The pgoutput module uses a global variable (publish_no_origin) to cache
the action for the origin filter, but we didn't reset the flag when
shutting down the output plugin, so subsequent retries may access the
previous publish_no_origin value.
We fix this by storing the flag in the output plugin's private data.
Additionally, the patch removes the currently unused origin string from the
structure.
For the back branch, to avoid changing the exposed structure, we eliminated the
global variable and instead directly used the origin string for change
filtering.
Author: Hou Zhijie
Reviewed-by: Amit Kapila, Michael Paquier
Backpatch-through: 16
Discussion: http://postgr.es/m/OS0PR01MB571690EF24F51F51EFFCBB0E94FAA@OS0PR01MB5716.jpnprd01.prod.outlook.com
Some of the test_decoding test output was extremely wide, because it
deals with massive toasted values, and the aligned mode causes psql to
produce 200kB of whitespace and dashes. Change to unaligned mode
temporarily to avoid that behavior.
Backpatch to 14, where it applies cleanly.
Discussion: https://postgr.es/m/20230405103953.sxleixp3uz5lazst@alvherre.pgsql
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Mainly move some detail from errmsg to errdetail, remove explicit
mention of superuser where appropriate, since that is implied in most
permission checks, and make messages more uniform.
Author: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/20230316234701.GA903298@nathanxps13
Currently, there are quite a few places in reorderbuffer.c that tries to
access top-transaction for a subtransaction. This makes the code to access
top-transaction consistent and easier to follow.
Author: Peter Smith
Reviewed-by: Vignesh C, Sawada Masahiko
Discussion: https://postgr.es/m/CAHut+PuCznOyTqBQwjRUu-ibG-=KHyCv-0FTcWQtZUdR88umfg@mail.gmail.com
To run all tests that support running against existing server:
$ meson test --setup running
To run just the main pg_regress tests against existing server:
$ meson test --setup running regress-running/regress
To ensure the 'running' setup continues to work, test it as part of the
freebsd CI task.
Discussion: https://postgr.es/m/CAH2-Wz=XDQcmLoo7RR_i6FKQdDmcyb9q5gStnfuuQXrOGhB2sQ@mail.gmail.com
When the logical decoding restarts from NEW_CID, since there is no
association between the top transaction and its subtransaction, both are
created as top transactions and have the same LSN. This caused the
assertion failure in AssertTXNLsnOrder().
This patch skips the assertion check until we reach the LSN at which we
start decoding the contents of the transaction, specifically
start_decoding_at LSN in SnapBuild. This is okay because we don't
guarantee to make the association between top transaction and
subtransaction until we try to decode the actual contents of transaction.
The ordering of the records prior to the start_decoding_at LSN should have
been checked before the restart.
The other assertion failure is due to the reason that we forgot to track
that we have considered top-level transaction id in the list of catalog
changing transactions that were committed when one of its subtransactions
is marked as containing catalog change.
Reported-by: Tomas Vondra, Osumi Takamichi
Author: Masahiko Sawada, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi, Masahiko Sawada
Backpatch-through: 10
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
Discussion: https://postgr.es/m/TYCPR01MB83733C6CEAE47D0280814D5AED7A9%40TYCPR01MB8373.jpnprd01.prod.outlook.com
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in contrib code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
It has been incorrectly assumed in commit 7f13ac8123 that we can either
purge all or none in the catalog modifying xids list retrieved from a
serialized snapshot. It is quite possible that some of the xids in that
array are old enough to be pruned but not others.
As per buildfarm
Author: Amit Kapila and Masahiko Sawada
Reviwed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAA4eK1LBtv6ayE+TvCcPmC-xse=DVg=SmbyQD1nv_AaqcpUJEg@mail.gmail.com
Previously, we relied on HEAP2_NEW_CID records and XACT_INVALIDATION
records to know if the transaction has modified the catalog, and that
information is not serialized to snapshot. Therefore, after the restart,
if the logical decoding decodes only the commit record of the transaction
that has actually modified a catalog, we will miss adding its XID to the
snapshot. Thus, we will end up looking at catalogs with the wrong
snapshot.
To fix this problem, this change adds the list of transaction IDs and
sub-transaction IDs, that have modified catalogs and are running during
snapshot serialization, to the serialized snapshot. After restart or
otherwise, when we restore from such a serialized snapshot, the
corresponding list is restored in memory. Now, when decoding a COMMIT
record, we check both the list and the ReorderBuffer to see if the
transaction has modified catalogs.
Since this adds additional information to the serialized snapshot, we
cannot backpatch it. For back branches, we took another approach.
We remember the last-running-xacts list of the decoded RUNNING_XACTS
record after restoring the previously serialized snapshot. Then, we mark
the transaction as containing catalog changes if it's in the list of
initial running transactions and its commit record has
XACT_XINFO_HAS_INVALS. This doesn't require any file format changes but
the transaction will end up being added to the snapshot even if it has
only relcache invalidations. But that won't be a problem since we use
snapshot built during decoding only to read system catalogs.
This commit bumps SNAPBUILD_VERSION because of a change in SnapBuild.
Reported-by: Mike Oh
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Shi yu, Takamichi Osumi, Kyotaro Horiguchi, Bertrand Drouvot, Ahsan Hadi
Backpatch-through: 10
Discussion: https://postgr.es/m/81D0D8B0-E7C4-4999-B616-1E5004DBDCD2%40amazon.com
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
We have some streaming tests that rely on the size of changes which can
fail if there are additional changes like invalidation messages by
background activity like auto analyze. Avoid such failures by increasing
autovacuum_naptime to a reasonably high value (1d).
Author: Dilip Kumar
Backpatch-through: 14
Discussion: https://postgr.es/m/1958043.1650129119@sss.pgh.pa.us
- subscriber stats reset path was untested
- slot stat sreset path for all slots was untested
- pg_stat_database.sessions etc was untested
- pg_stat_reset_shared() was untested, for any kind of shared stats
- pg_stat_reset() was untested
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
In the stats collector days it was hard to write tests for the stats system,
because fundamentally delivery of stats messages over UDP was not
synchronous (nor guaranteed). Now we easily can force pending stats updates to
be flushed synchronously.
This moves stats.sql into a parallel group, there isn't a reason for it to run
in isolation anymore. And it may shake out some bugs.
Bumps catversion.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
Some of the test_decoding regression tests are unstable due to modifying
a sequence. The first increment of a sequence after a checkpoint is
always logged (and thus decoded), which makes the output unpredictable.
The runs are usually much shorter than a checkpoint internal, so these
failures are rare, but we've seen a couple of them on animals that are
either slow or are running with valgrind/clobber cache/...
Fixed by skipping sequence decoding in most tests, with the exception of
the test aimed at testing decoding of sequences.
Reported-by: Amita Kapila
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Since commit ffa2e4670, libpq accumulates text in conn->errorMessage
across a whole query cycle. In some situations, we may report more
than one error event within a cycle: the easiest case to reach is
where we report a FATAL error message from the server, and then a
bit later we detect loss of connection. Since, historically, each
error PGresult bears the entire content of conn->errorMessage,
this results in duplication of the FATAL message in any output that
concatenates the contents of the PGresults.
Accumulation in errorMessage still seems like a good idea, especially
in view of the number of places that did ad-hoc error concatenation
before ffa2e4670. So to fix this, let's track how much of
conn->errorMessage has been read out into error PGresults, and only
include new text in later PGresults. The tricky part of that is
to be sure that we never discard an error PGresult once made (else
we'd risk dropping some text, a problem much worse than duplication).
While libpq formerly did that in some code paths, a little bit of
rearrangement lets us postpone making an error PGresult at all until
we are about to return it.
A side benefit of that postponement is that it now becomes practical
to return a dummy static PGresult in cases where we hit out-of-memory
while trying to manufacture an error PGresult. This eliminates the
admittedly-very-rare case where we'd return NULL from PQgetResult,
indicating successful query completion, even though what actually
happened was an OOM failure.
Discussion: https://postgr.es/m/ab4288f8-be5c-57fb-2400-e3e857f53e46@enterprisedb.com
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
Regression tests need to use skip-empty-xacts = false, because there
might be accidental concurrent activity (like autovacuum), particularly
on slow machines. The tests added by 80901b3291 failed to do that in a
couple places, triggering occasional failures on buildfarm.
Fixing the tests however uncovered a bug in the code, because sequence
callbacks did not handle skip-empty-xacts properly. For trasactional
increments we need to check/update the xact_wrote_changes flag, and emit
the BEGIN if it's the first change in the transaction.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20220212220413.b25amklo7t4xb7ni%40alap3.anarazel.de
Commit 0da92dc530 improved the logical decoding infrastructure to handle
sequences, and did various changes to related parts (WAL logging etc.).
But it did not include any implementation of the new callbacks added to
OutputPluginCallbacks.
This extends test_decoding with two callbacks to decode sequences. The
decoding of sequences may be disabled using 'include-sequences', a new
option of the output plugin.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Hannu Krosing, Andres Freund
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
When using replication origins, pg_replication_origin_xact_setup() is an
optional choice to be able to set a LSN and a timestamp to mark the
origin, which would be additionally added to WAL for transaction commits
or aborts (including 2PC transactions). An assertion in the code path
of PREPARE TRANSACTION assumed that this data should always be set, so
it would trigger when using replication origins without setting up an
origin LSN. Some tests are added to cover more this kind of scenario.
Oversight in commit 1eb6d65.
Per discussion with Amit Kapila and Masahiko Sawada.
Discussion: https://postgr.es/m/YbbBfNSvMm5nIINV@paquier.xyz
Backpatch-through: 11
This commit adds a set of functions able to look at the contents of
various paths related to replication slots:
- pg_ls_logicalsnapdir, for pg_logical/snapshots/
- pg_ls_logicalmapdir, for pg_logical/mappings/
- pg_ls_replslotdir, for pg_replslot/<slot_name>/
These are intended to be used by monitoring tools. Unlike pg_ls_dir(),
execution permission can be granted to non-superusers. Roles members of
pg_monitor gain have access to those functions.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Justin Pryzby
Discussion: https://postgr.es/m/CALj2ACWsfizZjMN6bzzdxOk1ADQQeSw8HhEjhmVXn_Pu+7VzLw@mail.gmail.com
The five modules in our TAP test framework all had names in the top
level namespace. This is unwise because, even though we're not
exporting them to CPAN, the names can leak, for example if they are
exported by the RPM build process. We therefore move the modules to the
PostgreSQL::Test namespace. In the process PostgresNode is renamed to
Cluster, and TestLib is renamed to Utils. PostgresVersion becomes simply
PostgreSQL::Version, to avoid possible confusion about what it's the
version of.
Discussion: https://postgr.es/m/aede93a4-7d92-ef26-398f-5094944c2504@dunslane.net
Reviewed by Erik Rijkers and Michael Paquier
Incrementing the level of the call stack reported is useful for
debugging purposes as it allows to control which part of the test is
exactly failing, especially if a test is structured with subroutines
that call routines from Test::More.
This adds more incrementations of $Test::Builder::Level where debugging
gets improved (for example it does not make sense for some paths like
pg_rewind where long subroutines are used).
A note is added to src/test/perl/README about that, based on a
suggestion from Andrew Dunstan and a wording coming from both of us.
Usage of Test::Builder::Level has spread in 12, so a backpatch down to
this version is done.
Reviewed-by: Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson
Discussion: https://postgr.es/m/YV1CCFwgM1RV1LeS@paquier.xyz
Backpatch-through: 12
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
There is only one constructor now for PostgresNode, with the idiomatic
name 'new'. The method is not exported by the class, and must be called
as "PostgresNode->new('name',[args])". All the TAP tests that use
PostgresNode are modified accordingly. Third party scripts will need
adjusting, which is a fairly mechanical process (I just used a sed
script).
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
For no obvious reason, isolationtester has always insisted that
session and step names be written with double quotes. This is
fairly tedious and does little for test readability, especially
since the names that people actually choose almost always look
like normal identifiers. Hence, let's tweak the lexer to allow
SQL-like identifiers not only double-quoted strings.
(They're SQL-like, not exactly SQL, because I didn't add any
case-folding logic. Also there's no provision for U&"..." names,
not that anyone's likely to care.)
There is one incompatibility introduced by this change: if you write
"foo""bar" with no space, that used to be taken as two identifiers,
but now it's just one identifier with an embedded quote mark.
I converted all the src/test/isolation/ specfiles to remove
unnecessary double quotes, but stopped there because my
eyes were glazing over already.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/759113.1623861959@sss.pgh.pa.us
Previously, isolationtester displayed SQL query results using some
ad-hoc code that clearly hadn't had much effort expended on it.
Field values longer than 14 characters weren't separated from
the next field, and usually caused misalignment of the columns
too. Also there was no visual separation of a query's result
from subsequent isolationtester output. This made test result
files confusing and hard to read.
To improve matters, let's use libpq's PQprint() function. Although
that's long since unused by psql, it's still plenty good enough
for the purpose here.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/582362.1623798221@sss.pgh.pa.us
We've long contended with isolation test results that aren't entirely
stable. Some test scripts insert long delays to try to force stable
results, which is not terribly desirable; but other erratic failure
modes remain, causing unrepeatable buildfarm failures. I've spent a
fair amount of time trying to solve this by improving the server-side
support code, without much success: that way is fundamentally unable
to cope with diffs that stem from chance ordering of arrival of
messages from different server processes.
We can improve matters on the client side, however, by annotating
the test scripts themselves to show the desired reporting order
of events that might occur in different orders. This patch adds
three types of annotations to deal with (a) test steps that might or
might not complete their waits before the isolationtester can see them
waiting; (b) test steps in different sessions that can legitimately
complete in either order; and (c) NOTIFY messages that might arrive
before or after the completion of a step in another session. We might
need more annotation types later, but this seems to be enough to deal
with the instabilities we've seen in the buildfarm. It also lets us
get rid of all the long delays that were previously used, cutting more
than a minute off the runtime of the isolation tests.
Back-patch to all supported branches, because the buildfarm
instabilities affect all the branches, and because it seems desirable
to keep isolationtester's capabilities the same across all branches
to simplify possible future back-patching of tests.
Discussion: https://postgr.es/m/327948.1623725828@sss.pgh.pa.us
While decoding the multi-insert WAL we can't clean the toast untill we get
the last insert of that WAL record. Now if we stream the changes before we
get the last change, the memory for toast chunks won't be released and we
expect the txn to have streamed all changes after streaming. This
restriction is mainly to ensure the correctness of streamed transactions
and it doesn't seem worth uplifting such a restriction just to allow this
case because anyway we will stream the transaction once such an insert is
complete.
Previously we were using two different flags (one for toast tuples and
another for speculative inserts) to indicate partial changes. Now instead
we replaced both of them with a single flag to indicate partial changes.
Reported-by: Pavan Deolasee
Author: Dilip Kumar
Reviewed-by: Pavan Deolasee, Amit Kapila
Discussion: https://postgr.es/m/CABOikdN-_858zojYN-2tNcHiVTw-nhxPwoQS4quExeweQfG1Ug@mail.gmail.com
Some of the tests were not considering that the slot's spill stats could be
received by the stats collector after we have reset the stats. Remove
those tests and don't check total bytes decoded and sent to output plugin
in the spilled stats test as we can send the spilled stats to the stats
collector before actually sending the changes to output plugin.
Reported-by: Tom Lane as per buildfarm
Author: Vignesh C, Sawada Masahiko
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Amit Kapila