doc: use wording "restore" instead of "reload" of dumps

Reported-by: axel.kluener@gmail.com

Discussion: https://postgr.es/m/164736074430.660.3645615289283943146@wrigleys.postgresql.org

Backpatch-through: 11

doc/src/sgml/ddl.sgml

@@ -557,7 +557,7 @@ CREATE TABLE products (
      tests, it cannot guarantee that the database will not reach a state
      in which the constraint condition is false (due to subsequent changes
      of the other row(s) involved).  This would cause a database dump and
-     reload to fail.  The reload could fail even when the complete
+     restore to fail.  The restore could fail even when the complete
      database state is consistent with the constraint, due to rows not
      being loaded in an order that will satisfy the constraint.  If
      possible, use <literal>UNIQUE</literal>, <literal>EXCLUDE</literal>,
@@ -569,10 +569,10 @@ CREATE TABLE products (
      If what you desire is a one-time check against other rows at row
      insertion, rather than a continuously-maintained consistency
      guarantee, a custom <link linkend="triggers">trigger</link> can be used
-     to implement that.  (This approach avoids the dump/reload problem because
+     to implement that.  (This approach avoids the dump/restore problem because
      <application>pg_dump</application> does not reinstall triggers until after
-     reloading data, so that the check will not be enforced during a
-     dump/reload.)
+     restoring data, so that the check will not be enforced during a
+     dump/restore.)
     </para>
    </note>
 
@@ -594,7 +594,7 @@ CREATE TABLE products (
      function.  <productname>PostgreSQL</productname> does not disallow
      that, but it will not notice if there are rows in the table that now
      violate the <literal>CHECK</literal> constraint. That would cause a
-     subsequent database dump and reload to fail.
+     subsequent database dump and restore to fail.
      The recommended way to handle such a change is to drop the constraint
      (using <command>ALTER TABLE</command>), adjust the function definition,
      and re-add the constraint, thereby rechecking it against all table rows.

doc/src/sgml/extend.sgml

@@ -982,7 +982,7 @@ SET LOCAL search_path TO @extschema@, pg_temp;
      <application>pg_dump</application>.  But that behavior is undesirable for a
      configuration table; any data changes made by the user need to be
      included in dumps, or the extension will behave differently after a dump
-     and reload.
+     and restore.
     </para>
 
    <indexterm>

doc/src/sgml/perform.sgml

@@ -1785,7 +1785,7 @@ SELECT * FROM x, y, a, b, c WHERE something AND somethingelse;
 
    <para>
     Dump scripts generated by <application>pg_dump</application> automatically apply
-    several, but not all, of the above guidelines.  To reload a
+    several, but not all, of the above guidelines.  To restore a
     <application>pg_dump</application> dump as quickly as possible, you need to
     do a few extra things manually.  (Note that these points apply while
     <emphasis>restoring</emphasis> a dump, not while <emphasis>creating</emphasis> it.

doc/src/sgml/plhandler.sgml

@@ -156,7 +156,7 @@
     attached to a function when <varname>check_function_bodies</varname> is on.
     Therefore, checks whose results might be affected by GUC parameters
     definitely should be skipped when <varname>check_function_bodies</varname> is
-    off, to avoid false failures when reloading a dump.
+    off, to avoid false failures when restoring a dump.
    </para>
 
    <para>

doc/src/sgml/ref/alter_type.sgml

@@ -411,7 +411,7 @@ ALTER TYPE <replaceable class="parameter">name</replaceable> SET ( <replaceable
    around</quote> since the original creation of the enum type).  The slowdown is
    usually insignificant; but if it matters, optimal performance can be
    regained by dropping and recreating the enum type, or by dumping and
-   reloading the database.
+   restoring the database.
   </para>
  </refsect1>
 

doc/src/sgml/ref/create_domain.sgml

@@ -234,7 +234,7 @@ INSERT INTO tab (domcol) VALUES ((SELECT domcol FROM tab WHERE false));
    function.  <productname>PostgreSQL</productname> does not disallow that,
    but it will not notice if there are stored values of the domain type that
    now violate the <literal>CHECK</literal> constraint. That would cause a
-   subsequent database dump and reload to fail.  The recommended way to
+   subsequent database dump and restore to fail.  The recommended way to
    handle such a change is to drop the constraint (using <command>ALTER
    DOMAIN</command>), adjust the function definition, and re-add the
    constraint, thereby rechecking it against stored data.

doc/src/sgml/ref/pg_dump.sgml

@@ -684,7 +684,7 @@ PostgreSQL documentation
         ...</literal>).  This will make restoration very slow; it is mainly
         useful for making dumps that can be loaded into
         non-<productname>PostgreSQL</productname> databases.
-        Any error during reloading will cause only rows that are part of the
+        Any error during restoring will cause only rows that are part of the
         problematic <command>INSERT</command> to be lost, rather than the
         entire table contents.
        </para>
@@ -708,9 +708,9 @@ PostgreSQL documentation
         This option is relevant only when creating a data-only dump.
         It instructs <application>pg_dump</application> to include commands
         to temporarily disable triggers on the target tables while
-        the data is reloaded.  Use this if you have referential
+        the data is restored.  Use this if you have referential
         integrity checks or other triggers on the tables that you
-        do not want to invoke during data reload.
+        do not want to invoke during data restore.
        </para>
 
        <para>
@@ -828,7 +828,7 @@ PostgreSQL documentation
         than <command>COPY</command>).  This will make restoration very slow;
         it is mainly useful for making dumps that can be loaded into
         non-<productname>PostgreSQL</productname> databases.
-        Any error during reloading will cause only rows that are part of the
+        Any error during restoring will cause only rows that are part of the
         problematic <command>INSERT</command> to be lost, rather than the
         entire table contents.  Note that the restore might fail altogether if
         you have rearranged column order.  The
@@ -847,7 +847,7 @@ PostgreSQL documentation
         target the root of the partitioning hierarchy that contains it, rather
         than the partition itself.  This causes the appropriate partition to
         be re-determined for each row when the data is loaded.  This may be
-        useful when reloading data on a server where rows do not always fall
+        useful when restoring data on a server where rows do not always fall
         into the same partitions as they did on the original server.  That
         could happen, for example, if the partitioning column is of type text
         and the two systems have different definitions of the collation used
@@ -859,7 +859,7 @@ PostgreSQL documentation
         with this option, because <application>pg_restore</application> will
         not know exactly which partition(s) a given archive data item will
         load data into.  This could result in inefficiency due to lock
-        conflicts between parallel jobs, or perhaps even reload failures due
+        conflicts between parallel jobs, or perhaps even restore failures due
         to foreign key constraints being set up before all the relevant data
         is loaded.
        </para>
@@ -1028,7 +1028,7 @@ PostgreSQL documentation
         Dump data as <command>INSERT</command> commands (rather than
         <command>COPY</command>).  Controls the maximum number of rows per
         <command>INSERT</command> command. The value specified must be a
-        number greater than zero.  Any error during reloading will cause only
+        number greater than zero.  Any error during restoring will cause only
         rows that are part of the problematic <command>INSERT</command> to be
         lost, rather than the entire table contents.
        </para>

doc/src/sgml/ref/pg_dumpall.sgml

@@ -276,9 +276,9 @@ PostgreSQL documentation
         This option is relevant only when creating a data-only dump.
         It instructs <application>pg_dumpall</application> to include commands
         to temporarily disable triggers on the target tables while
-        the data is reloaded.  Use this if you have referential
+        the data is restored.  Use this if you have referential
         integrity checks or other triggers on the tables that you
-        do not want to invoke during data reload.
+        do not want to invoke during data restore.
        </para>
 
        <para>
@@ -355,7 +355,7 @@ PostgreSQL documentation
         target the root of the partitioning hierarchy that contains it, rather
         than the partition itself.  This causes the appropriate partition to
         be re-determined for each row when the data is loaded.  This may be
-        useful when reloading data on a server where rows do not always fall
+        useful when restoring data on a server where rows do not always fall
         into the same partitions as they did on the original server.  That
         could happen, for example, if the partitioning column is of type text
         and the two systems have different definitions of the collation used
@@ -530,7 +530,7 @@ PostgreSQL documentation
         Dump data as <command>INSERT</command> commands (rather than
         <command>COPY</command>).  Controls the maximum number of rows per
         <command>INSERT</command> command. The value specified must be a
-        number greater than zero.  Any error during reloading will cause only
+        number greater than zero.  Any error during restoring will cause only
         rows that are part of the problematic <command>INSERT</command> to be
         lost, rather than the entire table contents.
        </para>
@@ -799,7 +799,7 @@ PostgreSQL documentation
   </para>
 
   <para>
-   To reload database(s) from this file, you can use:
+   To restore database(s) from this file, you can use:
 <screen>
 <prompt>$</prompt> <userinput>psql -f db.out postgres</userinput>
 </screen>

doc/src/sgml/ref/pg_resetwal.sgml

@@ -55,7 +55,7 @@ PostgreSQL documentation
    After running this command, it should be possible to start the server,
    but bear in mind that the database might contain inconsistent data due to
    partially-committed transactions.  You should immediately dump your data,
-   run <command>initdb</command>, and reload.  After reload, check for
+   run <command>initdb</command>, and restore.  After restore, check for
    inconsistencies and repair as needed.
   </para>
 
@@ -78,7 +78,7 @@ PostgreSQL documentation
    discussed below. If you are not able to determine correct values for all
    these fields, <option>-f</option> can still be used, but
    the recovered database must be treated with even more suspicion than
-   usual: an immediate dump and reload is imperative.  <emphasis>Do not</emphasis>
+   usual: an immediate dump and restore is imperative.  <emphasis>Do not</emphasis>
    execute any data-modifying operations in the database before you dump,
    as any such action is likely to make the corruption worse.
   </para>

doc/src/sgml/ref/pg_restore.sgml

@@ -538,9 +538,9 @@ PostgreSQL documentation
         This option is relevant only when performing a data-only restore.
         It instructs <application>pg_restore</application> to execute commands
         to temporarily disable triggers on the target tables while
-        the data is reloaded.  Use this if you have referential
+        the data is restored.  Use this if you have referential
         integrity checks or other triggers on the tables that you
-        do not want to invoke during data reload.
+        do not want to invoke during data restore.
        </para>
 
        <para>
@@ -969,7 +969,7 @@ CREATE DATABASE foo WITH TEMPLATE template0;
   </para>
 
   <para>
-   To reload the dump into a new database called <literal>newdb</literal>:
+   To restore the dump into a new database called <literal>newdb</literal>:
 
 <screen>
 <prompt>$</prompt> <userinput>createdb -T template0 newdb</userinput>

doc/src/sgml/ref/pgupgrade.sgml

@@ -39,7 +39,7 @@ PostgreSQL documentation
  <para>
   <application>pg_upgrade</application> (formerly called <application>pg_migrator</application>) allows data
   stored in <productname>PostgreSQL</productname> data files to be upgraded to a later <productname>PostgreSQL</productname>
-  major version without the data dump/reload typically required for
+  major version without the data dump/restore typically required for
   major version upgrades, e.g., from 9.5.8 to 9.6.4 or from 10.7 to 11.2.
   It is not required for minor version upgrades, e.g., from 9.6.2 to 9.6.3
   or from 10.1 to 10.2.
@@ -420,7 +420,7 @@ NET STOP postgresql-&majorversion;
 
     <para>
      The <option>--jobs</option> option allows multiple CPU cores to be used
-     for copying/linking of files and to dump and reload database schemas
+     for copying/linking of files and to dump and restore database schemas
      in parallel;  a good place to start is the maximum of the number of
      CPU cores and tablespaces.  This option can dramatically reduce the
      time to upgrade a multi-database server running on a multiprocessor

doc/src/sgml/runtime.sgml

@@ -1650,7 +1650,7 @@ $ <userinput>kill -INT `head -1 /usr/local/pgsql/data/postmaster.pid`</userinput
    For <emphasis>major</emphasis> releases of <productname>PostgreSQL</productname>, the
    internal data storage format is subject to change, thus complicating
    upgrades.  The traditional method for moving data to a new major version
-   is to dump and reload the database, though this can be slow.  A
+   is to dump and restore the database, though this can be slow.  A
    faster method is <xref linkend="pgupgrade"/>.  Replication methods are
    also available, as discussed below.
    (If you are using a pre-packaged version
@@ -1736,7 +1736,7 @@ $ <userinput>kill -INT `head -1 /usr/local/pgsql/data/postmaster.pid`</userinput
 
    <para>
     One upgrade method is to dump data from one major version of
-    <productname>PostgreSQL</productname> and reload it in another &mdash;  to do
+    <productname>PostgreSQL</productname> and restore it in another &mdash;  to do
     this, you must use a <emphasis>logical</emphasis> backup tool like
     <application>pg_dumpall</application>; file system
     level backup methods will not work. (There are checks in place that prevent

doc/src/sgml/textsearch.sgml

@@ -1974,7 +1974,7 @@ CREATE TRIGGER tsvectorupdate BEFORE INSERT OR UPDATE
     explicitly when creating <type>tsvector</type> values inside triggers,
     so that the column's contents will not be affected by changes to
     <varname>default_text_search_config</varname>.  Failure to do this is likely to
-    lead to problems such as search results changing after a dump and reload.
+    lead to problems such as search results changing after a dump and restore.
    </para>
 
   </sect2>