Run pgperltidy

This is required before the creation of a new branch.  pgindent is
clean, as well as is reformat-dat-files.

perltidy version is v20230309, as documented in pgindent's README.

src/bin/pg_basebackup/t/040_pg_createsubscriber.pl

@@ -289,10 +289,13 @@ $node_p->restart;
 # Create failover slot to test its removal
 my $fslotname = 'failover_slot';
 $node_p->safe_psql($db1,
-	"SELECT pg_create_logical_replication_slot('$fslotname', 'pgoutput', false, false, true)");
+	"SELECT pg_create_logical_replication_slot('$fslotname', 'pgoutput', false, false, true)"
+);
 $node_s->start;
 $node_s->safe_psql('postgres', "SELECT pg_sync_replication_slots()");
-my $result = $node_s->safe_psql('postgres', "SELECT slot_name FROM pg_replication_slots WHERE slot_name = '$fslotname' AND synced AND NOT temporary");
+my $result = $node_s->safe_psql('postgres',
+	"SELECT slot_name FROM pg_replication_slots WHERE slot_name = '$fslotname' AND synced AND NOT temporary"
+);
 is($result, 'failover_slot', 'failover slot is synced');
 $node_s->stop;
 
@@ -381,7 +384,8 @@ $node_s->wait_for_subscription_sync($node_p, $subnames[1]);
 
 # Confirm the failover slot has been removed
 $result = $node_s->safe_psql($db1,
-	"SELECT count(*) FROM pg_replication_slots WHERE slot_name = '$fslotname'");
+	"SELECT count(*) FROM pg_replication_slots WHERE slot_name = '$fslotname'"
+);
 is($result, qq(0), 'failover slot was removed');
 
 # Check result on database $db1

src/bin/pg_combinebackup/t/003_timeline.pl

@@ -72,7 +72,8 @@ $node2->command_ok(
 
 # Restore the incremental backup and use it to create a new node.
 my $node3 = PostgreSQL::Test::Cluster->new('node3');
-$node3->init_from_backup($node1, 'backup3',
+$node3->init_from_backup(
+	$node1, 'backup3',
 	combine_with_prior => [ 'backup1', 'backup2' ],
 	combine_mode => $mode);
 $node3->start();

src/bin/pg_combinebackup/t/004_manifest.pl

@@ -58,7 +58,8 @@ sub combine_and_test_one_backup
 combine_and_test_one_backup('nomanifest',
 	qr/could not open file.*backup_manifest/,
 	'--no-manifest');
-combine_and_test_one_backup('csum_none', undef, '--manifest-checksums=NONE', $mode);
+combine_and_test_one_backup('csum_none', undef, '--manifest-checksums=NONE',
+	$mode);
 combine_and_test_one_backup('csum_sha224',
 	undef, '--manifest-checksums=SHA224', $mode);
 

src/bin/pg_combinebackup/t/005_integrity.pl

@@ -84,13 +84,19 @@ my $resultpath = $node1->backup_dir . '/result';
 
 # Can't combine 2 full backups.
 $node1->command_fails_like(
-	[ 'pg_combinebackup', $backup1path, $backup1path, '-o', $resultpath, $mode ],
+	[
+		'pg_combinebackup', $backup1path, $backup1path, '-o',
+		$resultpath, $mode
+	],
 	qr/is a full backup, but only the first backup should be a full backup/,
 	"can't combine full backups");
 
 # Can't combine 2 incremental backups.
 $node1->command_fails_like(
-	[ 'pg_combinebackup', $backup2path, $backup2path, '-o', $resultpath, $mode ],
+	[
+		'pg_combinebackup', $backup2path, $backup2path, '-o',
+		$resultpath, $mode
+	],
 	qr/is an incremental backup, but the first backup should be a full backup/,
 	"can't combine full backups");
 
@@ -121,7 +127,10 @@ move("$backup2path/backup_manifest.orig", "$backup2path/backup_manifest")
 
 # Can't omit a required backup.
 $node1->command_fails_like(
-	[ 'pg_combinebackup', $backup1path, $backup3path, '-o', $resultpath, $mode ],
+	[
+		'pg_combinebackup', $backup1path, $backup3path, '-o',
+		$resultpath, $mode
+	],
 	qr/starts at LSN.*but expected/,
 	"can't omit a required backup");
 
@@ -154,13 +163,21 @@ $node1->command_ok(
 
 # Can combine result of previous step with second incremental.
 $node1->command_ok(
-	[ 'pg_combinebackup', $synthetic12path, $backup3path, '-o', $resultpath, $mode ],
+	[
+		'pg_combinebackup', $synthetic12path,
+		$backup3path, '-o',
+		$resultpath, $mode
+	],
 	"can combine synthetic backup with later incremental");
 rmtree($resultpath);
 
 # Can't combine result of 1+2 with 2.
 $node1->command_fails_like(
-	[ 'pg_combinebackup', $synthetic12path, $backup2path, '-o', $resultpath, $mode ],
+	[
+		'pg_combinebackup', $synthetic12path,
+		$backup2path, '-o',
+		$resultpath, $mode
+	],
 	qr/starts at LSN.*but expected/,
 	"can't combine synthetic backup with included incremental");
 

src/bin/pg_combinebackup/t/006_db_file_copy.pl

@@ -49,7 +49,8 @@ $primary->command_ok(
 
 # Recover the incremental backup.
 my $restore = PostgreSQL::Test::Cluster->new('restore');
-$restore->init_from_backup($primary, 'backup2',
+$restore->init_from_backup(
+	$primary, 'backup2',
 	combine_with_prior => ['backup1'],
 	combine_mode => $mode);
 $restore->start();

src/bin/pg_rewind/t/003_extrafiles.pl

@@ -55,8 +55,8 @@ sub run_test
 	  "$test_standby_datadir/tst_standby_dir/standby_subdir/standby_file4",
 	  "in standby4";
 	# Skip testing .DS_Store files on macOS to avoid risk of side effects
-	append_to_file
-	  "$test_standby_datadir/tst_standby_dir/.DS_Store", "macOS system file"
+	append_to_file "$test_standby_datadir/tst_standby_dir/.DS_Store",
+	  "macOS system file"
 	  unless ($Config{osname} eq 'darwin');
 
 	mkdir "$test_primary_datadir/tst_primary_dir";

src/bin/pg_verifybackup/t/003_corruption.pl

@@ -108,8 +108,8 @@ for my $scenario (@scenario)
   SKIP:
 	{
 		skip "unix-style permissions not supported on Windows", 4
-		  if ($scenario->{'skip_on_windows'} &&
-			  ($windows_os || $Config::Config{osname} eq 'cygwin'));
+		  if ($scenario->{'skip_on_windows'}
+			&& ($windows_os || $Config::Config{osname} eq 'cygwin'));
 
 		# Take a backup and check that it verifies OK.
 		my $backup_path = $primary->backup_dir . '/' . $name;

src/test/recovery/t/009_twophase.pl

@@ -330,30 +330,32 @@ $cur_primary->stop;
 $cur_standby->restart;
 
 # Acquire a snapshot in standby, before we commit the prepared transaction
-my $standby_session = $cur_standby->background_psql('postgres', on_error_die => 1);
+my $standby_session =
+  $cur_standby->background_psql('postgres', on_error_die => 1);
 $standby_session->query_safe("BEGIN ISOLATION LEVEL REPEATABLE READ");
-$psql_out = $standby_session->query_safe(
-	"SELECT count(*) FROM t_009_tbl_standby_mvcc");
+$psql_out =
+  $standby_session->query_safe("SELECT count(*) FROM t_009_tbl_standby_mvcc");
 is($psql_out, '0',
 	"Prepared transaction not visible in standby before commit");
 
 # Commit the transaction in primary
 $cur_primary->start;
-$cur_primary->psql('postgres', "
+$cur_primary->psql(
+	'postgres', "
 SET synchronous_commit='remote_apply'; -- To ensure the standby is caught up
 COMMIT PREPARED 'xact_009_standby_mvcc';
 ");
 
 # Still not visible to the old snapshot
-$psql_out = $standby_session->query_safe(
-	"SELECT count(*) FROM t_009_tbl_standby_mvcc");
+$psql_out =
+  $standby_session->query_safe("SELECT count(*) FROM t_009_tbl_standby_mvcc");
 is($psql_out, '0',
 	"Committed prepared transaction not visible to old snapshot in standby");
 
 # Is visible to a new snapshot
 $standby_session->query_safe("COMMIT");
-$psql_out = $standby_session->query_safe(
-	"SELECT count(*) FROM t_009_tbl_standby_mvcc");
+$psql_out =
+  $standby_session->query_safe("SELECT count(*) FROM t_009_tbl_standby_mvcc");
 is($psql_out, '2',
 	"Committed prepared transaction is visible to new snapshot in standby");
 $standby_session->quit;