WAL (and timeline history) files created by pg_basebackup did not
maintain the new base backup's archive status. That's currently not a
problem if the new node is used as a standby - but if that node is
promoted all still existing files can get archived again. With a high
wal_keep_segment settings that can happen a significant time later -
which is quite confusing.
Change both the backend (for the -x/-X fetch case) and pg_basebackup
(for -X stream) itself to always mark WAL/timeline files included in
the base backup as .done. That's in line with walreceiver.c doing so.
The verbosity of the pg_basebackup changes show pretty clearly that it
needs some refactoring, but that'd result in not be backpatchable
changes.
Backpatch to 9.1 where pg_basebackup was introduced.
Discussion: 20141205002854.GE21964@awork2.anarazel.de
Use the phraseology "ISO 8601 week-numbering year" in place of just
"ISO year", and make related adjustments to other terminology.
The point of this change is that it seems some people see "ISO year"
and think "standard year", whereupon they're surprised when constructs
like to_char(..., "IYYY-MM-DD") produce nonsensical results. Perhaps
hanging a few more adjectives on it will discourage them from jumping
to false conclusions. I put in an explicit warning against that
specific usage, too, though the main point is to discourage people
who haven't read this far down the page.
In passing fix some nearby markup and terminology inconsistencies.
For simple boolean variables such as ON_ERROR_STOP, psql has for a long
time recognized variant spellings of "on" and "off" (such as "1"/"0"),
and it also made a point of warning you if you'd misspelled the setting.
But these conveniences did not exist for other keyword-valued variables.
In particular, though ECHO_HIDDEN and ON_ERROR_ROLLBACK include "on" and
"off" as possible values, none of the alternative spellings for those were
recognized; and to make matters worse the code would just silently assume
"on" was meant for any unrecognized spelling. Several people have reported
getting bitten by this, so let's fix it. In detail, this patch:
* Allows all spellings recognized by ParseVariableBool() for ECHO_HIDDEN
and ON_ERROR_ROLLBACK.
* Reports a warning for unrecognized values for COMP_KEYWORD_CASE, ECHO,
ECHO_HIDDEN, HISTCONTROL, ON_ERROR_ROLLBACK, and VERBOSITY.
* Recognizes all values for all these variables case-insensitively;
previously there was a mishmash of case-sensitive and case-insensitive
behaviors.
Back-patch to all supported branches. There is a small risk of breaking
existing scripts that were accidentally failing to malfunction; but the
consensus is that the chance of detecting real problems and preventing
future mistakes outweighs this.
Document the long forms of \H \i \ir \o \p \r \w ... apparently, we have
a long and dishonorable history of leaving out the unabbreviated names of
psql backslash commands.
Avoid saying "Unix shell"; we can just say "shell" with equal clarity,
and not leave Windows users wondering whether the feature works for them.
Improve consistency of documentation of \g \o \w metacommands. There's
no reason to use slightly different wording or markup for each one.
Windows versions later than Windows Server 2003 map "localhost" to ::1.
Account for that in the generated pg_hba.conf, fixing another oversight
in commit f6dc6dd5ba. Back-patch to 9.0,
like that commit.
David Rowley and Noah Misch
For some reason this seems to have been missed when the lists in
src/timezone/tznames/ were first constructed. We can't put it in Default
because of the conflict with US CST, but we should certainly list it among
the alternative entries in Asia.txt. (I checked for other oversights, but
all the other abbreviations that are in current use according to the IANA
files seem to be accounted for.) Noted while responding to bug #12326.
Explain that you have to use "VARIADIC ARRAY[]" to pass an empty array
to a variadic parameter position. This was already implicit in the text
but it seems better to spell it out.
Per a suggestion from David Johnston, though I didn't use his proposed
wording. Back-patch to all supported branches.
In LWLockRelease() (and in 9.4+ LWLockUpdateVar()) we release enqueued
waiters using PGSemaphoreUnlock(). As there are other sources of such
unlocks backends only wake up if MyProc->lwWaiting is set to false;
which is only done in the aforementioned functions.
Before this commit there were dangers because the store to lwWaitLink
could become visible before the store to lwWaitLink. This could both
happen due to compiler reordering (on most compilers) and on some
platforms due to the CPU reordering stores.
The possible consequence of this is that a backend stops waiting
before lwWaitLink is set to NULL. If that backend then tries to
acquire another lock and has to wait there the list could become
corrupted once the lwWaitLink store is finally performed.
Add a write memory barrier to prevent that issue.
Unfortunately the barrier support has been only added in 9.2. Given
that the issue has not knowingly been observed in praxis it seems
sufficient to prohibit compiler reordering using volatile for 9.0 and
9.1. Actual problems due to compiler reordering are more likely
anyway.
Discussion: 20140210134625.GA15246@awork2.anarazel.de
The possibility that constant subexpressions of a CASE might be evaluated
at planning time was touched on in 9.17.1 (CASE expressions), but it really
ought to be explained in 4.2.14 (Expression Evaluation Rules) which is the
primary discussion of such topics. Add text and an example there, and
revise the <note> under CASE to link there.
Back-patch to all supported branches, since it's acted like this for a
long time (though 9.2+ is probably worse because of its more aggressive
use of constant-folding via replanning of nominally-prepared statements).
Pre-9.4, also back-patch text added in commit 0ce627d4 about CASE versus
aggregate functions.
Tom Lane and David Johnston, per discussion of bug #12273.
Back-patch to 9.0 (all supported versions). This is mere
future-proofing in the context of the master branch, but commit
f6dc6dd5ba requires it of older branches.
Use SSPI authentication to allow connections exclusively from the OS
user that launched the test suite. This closes on Windows the
vulnerability that commit be76a6d39e
closed on other platforms. Users of "make installcheck" or custom test
harnesses can run "pg_regress --config-auth=DATADIR" to activate the
same authentication configuration that "make check" would use.
Back-patch to 9.0 (all supported versions).
Security: CVE-2014-0067
MapArrayTypeName would copy up to NAMEDATALEN-1 bytes of the base type
name, which of course is wrong: after prepending '_' there is only room for
NAMEDATALEN-2 bytes. Aside from being the wrong result, this case would
lead to overrunning the statically allocated work buffer. This would be a
security bug if the function were ever used outside bootstrap mode, but it
isn't, at least not in any currently supported branches.
Aside from fixing the off-by-one loop logic, this patch gets rid of the
static work buffer by having MapArrayTypeName pstrdup its result; the sole
caller was already doing that, so this just requires moving the pstrdup
call. This saves a few bytes but mainly it makes the API a lot cleaner.
Back-patch on the off chance that there is some third-party code using
MapArrayTypeName with less-secure input. Pushing pstrdup into the function
should not cause any serious problems for such hypothetical code; at worst
there might be a short term memory leak.
Per Coverity scanning.
If the called command fails to return data, runShellCommand forgot to
pclose() the pipe before returning. This is fairly harmless in the current
code, because pgbench would then abandon further processing of that client
thread; so no more than nclients descriptors could be leaked this way. But
it's not hard to imagine future improvements whereby that wouldn't be true.
In any case, it's sloppy coding, so patch all branches. Found by Coverity.
Ordinarily we can omit checking of a WHERE condition that matches a partial
index's condition, when we are using an indexscan on that partial index.
However, in SELECT FOR UPDATE we must include the "redundant" filter
condition in the plan so that it gets checked properly in an EvalPlanQual
recheck. The planner got this mostly right, but improperly omitted the
filter condition if the index in question was on an inheritance child
table. In READ COMMITTED mode, this could result in incorrectly returning
just-updated rows that no longer satisfy the filter condition.
The cause of the error is using get_parse_rowmark() when get_plan_rowmark()
is what should be used during planning. In 9.3 and up, also fix the same
mistake in contrib/postgres_fdw. It's currently harmless there (for lack
of inheritance support) but wrong is wrong, and the incorrect code might
get copied to someplace where it's more significant.
Report and fix by Kyotaro Horiguchi. Back-patch to all supported branches.
In READ COMMITTED mode, if a SELECT FOR UPDATE discovers it has to redo
WHERE-clause checking on rows that have been updated since the SELECT's
snapshot, it invokes EvalPlanQual processing to do that. If this first
occurs within a non-first child table of an inheritance tree, the previous
coding could accidentally re-return a matching row from an earlier,
already-scanned child table. (And, to add insult to injury, I think this
could make it miss returning a row that should have been returned, if the
updated row that this happens on should still have passed the WHERE qual.)
Per report from Kyotaro Horiguchi; the added isolation test is based on his
test case.
This has been broken for quite awhile, so back-patch to all supported
branches.
Used to say just "could not read password from file "...": Success", which
isn't very informative.
Mats Erik Andersson. Backpatch to all supported versions.
We were not checking to see if the supplied dscale was valid for the given
digit array when receiving binary-format numeric values. While dscale can
validly be more than the number of nonzero fractional digits, it shouldn't
be less; that case causes fractional digits to be hidden on display even
though they're there and participate in arithmetic.
Bug #12053 from Tommaso Sala indicates that there's at least one broken
client library out there that sometimes supplies an incorrect dscale value,
leading to strange behavior. This suggests that simply throwing an error
might not be the best response; it would lead to failures in applications
that might seem to be working fine today. What seems the least risky fix
is to truncate away any digits that would be hidden by dscale. This
preserves the existing behavior in terms of what will be printed for the
transmitted value, while preventing subsequent arithmetic from producing
results inconsistent with that.
In passing, throw a specific error for the case of dscale being outside
the range that will fit into a numeric's header. Before you got "value
overflows numeric format", which is a bit misleading.
Back-patch to all supported branches.
Coverity complained that the "else" added to fillPGconn() was unreachable,
which it was. Remove the dead code. In passing, rearrange the tests so as
not to bother trying to fetch values for options that can't be assigned.
Pre-9.3 did not have that issue, but it did have a "return" that should be
"goto oom_error" to ensure that a suitable error message gets filled in.
Mark Simonetti reported that libxslt sometimes crashes for him, and that
swapping xslt_process's object-freeing calls around to do them in reverse
order of creation seemed to fix it. I've not reproduced the crash, but
valgrind clearly shows a reference to already-freed memory, which is
consistent with the idea that shutdown of the xsltTransformContext is
trying to reference the already-freed stylesheet or input document.
With this patch, valgrind is no longer unhappy.
I have an inquiry in to see if this is a libxslt bug or if we're just
abusing the library; but even if it's a library bug, we'd want to adjust
our code so it doesn't fail with unpatched libraries.
Back-patch to all supported branches, because we've been doing this in
the wrong(?) order for a long time.
If the "dbname" attribute in PQconnectDBParams contained a connection string
or URI (and expand_dbname = TRUE), the database name from the connection
string could not be overridden by a subsequent "dbname" keyword in the
array. That was not intentional; all other options can be overridden.
Furthermore, any subsequent "dbname" caused the connection string from the
first dbname value to be processed again, overriding any values for the same
options that were given between the connection string and the second dbname
option.
In the passing, clarify in the docs that only the first dbname option in the
array is parsed as a connection string.
Alex Shulgin. Backpatch to all supported versions.
An out-of-memory in most of these would lead to strange behavior, like
connecting to a different database than intended, but some would lead to
an outright segfault.
Alex Shulgin and me. Backpatch to all supported versions.
In bug #12000, Andreas Kunert complained that the documentation was
misleading in saying "FROM T1 CROSS JOIN T2 is equivalent to FROM T1, T2".
That's correct as far as it goes, but the equivalence doesn't hold when
you consider three or more tables, since JOIN binds more tightly than
comma. I added a <note> to explain this, and ended up rearranging some
of the existing text so that the note would make sense in context.
In passing, rewrite the description of JOIN USING, which was unnecessarily
vague, and hadn't been helped any by somebody's reliance on markup as a
substitute for clear writing. (Mostly this involved reintroducing a
concrete example that was unaccountably removed by commit 032f3b7e166cfa28.)
Back-patch to all supported branches.
The regression test cases added in commits b2cbced9e et al depended in part
on the Russian timezone offset changes of Oct 2014. While this is of no
particular concern for a default Postgres build, it was possible for a
build using --with-system-tzdata to fail the tests if the system tzdata
database wasn't au courant. Bjorn Munch and Christoph Berg both complained
about this while packaging 9.4rc1, so we probably shouldn't insist on the
system tzdata being up-to-date. Instead, make an equivalent test using a
zone change that occurred in Venezuela in 2007. With this patch, the
regression tests should pass using any tzdata set from 2012 or later.
(I can't muster much sympathy for somebody using --with-system-tzdata
on a machine whose system tzdata is more than three years out-of-date.)
DST law changes in the Turks & Caicos Islands (America/Grand_Turk) and
in Fiji. New zone Pacific/Bougainville for portions of Papua New Guinea.
Historical changes for Korea and Vietnam.
Unlogged relations are only reset when performing a unclean
restart. That means they have to be synced to disk during clean
shutdowns. During normal processing that's achieved by registering a
buffer's file to be fsynced at the next checkpoint when flushed. But
ResetUnloggedRelations() doesn't go through the buffer manager, so
nothing will force reset relations to disk before the next shutdown
checkpoint.
So just make ResetUnloggedRelations() fsync the newly created main
forks to disk.
Discussion: 20140912112246.GA4984@alap3.anarazel.de
Backpatch to 9.1 where unlogged tables were introduced.
Abhijit Menon-Sen and Andres Freund
Unlogged relations are reset at the end of crash recovery as they're
only synced to disk during a proper shutdown. Unfortunately that and
later steps can fail, e.g. due to running out of space. This reset
was, up to now performed after marking the database as having finished
crash recovery successfully. As out of space errors trigger a crash
restart that could lead to the situation that not all unlogged
relations are reset.
Once that happend usage of unlogged relations could yield errors like
"could not open file "...": No such file or directory". Luckily
clusters that show the problem can be fixed by performing a immediate
shutdown, and starting the database again.
To fix, just call ResetUnloggedRelations(UNLOGGED_RELATION_INIT)
earlier, before marking the database as having successfully recovered.
Discussion: 20140912112246.GA4984@alap3.anarazel.de
Backpatch to 9.1 where unlogged tables were introduced.
Abhijit Menon-Sen and Andres Freund
Fix breakage induced by commits d8d3d2a4f3
and 463f2625a5fb183b6a8925ccde98bb3889f921d9: pg_dumpall has crashed when
attempting to dump from pre-8.1 servers since then, due to faulty
construction of the query used for dumping roles from older servers.
The query was erroneous as of the earlier commit, but it wasn't exposed
unless you tried to use --binary-upgrade, which you presumably wouldn't
with a pre-8.1 server. However commit 463f2625a made it fail always.
In HEAD, also fix additional breakage induced in the same query by
commit 491c029dbc, which evidently wasn't
tested against pre-8.1 servers either.
The bug is only latent in 9.1 because 463f2625a hadn't landed yet, but
it seems best to back-patch all branches containing the faulty query.
Gilles Darold
There was a window in RestoreBackupBlock where a page would be zeroed out,
but not yet locked. If a backend pinned and locked the page in that window,
it saw the zeroed page instead of the old page or new page contents, which
could lead to missing rows in a result set, or errors.
To fix, replace RBM_ZERO with RBM_ZERO_AND_LOCK, which atomically pins,
zeroes, and locks the page, if it's not in the buffer cache already.
In stable branches, the old RBM_ZERO constant is renamed to RBM_DO_NOT_USE,
to avoid breaking any 3rd party extensions that might use RBM_ZERO. More
importantly, this avoids renumbering the other enum values, which would
cause even bigger confusion in extensions that use ReadBufferExtended, but
haven't been recompiled.
Backpatch to all supported versions; this has been racy since hot standby
was introduced.
This fixes a scenario in which pgp_sym_decrypt() failed with "Wrong key
or corrupt data" on messages whose length is 6 less than a power of 2.
Per bug #11905 from Connor Penhale. Fix by Marko Tiikkaja, regression
test case from Jeff Janes.
When the recursive search in dependency.c visits a column and then later
visits the whole table containing the column, it needs to propagate the
drop-context flags for the table to the existing target-object entry for
the column. Otherwise we might refuse the DROP (if not CASCADE) on the
incorrect grounds that there was no automatic drop pathway to the column.
Remarkably, this has not been reported before, though it's possible at
least when an extension creates both a datatype and a table using that
datatype.
Rather than just marking the column as allowed to be dropped, it might
seem good to skip the DROP COLUMN step altogether, since the later DROP
of the table will surely get the job done. The problem with that is that
the datatype would then be dropped before the table (since the whole
situation occurred because we visited the datatype, and then recursed to
the dependent column, before visiting the table). That seems pretty risky,
and the case is rare enough that it doesn't seem worth expending a lot of
effort or risk to make the drops happen in a safe order. So we just play
dumb and delete the column separately according to the existing drop
ordering rules.
Per report from Petr Jelinek, though this is different from his proposed
patch.
Back-patch to 9.1, where extensions were introduced. There's currently
no evidence that such cases can arise before 9.1, and in any case we would
also need to back-patch cb5c2ba2d8 to 9.0
if we wanted to back-patch this.
dict_thesaurus stored phrase IDs in uint16 fields, so it would get confused
and even crash if there were more than 64K entries in the configuration
file. It turns out to be basically free to widen the phrase IDs to uint32,
so let's just do so.
This was complained of some time ago by David Boutin (in bug #7793);
he later submitted an informal patch but it was never acted on.
We now have another complaint (bug #11901 from Luc Ouellette) so it's
time to make something happen.
This is basically Boutin's patch, but for future-proofing I also added a
defense against too many words per phrase. Note that we don't need any
explicit defense against overflow of the uint32 counters, since before that
happens we'd hit array allocation sizes that repalloc rejects.
Back-patch to all supported branches because of the crash risk.
Previously .ready file was created for the timeline history file at the end
of an archive recovery even when WAL archiving was not enabled.
This creation is unnecessary and causes .ready file to remain infinitely.
This commit changes an archive recovery so that it creates .ready file for
the timeline history file only when WAL archiving is enabled.
Backpatch to all supported versions.
In general, datatype I/O functions are supposed to be immutable or at
worst stable. Some contrib I/O functions were, through oversight, not
marked with any volatility property at all, which made them VOLATILE.
Since (most of) these functions actually behave immutably, the erroneous
marking isn't terribly harmful; but it can be user-visible in certain
circumstances, as per a recent bug report from Joe Van Dyk in which a
cast to text was disallowed in an expression index definition.
To fix, just adjust the declarations in the extension SQL scripts. If we
were being very fussy about this, we'd bump the extension version numbers,
but that seems like more trouble (for both developers and users) than the
problem is worth.
A fly in the ointment is that chkpass_in actually is volatile, because
of its use of random() to generate a fresh salt when presented with a
not-yet-encrypted password. This is bad because of the general assumption
that I/O functions aren't volatile: the consequence is that records or
arrays containing chkpass elements may have input behavior a bit different
from a bare chkpass column. But there seems no way to fix this without
breaking existing usage patterns for chkpass, and the consequences of the
inconsistency don't seem bad enough to justify that. So for the moment,
just document it in a comment.
Since we're not bumping version numbers, there seems no harm in
back-patching these fixes; at least future installations will get the
functions marked correctly.
The previous coding assumed that we could just let buffers for the
database's old tablespace age out of the buffer arena naturally.
The folly of that is exposed by bug #11867 from Marc Munro: the user could
later move the database back to its original tablespace, after which any
still-surviving buffers would match lookups again and appear to contain
valid data. But they'd be missing any changes applied while the database
was in the new tablespace.
This has been broken since ALTER SET TABLESPACE was introduced, so
back-patch to all supported branches.
pgp_sym_encrypt's option is spelled "sess-key", not "enable-session-key".
Spotted by Jeff Janes.
In passing, improve a comment in pgp-pgsql.c to make it clearer that
the debugging options are intentionally undocumented.
As noted by Noah Misch, my initial cut at fixing bug #11638 didn't cover
all cases where ANALYZE might be invoked in an unsafe context. We need to
test the result of IsInTransactionChain not IsTransactionBlock; which is
notationally a pain because IsInTransactionChain requires an isTopLevel
flag, which would have to be passed down through several levels of callers.
I chose to pass in_outer_xact (ie, the result of IsInTransactionChain)
rather than isTopLevel per se, as that seemed marginally more apropos
for the intermediate functions to know about.
VACUUM and ANALYZE update the target table's pg_class row in-place, that is
nontransactionally. This is OK, more or less, for the statistical columns,
which are mostly nontransactional anyhow. It's not so OK for the DDL hint
flags (relhasindex etc), which might get changed in response to
transactional changes that could still be rolled back. This isn't a
problem for VACUUM, since it can't be run inside a transaction block nor
in parallel with DDL on the table. However, we allow ANALYZE inside a
transaction block, so if the transaction had earlier removed the last
index, rule, or trigger from the table, and then we roll back the
transaction after ANALYZE, the table would be left in a corrupted state
with the hint flags not set though they should be.
To fix, suppress the hint-flag updates if we are InTransactionBlock().
This is safe enough because it's always OK to postpone hint maintenance
some more; the worst-case consequence is a few extra searches of pg_index
et al. There was discussion of instead using a transactional update,
but that would change the behavior in ways that are not all desirable:
in most scenarios we're better off keeping ANALYZE's statistical values
even if the ANALYZE itself rolls back. In any case we probably don't want
to change this behavior in back branches.
Per bug #11638 from Casey Shobe. This has been broken for a good long
time, so back-patch to all supported branches.
Tom Lane and Michael Paquier, initial diagnosis by Andres Freund
If you call PQreset() repeatedly, and the connection cannot be
re-established, the error messages from the failed connection attempts
kept accumulating in the error string.
Fixes bug #11455 reported by Caleb Epstein. Backpatch to all supported
versions.
1. The comparison for matching terms used only the CRC to decide if there's
a match. Two different terms with the same CRC gave a match.
2. It assumed that if the second operand has more terms than the first, it's
never a match. That assumption is bogus, because there can be duplicate
terms in either operand.
Rewrite the implementation in a way that doesn't have those bugs.
Backpatch to all supported versions.
Don't crash if an ispell dictionary definition contains flags but not
any compound affixes. (This isn't a security issue since only superusers
can install affix files, but still it's a bad thing.)
Also, be more careful about detecting whether an affix-file FLAG command
is old-format (ispell) or new-format (myspell/hunspell). And change the
error message about mixed old-format and new-format commands into something
intelligible.
Per bug #11770 from Emre Hasegeli. Back-patch to all supported branches.
The EOF-detection logic in pqReadData was a bit confused about who should
set up the error message in case the kernel gives us read-ready-but-no-data
rather than ECONNRESET or some other explicit error condition. Since the
whole point of this situation is that the lower-level functions don't know
there's anything wrong, pqReadData itself must set up the message. But
keep the assumption that if an errno was reported, a message was set up at
lower levels.
Per bug #11712 from Marko Tiikkaja. It's been like this for a very long
time, so back-patch to all supported branches.
CREATE DATABASE and ALTER DATABASE .. SET TABLESPACE copy the source
database directory on the filesystem level. To ensure the on disk
state is consistent they block out users of the affected database and
force a checkpoint to flush out all data to disk. Unfortunately, up to
now, that checkpoint didn't flush out dirty buffers from unlogged
relations.
That bug means there could be leftover dirty buffers in either the
template database, or the database in its old location. Leading to
problems when accessing relations in an inconsistent state; and to
possible problems during shutdown in the SET TABLESPACE case because
buffers belonging files that don't exist anymore are flushed.
This was reported in bug #10675 by Maxim Boguk.
Fix by Pavan Deolasee, modified somewhat by me. Reviewed by MauMau and
Fujii Masao.
Backpatch to 9.1 where unlogged tables were introduced.
Follow our usual style of providing an "extern" for a standard library
function only when we're also providing the implementation. This avoids
issues when the system headers declare the function slightly differently
than we do, as noted by Caleb Welton.
We might have to go to the extent of probing to see if the system headers
declare the function, but let's not do that until it's demonstrated to be
necessary.
Oversight in commit 9e6b1bf258. Back-patch
to all supported branches, as that was.
Nearly all Paths have parents, but a ResultPath representing an empty FROM
clause does not. Avoid a core dump in such cases. I believe this is only
a hazard for debugging usage, not for production, else we'd have heard
about it before. Nonetheless, back-patch to 9.1 where the troublesome code
was introduced. Noted while poking at bug #11703.
This reverts nearly all of commit 28f6cab61a
in favor of just using the typrelid we already have in pg_dump's TypeInfo
struct for the composite type. As coded, it'd crash if the composite type
had no attributes, since then the query would return no rows.
Back-patch to all supported versions. It seems to not really be a problem
in 9.0 because that version rejects the syntax "create type t as ()", but
we might as well keep the logic similar in all affected branches.
Report and fix by Rushabh Lathia.
Andres Freund