593 Commits (f8715ec86608fc5f6c80f5dec3369b4cc56481a8)

Author	SHA1	Message	Date
David Rowley	42473b3b31	Have the planner replace COUNT(ANY) with COUNT(*), when possible ... This adds SupportRequestSimplifyAggref to allow pg_proc.prosupport functions to receive an Aggref and allow them to determine if there is a way that the Aggref call can be optimized. Also added is a support function to allow transformation of COUNT(ANY) into COUNT(*). This is possible to do when the given "ANY" cannot be NULL and also that there are no ORDER BY / DISTINCT clauses within the Aggref. This is a useful transformation to do as it is common that people write COUNT(1), which until now has added unneeded overhead. When counting a NOT NULL column. The overheads can be worse as that might mean deforming more of the tuple, which for large fact tables may be many columns in. It may be possible to add prosupport functions for other aggregates. We could consider if ORDER BY could be dropped for some calls, e.g. the ORDER BY is quite useless in MAX(c ORDER BY c). There is a little bit of passing fallout from adjusting expr_is_nonnullable() to handle Const which results in a plan change in the aggregates.out regression test. Previously, nothing was able to determine that "One-Time Filter: (100 IS NOT NULL)" was always true, therefore useless to include in the plan. Author: David Rowley <dgrowleyml@gmail.com> Reviewed-by: Corey Huinker <corey.huinker@gmail.com> Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com> Discussion: https://postgr.es/m/CAApHDvqGcPTagXpKfH=CrmHBqALpziThJEDs_MrPqjKVeDF9wA@mail.gmail.com	3 weeks ago
Etsuro Fujita	c3eec94fc1	postgres_fdw: Add more test coverage for EvalPlanQual testing. ... postgres_fdw supports EvalPlanQual testing by using the infrastructure provided by the core with the RecheckForeignScan callback routine (cf. commits 5fc4c26db and 385f337c9), but there has been no test coverage for that, except that recent commit 12609fbac, which fixed an issue in commit 385f337c9, added a test case to exercise only a code path added by that commit to the core infrastructure. So let's add test cases to exercise other code paths as well at this time. Like commit 12609fbac, back-patch to all supported branches. Reported-by: Masahiko Sawada <sawada.mshk@gmail.com> Author: Etsuro Fujita <etsuro.fujita@gmail.com> Discussion: https://postgr.es/m/CAPmGK15%2B6H%3DkDA%3D-y3Y28OAPY7fbAdyMosVofZZ%2BNc769epVTQ%40mail.gmail.com Backpatch-through: 13	1 month ago
David Rowley	6d0eba6627	Use stack allocated StringInfoDatas, where possible ... Various places that were using StringInfo but didn't need that StringInfo to exist beyond the scope of the function were using makeStringInfo(), which allocates both a StringInfoData and the buffer it uses as two separate allocations. It's more efficient for these cases to use a StringInfoData on the stack and initialize it with initStringInfo(), which only allocates the string buffer. This also simplifies the cleanup, in a few cases. Author: Mats Kindahl <mats.kindahl@gmail.com> Reviewed-by: David Rowley <dgrowleyml@gmail.com> Reviewed-by: Chao Li <li.evan.chao@gmail.com> Discussion: https://postgr.es/m/4379aac8-26f1-42f2-a356-ff0e886228d3@gmail.com	1 month ago
David Rowley	2470ca435c	Use CompactAttribute more often, when possible ... 5983a4cff added CompactAttribute for storing commonly used fields from FormData_pg_attribute. 5983a4cff didn't go to the trouble of adjusting every location where we can use CompactAttribute rather than FormData_pg_attribute, so here we change the remaining ones. There are some locations where I've left the code using FormData_pg_attribute. These are mostly in the ALTER TABLE code. Using CompactAttribute here seems more risky as often the TupleDesc is being changed and those changes may not have been flushed to the CompactAttribute yet. I've also left record_recv(), record_send(), record_cmp(), record_eq() and record_image_eq() alone as it's not clear to me that accessing the CompactAttribute is a win here due to the FormData_pg_attribute still having to be accessed for most cases. Switching the relevant parts to use CompactAttribute would result in having to access both for common cases. Careful benchmarking may reveal that something can be done to make this better, but in absence of that, the safer option is to leave these alone. In ReorderBufferToastReplace(), there was a check to skip attnums < 0 while looping over the TupleDesc. Doing this is redundant since TupleDescs don't store < 0 attnums. Removing that code allows us to move to using CompactAttribute. The change in validateDomainCheckConstraint() just moves fetching the FormData_pg_attribute into the ERROR path, which is cold due to calling errstart_cold() and results in code being moved out of the common path. Author: David Rowley <dgrowleyml@gmail.com> Reviewed-by: Michael Paquier <michael@paquier.xyz> Discussion: https://postgr.es/m/CAApHDvrMy90o1Lgkt31F82tcSuwRFHq3vyGewSRN=-QuSEEvyQ@mail.gmail.com	2 months ago
Masahiko Sawada	4bea91f21f	Support COPY TO for partitioned tables. ... Previously, COPY TO command didn't support directly specifying partitioned tables so users had to use COPY (SELECT ...) TO variant. This commit adds direct COPY TO support for partitioned tables, improving both usability and performance. Performance tests show it's faster than the COPY (SELECT ...) TO variant as it avoids the overheads of query processing and sending results to the COPY TO command. When used with partitioned tables, COPY TO copies the same rows as SELECT * FROM table. Row-level security policies of the partitioned table are applied in the same way as when executing COPY TO on a plain table. Author: jian he <jian.universality@gmail.com> Reviewed-by: vignesh C <vignesh21@gmail.com> Reviewed-by: David Rowley <dgrowleyml@gmail.com> Reviewed-by: Melih Mutlu <m.melihmutlu@gmail.com> Reviewed-by: Kirill Reshke <reshkekirill@gmail.com> Reviewed-by: Atsushi Torikoshi <torikoshia@oss.nttdata.com> Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de> Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com> Reviewed-by: Chao Li <li.evan.chao@gmail.com> Discussion: https://postgr.es/m/CACJufxEZt%2BG19Ors3bQUq-42-61__C%3Dy5k2wk%3DsHEFRusu7%3DiQ%40mail.gmail.com	2 months ago
Etsuro Fujita	12609fbacb	Fix EvalPlanQual handling of foreign/custom joins in ExecScanFetch. ... If inside an EPQ recheck, ExecScanFetch would run the recheck method function for foreign/custom joins even if they aren't descendant nodes in the EPQ recheck plan tree, which is problematic at least in the foreign-join case, because such a foreign join isn't guaranteed to have an alternative local-join plan required for running the recheck method function; in the postgres_fdw case this could lead to a segmentation fault or an assert failure in an assert-enabled build when running the recheck method function. Even if inside an EPQ recheck, any scan nodes that aren't descendant ones in the EPQ recheck plan tree should be normally processed by using the access method function; fix by modifying ExecScanFetch so that if inside an EPQ recheck, it runs the recheck method function for foreign/custom joins that are descendant nodes in the EPQ recheck plan tree as before and runs the access method function for foreign/custom joins that aren't. This fix also adds to postgres_fdw an isolation test for an EPQ recheck that caused issues stated above. Oversight in commit 385f337c9. Reported-by: Kristian Lejao <kristianlejao@gmail.com> Author: Masahiko Sawada <sawada.mshk@gmail.com> Co-authored-by: Etsuro Fujita <etsuro.fujita@gmail.com> Reviewed-by: Michael Paquier <michael@paquier.xyz> Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com> Discussion: https://postgr.es/m/CAD21AoBpo6Gx55FBOW+9s5X=nUw3Xpq64v35fpDEKsTERnc4TQ@mail.gmail.com Backpatch-through: 13	2 months ago
Richard Guo	8e11859102	Implement Eager Aggregation ... Eager aggregation is a query optimization technique that partially pushes aggregation past a join, and finalizes it once all the relations are joined. Eager aggregation may reduce the number of input rows to the join and thus could result in a better overall plan. In the current planner architecture, the separation between the scan/join planning phase and the post-scan/join phase means that aggregation steps are not visible when constructing the join tree, limiting the planner's ability to exploit aggregation-aware optimizations. To implement eager aggregation, we collect information about aggregate functions in the targetlist and HAVING clause, along with grouping expressions from the GROUP BY clause, and store it in the PlannerInfo node. During the scan/join planning phase, this information is used to evaluate each base or join relation to determine whether eager aggregation can be applied. If applicable, we create a separate RelOptInfo, referred to as a grouped relation, to represent the partially-aggregated version of the relation and generate grouped paths for it. Grouped relation paths can be generated in two ways. The first method involves adding sorted and hashed partial aggregation paths on top of the non-grouped paths. To limit planning time, we only consider the cheapest or suitably-sorted non-grouped paths in this step. Alternatively, grouped paths can be generated by joining a grouped relation with a non-grouped relation. Joining two grouped relations is currently not supported. To further limit planning time, we currently adopt a strategy where partial aggregation is pushed only to the lowest feasible level in the join tree where it provides a significant reduction in row count. This strategy also helps ensure that all grouped paths for the same grouped relation produce the same set of rows, which is important to support a fundamental assumption of the planner. For the partial aggregation that is pushed down to a non-aggregated relation, we need to consider all expressions from this relation that are involved in upper join clauses and include them in the grouping keys, using compatible operators. This is essential to ensure that an aggregated row from the partial aggregation matches the other side of the join if and only if each row in the partial group does. This ensures that all rows within the same partial group share the same "destiny", which is crucial for maintaining correctness. One restriction is that we cannot push partial aggregation down to a relation that is in the nullable side of an outer join, because the NULL-extended rows produced by the outer join would not be available when we perform the partial aggregation, while with a non-eager-aggregation plan these rows are available for the top-level aggregation. Pushing partial aggregation in this case may result in the rows being grouped differently than expected, or produce incorrect values from the aggregate functions. If we have generated a grouped relation for the topmost join relation, we finalize its paths at the end. The final paths will compete in the usual way with paths built from regular planning. The patch was originally proposed by Antonin Houska in 2017. This commit reworks various important aspects and rewrites most of the current code. However, the original patch and reviews were very useful. Author: Richard Guo <guofenglinux@gmail.com> Author: Antonin Houska <ah@cybertec.at> (in an older version) Reviewed-by: Robert Haas <robertmhaas@gmail.com> Reviewed-by: Jian He <jian.universality@gmail.com> Reviewed-by: Tender Wang <tndrwang@gmail.com> Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: David Rowley <dgrowleyml@gmail.com> Reviewed-by: Tomas Vondra <tomas@vondra.me> (in an older version) Reviewed-by: Andy Fan <zhihuifan1213@163.com> (in an older version) Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com> (in an older version) Discussion: https://postgr.es/m/CAMbWs48jzLrPt1J_00ZcPZXWUQKawQOFE8ROc-ADiYqsqrpBNw@mail.gmail.com	2 months ago
Robert Haas	8c49a484e8	Assign each subquery a unique name prior to planning it. ... Previously, subqueries were given names only after they were planned, which makes it difficult to use information from a previous execution of the query to guide future planning. If, for example, you knew something about how you want "InitPlan 2" to be planned, you won't know whether the subquery you're currently planning will end up being "InitPlan 2" until after you've finished planning it, by which point it's too late to use the information that you had. To fix this, assign each subplan a unique name before we begin planning it. To improve consistency, use textual names for all subplans, rather than, as we did previously, a mix of numbers (such as "InitPlan 1") and names (such as "CTE foo"), and make sure that the same name is never assigned more than once. We adopt the somewhat arbitrary convention of using the type of sublink to set the plan name; for example, a query that previously had two expression sublinks shown as InitPlan 2 and InitPlan 1 will now end up named expr_1 and expr_2. Because names are assigned before rather than after planning, some of the regression test outputs show the numerical part of the name switching positions: what was previously SubPlan 2 was actually the first one encountered, but we finished planning it later. We assign names even to subqueries that aren't shown as such within the EXPLAIN output. These include subqueries that are a FROM clause item or a branch of a set operation, rather than something that will be turned into an InitPlan or SubPlan. The purpose of this is to make sure that, below the topmost query level, there's always a name for each subquery that is stable from one planning cycle to the next (assuming no changes to the query or the database schema). Author: Robert Haas <rhaas@postgresql.org> Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com> Reviewed-by: Richard Guo <guofenglinux@gmail.com> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Junwang Zhao <zhjwpku@gmail.com> Discussion: http://postgr.es/m/3641043.1758751399@sss.pgh.pa.us	2 months ago
Álvaro Herrera	1a8b5b11e4	Don't include access/htup_details.h in executor/tuptable.h ... This is not at all needed; I suspect it was a simple mistake in commit 5408e233f0. It causes htup_details.h to bleed into a huge number of places via execnodes.h. Remove it and fix fallout. Discussion: https://postgr.es/m/202510021240.ptc2zl5cvwen@alvherre.pgsql	2 months ago
Robert Haas	f2bae51dfd	Keep track of what RTIs a Result node is scanning. ... Result nodes now include an RTI set, which is only non-NULL when they have no subplan, and is taken from the relid set of the RelOptInfo that the Result is generating. ExplainPreScanNode now takes notice of these RTIs, which means that a few things get schema-qualified in the regression tests that previously did not. This makes the output more consistent between cases where some part of the plan tree is replaced by a Result node and those where this does not happen. Likewise, pg_overexplain's EXPLAIN (RANGE_TABLE) now displays the RTIs stored in a Result node just as it already does for other RTI-bearing node types. Result nodes also now include a result_reason, which tells us something about why the Result node was inserted. Using that information, EXPLAIN now emits, where relevant, a "Replaces" line describing the origin of a Result node. The purpose of these changes is to allow code that inspects a Plan tree to understand the origin of Result nodes that appear therein. Discussion: http://postgr.es/m/CA+TgmoYeUZePZWLsSO+1FAN7UPePT_RMEZBKkqYBJVCF1s60=w@mail.gmail.com Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com> Reviewed-by: Richard Guo <guofenglinux@gmail.com> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>	3 months ago
Tom Lane	83a5641945	Provide more-specific error details/hints for function lookup failures. ... Up to now we've contented ourselves with a one-size-fits-all error hint when we fail to find any match to a function or procedure call. That was mostly okay in the beginning, but it was never great, and since the introduction of named arguments it's really not adequate. We at least ought to distinguish "function name doesn't exist" from "function name exists, but not with those argument names". And the rules for named-argument matching are arcane enough that some more detail seems warranted if we match the argument names but the call still doesn't work. This patch creates a framework for dealing with these problems: FuncnameGetCandidates and related code will now pass back a bitmask of flags showing how far the match succeeded. This allows a considerable amount of granularity in the reports. The set-bits-in-a-bitmask approach means that when there are multiple candidate functions, the report will reflect the match(es) that got the furthest, which seems correct. Also, we can avoid mentioning "maybe add casts" unless failure to match argument types is actually the issue. Extend the same return-a-bitmask approach to OpernameGetCandidates. The issues around argument names don't apply to operator syntax, but it still seems worth distinguishing between "there is no operator of that name" and "we couldn't match the argument types". While at it, adjust these messages and related ones to more strictly separate "detail" from "hint", following our message style guidelines' distinction between those. Reported-by: Dominique Devienne <ddevienne@gmail.com> Author: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Robert Haas <robertmhaas@gmail.com> Discussion: https://postgr.es/m/1756041.1754616558@sss.pgh.pa.us	3 months ago
Robert Haas	585e31fcb6	Don't generate fake "*SELECT*" or "*SELECT* %d" subquery aliases. ... rte->alias should point only to a user-written alias, but in these cases that principle was violated. Fixing this causes some regression test output changes: wherever rte->alias previously had a value and is now NULL, rte->eref is now set to a generated name rather than to rte->alias; and the scheme used to generate eref names differs from what we were doing for aliases. The upshot is that instead of "*SELECT*" or "*SELECT* %d", EXPLAIN will now emit "unnamed_subquery" or "unnamed_subquery_%d". But that's a reasonable descriptor, and we were already producing that in yet other cases, so this seems not too objectionable. Author: Tom Lane <tgl@sss.pgh.pa.us> Co-authored-by: Robert Haas <rhaas@postgresql.org> Discussion: https://postgr.es/m/CA+TgmoYSYmDA2GvanzPMci084n+mVucv0bJ0HPbs6uhmMN6HMg@mail.gmail.com	3 months ago
Michael Paquier	36aed19fd9	postgres_fdw: Use psql variables for connection parameters ... Several statements need to reference the current connection's current database name and current port value. Until now, this has been accomplished by creating dynamic SQL statements inside of a DO block, which is not as easy to parse. It also takes away some of the granularity of any error messages that might occur, making debugging harder. By capturing the connection-specific settings into psql variables, it becomes possible to write simpler SQL statements for the FDW objects. This eliminates most of DO blocks used in this test, making it a bit more readable and shorter. Author: Author: Corey Huinker <corey.huinker@gmail.com> Discussion: https://postgr.es/m/CADkLM=cpUiJ3QF7aUthTvaVMmgQcm7QqZBRMDLhBRTR+gJX-Og@mail.gmail.com	4 months ago
Michael Paquier	783cbb6d5e	postgres_fdw: Fix tests with ANALYZE and remote sampling ... The tests fixed in this commit were changing the sampling setting of a foreign server, but then were analyzing a local table instead of a foreign table, meaning that the test was not running for its original purpose. This commit changes the ANALYZE commands to analyze the foreign table, and changes the foreign table definition to point to a valid remote table. Attempting to analyze the foreign table "analyze_ftable" would have failed before this commit, because "analyze_rtable1" is not defined on the remote side. Issue introduced by 8ad51b5f44. Author: Corey Huinker <corey.huinker@gmail.com> Discussion: https://postgr.es/m/CADkLM=cpUiJ3QF7aUthTvaVMmgQcm7QqZBRMDLhBRTR+gJX-Og@mail.gmail.com Backpatch-through: 16	4 months ago
Peter Eisentraut	138750dde4	postgres_fdw and dblink should check if backend has MyProcPort ... before checking ->has_scram_keys. MyProcPort is NULL in background workers. So this could crash for example if a background worker accessed a suitable configured foreign table. Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru> Reviewed-by: Peter Eisentraut <peter@eisentraut.org> Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com> Discussion: https://www.postgresql.org/message-id/flat/27b29a35-9b96-46a9-bc1a-914140869dac%40gmail.com	4 months ago
Etsuro Fujita	62a1211d33	Disallow collecting transition tuples from child foreign tables. ... Commit 9e6104c66 disallowed transition tables on foreign tables, but failed to account for cases where a foreign table is a child table of a partitioned/inherited table on which transition tables exist, leading to incorrect transition tuples collected from such foreign tables for queries on the parent table triggering transition capture. This occurred not only for inherited UPDATE/DELETE but for partitioned INSERT later supported by commit 3d956d956, which should have handled it at least for the INSERT case, but didn't. To fix, modify ExecAR*Triggers to throw an error if the given relation is a foreign table requesting transition capture. Also, this commit fixes make_modifytable so that in case of an inherited UPDATE/DELETE triggering transition capture, FDWs choose normal operations to modify child foreign tables, not DirectModify; which is needed because they would otherwise skip the calls to ExecAR*Triggers at execution, causing unexpected behavior. Author: Etsuro Fujita <etsuro.fujita@gmail.com> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Discussion: https://postgr.es/m/CAPmGK14QJYikKzBDCe3jMbpGENnQ7popFmbEgm-XTNuk55oyHg%40mail.gmail.com Backpatch-through: 13	4 months ago
Peter Eisentraut	73d33be4da	Remove INT64_HEX_FORMAT and UINT64_HEX_FORMAT ... These were introduced (commit efdc7d7475) at the same time as we were moving to using the standard inttypes.h format macros (commit a0ed19e0a9). It doesn't seem useful to keep a new already-deprecated interface like this with only a few users, so remove the new symbols again and have the callers use PRIx64. (Also, INT64_HEX_FORMAT was kind of a misnomer, since hex formats all use unsigned types.) Reviewed-by: Nathan Bossart <nathandbossart@gmail.com> Reviewed-by: Thomas Munro <thomas.munro@gmail.com> Discussion: https://www.postgresql.org/message-id/flat/0ac47b5d-e5ab-4cac-98a7-bdee0e2831e4%40eisentraut.org	4 months ago
Tom Lane	74e121c8dc	Split up pgfdw_report_error so that we can mark it pg_noreturn. ... pgfdw_report_error has the same design fault as elog/ereport do, namely that it might or might not return depending on elevel. While those functions are too widely used to redesign, there are only about 30 call sites for pgfdw_report_error, and it's not exposed for extension use. So let's rethink it. Split it into pgfdw_report_error() which hard-wires ERROR elevel and is marked pg_noreturn, and pgfdw_report() which allows only elevels less than ERROR. (Thanks to Álvaro Herrera for suggesting this naming.) The motivation for doing this now is that in the wake of commit 80aa9848b, which removed a bunch of PG_TRYs from postgres_fdw, we're seeing more thorough flow analysis there from C compilers and Coverity. Marking pgfdw_report_error as noreturn where appropriate should help prevent false-positive complaints. We could alternatively have invented a macro wrapper similar to what we use for elog/ereport, but that code is sufficiently fragile that I didn't find it appetizing to make another copy. Since 80aa9848b already changed pgfdw_report_error's signature, this won't make back-patching any harder than it was already. Author: Tom Lane <tgl@sss.pgh.pa.us> Discussion: https://postgr.es/m/420221.1753714491@sss.pgh.pa.us	5 months ago
Tom Lane	b9ebb92bcb	Suppress uninitialized-variable warning. ... In the wake of commit 80aa9848b, a few compilers think that postgresAcquireSampleRowsFunc's "reltuples" might be used uninitialized. The logic is visibly correct, both before and after that change; presumably what happened here is that the previous presence of a setjmp() in the function stopped them from attempting any flow analysis at all. Add a dummy initialization to silence the warning. Reported-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com> Author: Tom Lane <tgl@sss.pgh.pa.us> Discussion: https://postgr.es/m/CAExHW5tkerCufA_F6oct5dMJ61N+yVrVgYXL7M8dD-5_zXjrDw@mail.gmail.com	5 months ago
Tom Lane	0f9d4d7c12	Silence leakage complaint about postgres_fdw's InitPgFdwOptions. ... Valgrind complains that the PQconninfoOption array returned by libpq is leaked. We apparently believed that we could suppress that warning by storing that array's address in a static variable. However, modern C compilers are bright enough to optimize the static variable away. We could escalate that arms race by making the variable global. But on the whole it seems better to revise the code so that it can free libpq's result properly. The only thing that costs us is copying the parameter-name keywords; which seems like a pretty negligible cost in a function that runs at most once per process. Author: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com> Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us	5 months ago
Tom Lane	73873805fb	Run pgindent on the changes of the previous patch. ... This step can be checked mechanically. Author: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com> Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us	5 months ago
Tom Lane	80aa9848be	Reap the benefits of not having to avoid leaking PGresults. ... Remove a bunch of PG_TRY constructs, de-volatilize related variables, remove some PQclear calls in error paths. Aside from making the code simpler and shorter, this should provide some marginal performance gains. For ease of review, I did not re-indent code within the removed PG_TRY constructs. That'll be done in a separate patch. Author: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com> Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us	5 months ago
Tom Lane	7d8f595779	Create infrastructure to reliably prevent leakage of PGresults. ... Commit 232d8caea fixed a case where postgres_fdw could lose track of a PGresult object, resulting in a process-lifespan memory leak. But I have little faith that there aren't other potential PGresult leakages, now or in future, in the backend modules that use libpq. Therefore, this patch proposes infrastructure that makes all PGresults returned from libpq act as though they are palloc'd in the CurrentMemoryContext (with the option to relocate them to another context later). This should greatly reduce the risk of careless leaks, and it also permits removal of a bunch of code that attempted to prevent such leaks via PG_TRY blocks. This patch adds infrastructure that wraps each PGresult in a "libpqsrv_PGresult" that provides a memory context reset callback to PQclear the PGresult. Code using this abstraction is inherently memory-safe to the same extent as we are accustomed to in most backend code. Furthermore, we add some macros that automatically redirect calls of the libpq functions concerned with PGresults to use this infrastructure, so that almost no source-code changes are needed to wheel this infrastructure into place in all the backend code that uses libpq. Perhaps in future we could create similar infrastructure for PGconn objects, but there seems less need for that. This patch just creates the infrastructure and makes relevant code use it, including reverting 232d8caea in favor of this mechanism. A good deal of follow-on simplification is possible now that we don't have to be so cautious about freeing PGresults, but I'll put that in a separate patch. Author: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com> Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us	5 months ago
Fujii Masao	a7ca73af66	Remove translation marker from libpq-be-fe-helpers.h. ... Commit 112faf1378 introduced a translation marker in libpq-be-fe-helpers.h, but this caused build failures on some platforms—such as the one reported by buildfarm member indri—due to linker issues with dblink. This is the same problem previously addressed in commit 213c959a29. To fix the issue, this commit removes the translation marker from libpq-be-fe-helpers.h, following the approach used in 213c959a29. It also removes the associated gettext_noop() calls added in commit 112faf1378, as they are no longer needed. While reviewing this, a gettext_noop() call was also found in contrib/basic_archive. Since contrib modules don't support translation, this call has been removed as well. Per buildfarm member indri. Author: Fujii Masao <masao.fujii@gmail.com> Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de> Discussion: https://postgr.es/m/0e6299d9-608a-4ffa-aeb1-40cb8a99000b@oss.nttdata.com	5 months ago
Fujii Masao	112faf1378	Log remote NOTICE, WARNING, and similar messages using ereport(). ... Previously, NOTICE, WARNING, and similar messages received from remote servers over replication, postgres_fdw, or dblink connections were printed directly to stderr on the local server (e.g., the subscriber). As a result, these messages lacked log prefixes (e.g., timestamp), making them harder to trace and correlate with other log entries. This commit addresses the issue by introducing a custom notice receiver for replication, postgres_fdw, and dblink connections. These messages are now logged via ereport(), ensuring they appear in the logs with proper formatting and context, which improves clarity and aids in debugging. Author: Vignesh C <vignesh21@gmail.com> Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de> Reviewed-by: Fujii Masao <masao.fujii@gmail.com> Discussion: https://postgr.es/m/CALDaNm2xsHpWRtLm-VL_HJCsaE3+1Y_n-jDEAr3-suxVqc3xoQ@mail.gmail.com	5 months ago
Richard Guo	e2debb6438	Reduce "Var IS [NOT] NULL" quals during constant folding ... In commit b262ad440, we introduced an optimization that reduces an IS [NOT] NULL qual on a NOT NULL column to constant true or constant false, provided we can prove that the input expression of the NullTest is not nullable by any outer joins or grouping sets. This deduction happens quite late in the planner, during the distribution of quals to rels in query_planner. However, this approach has some drawbacks: we can't perform any further folding with the constant, and it turns out to be prone to bugs. Ideally, this deduction should happen during constant folding. However, the per-relation information about which columns are defined as NOT NULL is not available at that point. This information is currently collected from catalogs when building RelOptInfos for base or "other" relations. This patch moves the collection of NOT NULL attribute information for relations before pull_up_sublinks, storing it in a hash table keyed by relation OID. It then uses this information to perform the NullTest deduction for Vars during constant folding. This also makes it possible to leverage this information to pull up NOT IN subqueries. Note that this patch does not get rid of restriction_is_always_true and restriction_is_always_false. Removing them would prevent us from reducing some IS [NOT] NULL quals that we were previously able to reduce, because (a) the self-join elimination may introduce new IS NOT NULL quals after constant folding, and (b) if some outer joins are converted to inner joins, previously irreducible NullTest quals may become reducible. Author: Richard Guo <guofenglinux@gmail.com> Reviewed-by: Robert Haas <robertmhaas@gmail.com> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Discussion: https://postgr.es/m/CAMbWs4-bFJ1At4btk5wqbezdu8PLtQ3zv-aiaY3ry9Ymm=jgFQ@mail.gmail.com	5 months ago
Alexander Korotkov	4c5159a2d8	Fix a typo in the deparseArrayCoerceExpr() header comment ... Discussion: https://postgr.es/m/CAHewXNn%3D_ykCtcTw5SCfZ-eVr4m%2BCuc804rGeMsKuj%3DD4xpL4w%40mail.gmail.com Author: Tender Wang <tndrwang@gmail.com>	5 months ago
Alexander Korotkov	62c3b4cd9d	Support for deparsing of ArrayCoerceExpr node in contrib/postgres_fdw ... When using a prepared statement to select data from a PostgreSQL foreign table (postgres_fdw) with the "field = ANY($1)" expression, the operation is not pushed down when an implicit type case is applied, and a generic plan is used. This commit resolves the issue by supporting the push-down of ArrayCoerceExpr, which is used in this case. The support is quite straightforward and similar to other nods, such as RelabelType. Discussion: https://postgr.es/m/4f0cea802476d23c6e799512ffd17aff%40postgrespro.ru Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru> Reviewed-by: Maxim Orlov <orlovmg@gmail.com> Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>	5 months ago
Etsuro Fujita	21c9756db6	postgres_fdw: Add Assert to estimate_path_cost_size(). ... When estimating the cost/size of a pre-sorted path for a given upper relation using local stats, this function dereferences the passed-in PgFdwPathExtraData pointer without checking that it is not NULL. But that is not a bug as the pointer is guaranteed to be non-NULL in that case; to avoid confusion, add an Assert to ensure that it is not NULL before dereferencing it. Reported-by: Ranier Vilela <ranier.vf@gmail.com> Author: Etsuro Fujita <etsuro.fujita@gmail.com> Reviewed-by: Ranier Vilela <ranier.vf@gmail.com> Discussion: https://postgr.es/m/CAEudQArgiALbV1akQpeZOgim7XP05n%3DbDP1%3DTcOYLA43nRX_vA%40mail.gmail.com	5 months ago
Peter Eisentraut	f039c22441	meson: Increase minimum version to 0.57.2 ... The previous minimum was to maintain support for Python 3.5, but we now require Python 3.6 anyway (commit 45363fca63), so that reason is obsolete. A small raise to Meson 0.57 allows getting rid of a fair amount of version conditionals and silences some future-deprecated warnings. With the version bump, the following deprecation warnings appeared and are fixed: WARNING: Project targets '>=0.57' but uses feature deprecated since '0.55.0': ExternalProgram.path. use ExternalProgram.full_path() instead WARNING: Project targets '>=0.57' but uses feature deprecated since '0.56.0': meson.build_root. use meson.project_build_root() or meson.global_build_root() instead. It turns out that meson 0.57.0 and 0.57.1 are buggy for our use, so the minimum is actually set to 0.57.2. This is specific to this version series; in the future we won't necessarily need to be this precise. Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com> Reviewed-by: Andres Freund <andres@anarazel.de> Discussion: https://www.postgresql.org/message-id/flat/42e13eb0-862a-441e-8d84-4f0fd5f6def0%40eisentraut.org	6 months ago
Nathan Bossart	bd09f024a1	Add new OID alias type regdatabase. ... This provides a convenient way to look up a database's OID. For example, the query SELECT * FROM pg_shdepend WHERE dbid = (SELECT oid FROM pg_database WHERE datname = current_database()); can now be simplified to SELECT * FROM pg_shdepend WHERE dbid = current_database()::regdatabase; Like the regrole type, regdatabase has cluster-wide scope, so we disallow regdatabase constants from appearing in stored expressions. Bumps catversion. Author: Ian Lawrence Barwick <barwick@gmail.com> Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com> Reviewed-by: Jian He <jian.universality@gmail.com> Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Discussion: https://postgr.es/m/aBpjJhyHpM2LYcG0%40nathan	6 months ago
Etsuro Fujita	7d4667c620	Revert "postgres_fdw: Inherit the local transaction's access/deferrable modes." ... We concluded that commit e5a3c9d9b is a feature rather than a fix; since it was added after feature freeze, revert it. Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com> Reported-by: Michael Paquier <michael@paquier.xyz> Reported-by: Robert Haas <robertmhaas@gmail.com> Discussion: https://postgr.es/m/ed2296f1-1a6b-4932-b870-5bb18c2591ae%40oss.nttdata.com	6 months ago
Etsuro Fujita	e5a3c9d9b5	postgres_fdw: Inherit the local transaction's access/deferrable modes. ... Previously, postgres_fdw always 1) opened a remote transaction in READ WRITE mode even when the local transaction was READ ONLY, causing a READ ONLY transaction using it that references a foreign table mapped to a remote view executing a volatile function to write in the remote side, and 2) opened the remote transaction in NOT DEFERRABLE mode even when the local transaction was DEFERRABLE, causing a SERIALIZABLE READ ONLY DEFERRABLE transaction using it to abort due to a serialization failure in the remote side. To avoid these, modify postgres_fdw to open a remote transaction in the same access/deferrable modes as the local transaction. This commit also modifies it to open a remote subtransaction in the same access mode as the local subtransaction. Although these issues exist since the introduction of postgres_fdw, there have been no reports from the field. So it seems fine to just fix them in master only. Author: Etsuro Fujita <etsuro.fujita@gmail.com> Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Discussion: https://postgr.es/m/CAPmGK16n_hcUUWuOdmeUS%2Bw4Q6dZvTEDHb%3DOP%3D5JBzo-M3QmpQ%40mail.gmail.com	7 months ago
Tom Lane	232d8caeaa	Fix memory leakage in postgres_fdw's DirectModify code path. ... postgres_fdw tries to use PG_TRY blocks to ensure that it will eventually free the PGresult created by the remote modify command. However, it's fundamentally impossible for this scheme to work reliably when there's RETURNING data, because the query could fail in between invocations of postgres_fdw's DirectModify methods. There is at least one instance of exactly this situation in the regression tests, and the ensuing session-lifespan leak is visible under Valgrind. We can improve matters by using a memory context reset callback attached to the ExecutorState context. That ensures that the PGresult will be freed when the ExecutorState context is torn down, even if control never reaches postgresEndDirectModify. I have little faith that there aren't other potential PGresult leakages in the backend modules that use libpq. So I think it'd be a good idea to apply this concept universally by creating infrastructure that attaches a reset callback to every PGresult generated in the backend. However, that seems too invasive for v18 at this point, let alone the back branches. So for the moment, apply this narrow fix that just makes DirectModify safe. I have a patch in the queue for the more general idea, but it will have to wait for v19. Author: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com> Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us Backpatch-through: 13	7 months ago
Heikki Linnakangas	b28c59a6cd	Use 'void *' for arbitrary buffers, 'uint8 *' for byte arrays ... A 'void *' argument suggests that the caller might pass an arbitrary struct, which is appropriate for functions like libc's read/write, or pq_sendbytes(). 'uint8 *' is more appropriate for byte arrays that have no structure, like the cancellation keys or SCRAM tokens. Some places used 'char *', but 'uint8 *' is better because 'char *' is commonly used for null-terminated strings. Change code around SCRAM, MD5 authentication, and cancellation key handling to follow these conventions. Discussion: https://www.postgresql.org/message-id/61be9e31-7b7d-49d5-bc11-721800d89d64@eisentraut.org	7 months ago
Richard Guo	773db22269	Suppress unnecessary explicit sorting for EPQ mergejoin path ... When building a ForeignPath for a joinrel, if there's a possibility that EvalPlanQual will be executed, we must identify a suitable path for EPQ checks. If the outer or inner path of the chosen path is a ForeignPath representing a pushed-down join, we replace it with its fdw_outerpath to ensure that the EPQ check path consists entirely of local joins. If the chosen path is a MergePath, and its outer or inner path is a ForeignPath that is not already well enough ordered, the MergePath will have non-NIL outersortkeys or innersortkeys indicating the desired ordering to be created by an explicit Sort node. If we then replace the outer or inner path with its corresponding fdw_outerpath, and that path is already sufficiently ordered, we end up in an inconsistent state: the MergePath has non-NIL outersortkeys or innersortkeys, and its input path is already properly ordered. This inconsistency can result in an Assert failure or the addition of a redundant Sort node. To fix, check if the new outer or inner path of a MergePath is already properly sorted, and set its outersortkeys or innersortkeys to NIL if so. Bug: #18902 Reported-by: Nikita Kalinin <n.kalinin@postgrespro.ru> Author: Richard Guo <guofenglinux@gmail.com> Reviewed-by: Tender Wang <tndrwang@gmail.com> Discussion: https://postgr.es/m/18902-71c1bed2b9f7c46f@postgresql.org	7 months ago
Jacob Champion	d2e7d2a09d	oauth: Disallow OAuth connections via postgres_fdw/dblink ... A subsequent commit will reclassify oauth_client_secret from dispchar="" to dispchar="*", so that UIs will treat it like a secret. For our FDWs, this change will move that option from SERVER to USER MAPPING, which we need to avoid. But upon further discussion, we don't really want our FDWs to use our builtin Device Authorization flow at all, for several reasons: - the URL and code would be printed to the server logs, not sent over the client connection - tokens are not cached/refreshed, so every single connection has to be manually authorized by a user with a browser - oauth_client_secret needs to belong to the foreign server, but options on SERVER are publicly accessible - all non-superusers would need password_required=false, which is dangerous Future OAuth work can use FDWs as a motivating use case. But for now, disallow all oauth_* connection options for these two extensions. Reviewed-by: Noah Misch <noah@leadboat.com> Discussion: https://postgr.es/m/20250415191435.55.nmisch%40google.com	8 months ago
Michael Paquier	88e947136b	Fix typos and grammar in the code ... The large majority of these have been introduced by recent commits done in the v18 development cycle. Author: Alexander Lakhin <exclusion@gmail.com> Discussion: https://postgr.es/m/9a7763ab-5252-429d-a943-b28941e0e28b@gmail.com	8 months ago
Peter Geoghegan	a6cab6a78e	Harmonize function parameter names for Postgres 18. ... Make sure that function declarations use names that exactly match the corresponding names from function definitions in a few places. These inconsistencies were all introduced during Postgres 18 development. This commit was written with help from clang-tidy, by mechanically applying the same rules as similar clean-up commits (the earliest such commit was commit 035ce1fe).	8 months ago
David Rowley	d69d45a5a9	Speedup child EquivalenceMember lookup in planner ... When planning queries to partitioned tables, we clone all EquivalenceMembers belonging to the partitioned table into em_is_child EquivalenceMembers for each non-pruned partition. For partitioned tables with large numbers of partitions, this meant the ec_members list could become large and code searching that list would become slow. Effectively, the more partitions which were present, the more searches needed to be performed for operations such as find_ec_member_matching_expr() during create_plan() and the more partitions present, the longer these searches would take, i.e., a quadratic slowdown. To fix this, here we adjust how we store EquivalenceMembers for em_is_child members. Instead of storing these directly in ec_members, these are now stored in a new array of Lists in the EquivalenceClass, which is indexed by the relid. When we want to find EquivalenceMembers belonging to a certain child relation, we can narrow the search to the array element for that relation. To make EquivalenceMember lookup easier and to reduce the amount of code change, this commit provides a pair of functions to allow iteration over the EquivalenceMembers of an EC which also handles finding the child members, if required. Callers that never need to look at child members can remain using the foreach loop over ec_members, which will now often be faster due to only parent-level members being stored there. The actual performance increases here are highly dependent on the number of partitions and the query being planned. Performance increases can be visible with as few as 8 partitions, but the speedup is marginal for such low numbers of partitions. The speedups become much more visible with a few dozen to hundreds of partitions. With some tested queries using 56 partitions, the planner was around 3x faster than before. For use cases with thousands of partitions, these are likely to become significantly faster. Some testing has shown planner speedups of 60x or more with 8192 partitions. Author: Yuya Watari <watari.yuya@gmail.com> Co-authored-by: David Rowley <dgrowleyml@gmail.com> Reviewed-by: David Rowley <dgrowleyml@gmail.com> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Andrey Lepikhov <a.lepikhov@postgrespro.ru> Reviewed-by: Alena Rybakina <lena.ribackina@yandex.ru> Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com> Reviewed-by: Amit Langote <amitlangote09@gmail.com> Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com> Tested-by: Thom Brown <thom@linux.com> Tested-by: newtglobal postgresql_contributors <postgresql_contributors@newtglobalcorp.com> Discussion: https://postgr.es/m/CAJ2pMkZNCgoUKSE%2B_5LthD%2BKbXKvq6h2hQN8Esxpxd%2Bcxmgomg%40mail.gmail.com	8 months ago
Peter Eisentraut	8123e91f5a	Convert PathKey to use CompareType ... Change the PathKey struct to use CompareType to record the sort direction instead of hardcoding btree strategy numbers. The CompareType is then converted to the index-type-specific strategy when the plan is created. This reduces the number of places btree strategy numbers are hardcoded, and it's a self-contained subset of a larger effort to allow non-btree indexes to behave like btrees. Author: Mark Dilger <mark.dilger@enterprisedb.com> Co-authored-by: Peter Eisentraut <peter@eisentraut.org> Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com	9 months ago
Tom Lane	55527368bd	Use PG_MODULE_MAGIC_EXT in our installable shared libraries. ... It seems potentially useful to label our shared libraries with version information, now that a facility exists for retrieving that. This patch labels them with the PG_VERSION string. There was some discussion about using semantic versioning conventions, but that doesn't seem terribly helpful for modules with no SQL-level presence; and for those that do have SQL objects, we typically expect them to support multiple revisions of the SQL definitions, so it'd still not be very helpful. I did not label any of src/test/modules/. It seems unnecessary since we don't install those, and besides there ought to be someplace that still provides test coverage for the original PG_MODULE_MAGIC macro. Author: Tom Lane <tgl@sss.pgh.pa.us> Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com	9 months ago
Peter Eisentraut	d2028e9bbc	postgres_fdw: Fix tests on some Windows variants ... The tests introduced by commit 76563f88cf only work when Unix-domain sockets are available. This is optional on Windows, and buildfarm member drongo runs without them. To fix, skip the test if Unix-domain sockets are not enabled.	9 months ago
Alexander Korotkov	62f36d6924	postgres_fdw: Remove redundant check in semijoin_target_ok() ... If a var belongs to the innerrel of the joinrel, it's not possible that it belongs to the outerrel. This commit removes the redundant check from the if-clause but keeps it as an assertion. Discussion: https://postgr.es/m/flat/CAHewXN=8aW4hd_W71F7Ua4+_w0=bppuvvTEBFBF6G0NuSXLwUw@mail.gmail.com Author: Tender Wang <tndrwang@gmail.com> Reviewed-by: Alexander Pyhalov <a.yhalov@postgrespro.ru> Backpatch-through: 17	9 months ago
Alexander Korotkov	023fb51275	postgres_fdw: Avoid pulling up restrict infos from subqueries ... Semi-join joins below left/right join are deparsed as subqueries. Thus, we can't refer to subqueries vars from upper relations. This commit avoids pulling conditions from them. Reported-by: Robins Tharakan <tharakan@gmail.com> Bug: #18852 Discussion: https://postgr.es/m/CAEP4nAzryLd3gwcUpFBAG9MWyDfMRX8ZjuyY2XXjyC_C6k%2B_Zw%40mail.gmail.com Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru> Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com> Backpatch-through: 17	9 months ago
Peter Eisentraut	76563f88cf	postgres_fdw: improve security checks ... SCRAM pass-through should not bypass the FDW security check as it was implemented for postgres_fdw in commit 761c79508e. This commit improves the security check by adding new SCRAM pass-through checks to ensure that the required SCRAM connection options are not overwritten by the user mapping or foreign server options. This is meant to match the security requirements for a password-using connection. Since libpq has no SCRAM-specific equivalent of PQconnectionUsedPassword(), we enforce this instead by making the use_scram_passthrough option of postgres_fdw imply require_auth=scram-sha-256. This means that if use_scram_passthrough is set, some situations that might otherwise have worked are preempted, for example GSSAPI with delegated credentials. This could be enhanced in the future if there is desire for more flexibility. Reported-by: Jacob Champion <jacob.champion@enterprisedb.com> Author: Matheus Alcantara <mths.dev@pm.me> Co-authored-by: Jacob Champion <jacob.champion@enterprisedb.com> Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com> Discussion: https://www.postgresql.org/message-id/flat/CAFY6G8ercA1KES%3DE_0__R9QCTR805TTyYr1No8qF8ZxmMg8z2Q%40mail.gmail.com	9 months ago
Peter Eisentraut	618c64ffd3	Revert workarounds for -Wmissing-braces false positives on old GCC ... We have collected several instances of a workaround for GCC bug 53119, which caused false-positive compiler warnings. This bug has long been fixed, but was still seen on the buildfarm, most recently on lapwing with gcc (Debian 4.7.2-5). (The GCC bug tracker mentions that a fix was backported to 4.7.4 and 4.8.3.) That compiler no longer runs warning-free since commit 6fdd5d9563, so we don't need to keep these workarounds. And furthermore, the consensus appears to be that we don't want to keep supporting that era of platform anymore at all. This reverts the following commits: d937904cce 506428d091 b449afb582 6392f2a096 bad0763a4d 5e0c761d0a and makes a few similar fixes to newer code. Discussion: https://www.postgresql.org/message-id/flat/e170d61f-01ab-4cf9-ab68-91cd1fac62c5%40eisentraut.org Discussion: https://www.postgresql.org/message-id/flat/CA%2BTgmoYEAm-KKZibAP3hSqbTFTjUd47XtVcf3xSFDpyecXX9uQ%40mail.gmail.com	9 months ago
Robert Haas	c65bc2e1d1	Make it possible for loadable modules to add EXPLAIN options. ... Modules can use RegisterExtensionExplainOption to register new EXPLAIN options, and GetExplainExtensionId, GetExplainExtensionState, and SetExplainExtensionState to store related state inside the ExplainState object. Since this substantially increases the amount of code that needs to handle ExplainState-related tasks, move a few bits of existing code to a new file explain_state.c and add the rest of this infrastructure there. See the comments at the top of explain_state.c for further explanation of how this mechanism works. This does not yet provide a way for such such options to do anything useful. The intention is that we'll add hooks for that purpose in a separate commit. Discussion: http://postgr.es/m/CA+TgmoYSzg58hPuBmei46o8D3SKX+SZoO4K_aGQGwiRzvRApLg@mail.gmail.com Reviewed-by: Srinath Reddy <srinath2133@gmail.com> Reviewed-by: Andrei Lepikhov <lepihov@gmail.com> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Sami Imseih <samimseih@gmail.com>	9 months ago
Tom Lane	8b1b342544	Improve EXPLAIN's display of window functions. ... Up to now we just punted on showing the window definitions used in a plan, with window function calls represented as "OVER (?)". To improve that, show the window definition implemented by each WindowAgg plan node, and reference their window names in OVER. For nameless window clauses generated by "OVER (...)", assign unique names w1, w2, etc. In passing, re-order the properties shown for a WindowAgg node so that the Run Condition (if any) appears after the Window property and before the Filter (if any). This seems more sensible since the Run Condition is associated with the Window and acts before the Filter. Thanks to David G. Johnston and Álvaro Herrera for design suggestions. Author: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: David Rowley <dgrowleyml@gmail.com> Discussion: https://postgr.es/m/144530.1741469955@sss.pgh.pa.us	9 months ago
Fujii Masao	fe186bda78	postgres_fdw: Extend postgres_fdw_get_connections to return remote backend PID. ... This commit adds a new "remote_backend_pid" output column to the postgres_fdw_get_connections function. It returns the process ID of the remote backend, on the foreign server, handling the connection. This enhancement is useful for troubleshooting, monitoring, and reporting. For example, if a connection is unexpectedly closed by the foreign server, the remote backend's PID can help diagnose the cause. No extension version bump is needed, as commit c297a47c5f already handled it for v18~. Author: Sagar Dilip Shedge <sagar.shedge92@gmail.com> Reviewed-by: Fujii Masao <masao.fujii@gmail.com> Discussion: https://postgr.es/m/CAPhYifF25q5xUQWXETfKwhc0YVa_6+tfG9Kw4bCvCjpCWxYs2A@mail.gmail.com	10 months ago