't been in the IANA database all that long, so
some installations might not have it. It does seem worthwhile to test
with a fractional-minute GMT offset, but we can get that from almost
any pre-1900 date; I chose Europe/Paris, whose LMT offset from Greenwich
should be pretty darn well established.
Also, assuming that Mars/Mons_Olympus will never be in the IANA database
seems less than future-proof, so let's use a more fanciful location for
the bad-zone-name check.
Per complaint from Christoph Berg.
config.pl and buildenv.pl can be used to customize build settings when
using MSVC. They should never get committed into the common source tree.
Back-patch to 9.0; it looks like the rules were different in 8.4.
Michael Paquier
The leak is fairly small and rare, but a leak nevertheless.
Per Coverity report. Backpatch to 9.2, where pg_receivexlog was added.
pg_basebackup shares the code, but it always exits on error, so there is
no real leak.
The original coding for ALTER SYSTEM made a fundamentally bogus assumption
that postgresql.auto.conf could be sought relative to the main config file
if we hadn't yet determined the value of data_directory. This fails for
common arrangements with the config file elsewhere, as reported by
Christoph Berg.
The simplest fix is to not try to read postgresql.auto.conf until after
SelectConfigFiles has chosen (and locked down) the data_directory setting.
Because of the logic in ProcessConfigFile for handling resetting of GUCs
that've been removed from the config file, we cannot easily read the main
and auto config files separately; so this patch adopts a brute force
approach of reading the main config file twice during postmaster startup.
That's a tad ugly, but the actual time cost is likely to be negligible,
and there's no time for a more invasive redesign before beta.
With this patch, any attempt to set data_directory via ALTER SYSTEM
will be silently ignored. It would probably be better to throw an
error, but that can be dealt with later. This bug, however, would
prevent any testing of ALTER SYSTEM by a significant fraction of the
userbase, so it seems important to get it fixed before beta.
There's no longer much pressure to switch the default GIN opclass for
jsonb, but there was still some unhappiness with the name "jsonb_hash_ops",
since hashing is no longer a distinguishing property of that opclass,
and anyway it seems like a relatively minor detail. At the suggestion of
Heikki Linnakangas, we'll use "jsonb_path_ops" instead; that captures the
important characteristic that each index entry depends on the entire path
from the document root to the indexed value.
Also add a user-facing explanation of the implementation properties of
these two opclasses.
Per discussion, this seems like a more consistent choice of name.
Fabrízio de Royes Mello, after a suggestion by Peter Eisentraut;
some additional documentation wordsmithing by me
Document existence operator adequately; fix obsolete claim that no
Unicode-escape semantic checks happen on input (it's still true for
json, but not for jsonb); improve examples; assorted wordsmithing.
When returning rows from a bitmap, as done with partial match queries, we
would get stuck in an infinite loop if the bitmap contained a lossy page
reference.
This bug is new in master, it was introduced by the patch to allow skipping
items refuted by other entries in GIN scans.
Report and fix by Alexander Korotkov
Usually the search would find plain "tclsh" without any trouble,
but some installations might only have the version-numbered flavor
of that program.
No compatibility problems have been reported with 8.6, so we might
as well back-patch this to all active branches.
Christoph Berg
Tom Lane