When pg_upgrade can't find required pg_controldata information, report
_which_ cluster is failing, with this message:
The %s cluster lacks some required control information:
When we eliminated "unnecessary" wakeups of the syslogger process, we
broke size-based logfile rotation on Windows, because on that platform
data transfer is done in a separate thread. While non-Windows platforms
would recheck the output file size after every log message, Windows only
did so when the control thread woke up for some other reason, which might
be quite infrequent. Per bug #7814 from Tsunezumi. Back-patch to 9.2
where the problem was introduced.
Jeff Janes
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
When a standby server follows the master using WAL archive, and it chooses
a new timeline (recovery_target_timeline='latest'), it only fetches the
timeline history file for the chosen target timeline, not any other history
files that might be missing from pg_xlog. For example, if the current
timeline is 2, and we choose 4 as the new recovery target timeline, the
history file for timeline 3 is not fetched, even if it's part of this
server's history. That's enough for the standby itself - the history file
for timeline 4 includes timeline 3 as well - but if a cascading standby
server wants to recover to timeline 3, it needs the history file. To fix,
when a new recovery target timeline is chosen, try to copy any missing
history files from the archive to pg_xlog between the old and new target
timeline.
A second similar issue was with the WAL files. When a standby recovers from
archive, and it reaches a segment that contains a switch to a new timeline,
recovery fetches only the WAL file labelled with the new timeline's ID. The
file from the new timeline contains a copy of the WAL from the old timeline
up to the point where the switch happened, and recovery recovers it from the
new file. But in streaming replication, walsender only tries to read it
from the old timeline's file. To fix, change walsender to read it from the
new file, so that it behaves the same as recovery in that sense, and doesn't
try to open the possibly nonexistent file with the old timeline's ID.
With AtEOXact applied, --single-transaction makes pg_restore slower, and
has the potential to require lock table configuration, so remove the
argument.
Per suggestion from Tom.
Originally we didn't bother to mark FuncExprs with any indication whether
VARIADIC had been given in the source text, because there didn't seem to be
any need for it at runtime. However, because we cannot fold a VARIADIC ANY
function's arguments into an array (since they're not necessarily all the
same type), we do actually need that information at runtime if VARIADIC ANY
functions are to respond unsurprisingly to use of the VARIADIC keyword.
Add the missing field, and also fix ruleutils.c so that VARIADIC ANY
function calls are dumped properly.
Extracted from a larger patch that also fixes concat() and format() (the
only two extant VARIADIC ANY functions) to behave properly when VARIADIC is
specified. This portion seems appropriate to review and commit separately.
Pavel Stehule
Remove duplicate implementations of catalog munging and miscellaneous
privilege checks. Instead rely on already existing data in
objectaddress.c to do the work.
Author: KaiGai Kohei, changes by me
Reviewed by: Robert Haas, Álvaro Herrera, Dimitri Fontaine
This bug goes back to the original Postgres95 sources. Its significance
to modern PG versions is marginal, since we have not used PQprintTuples()
internally in a very long time, and it doesn't seem to have ever been
documented either. Still, it *is* exposed to client apps, so somebody
out there might possibly be using it.
Xi Wang
AtEOXact_RelationCache() scanned the entire relation cache at the end of
any transaction that created a new relation or assigned a new relfilenode.
Thus, clients such as pg_restore had an O(N^2) performance problem that
would start to be noticeable after creating 10000 or so tables. Since
typically only a small number of relcache entries need any cleanup, we
can fix this by keeping a small list of their OIDs and doing hash_searches
for them. We fall back to the full-table scan if the list overflows.
Ideally, the maximum list length would be set at the point where N
hash_searches would cost just less than the full-table scan. Some quick
experimentation says that point might be around 50-100; I (tgl)
conservatively set MAX_EOXACT_LIST = 32. For the case that we're worried
about here, which is short single-statement transactions, it's unlikely
there would ever be more than about a dozen list entries anyway; so it's
probably not worth being too tense about the value.
We could avoid the hash_searches by instead keeping the target relcache
entries linked into a list, but that would be noticeably more complicated
and bug-prone because of the need to maintain such a list in the face of
relcache entry drops. Since a relcache entry can only need such cleanup
after a somewhat-heavyweight filesystem operation, trying to save a
hash_search per cleanup doesn't seem very useful anyway --- it's the scan
over all the not-needing-cleanup entries that we wish to avoid here.
Jeff Janes, reviewed and tweaked a bit by Tom Lane
This currently does little except serve as documentation. (The one case
where it has a performance benefit, SERIALIZABLE mode in 9.1 and up, was
already using READ ONLY mode.) However, it's possible that it might have
performance benefits in future, and in any case it seems like good
practice since it would catch any accidentally non-read-only operations.
Pavan Deolasee
Un-double the backslashes in the LIKE patterns, since
standard_conforming_strings is now the default. Just to be sure, include
a command to set standard_conforming_strings to ON in the example.
Back-patch to 9.1, where standard_conforming_strings became the default.
Josh Kupershmidt, reviewed by Jeff Janes
Complaint and patch from Zoltán Böszörményi.
When cross-compiling, the native make doesn't know
about the Windows .exe suffix, so it only builds with
it when explicitly told to do so.
The native make will not see the link between the target
name and the built executable, and might this do unnecesary
work, but that's a bigger problem than this one, if in fact
we consider it a problem at all.
Back-patch to all live branches.
Use of SnapshotNow is known to expose us to race conditions if the tuple(s)
being sought could be updated by concurrently-committing transactions.
CREATE DATABASE and DROP DATABASE are particularly exposed because they do
heavyweight filesystem operations during their scans of pg_tablespace,
so that the scans run for a very long time compared to most. Furthermore,
the potential consequences of a missed or twice-visited row are nastier
than average:
* createdb() could fail with a bogus "file already exists" error, or
silently fail to copy one or more tablespace's worth of files into the
new database.
* remove_dbtablespaces() could miss one or more tablespaces, thus failing
to free filesystem space for the dropped database.
* check_db_file_conflict() could likewise miss a tablespace, leading to an
OID conflict that could result in data loss either immediately or in
future operations. (This seems of very low probability, though, since a
duplicate database OID would be unlikely to start with.)
Hence, it seems worth fixing these three places to use MVCC snapshots, even
though this will someday be superseded by a generic solution to SnapshotNow
race conditions.
Back-patch to all active branches.
Stephen Frost and Tom Lane
This got broken in the original fast-path locking patch, because
I failed to account for the fact that Hot Standby startup process
might take a strong relation lock on a relation in a database to
which it is not bound, and confused MyDatabaseId with the database
ID of the relation being locked.
Report and diagnosis by Andres Freund. Final form of patch by me.
Remove extra line at bottom of table for new 'latex' mode border=3.
Also update 'latex'-longtable 'tableattr' docs to say
'whitespace-separated' instead of 'space'.
of timeline, take advantage of that in walreceiver.
Startup process is still in control of choosign the target timeline, by
scanning the timeline history files present in pg_xlog, but walreceiver now
uses the next timeline's ID to fetch its history file immediately after it
has finished streaming the old timeline. Before, the standby would first try
to restart streaming on the old timeline, which fetches the missing timeline
history file as a side-effect, and only then restart from the new timeline.
This patch eliminates the extra iteration, which speeds up the timeline
switch and reduces the noise in the log caused by the extra restart on the
old timeline.
The xlogreader refactoring broke the logic to decide which timeline to start
streaming from. XLogPageRead() uses the timeline history to check which
timeline the requested WAL position falls into. However, after the
refactoring, XLogPageRead() is always first called with the first page in
the segment, to verify the segment header, and only then with the actual WAL
position we're interested in. That first read of the segment's header made
XLogPageRead() to always start streaming from the old timeline containing
the segment header, not the timeline containing the actual record, if there
was a timeline switch within the segment.
I thought I fixed this yesterday, but that fix was too narrow and only fixed
this for the corner-case that the timeline switch happened in the first page
of the segment. To fix this more robustly, pass explicitly the position of
the record we're actually interested in to XLogPageRead, and use that to
decide which timeline to read from, rather than deduce it from the page and
offset.
Per report from Fujii Masao.
get a large enough part of the page to include the beginning of the next
record we're interested in. The XLogPageRead callback uses the requested
length to decide which timeline to stream WAL from, and if the first call
is short, and the page contains a timeline switch, we'll repeatedly try
to stream that page from the old timeline, and never get across the
timeline switch.
The patch to allow pg_receivexlog to switch timeline added a result set
after copy has ended in START_STREAMING command, to return the next
timeline's ID to the client. But walreceived didn't get the memo, and threw
an error on the unexpected result set. Fix.
When relations are dropped, at end of transaction we need to remove the
files and clean the buffer pool of buffers containing pages of those
relations. Previously we would scan the buffer pool once per relation
to clean up buffers. When there are many relations to drop, the
repeated scans make this process slow; so we now instead pass a list of
relations to drop and scan the pool once, checking each buffer against
the passed list. When the number of relations is larger than a
threshold (which as of this patch is being set to 20 relations) we sort
the array before starting, and bsearch the array; when it's smaller, we
simply scan the array linearly each time, because that's faster. The
exact optimal threshold value depends on many factors, but the
difference is not likely to be significant enough to justify making it
user-settable.
This has been measured to be a significant win (a 15x win when dropping
100,000 relations; an extreme case, but reportedly a real one).
Author: Tomas Vondra, some tweaks by me
Reviewed by: Robert Haas, Shigeru Hanada, Andres Freund, Álvaro Herrera
This mirrors the changes done earlier to the server in standby mode. When
receivelog reaches the end of a timeline, as reported by the server, it
fetches the timeline history file of the next timeline, and restarts
streaming from the new timeline by issuing a new START_STREAMING command.
When pg_receivexlog crosses a timeline, it leaves the .partial suffix on the
last segment on the old timeline. This helps you to tell apart a partial
segment left in the directory because of a timeline switch, and a completed
segment. If you just follow a single server, it won't make a difference, but
it can be significant in more complicated scenarios where new WAL is still
generated on the old timeline.
This includes two small changes to the streaming replication protocol:
First, when you reach the end of timeline while streaming, the server now
sends the TLI of the next timeline in the server's history to the client.
pg_receivexlog uses that as the next timeline, so that it doesn't need to
parse the timeline history file like a standby server does. Second, when
BASE_BACKUP command sends the begin and end WAL positions, it now also sends
the timeline IDs corresponding the positions.
The code originally just doubled the size of the tuple-pointer array so
long as that would fit in allowedMem. This could result in failing to use
as much as half of allowedMem, if (as is typical) the last doubling attempt
didn't quite fit. Worse, we might double the array size but be unable to
use most of the added slots, because there was no room left within the
allowedMem limit for tuples the slots should point to. To fix, double only
so long as we've used less than half of allowedMem in total. Then do one
more array enlargement, but scale it based on total memory consumption so
far. This will work nicely as long as the average tuple size is reasonably
stable, and in any case should be better than the old method.
This change will result in large sort operations consuming a larger
fraction of work_mem than they typically did in the past. The release
notes should mention that users may want to revisit their work_mem
settings, if they'd tuned those settings based on the old behavior of
sorting.
Jeff Janes, reviewed by Peter Geoghegan and Robert Haas
XLogReadRecord should reset its state on every error, to make sure it
re-reads the page on next call. It was inconsistent in that some errors did
that, but some did not.
In ReadRecord(), don't give up on an error if we're in standby mode. The
loop was set up to retry, but the checks within the loop broke out of the
loop on any error.
Andres Freund, with some tweaking by me.
The patch that turned XLogRecPtr into a uint64 inadvertently changed the
on-disk format of GiST indexes, because the NSN field in the GiST page
opaque is an XLogRecPtr. That breaks pg_upgrade. Revert the format of that
field back to the two-field struct that XLogRecPtr was before. This is the
same we did to LSNs in the page header to avoid changing on-disk format.
Bump catversion, as this invalidates any existing GiST indexes built on
9.3devel.
It's better to start from what the OpenSSL people consider a good
default and then remove insecure things (low encryption, exportable
encryption and md5 at this point) from that, instead of starting
from everything that exists and remove from that. We trust the
OpenSSL people to make good choices about what the default is.
When truncating at the end, like before, the output would often end up
just showing the path instead of the filename.
Also increase the length of the filename by 5, which still keeps us at
less than 80 characters in most outputs.
Bruce Momjian