postgres_fdw commits remote (sub)transactions opened on remote server(s)
in a local (sub)transaction one by one when the local (sub)transaction
commits. This patch allows it to commit the remote (sub)transactions in
parallel to improve performance. This is enabled by the server option
"parallel_commit". The default is false.
Etsuro Fujita, reviewed by Fujii Masao and David Zhang.
Discussion: http://postgr.es/m/CAPmGK17dAZCXvwnfpr1eTfknTGdt%3DhYTV9405Gt5SqPOX8K84w%40mail.gmail.com
Commit 75d22069e tried to throw a warning for setting a custom GUC whose
prefix belongs to a previously-loaded extension, if there is no such GUC
defined by the extension. But that caused unstable behavior with
parallel workers, because workers don't necessarily load extensions and
GUCs in the same order their leader did. To make that work safely, we
have to completely disallow the case. We now actually remove any such
GUCs at the time of initial extension load, and then throw an error not
just a warning if you try to add one later. While this might create a
compatibility issue for a few people, the improvement in error-detection
capability seems worth it; it's hard to believe that there's any good
use-case for choosing such GUC names.
This also un-reverts 5609cc01c (Rename EmitWarningsOnPlaceholders() to
MarkGUCPrefixReserved()), since that function's old name is now even
more of a misnomer.
Florin Irion and Tom Lane
Discussion: https://postgr.es/m/1902182.1640711215@sss.pgh.pa.us
Commit 6e0cb3dec1 allowed postgres_fdw.application_name to include
escape sequences %a (application name), %d (database name), %u (user name)
and %p (pid). In addition to them, this commit makes it support
the escape sequences for session ID (%c) and cluster name (%C).
These are helpful to investigate where each remote transactions came from.
Author: Fujii Masao
Reviewed-by: Ryohei Takahashi, Kyotaro Horiguchi
Discussion: https://postgr.es/m/1041dc9a-c976-049f-9f14-e7d94c29c4b2@oss.nttdata.com
This routine is a no-op since dd04e95 from 2003, with a macro kept
around for compatibility purposes. This has led to the same code
patterns being copy-pasted around for no effect, sometimes in confusing
ways like in pg_logical_slot_get_changes_guts() from logical.c where the
code was actually incorrect.
This issue has been discussed on two different threads recently, so
rather than living with this legacy, remove any uses of this routine in
the C code to simplify things. The compatibility macro is kept to avoid
breaking any out-of-core modules that depend on it.
Reported-by: Tatsuhito Kasahara, Justin Pryzby
Author: Tatsuhito Kasahara
Discussion: https://postgr.es/m/20211217200419.GQ17618@telsasoft.com
Discussion: https://postgr.es/m/CAP0=ZVJeeYfAeRfmzqAF2Lumdiv4S4FewyBnZd4DPTrsSQKJKw@mail.gmail.com
Commit 27e1f1456 failed to process a pending asynchronous request made
for a given ForeignScan node in postgresReScanForeignScan() (if any) in
cases where we would only reset the next_tuple counter in that function,
contradicting the assumption that there should be no pending
asynchronous requests that have been made for async-capable subplans for
the parent Append node after ReScan. This led to an assert failure in
an assert-enabled build. I think this would also lead to mis-rewinding
the cursor in that function in the case where we have already fetched
one batch for the ForeignScan node and the asynchronous request has been
made for the second batch, because even in that case we would just reset
the counter when called from that function, so we would fail to execute
MOVE BACKWARD ALL.
To fix, modify that function to process the asynchronous request before
restarting the scan.
While at it, add a comment to a function to match other places.
Per bug #17344 from Alexander Lakhin. Back-patch to v14 where the
aforesaid commit came in.
Patch by me. Test case by Alexander Lakhin, adjusted by me. Reviewed
and tested by Alexander Lakhin and Dmitry Dolgov.
Discussion: https://postgr.es/m/17344-226b78b00de73a7e@postgresql.org
Commit 27e1f1456 resets the per-connection states of connections used to
scan foreign tables asynchronously during abort cleanup at main
transaction end, but it failed to do so during subabort cleanup at
subtransaction end, leading to a segmentation fault when re-executing an
asynchronous-foreign-table-scan query in a transaction that was
cancelled in a subtransaction of it.
Fix by modifying pgfdw_abort_cleanup() to reset the per-connection state
of a given connection also when called for subabort cleanup. Also,
modify that function to do the reset in both the abort-cleanup and
subabort-cleanup cases if necessary, to save cycles, and improve a
comment on it a little bit.
Back-patch to v14 where the aforesaid commit came in.
Reviewed by Alexander Pyhalov
Discussion: https://postgr.es/m/CAPmGK14cCV-JA7kNsyt2EUTKvZ4xkr2LNRthi1U1C3cqfGppAw@mail.gmail.com
Before, SQL-level boolean constants were represented by a string with
a cast, and internal Boolean values in DDL commands were usually
represented by Integer nodes. This takes the place of both of these
uses, making the intent clearer and having some amount of type safety.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8c1a2e37-c68d-703c-5a83-7a6077f4f997@enterprisedb.com
Commit 449ab63505 added postgres_fdw.application_name GUC that specifies
a value for application_name configuration parameter used when postgres_fdw
establishes a connection to a foreign server. Also commit 6e0cb3dec1
allowed it to include escape sequences. Both commits added the regression
tests for the GUC, but those tests were reverted by commits 98dbef90eb and
5e64ad3697 because they were unstable and caused some buildfarm members
to report the failure.
This is the third try to add the regression test for
postgres_fdw.application_name GUC.
One of issues to make the test unstable was to have used
postgres_fdw_disconnect_all() to close the existing remote connections.
The test expected that the remote connection and its corresponding backend
at the remote server disappeared just after postgres_fdw_disconnect_all()
was executed, but it could take a bit time for them to disappear.
To make sure that they exit, this commit makes the test use
pg_terminate_backend() with the timeout at the remote server, instead.
If the timeout is set to greater than zero, this function waits until
they are actually terminated (or until the given time has passed).
Another issue was that the test didn't take into consideration the case
where postgres_fdw.application_name containing some escape sequences was
converted to the string larger than NAMEDATALEN. In this case it was
truncated to less than NAMEDATALEN when it's passed to the remote server,
but the test expected wrongly that full string of application_name was
always viewable. This commit changes the test so that it can handle that case.
Author: Fujii Masao
Reviewed-by: Masahiko Sawada, Hayato Kuroda, Kyotaro Horiguchi
Discussion: https://postgr.es/m/3220909.1631054766@sss.pgh.pa.us
Discussion: https://postgr.es/m/20211224.180006.2247635208768233073.horikyota.ntt@gmail.com
Discussion: https://postgr.es/m/e7b61420-a97b-8246-77c4-a0d48fba5a45@oss.nttdata.com
This seems like a clearer name for what it does now.
Provide a compatibility macro so that extensions don't have to convert
to the new name right away.
Discussion: https://postgr.es/m/116024.1640111629@sss.pgh.pa.us
Commit 6e0cb3dec1 added the tests that check that escape sequences in
postgres_fdw.application_name setting are replaced with status information
expectedly. But they were unstable and caused some buildfarm
members to report the failure. This commit reverts those unstable tests.
application_name that used when postgres_fdw establishes a connection to
a foreign server can be specified in either or both a connection parameter
of a server object and GUC postgres_fdw.application_name. This commit
allows those parameters to include escape sequences that begins with
% character. Then postgres_fdw replaces those escape sequences with
status information. For example, %d and %u are replaced with user name
and database name in local server, respectively. This feature enables us
to add information more easily to track remote transactions or queries,
into application_name of a remote connection.
Author: Hayato Kuroda
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Hou Zhijie, Fujii Masao
Discussion: https://postgr.es/m/TYAPR01MB5866FAE71C66547C64616584F5EB9@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
One code path related to this flavor of ALTER TABLE was checking that
the relation to detach has to be a normal table or a partitioned table,
which would fail if using the command with a different relation kind.
Views, sequences and materialized views cannot be part of a partition
tree, so these would cause the command to fail anyway, but the assertion
was triggered. Foreign tables can be part of a partition tree, and
again the assertion would have failed. The simplest solution is just to
remove this assertion, so as we get the same failure as the
non-concurrent code path.
While on it, add a regression test in postgres_fdw for the concurrent
partition detach of a foreign table, as per a suggestion from Alexander
Lakhin.
Issue introduced in 71f4c8c.
Reported-by: Alexander Lakhin
Author: Michael Paquier, Alexander Lakhin
Reviewed-by: Peter Eisentraut, Kyotaro Horiguchi
Discussion: https://postgr.es/m/17339-a9e09aaf38a3457a@postgresql.org
Backpatch-through: 14
Extensions that define any custom GUCs should call
EmitWarningsOnPlaceholders after doing so, to help catch misspellings.
Many of our contrib modules hadn't gotten the memo on that, though.
Also add such calls to src/test/modules extensions that have GUCs.
While these aren't really user-facing, they should illustrate good
practice not faulty practice.
Shinya Kato
Discussion: https://postgr.es/m/524fa2c0a34f34b68fbfa90d0760d515@oss.nttdata.com
When aborting remote transaction or sending cancel request to a remote server,
postgres_fdw calls pgfdw_get_cleanup_result() to wait for the result of
transaction abort query or cancel request to arrive. It fails to get the result
if the timeout expires or a connection trouble happens.
Previously postgres_fdw reported no warning message even when the timeout
expired or a connection trouble happened in pgfdw_get_cleanup_result().
This could make the troubleshooting harder when such an event occurred.
This commit makes pgfdw_get_cleanup_result() tell its caller what trouble
(timeout or connection error) occurred, on failure, and also makes its caller
report the proper warning message based on that information.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/15aa988c-722e-ad3e-c936-4420c5b2bfea@oss.nttdata.com
pgfdw_report_error() in postgres_fdw gets a message from PGresult or
PGconn to report an error received from a remote server. Previously
if it could get a message from neither of them, it reported empty
message unexpectedly. The cause of this issue was that pgfdw_report_error()
didn't handle properly the case where no message could be obtained
and its local variable message_primary was set to '\0'.
This commit improves pgfdw_report_error() so that it reports the message
"could not obtain ..." when it gets no message and message_primary
is set to '\0'. This is the same behavior as when message_primary is NULL.
dblink_res_error() in dblink has the same issue, so this commit also
improves it in the same way.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/477c16c8-7ea4-20fc-38d5-ed3a77ed616c@oss.nttdata.com
fsstate in process_pending_requests (in postgres_fdw.c) was added in
8998e3cafa as an assertion-only variable, 1ec7fca859 stated using
the variable outside of assertions.
rd_index in get_index_column_opclass (in lsyscache.c) was introduced
in 2a6368343f, and then promptly used in the fix commit 7e04160390
shortly thereafter.
This removes the PG_USED_FOR_ASSERTS_ONLY variable decoration from
the above mentioned variables.
Reviewed-by: Greg Nancarrow <gregn4422@gmail.com>
Discussion: https://postgr.es/m/F959106C-0F21-43A5-B2AE-D007D51ACBEE@yesql.se
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
Memoize would always use the hash equality operator for the cache key
types to determine if the current set of parameters were the same as some
previously cached set. Certain types such as floating points where -0.0
and +0.0 differ in their binary representation but are classed as equal by
the hash equality operator may cause problems as unless the join uses the
same operator it's possible that whichever join operator is being used
would be able to distinguish the two values. In which case we may
accidentally return in the incorrect rows out of the cache.
To fix this here we add a binary mode to Memoize to allow it to the
current set of parameters to previously cached values by comparing
bit-by-bit rather than logically using the hash equality operator. This
binary mode is always used for LATERAL joins and it's used for normal
joins when any of the join operators are not hashable.
Reported-by: Tom Lane
Author: David Rowley
Discussion: https://postgr.es/m/3004308.1632952496@sss.pgh.pa.us
Backpatch-through: 14, where Memoize was added
Commit 81d5995b4b introduced more fine-grained errormessages for
incorrect relkinds for publication, while unlogged and temporary
tables were reported with using the same message. This provides
separate error messages for these types of relpersistence.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Jeevan Ladhe <jeevan.ladhe@enterprisedb.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/CALj2ACW9S=AswyQHjtO6WMcsergMkCBTtzXGrM8DX26DzfeTLQ@mail.gmail.com
When deparsing an expression of the form "remote_var OP constant",
we'd normally apply a cast to the constant to make sure that the
remote parser thinks it's of the same type we do. However, doing
so is often not necessary, and it causes problems if the user has
intentionally declared the local column as being of a different
type than the remote column. A plausible use-case for that is
using text to represent a type that's an enum on the remote side.
A comparison on such a column will get shipped as "var = 'foo'::text",
which blows up on the remote side because there's no enum = text
operator. But if we simply leave off the explicit cast, the
comparison will do exactly what the user wants.
It's possible to do this without major risk of semantic problems, by
relying on the longstanding parser heuristic that "if one operand of
an operator is of type unknown, while the other one has a known type,
assume that the unknown operand is also of that type". Hence, this
patch leaves off the cast only if (a) the operator inputs have the same
type locally; (b) the constant will print as a string literal or NULL,
both of which are initially taken as type unknown; and (c) the non-Const
input is a plain foreign Var. Rule (c) guarantees that the remote
parser will know the type of the non-Const input; moreover, it means
that if this cast-omission does cause any semantic surprises, that can
only happen in cases where the local column has a different type than
the remote column. That wasn't guaranteed to work anyway, and this
patch should represent a net usability gain for such cases.
One point that I (tgl) remain slightly uncomfortable with is that we
will ignore an implicit RelabelType when deciding if the non-Const input
is a plain Var. That makes it a little squishy to argue that the remote
should resolve the Const as being of the same type as its Var, because
then our Const is not the same type as our Var. However, if we don't do
that, then this hack won't work as desired if the user chooses to use
varchar rather than text to represent some remote column. That seems
useful, so do it like this for now. We might have to give up the
RelabelType-ignoring bit if any problems surface.
Dian Fay, with review and kibitzing by me
Discussion: https://postgr.es/m/C9LU294V7K4F.34LRRDU449O45@lamia
The foreign data wrapper's validator function provides a HINT message with
list of valid options for the object specified in CREATE or ALTER command,
when the option given in the command is invalid. Previously
postgresql_fdw_validator() and the validator functions for postgres_fdw and
dblink_fdw worked in that way even there were no valid options in the object,
which could lead to the HINT message with empty list (because there were
no valid options). For example, ALTER FOREIGN DATA WRAPPER postgres_fdw
OPTIONS (format 'csv') reported the following ERROR and HINT messages.
This behavior was confusing.
ERROR: invalid option "format"
HINT: Valid options in this context are:
There is no such issue in file_fdw. The validator function for file_fdw
reports the HINT message "There are no valid options in this context."
instead in that case.
This commit improves postgresql_fdw_validator() and the validator functions
for postgres_fdw and dblink_fdw so that they do likewise. For example,
this change causes the above ALTER FOREIGN DATA WRAPPER command to
report the following messages.
ERROR: invalid option "nonexistent"
HINT: There are no valid options in this context.
Author: Kosei Masumura
Reviewed-by: Bharath Rupireddy, Fujii Masao
Discussion: https://postgr.es/m/557d06cebe19081bfcc83ee2affc98d3@oss.nttdata.com
Commit c7b7311f6 adjusted conversion_error_callback to always use
information from the query's rangetable, to avoid doing catalog lookups
in an already-failed transaction. However, as a result of the utterly
inadequate documentation for make_tuple_from_result_row, I failed to
realize that fsstate could be NULL in some contexts. That led to a
crash if we got a conversion error in such a context. Fix by falling
back to the previous coding when fsstate is NULL. Improve the
commentary, too.
Per report from Andrey Borodin. Back-patch to 9.6, like the previous
patch.
Discussion: https://postgr.es/m/08916396-55E4-4D68-AB3A-BD6066F9E5C0@yandex-team.ru
In postgres_fdw, pgfdw_xact_callback() and pgfdw_subxact_callback()
callback functions do almost the same thing to rollback remote toplevel-
and sub-transaction. But previously their such rollback logics were
implemented separately in each function and in different way. Which
could decrease the readability and maintainability of the code.
To fix the issue, this commit creates the common function to rollback
remote transactions, and makes those callback functions use it. Which
allows us to avoid unnecessary code duplication.
Author: Fujii Masao
Reviewed-by: Zhihong Yu, Bharath Rupireddy
Discussion: https://postgr.es/m/62fbb63a-d46c-fb47-a56d-f6be1909aa44@oss.nttdata.com
This switches the default ACL to what the documentation has recommended
since CVE-2018-1058. Upgrades will carry forward any old ownership and
ACL. Sites that declined the 2018 recommendation should take a fresh
look. Recipes for commissioning a new database cluster from scratch may
need to create a schema, grant more privileges, etc. Out-of-tree test
suites may require such updates.
Reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/20201031163518.GB4039133@rfd.leadboat.com
The Value node struct is a weird construct. It is its own node type,
but most of the time, it actually has a node type of Integer, Float,
String, or BitString. As a consequence, the struct name and the node
type don't match most of the time, and so it has to be treated
specially a lot. There doesn't seem to be any value in the special
construct. There is very little code that wants to accept all Value
variants but nothing else (and even if it did, this doesn't provide
any convenient way to check it), and most code wants either just one
particular node type (usually String), or it accepts a broader set of
node types besides just Value.
This change removes the Value struct and node type and replaces them
by separate Integer, Float, String, and BitString node types that are
proper node types and structs of their own and behave mostly like
normal node types.
Also, this removes the T_Null node tag, which was previously also a
possible variant of Value but wasn't actually used outside of the
Value contained in A_Const. Replace that by an isnull field in
A_Const.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5ba6bc5b-3f95-04f2-2419-f8ddb4c046fb@enterprisedb.com
Commit 449ab63505 added the tests that check that postgres_fdw.application_name
GUC works as expected. But they were unstable and caused some buildfarm
members to report the failure. This commit reverts those unstable tests.
Reported-by: Tom Lane as per buildfarm
Discussion: https://postgr.es/m/3220909.1631054766@sss.pgh.pa.us
This commit adds postgres_fdw.application_name GUC which specifies
a value for application_name configuration parameter used
when postgres_fdw establishes a connection to a foreign server.
This GUC setting always overrides application_name option of
the foreign server object. This GUC is useful when we want to
specify our own application_name per remote connection.
Previously application_name of a remote connection could be set
basically only via options of a server object. But which meant that
every session connecting to the same foreign server basically
should use the same application_name. Also if we want to change
the setting, we had to execute "ALTER SERVER ... OPTIONS ..." command.
It was inconvenient.
Author: Hayato Kuroda
Reviewed-by: Masahiro Ikeda, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
Avoid repeating fragments of the query we're building, along the
same lines as recent cleanup in pg_dump. I got annoyed about this
because aa769f80e broke my pending patch to change postgres_fdw's
collation handling, due to each of us having incompletely done
this same refactoring. Let's finish that job in hopes of having
a more stable base.
postgres_fdw imported generated columns from the remote tables as plain
columns, and caused failures like "ERROR: cannot insert a non-DEFAULT
value into column "foo"" when inserting into the foreign tables, as it
tried to insert values into the generated columns. To fix, we do the
following under the assumption that generated columns in a postgres_fdw
foreign table are defined so that they represent generated columns in
the underlying remote table:
* Send DEFAULT for the generated columns to the foreign server on insert
or update, not generated column values computed on the local server.
* Add to postgresImportForeignSchema() an option "import_generated" to
include column generated expressions in the definitions of foreign
tables imported from a foreign server. The option is true by default.
The assumption seems reasonable, because that would make a query of the
postgres_fdw foreign table return values for the generated columns that
are consistent with the generated expression.
While here, fix another issue in postgresImportForeignSchema(): it tried
to include column generated expressions as column default expressions in
the foreign table definitions when the import_default option was enabled.
Per bug #16631 from Daniel Cherniy. Back-patch to v12 where generated
columns were added.
Discussion: https://postgr.es/m/16631-e929fe9db0ffc7cf%40postgresql.org
I failed to account for the possibility that when
ExecAppendAsyncEventWait() notifies multiple async-capable nodes using
postgres_fdw, a preceding node might invoke process_pending_request() to
process a pending asynchronous request made by a succeeding node. In
that case the succeeding node should produce a tuple to return to the
parent Append node from tuples fetched by process_pending_request() when
notified. Repair.
Per buildfarm via Michael Paquier. Back-patch to v14, like the previous
commit.
Thanks to Tom Lane for testing.
Discussion: https://postgr.es/m/YQP0UPT8KmPiHTMs%40paquier.xyz
This is simple enough except for the need to check whether CaseTestExpr
nodes have a collation that is not derived from a remote Var. For that,
examine the CASE's "arg" expression and then pass that info down into the
recursive examination of the WHEN expressions.
Alexander Pyhalov, reviewed by Gilles Darold and myself
Discussion: https://postgr.es/m/fda09032e90d85d9b726a41e03f9097f@postgrespro.ru
A pending asynchronous request is handled by process_pending_request(),
which previously not only processed an in-progress remote query but
performed ExecForeignScan() to produce a tuple to return to the local
server asynchronously from the result of the remote query. But that led
to a server crash when executing a query or led to an "InstrStartNode
called twice in a row" or "InstrEndLoop called on running node" failure
when doing EXPLAIN ANALYZE of it, in cases where the plan tree for it
contained multiple async-capable nodes accessing the same
initplan/subplan that contained multiple async-capable nodes scanning
the same foreign tables as for the parent async-capable nodes, as
reported by Andrey Lepikhov. The reason is that the second step in
process_pending_request() invoked when executing the initplan/subplan
for one of the parent async-capable nodes caused recursive execution of
the initplan/subplan for another of the parent async-capable nodes.
To fix, split process_pending_request() into the two steps and postpone
the second step until ForeignAsyncConfigureWait() is called for each of
the pending asynchronous requests. Also, in ExecAppendAsyncEventWait()
we assumed that FDWs would register at least one wait event in a
WaitEventSet created there when they were called from
ForeignAsyncConfigureWait() in that function, but allow FDWs to register
zero wait events in the WaitEventSet; modify ExecAppendAsyncEventWait()
to just return in that case.
Oversight in commit 27e1f1456. Back-patch to v14 where that commit went
in.
Andrey Lepikhov and Etsuro Fujita
Discussion: https://postgr.es/m/fe5eaa19-1704-e4a4-76ee-3b9d37ade399@postgrespro.ru
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
This patch causes EXPLAIN output to refer to objects that are in
the current session's temp schema with the "pg_temp" schema alias
rather than that schema's actual name. This is useful for our own
testing purposes since it will stabilize EXPLAIN VERBOSE output
for such cases, allowing us to use that in regression tests.
It should be less confusing for end users too.
Since ruleutils.c needs to change behavior for this, the change
also leaks into a few other users of ruleutils.c, for example
pg_get_viewdef(). AFAICS that won't cause any problems.
We did find that aggressively trying to change this behavior
across-the-board would cause issues, but as long as "pg_temp"
only appears within generated SQL text, I think it'll be fine.
Along the way, make get_namespace_name_or_temp conform to the
same API as get_namespace_name, ie that it returns a palloc'd
string or NULL. The current behavior hasn't caused any bugs
since no callers attempt to pfree the result, but if it gets
more widespread usage that could become a problem.
Amul Sul, reviewed and extended by me
Discussion: https://postgr.es/m/CAAJ_b97W=QaGmag9AhWNbmx3uEYsNkXWL+OVW1_E1D3BtgWvtw@mail.gmail.com
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
In 86dc90056, I'd written find_modifytable_subplan with the assumption
that if the immediate child of a ModifyTable is a Result, it must be
a projecting Result with a subplan. However, if the UPDATE or DELETE
has a provably-constant-false WHERE clause, that's not so: we'll
generate a dummy subplan with a childless Result. Add the missing
null-check so we don't crash on such cases.
Per report from Alexander Pyhalov.
Discussion: https://postgr.es/m/b9a6f53549456b2f3e2fd150dcd79d72@postgrespro.ru
Previously the values such as '100$%$#$#', '9,223,372,' were accepted and
treated as valid integers for postgres_fdw options batch_size and fetch_size.
Whereas this is not the case with fdw_startup_cost and fdw_tuple_cost options
for which an error is thrown. This was because endptr was not used
while converting strings to integers using strtol.
This commit changes the logic so that it uses parse_int function
instead of strtol as it serves the purpose by returning false in case
if it is unable to convert the string to integer. Note that
this function also rounds off the values such as '100.456' to 100 and
'100.567' or '100.678' to 101.
While on this, use parse_real for fdw_startup_cost and fdw_tuple_cost options.
Since parse_int and parse_real are being used for reloptions and GUCs,
it is more appropriate to use in postgres_fdw rather than using strtol
and strtod directly.
Back-patch to v14.
Author: Bharath Rupireddy
Reviewed-by: Ashutosh Bapat, Tom Lane, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVMO6wY5Pc4oe1OCgUOAtdjHuFsBDw8R5uoYR86eWFQDA@mail.gmail.com
As in 50371df26, this is a bad idea since the callback can't really
know what error is being thrown and thus whether or not it is safe
to attempt catalog accesses. Rather than pushing said accesses into
the mainline code where they'd usually be a waste of cycles, we can
look at the query's rangetable instead.
This change does mean that we'll be printing query aliases (if any
were used) rather than the table or column's true name. But that
doesn't seem like a bad thing: it's certainly a more useful definition
in self-join cases, for instance. In any case, it seems unlikely that
any applications would be depending on this detail, so it seems safe
to change.
Patch by me. Original complaint by Andres Freund; Bharath Rupireddy
noted the connection to conversion_error_callback.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
The queries involving ft1_nopw don't stably return the same row
anymore. I surmise that an autovacuum hitting "S 1"."T 1"
right after the updates introduced by f61db909d/5843659d0 freed
some space, changing where subsequent insertions get stored.
It's only by good luck that these results were stable before,
though, since a LIMIT without ORDER BY isn't well defined,
and it's not like we've ever treated that table as append-only
in this test script.
Since we only really care whether these commands succeed or not,
just replace "SELECT *" with "SELECT 1".
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=crake&dt=2021-06-23%2019%3A52%3A08
Buildfarm members ayu and tern have sometimes shown a different
plan than expected for this query. I'd been unable to reproduce
that before today, but I finally realized what is happening.
If there is a concurrent open transaction (probably an autovacuum
run in the buildfarm, but this can also be arranged manually),
then the index entries for the rows removed by the DELETE a few
lines up are not killed promptly, causing a change in the planner's
estimate of the extremal value of ft2.c1, which moves the rowcount
estimate for "c1 > 1100" by enough to change the join plan from
nestloop to hash.
To fix, change the query condition to "c1 > 1000", causing the
hash plan to be preferred whether or not a concurrent open
transaction exists. Since this UPDATE is tailored to be a no-op,
nothing else changes.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=ayu&dt=2021-06-09%2022%3A45%3A48
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=ayu&dt=2021-06-13%2022%3A38%3A18
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=tern&dt=2021-06-20%2004%3A55%3A36
Commit b676ac443b optimized handling of tuple slots with bulk inserts
into foreign tables, so that the slots are initialized only once and
reused for all batches. The data was however copied into the slots only
after the initialization, inserting duplicate values when the slot gets
reused. Fixed by moving the ExecCopySlot outside the init branch.
The existing postgres_fdw tests failed to catch this due to inserting
data into foreign tables without unique indexes, and then checking only
the number of inserted rows. This adds a new test with both a unique
index and a check of inserted values.
Reported-by: Alexander Pyhalov
Discussion: https://postgr.es/m/7a8cf8d56b3d18e5c0bccd6cd42d04ac%40postgrespro.ru
The FE/BE protocol identifies parameters with an Int16 index, which
limits the maximum number of parameters per query to 65535. With
batching added to postges_fdw this limit is much easier to hit, as
the whole batch is essentially a single query, making this error much
easier to hit.
The failures are a bit unpredictable, because it also depends on the
number of columns in the query. So instead of just failing, this patch
tweaks the batch_size to not exceed the maximum number of parameters.
Reported-by: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB571603973C0AC2874AD6BF2594299%40OS0PR01MB5716.jpnprd01.prod.outlook.com
In cases where run-time pruning isn't required, the synchronous and
asynchronous subplans for an async-aware Append node determined using
classify_matching_subplans() should be re-used when rescanning the node,
but the previous code re-determined them using that function repeatedly
each time when rescanning the node, leading to incorrect results in a
normal build and an Assert failure in an Assert-enabled build as that
function doesn't assume that it's called repeatedly in such cases. Fix
the code as mentioned above.
My oversight in commit 27e1f1456.
While at it, initialize async-related pointers/variables to NULL/zero
explicitly in ExecInitAppend() and ExecReScanAppend(), just to be sure.
(The variables would have been set to zero before we get to the latter
function, but let's do so.)
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAPmGK16Q4B2_KY%2BJH7rb7wQbw54AUprp7TMekGTd2T1B62yysQ%40mail.gmail.com
Commit 86dc90056 expects that FDWs can cope with whole-row Vars for
their tables, even if the Vars are marked with vartype RECORDOID.
Previously, whole-row Vars generated by the planner had vartype equal
to the relevant table's rowtype OID. (The point behind this change is
to enable sharing of resjunk columns across inheritance child tables.)
It turns out that postgres_fdw fails to cope with this, though through
bad fortune none of its test cases exposed that. Things mostly work,
but when we try to read back a value of such a Var, the expected
rowtype is not available to record_in(). Fortunately, it's not
difficult to hack up the tupdesc that controls this process to
substitute the foreign table's rowtype for RECORDOID. Thus we can
solve the runtime problem while still sharing the resjunk column
with other tables.
Per report from Alexander Pyhalov.
Discussion: https://postgr.es/m/7817fb9ebd6661cdf9b67dec6e129a78@postgrespro.ru
Commit 428b260f8 broke planning of cases where row marks are needed
(SELECT FOR UPDATE, etc) and one of the query's tables is a foreign
table that has regular table(s) as inheritance children. We got the
reverse case right, but apparently were thinking that foreign tables
couldn't be inheritance parents. Not so; so we need to be able to
add a CTID junk column while adding a new child, not only a wholerow
junk column.
Back-patch to v12 where the faulty code came in.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEmo3FV1LAQ4TVyS2h1WM=kMkZUmbNuZSCnfHvMcUcPeA@mail.gmail.com
Etsuro Fujita