Make regression tests locale-proof by setting some locale categories

to C at run-time, and providing alternative output files for different
sort orders.

doc/src/sgml/regress.sgml

@@ -1,4 +1,4 @@
-<!-- $Header: /cvsroot/pgsql/doc/src/sgml/regress.sgml,v 1.26 2002/04/08 04:37:36 tgl Exp $ -->
+<!-- $Header: /cvsroot/pgsql/doc/src/sgml/regress.sgml,v 1.27 2002/05/14 13:05:42 petere Exp $ -->
 
  <chapter id="regress">
   <title id="regress-title">Regression Tests</title>
@@ -177,22 +177,32 @@
     <title>Locale differences</title>
 
     <para>
-     The tests expect to run in plain <quote>C</quote> locale.  This
+     If you run the tests against an already-installed server that was
-     should not cause any problems when you run the tests against a
+     initialized with a collation order locale different than C then
-     temporary installation, since the regression test driver takes care
+     there may be differences due to sort order and follow-up
-     to start the server in C locale.  However, if you run the tests
+     failures.  The regression test suite is set up to handle this
-     against an already-installed server that is using non-C locale settings,
+     problem by providing alternative result files that together are
-     you may see differences caused by varying rules for string sort order,
+     known to handle a large number of locales.  For example, for the
-     formatting of numeric and monetary values, and so forth.
+     <quote>char</quote> test, the expected file
+     <filename>char.out</filename> handles the C and POSIX locales,
+     and the file <filename>char_1.out</filename> handles many other
+     locales.  The regression test driver will automatically pick the
+     best file to match against when checking for success and for
+     computing failure differences.  (This means that the regression
+     tests cannot detect whether the results are appropriate for the
+     configured locale.  The tests will simply pick the one result
+     file that works best.)
     </para>
 
     <para>
-     In some locales the resulting differences are small and easily checked by
+     If for some reason the existing expected files do not cover some
-     inspection.  However, in a locale that changes the rules for formatting
+     locale, you can add a new file.  The naming scheme is
-     of numeric values (typically by swapping the usage of commas and
+     <literal><replaceable>testname</>_<replaceable>digit</>.out</>.
-     decimal points), entry of some data values will fail, resulting in
+     The actual digit is not significant.  Remember that the
-     extensive differences later in the tests where the missing data values
+     regression test driver will consider all such files to be equally
-     are supposed to be used.
+     valid test results.  If the test results are platform-dependent,
+     the technique described in <xref linkend="regress-platform">
+     should be used instead.
     </para>
    </sect2>
     

src/backend/utils/misc/guc.c

@@ -4,7 +4,7 @@
  * Support for grand unified configuration scheme, including SET
  * command, configuration file, and command line options.
  *
- * $Header: /cvsroot/pgsql/src/backend/utils/misc/guc.c,v 1.66 2002/04/21 00:22:52 ishii Exp $
+ * $Header: /cvsroot/pgsql/src/backend/utils/misc/guc.c,v 1.67 2002/05/14 13:05:43 petere Exp $
  *
  * Copyright 2000 by PostgreSQL Global Development Group
  * Written by Peter Eisentraut <peter_e@gmx.net>.
@@ -587,22 +587,22 @@ static struct config_string
 	},
 
 	{
-		"lc_messages", PGC_POSTMASTER, PGC_S_DEFAULT, &locale_messages,
+		"lc_messages", PGC_SUSET, PGC_S_DEFAULT, &locale_messages,
 		"", locale_messages_check, locale_messages_assign
 	},
 
 	{
-		"lc_monetary", PGC_POSTMASTER, PGC_S_DEFAULT, &locale_monetary,
+		"lc_monetary", PGC_USERSET, PGC_S_DEFAULT, &locale_monetary,
 		"", locale_monetary_check, locale_monetary_assign
 	},
 
 	{
-		"lc_numeric", PGC_POSTMASTER, PGC_S_DEFAULT, &locale_numeric,
+		"lc_numeric", PGC_USERSET, PGC_S_DEFAULT, &locale_numeric,
 		"", locale_numeric_check, locale_numeric_assign
 	},
 
 	{
-		"lc_time", PGC_POSTMASTER, PGC_S_DEFAULT, &locale_time,
+		"lc_time", PGC_USERSET, PGC_S_DEFAULT, &locale_time,
 		"", locale_time_check, locale_time_assign
 	},
 

src/test/regress/expected/char_1.out

@@ -0,0 +1,122 @@
+--
+-- CHAR
+--
+-- fixed-length by value
+-- internally passed by value if <= 4 bytes in storage
+SELECT char 'c' = char 'c' AS true;
+ true 
+------
+ t
+(1 row)
+
+--
+-- Build a table for testing
+--
+CREATE TABLE CHAR_TBL(f1 char);
+INSERT INTO CHAR_TBL (f1) VALUES ('a');
+INSERT INTO CHAR_TBL (f1) VALUES ('A');
+-- any of the following three input formats are acceptable 
+INSERT INTO CHAR_TBL (f1) VALUES ('1');
+INSERT INTO CHAR_TBL (f1) VALUES (2);
+INSERT INTO CHAR_TBL (f1) VALUES ('3');
+-- zero-length char 
+INSERT INTO CHAR_TBL (f1) VALUES ('');
+-- try char's of greater than 1 length 
+INSERT INTO CHAR_TBL (f1) VALUES ('cd');
+ERROR:  value too long for type character(1)
+INSERT INTO CHAR_TBL (f1) VALUES ('c     ');
+SELECT '' AS seven, CHAR_TBL.*;
+ seven | f1 
+-------+----
+       | a
+       | A
+       | 1
+       | 2
+       | 3
+       |  
+       | c
+(7 rows)
+
+SELECT '' AS six, c.*
+   FROM CHAR_TBL c
+   WHERE c.f1 <> 'a';
+ six | f1 
+-----+----
+     | A
+     | 1
+     | 2
+     | 3
+     |  
+     | c
+(6 rows)
+
+SELECT '' AS one, c.*
+   FROM CHAR_TBL c
+   WHERE c.f1 = 'a';
+ one | f1 
+-----+----
+     | a
+(1 row)
+
+SELECT '' AS five, c.*
+   FROM CHAR_TBL c
+   WHERE c.f1 < 'a';
+ five | f1 
+------+----
+      | 1
+      | 2
+      | 3
+      |  
+(4 rows)
+
+SELECT '' AS six, c.*
+   FROM CHAR_TBL c
+   WHERE c.f1 <= 'a';
+ six | f1 
+-----+----
+     | a
+     | 1
+     | 2
+     | 3
+     |  
+(5 rows)
+
+SELECT '' AS one, c.*
+   FROM CHAR_TBL c
+   WHERE c.f1 > 'a';
+ one | f1 
+-----+----
+     | A
+     | c
+(2 rows)
+
+SELECT '' AS two, c.*
+   FROM CHAR_TBL c
+   WHERE c.f1 >= 'a';
+ two | f1 
+-----+----
+     | a
+     | A
+     | c
+(3 rows)
+
+DROP TABLE CHAR_TBL;
+--
+-- Now test longer arrays of char
+--
+CREATE TABLE CHAR_TBL(f1 char(4));
+INSERT INTO CHAR_TBL (f1) VALUES ('a');
+INSERT INTO CHAR_TBL (f1) VALUES ('ab');
+INSERT INTO CHAR_TBL (f1) VALUES ('abcd');
+INSERT INTO CHAR_TBL (f1) VALUES ('abcde');
+ERROR:  value too long for type character(4)
+INSERT INTO CHAR_TBL (f1) VALUES ('abcd    ');
+SELECT '' AS four, CHAR_TBL.*;
+ four |  f1  
+------+------
+      | a   
+      | ab  
+      | abcd
+      | abcd
+(4 rows)
+

src/test/regress/expected/select_having_1.out

@@ -0,0 +1,41 @@
+--
+-- SELECT_HAVING
+--
+-- load test data
+CREATE TABLE test_having (a int, b int, c char(8), d char);
+INSERT INTO test_having VALUES (0, 1, 'XXXX', 'A');
+INSERT INTO test_having VALUES (1, 2, 'AAAA', 'b');
+INSERT INTO test_having VALUES (2, 2, 'AAAA', 'c');
+INSERT INTO test_having VALUES (3, 3, 'BBBB', 'D');
+INSERT INTO test_having VALUES (4, 3, 'BBBB', 'e');
+INSERT INTO test_having VALUES (5, 3, 'bbbb', 'F');
+INSERT INTO test_having VALUES (6, 4, 'cccc', 'g');
+INSERT INTO test_having VALUES (7, 4, 'cccc', 'h');
+INSERT INTO test_having VALUES (8, 4, 'CCCC', 'I');
+INSERT INTO test_having VALUES (9, 4, 'CCCC', 'j');
+SELECT b, c FROM test_having
+	GROUP BY b, c HAVING count(*) = 1;
+ b |    c     
+---+----------
+ 1 | XXXX    
+ 3 | bbbb    
+(2 rows)
+
+SELECT lower(c), count(c) FROM test_having
+	GROUP BY lower(c) HAVING count(*) > 2 OR min(a) = max(a);
+  lower   | count 
+----------+-------
+ bbbb     |     3
+ cccc     |     4
+ xxxx     |     1
+(3 rows)
+
+SELECT c, max(a) FROM test_having
+	GROUP BY c HAVING count(*) > 2 OR min(a) = max(a);
+    c     | max 
+----------+-----
+ bbbb     |   5
+ XXXX     |   0
+(2 rows)
+
+DROP TABLE test_having;

src/test/regress/expected/select_implicit_1.out

@@ -0,0 +1,320 @@
+--
+-- SELECT_IMPLICIT
+-- Test cases for queries with ordering terms missing from the target list.
+-- This used to be called "junkfilter.sql".
+-- The parser uses the term "resjunk" to handle these cases.
+-- - thomas 1998-07-09
+--
+-- load test data
+CREATE TABLE test_missing_target (a int, b int, c char(8), d char);
+INSERT INTO test_missing_target VALUES (0, 1, 'XXXX', 'A');
+INSERT INTO test_missing_target VALUES (1, 2, 'AAAA', 'b');
+INSERT INTO test_missing_target VALUES (2, 2, 'AAAA', 'c');
+INSERT INTO test_missing_target VALUES (3, 3, 'BBBB', 'D');
+INSERT INTO test_missing_target VALUES (4, 3, 'BBBB', 'e');
+INSERT INTO test_missing_target VALUES (5, 3, 'bbbb', 'F');
+INSERT INTO test_missing_target VALUES (6, 4, 'cccc', 'g');
+INSERT INTO test_missing_target VALUES (7, 4, 'cccc', 'h');
+INSERT INTO test_missing_target VALUES (8, 4, 'CCCC', 'I');
+INSERT INTO test_missing_target VALUES (9, 4, 'CCCC', 'j');
+--   w/ existing GROUP BY target
+SELECT c, count(*) FROM test_missing_target GROUP BY test_missing_target.c;
+    c     | count 
+----------+-------
+ AAAA     |     2
+ bbbb     |     1
+ BBBB     |     2
+ cccc     |     2
+ CCCC     |     2
+ XXXX     |     1
+(6 rows)
+
+--   w/o existing GROUP BY target using a relation name in GROUP BY clause
+SELECT count(*) FROM test_missing_target GROUP BY test_missing_target.c;
+ count 
+-------
+     2
+     1
+     2
+     2
+     2
+     1
+(6 rows)
+
+--   w/o existing GROUP BY target and w/o existing a different ORDER BY target
+--   failure expected
+SELECT count(*) FROM test_missing_target GROUP BY a ORDER BY b;
+ERROR:  Attribute test_missing_target.b must be GROUPed or used in an aggregate function
+--   w/o existing GROUP BY target and w/o existing same ORDER BY target
+SELECT count(*) FROM test_missing_target GROUP BY b ORDER BY b;
+ count 
+-------
+     1
+     2
+     3
+     4
+(4 rows)
+
+--   w/ existing GROUP BY target using a relation name in target
+SELECT test_missing_target.b, count(*)
+  FROM test_missing_target GROUP BY b ORDER BY b;
+ b | count 
+---+-------
+ 1 |     1
+ 2 |     2
+ 3 |     3
+ 4 |     4
+(4 rows)
+
+--   w/o existing GROUP BY target
+SELECT c FROM test_missing_target ORDER BY a;
+    c     
+----------
+ XXXX    
+ AAAA    
+ AAAA    
+ BBBB    
+ BBBB    
+ bbbb    
+ cccc    
+ cccc    
+ CCCC    
+ CCCC    
+(10 rows)
+
+--   w/o existing ORDER BY target
+SELECT count(*) FROM test_missing_target GROUP BY b ORDER BY b desc;
+ count 
+-------
+     4
+     3
+     2
+     1
+(4 rows)
+
+--   group using reference number
+SELECT count(*) FROM test_missing_target ORDER BY 1 desc;
+ count 
+-------
+    10
+(1 row)
+
+--   order using reference number
+SELECT c, count(*) FROM test_missing_target GROUP BY 1;
+    c     | count 
+----------+-------
+ AAAA     |     2
+ bbbb     |     1
+ BBBB     |     2
+ cccc     |     2
+ CCCC     |     2
+ XXXX     |     1
+(6 rows)
+
+--   group using reference number out of range
+--   failure expected
+SELECT c, count(*) FROM test_missing_target GROUP BY 3;
+ERROR:  GROUP BY position 3 is not in target list
+--   group w/o existing GROUP BY and ORDER BY target under ambiguous condition
+--   failure expected
+SELECT count(*) FROM test_missing_target x, test_missing_target y 
+	WHERE x.a = y.a
+	GROUP BY b ORDER BY b;
+ERROR:  Column reference "b" is ambiguous
+--   order w/ target under ambiguous condition
+--   failure NOT expected
+SELECT a, a FROM test_missing_target
+	ORDER BY a;
+ a | a 
+---+---
+ 0 | 0
+ 1 | 1
+ 2 | 2
+ 3 | 3
+ 4 | 4
+ 5 | 5
+ 6 | 6
+ 7 | 7
+ 8 | 8
+ 9 | 9
+(10 rows)
+
+--   order expression w/ target under ambiguous condition
+--   failure NOT expected
+SELECT a/2, a/2 FROM test_missing_target
+	ORDER BY a/2;
+ ?column? | ?column? 
+----------+----------
+        0 |        0
+        0 |        0
+        1 |        1
+        1 |        1
+        2 |        2
+        2 |        2
+        3 |        3
+        3 |        3
+        4 |        4
+        4 |        4
+(10 rows)
+
+--   group expression w/ target under ambiguous condition
+--   failure NOT expected
+SELECT a/2, a/2 FROM test_missing_target
+	GROUP BY a/2;
+ ?column? | ?column? 
+----------+----------
+        0 |        0
+        1 |        1
+        2 |        2
+        3 |        3
+        4 |        4
+(5 rows)
+
+--   group w/ existing GROUP BY target under ambiguous condition
+SELECT x.b, count(*) FROM test_missing_target x, test_missing_target y 
+	WHERE x.a = y.a
+	GROUP BY x.b;
+ b | count 
+---+-------
+ 1 |     1
+ 2 |     2
+ 3 |     3
+ 4 |     4
+(4 rows)
+
+--   group w/o existing GROUP BY target under ambiguous condition
+SELECT count(*) FROM test_missing_target x, test_missing_target y 
+	WHERE x.a = y.a
+	GROUP BY x.b;
+ count 
+-------
+     1
+     2
+     3
+     4
+(4 rows)
+
+--   group w/o existing GROUP BY target under ambiguous condition
+--   into a table
+SELECT count(*) INTO TABLE test_missing_target2 
+FROM test_missing_target x, test_missing_target y 
+	WHERE x.a = y.a
+	GROUP BY x.b;
+SELECT * FROM test_missing_target2;
+ count 
+-------
+     1
+     2
+     3
+     4
+(4 rows)
+
+--  Functions and expressions
+--   w/ existing GROUP BY target
+SELECT a%2, count(b) FROM test_missing_target GROUP BY test_missing_target.a%2;
+ ?column? | count 
+----------+-------
+        0 |     5
+        1 |     5
+(2 rows)
+
+--   w/o existing GROUP BY target using a relation name in GROUP BY clause
+SELECT count(c) FROM test_missing_target GROUP BY lower(test_missing_target.c);
+ count 
+-------
+     2
+     3
+     4
+     1
+(4 rows)
+
+--   w/o existing GROUP BY target and w/o existing a different ORDER BY target
+--   failure expected
+SELECT count(a) FROM test_missing_target GROUP BY a ORDER BY b;
+ERROR:  Attribute test_missing_target.b must be GROUPed or used in an aggregate function
+--   w/o existing GROUP BY target and w/o existing same ORDER BY target
+SELECT count(b) FROM test_missing_target GROUP BY b/2 ORDER BY b/2;
+ count 
+-------
+     1
+     5
+     4
+(3 rows)
+
+--   w/ existing GROUP BY target using a relation name in target
+SELECT lower(test_missing_target.c), count(c)
+  FROM test_missing_target GROUP BY lower(c) ORDER BY lower(c);
+  lower   | count 
+----------+-------
+ aaaa     |     2
+ bbbb     |     3
+ cccc     |     4
+ xxxx     |     1
+(4 rows)
+
+--   w/o existing GROUP BY target
+SELECT a FROM test_missing_target ORDER BY upper(d);
+ a 
+---
+ 0
+ 1
+ 2
+ 3
+ 4
+ 5
+ 6
+ 7
+ 8
+ 9
+(10 rows)
+
+--   w/o existing ORDER BY target
+SELECT count(b) FROM test_missing_target
+	GROUP BY (b + 1) / 2 ORDER BY (b + 1) / 2 desc;
+ count 
+-------
+     7
+     3
+(2 rows)
+
+--   group w/o existing GROUP BY and ORDER BY target under ambiguous condition
+--   failure expected
+SELECT count(x.a) FROM test_missing_target x, test_missing_target y 
+	WHERE x.a = y.a
+	GROUP BY b/2 ORDER BY b/2;
+ERROR:  Column reference "b" is ambiguous
+--   group w/ existing GROUP BY target under ambiguous condition
+SELECT x.b/2, count(x.b) FROM test_missing_target x, test_missing_target y 
+	WHERE x.a = y.a
+	GROUP BY x.b/2;
+ ?column? | count 
+----------+-------
+        0 |     1
+        1 |     5
+        2 |     4
+(3 rows)
+
+--   group w/o existing GROUP BY target under ambiguous condition
+--   failure expected due to ambiguous b in count(b)
+SELECT count(b) FROM test_missing_target x, test_missing_target y 
+	WHERE x.a = y.a
+	GROUP BY x.b/2;
+ERROR:  Column reference "b" is ambiguous
+--   group w/o existing GROUP BY target under ambiguous condition
+--   into a table
+SELECT count(x.b) INTO TABLE test_missing_target3 
+FROM test_missing_target x, test_missing_target y 
+	WHERE x.a = y.a
+	GROUP BY x.b/2;
+SELECT * FROM test_missing_target3;
+ count 
+-------
+     1
+     5
+     4
+(3 rows)
+
+--   Cleanup
+DROP TABLE test_missing_target;
+DROP TABLE test_missing_target2;
+DROP TABLE test_missing_target3;

src/test/regress/expected/varchar_1.out

@@ -0,0 +1,111 @@
+--
+-- VARCHAR
+--
+CREATE TABLE VARCHAR_TBL(f1 varchar(1));
+INSERT INTO VARCHAR_TBL (f1) VALUES ('a');
+INSERT INTO VARCHAR_TBL (f1) VALUES ('A');
+-- any of the following three input formats are acceptable 
+INSERT INTO VARCHAR_TBL (f1) VALUES ('1');
+INSERT INTO VARCHAR_TBL (f1) VALUES (2);
+INSERT INTO VARCHAR_TBL (f1) VALUES ('3');
+-- zero-length char 
+INSERT INTO VARCHAR_TBL (f1) VALUES ('');
+-- try varchar's of greater than 1 length 
+INSERT INTO VARCHAR_TBL (f1) VALUES ('cd');
+ERROR:  value too long for type character varying(1)
+INSERT INTO VARCHAR_TBL (f1) VALUES ('c     ');
+SELECT '' AS seven, VARCHAR_TBL.*;
+ seven | f1 
+-------+----
+       | a
+       | A
+       | 1
+       | 2
+       | 3
+       | 
+       | c
+(7 rows)
+
+SELECT '' AS six, c.*
+   FROM VARCHAR_TBL c
+   WHERE c.f1 <> 'a';
+ six | f1 
+-----+----
+     | A
+     | 1
+     | 2
+     | 3
+     | 
+     | c
+(6 rows)
+
+SELECT '' AS one, c.*
+   FROM VARCHAR_TBL c
+   WHERE c.f1 = 'a';
+ one | f1 
+-----+----
+     | a
+(1 row)
+
+SELECT '' AS five, c.*
+   FROM VARCHAR_TBL c
+   WHERE c.f1 < 'a';
+ five | f1 
+------+----
+      | 1
+      | 2
+      | 3
+      | 
+(4 rows)
+
+SELECT '' AS six, c.*
+   FROM VARCHAR_TBL c
+   WHERE c.f1 <= 'a';
+ six | f1 
+-----+----
+     | a
+     | 1
+     | 2
+     | 3
+     | 
+(5 rows)
+
+SELECT '' AS one, c.*
+   FROM VARCHAR_TBL c
+   WHERE c.f1 > 'a';
+ one | f1 
+-----+----
+     | A
+     | c
+(2 rows)
+
+SELECT '' AS two, c.*
+   FROM VARCHAR_TBL c
+   WHERE c.f1 >= 'a';
+ two | f1 
+-----+----
+     | a
+     | A
+     | c
+(3 rows)
+
+DROP TABLE VARCHAR_TBL;
+--
+-- Now test longer arrays of char
+--
+CREATE TABLE VARCHAR_TBL(f1 varchar(4));
+INSERT INTO VARCHAR_TBL (f1) VALUES ('a');
+INSERT INTO VARCHAR_TBL (f1) VALUES ('ab');
+INSERT INTO VARCHAR_TBL (f1) VALUES ('abcd');
+INSERT INTO VARCHAR_TBL (f1) VALUES ('abcde');
+ERROR:  value too long for type character varying(4)
+INSERT INTO VARCHAR_TBL (f1) VALUES ('abcd    ');
+SELECT '' AS four, VARCHAR_TBL.*;
+ four |  f1  
+------+------
+      | a
+      | ab
+      | abcd
+      | abcd
+(4 rows)
+

src/test/regress/pg_regress.sh

@@ -1,5 +1,5 @@
 #! /bin/sh
-# $Header: /cvsroot/pgsql/src/test/regress/Attic/pg_regress.sh,v 1.24 2002/04/24 01:56:20 momjian Exp $
+# $Header: /cvsroot/pgsql/src/test/regress/Attic/pg_regress.sh,v 1.25 2002/05/14 13:05:43 petere Exp $
 
 me=`basename $0`
 : ${TMPDIR=/tmp}
@@ -451,6 +451,16 @@ if [ $? -ne 0 ]; then
     (exit 2); exit
 fi
 
+"$bindir/psql" $psql_options -c "\
+alter database \"$dbname\" set lc_messages to 'C';
+alter database \"$dbname\" set lc_monetary to 'C';
+alter database \"$dbname\" set lc_numeric to 'C';
+alter database \"$dbname\" set lc_time to 'C';" "$dbname" 2>/dev/null
+if [ $? -ne 0 ]; then
+    echo "$me: could not set database default locales"
+    (exit 2); exit
+fi
+
 
 # ----------
 # Remove regressuser* and regressgroup* user accounts.
@@ -559,22 +569,44 @@ do
         # to a system-specific expected file.
         # There shouldn't be multiple matches, but take the last if there are.
 
-        EXPECTED="$inputdir/expected/${name}.out"
+        EXPECTED="$inputdir/expected/${name}"
         for LINE in $SUBSTLIST
         do
             if [ `expr "$LINE" : "$name="` -ne 0 ]
             then
                 SUBST=`echo "$LINE" | sed 's/^.*=//'`
-                EXPECTED="$inputdir/expected/${SUBST}.out"
+                EXPECTED="$inputdir/expected/${SUBST}"
             fi
         done
 
-        diff $DIFFFLAGS $EXPECTED $outputdir/results/${name}.out >/dev/null 2>&1
+        # If there are multiple equally valid result file, loop to get the right one.
-        case $? in
+        # If none match, diff against the closet one.
+
+        bestfile=
+        bestdiff=
+        result=2
+        for thisfile in $EXPECTED.out ${EXPECTED}_[0-9].out; do
+            [ ! -r "$thisfile" ] && continue
+            diff $DIFFFLAGS $thisfile $outputdir/results/${name}.out >/dev/null 2>&1
+            result=$?
+            case $result in
+                0) break;;
+                1) thisdiff=`diff $DIFFFLAGS $thisfile $outputdir/results/${name}.out | wc -l`
+                   if [ -z "$bestdiff" ] || [ "$thisdiff" -lt "$bestdiff" ]; then
+                       bestdiff=$thisdiff; bestfile=$thisfile
+                   fi
+                   continue;;
+                2) break;;
+            esac
+        done
+
+        # Now print the result.
+
+        case $result in
             0)
                 echo "ok";;
             1)
-                ( diff $DIFFFLAGS -C3 $EXPECTED $outputdir/results/${name}.out
+                ( diff $DIFFFLAGS -C3 $bestfile $outputdir/results/${name}.out
                   echo
                   echo "======================================================================"
                   echo ) >> "$diff_file"