A previous commit added inline functions that provide fast(er) and
correct overflow checks for signed integer math. Use them in a
significant portion of backend code. There's more to touch in both
backend and frontend code, but these were the easily identifiable
cases.
The old overflow checks are noticeable in integer heavy workloads.
A secondary benefit is that getting rid of overflow checks that rely
on signed integer overflow wrapping around, will allow us to get rid
of -fwrapv in the future. Which in turn slows down other code.
Author: Andres Freund
Discussion: https://postgr.es/m/20171024103954.ztmatprlglz3rwke@alap3.anarazel.de
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
This avoids additional translatable strings for each distinct type, as
well as making our quoting style around type names more consistent
(namely, that we don't quote type names). This continues what started
as f402b99501.
Discussion: https://postgr.es/m/20160401170642.GA57509@alvherre.pgsql
In 83ff1618 we defined integer limits iff they're not provided by the
system. That turns out not to be the greatest idea because there's
different ways some datatypes can be represented. E.g. on OSX PG's 64bit
datatype will be a 'long int', but OSX unconditionally uses 'long
long'. That disparity then can lead to warnings, e.g. around printf
formats.
One way to fix that would be to back int64 using stdint.h's
int64_t. While a good idea it's not that easy to implement. We would
e.g. need to include stdint.h in our external headers, which we don't
today. Also computing the correct int64 printf formats in that case is
nontrivial.
Instead simply prefix the integer limits with PG_ and define them
unconditionally. I've adjusted all the references to them in code, but
not the ones in comments; the latter seems unnecessary to me.
Discussion: 20150331141423.GK4878@alap3.anarazel.de
Several submitted and even committed patches have run into the problem
that C89, our baseline, does not provide minimum/maximum values for
various integer datatypes. C99's stdint.h does, but we can't rely on
it.
Several parts of the code defined limits locally, so instead centralize
the definitions to c.h.
This patch also changes the more obvious usages of literal limit values;
there's more places that could be changed, but it's less clear whether
it's beneficial to change those.
Author: Andrew Gierth
Discussion: 87619tc5wc.fsf@news-spur.riddles.org.uk
First installment of the promised moving-aggregate support in built-in
aggregates: count(), sum(), avg(), stddev() and variance() for
assorted datatypes, though not for float4/float8.
In passing, remove a 2001-vintage kluge in interval_accum(): interval
array elements have been properly aligned since around 2003, but
nobody remembered to take out this workaround. Also, fix a thinko
in the opr_sanity tests for moving-aggregate catalog entries.
David Rowley and Florian Pflug, reviewed by Dean Rasheed
Some platforms throw an exception for this division, rather than returning
a necessarily-overflowed result. Since we were testing for overflow after
the fact, an exception isn't nice. We can avoid the problem by treating
division by -1 as negation.
Add some regression tests so that we'll find out if any compilers try to
optimize away the overflow check conditions.
This ought to be back-patched, but I'm going to see what the buildfarm
reports about the regression tests first.
Per discussion with Xi Wang, though this is different from the patch he
submitted.
The correct answer for this (or any other case with arg2 = -1) is zero,
but some machines throw a floating-point exception instead of behaving
sanely. Commit f9ac414c35 dealt with this
in int4mod, but overlooked the fact that it also happens in int8mod
(at least on my Linux x86_64 machine). Protect int2mod as well; it's
not clear whether any machines fail there (mine does not) but since the
test is so cheap it seems better safe than sorry. While at it, simplify
the original guard in int4mod: we need only check for arg2 == -1, we
don't need to check arg1 explicitly.
Xi Wang, with some editing by me.
The previous code went into an infinite loop after overflow. In fact,
an overflow is not really an error; it just means that the current
value is the last one we need to return. So, just arrange to stop
immediately when overflow is detected.
Back-patch all the way.
Add dummy returns before every potential division-by-zero in int8.c,
because apparently further "improvements" in gcc's optimizer have
enabled it to break functions that weren't broken before.
Aurelien Jarno, via Martin Pitt
A hand-coded implementation turns out to be much faster than calling
printf(). In passing, add a few more regresion tests.
Andres Freund, with assorted, mostly cosmetic changes.
being called as aggregates, and to get the aggregate transition state memory
context if needed. Use it instead of poking directly into AggState and
WindowAggState in places that shouldn't know so much.
We should have done this in 8.4, probably, but better late than never.
Revised version of a patch by Hitoshi Harada.
we're not going to support that anymore.
I did keep the 64-bit-CRC-with-32-bit-arithmetic code, since it has a
performance excuse to live. It's a bit moot since that's all ifdef'd
out, of course.
to occur for division by zero, even though the code is carefully avoiding
that. All available evidence is that the only functions affected are
int24div, int48div, and int28div, so patch just those three functions to
include a "return" after the ereport() call.
Backpatch to 8.4 so that the fix can be tested in production builds.
For older branches our recommendation will continue to be to use -O1
on affected platforms (which are mostly non-mainstream anyway).
machine produces zero (rather than the more usual minimum-possible-integer)
for the only possible overflow case. This has been seen to occur for at least
some word widths on some hardware, and it's cheap enough to check for
everywhere. Per Peter's analysis of buildfarm reports.
This could be back-patched, but in the absence of any gripes from the field
I doubt it's worth the trouble.
int2-and-int8 implementations of the basic arithmetic operators +, -, *, /.
This doesn't really add any new functionality, but it avoids "operator is not
unique" failures that formerly occurred in these cases because the parser
couldn't decide whether to promote the int2 to int4 or int8. We could
alternatively have removed the existing cross-type operators, but
experimentation shows that the cost of an additional type coercion expression
node is noticeable compared to such cheap operators; so let's not give up any
performance here. On the other hand, I removed the int2-and-int4 modulo (%)
operators since they didn't seem as important from a performance standpoint.
Per a complaint last January from ykhuang.
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
the float8 versions of the aggregates, which is all that the standard requires.
Sergey's original patch also provided versions using numeric arithmetic,
but given the size and slowness of the code, I doubt we ought to include
those in core.
can tell whether it is being used as an aggregate or not. This allows
such a function to avoid re-pallocing a pass-by-reference transition
value; normally it would be unsafe for a function to scribble on an input,
but in the aggregate case it's safe to reuse the old transition value.
Make int8inc() do this. This gets a useful improvement in the speed of
COUNT(*), at least on narrow tables (it seems to be swamped by I/O when
the table rows are wide). Per a discussion in early December with
Neil Conway. I also fixed int_aggregate.c to check this, thereby
turning it into something approaching a supportable technique instead
of being a crude hack.
bigint variants). Clean up some inconsistencies in error message wording.
Fix scanint8 to allow trailing whitespace in INT64_MIN case. Update
int8-exp-three-digits.out, which seems to have been ignored by the last
couple of people to modify the int8 regression test, and remove
int8-exp-three-digits-win32.out which is thereby exposed as redundant.
any amount of leading or trailing whitespace (where "whitespace"
is defined by isspace()). This is for SQL conformance, as well
as consistency with other numeric types (e.g. oid, numeric).
Also refactor pg_atoi() to avoid looking at errno where not
necessary, and add a bunch of regression tests for the input
to these types.
Andres Freund