testtablespace is an extra path used as tablespace location in the main
regression test suite, computed from --outputdir as defined by the
caller of pg_regress (current directory if undefined).
This special handling was introduced as of f10589e to be specific to
MSVC, as we let pg_regress' Makefile handle this cleanup in other
environments. This moves the cleanup to the MSVC script running
regression tests instead where needed: check, installcheck and
upgradecheck. I have also checked this patch on MSVC with repeated runs
of each target.
Author: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20200219.142519.437573253063431435.horikyota.ntt@gmail.com
This absorbs a leap-second-related bug fix in localtime.c, and
teaches zic to handle an expiration marker in the leapseconds file.
Neither are of any interest to us (for the foreseeable future
anyway), but we need to stay more or less in sync with upstream.
Also adjust some over-eager changes in the README from commit 957338418.
I have no intention of making changes that require C99 in this code,
until such time as all the live back branches require C99. Otherwise
back-patching will get too exciting.
For the same reason, absorb assorted whitespace and other cosmetic
changes from HEAD into the back branches; mostly this reflects use of
improved versions of pgindent.
All in all then, quite a boring update. But I figured I'd get it
done while I was looking at this code.
On platforms without support for 64bit atomic operations where we also
cannot rely on 64bit reads to have single copy atomicity, such atomics
are implemented using a spinlock based fallback. That means it's not
safe to even read such atomics from within a signal handler (since the
signal handler might run when the spinlock already is held).
To avoid this issue defer global barrier processing out of the signal
handler. Instead of checking local / shared barrier generation to
determine whether to set ProcSignalBarrierPending, introduce
PROCSIGNAL_BARRIER and always set ProcSignalBarrierPending when
receiving such a signal. Additionally avoid redundant work in
ProcessProcSignalBarrier if ProcSignalBarrierPending is unnecessarily.
Also do a small amount of other polishing.
Author: Andres Freund
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20200609193723.eu5ilsjxwdpyxhgz@alap3.anarazel.de
Backpatch: 13-, where the code was introduced.
Don't use fread(), since that doesn't necessarily set errno. We could
use read() instead, but it's even better to use pg_pread(), which
allows us to avoid some extra calls to seek to the desired location in
the file.
Also, advertise a wait event while reading from a file, as we do for
most other places where we're reading data from files.
Patch by me, reviewed by Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmobBw-3573vMosGj06r72ajHsYeKtksT_oTxH8XvTL7DxA@mail.gmail.com
Merge two calls to sendDir() that are exactly the same except for
the fifth argument. Adjust comments to match.
Also, don't bother checking whether tblspc_map_file is NULL. We
initialize it in all cases, so it can't be.
Patch by me, reviewed by Amit Kapila and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CA+TgmoYq+59SJ2zBbP891ngWPA9fymOqntqYcweSDYXS2a620A@mail.gmail.com
Commit 72d422a522 made xlog.c call
sendTablespace() with the 'sizeonly' argument set to true, which
required basebackup.c to export sendTablespace(). However, that's
kind of ugly, so instead defer the call to sendTablespace() until
basebackup.c regains control. That way, it can still be a static
function.
Patch by me, reviewed by Amit Kapila and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CA+TgmoYq+59SJ2zBbP891ngWPA9fymOqntqYcweSDYXS2a620A@mail.gmail.com
Per POSIX this case should produce +0, but buildfarm member fossa
(with icc (ICC) 19.0.5.281 20190815) is reporting -0. icc has a
boatload of unsafe floating-point optimizations, with a corresponding
boatload of not-too-well-documented compiler switches, and it seems our
default use of "-mp1" isn't whacking it hard enough to keep it from
misoptimizing the stanza in dpow() that checks whether y is odd.
There's nothing wrong with that code (seeing that no other buildfarm
member has trouble with it), so I'm content to blame this on the
compiler. But without access to the compiler I'm not going to guess at
what switches might be needed to fix it. For now, tweak the test case
so it will accept either -0 or +0 as a correct answer.
Discussion: https://postgr.es/m/E1jkyFX-0005RR-1Q@gemulon.postgresql.org
I failed to notice that we don't really need to check for y being an
integer in the code path where x = -inf; we already did.
Also make some further cosmetic rearrangements in that spot in hopes
of dodging the seeming compiler bug that buildfarm member fossa is
hitting. And be consistent about declaring variables as "float8"
not "double", since the pre-existing variables in this function are
like that.
Discussion: https://postgr.es/m/E1jkyFX-0005RR-1Q@gemulon.postgresql.org
Convert buffile.c error handling to use ereport. This fixes cases where
I/O errors were indistinguishable from EOF or not reported. Also remove
"%m" from error messages where errno would be bogus. While we're
modifying those strings, add block numbers and short read byte counts
where appropriate.
Back-patch to all supported releases.
Reported-by: Amit Khandekar <amitdkhan.pg@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGJE04G%3D8TLK0DLypT_27D9dR8F1RQgNp0jK6qR0tZGWOw%40mail.gmail.com
Non-zero vacuum_defer_cleanup_age values cause pg_upgrade freezing of
the system catalogs to be incomplete, or do nothing. This will cause
the upgrade to fail in confusing ways.
Reported-by: Laurenz Albe
Discussion: https://postgr.es/m/7d6f6c22ba05ce0c526e9e8b7bfa8105e7da45e6.camel@cybertec.at
Backpatch-through: 9.5
Buildfarm results for commit e532b1d57 reveal the error in my thinking
about the unexpected-EDOM case. I'd supposed this was no longer really
a live issue, but it seems the fix for glibc's bug #3866 is not all that
old, and we still have at least one buildfarm animal (lapwing) with the
bug. Hence, resurrect essentially the previous logic (but, I hope, less
opaquely presented), and explain what it is we're really doing here.
Also, blindly try to fix fossa's failure by tweaking the logic that
figures out whether y is an odd integer when x is -inf. This smells
a whole lot like a compiler bug, but I lack access to icc to try to
pin it down. Maybe doing division instead of multiplication will
dodge the issue.
Discussion: https://postgr.es/m/E1jkU7H-00024V-NZ@gemulon.postgresql.org
Introduce TAR_BLOCK_SIZE and replace many instances of 512 with
the new constant. Introduce function tarPaddingBytesRequired
and use it to replace numerous repetitions of (x + 511) & ~511.
Add preprocessor guards against multiple inclusion to pgtar.h.
Reformat the prototype for tarCreateHeader so it doesn't extend
beyond 80 characters.
Discussion: http://postgr.es/m/CA+TgmobWbfReO9-XFk8urR1K4wTNwqoHx_v56t7=T8KaiEoKNw@mail.gmail.com
Buildfarm results for commit decbe2bfb show that AIX and illumos
have non-POSIX-compliant pow() functions, as do ancient NetBSD
and HPUX releases. While it's dubious how much we should care
about the latter two platforms, the former two are probably enough
reason to put in manual handling of infinite-input cases. Hence,
do so, and clean up the post-pow() error handling to reflect its
now-more-limited scope. (Notably, while we no longer expect to
ever see EDOM from pow(), report it as a domain error if we do.
The former coding had the net effect of expensively converting the
error to ERANGE, which seems highly questionable: if pow() wanted
to report ERANGE, it would have done so.)
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/E1jkU7H-00024V-NZ@gemulon.postgresql.org
Our documentation failed to point out that REPEATABLE READ is really
snapshot isolation, which might be important to some users. Point to
the standard reference paper for this complicated topic.
Likewise, add a reference to the VLDB paper about PostgreSQL SSI, for
technical information about our SSI implementation and how it compares
to S2PL.
While here, add a note about catalog access using a lower isolation
level, per recent user complaint.
Back-patch to all releases.
Reported-by: Kyle Kingsbury <aphyr@jepsen.io>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
Discussion: https://postgr.es/m/16454-9408996bb1750faf%40postgresql.org
Previously, these functions tended to throw underflow errors for
negative-infinity exponents. The correct thing per POSIX is to
return 0, so let's do that instead. (Note that the SQL standard
is silent on such issues, as it lacks the concepts of either Inf
or NaN; so our practice is to follow POSIX whenever a corresponding
C-library function exists.)
Also, add a bunch of test cases verifying that exp() and power()
actually do follow POSIX for Inf and NaN inputs. While this patch
should guarantee that exp() passes the tests, power() will not unless
the platform's pow(3) is fully POSIX-compliant. I already know that
gaur fails some of the tests, and I am suspicious that the Windows
animals will too; the extent of compliance of other old platforms
remains to be seen. We might choose to drop failing test cases, or
to work harder at overriding pow(3) for these cases, but first let's
see just how good or bad the situation is.
Discussion: https://postgr.es/m/582552.1591917752@sss.pgh.pa.us
This patch removes the hardcoded check for superuser privileges when
executing replication origin functions. Instead, execution is revoked
from public, meaning that those functions can be executed by a superuser
and that access to them can be granted.
Author: Martín Marqués
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Masahiko Sawada
Discussion: https:/postgr.es/m/CAPdiE1xJMZOKQL3dgHMUrPqysZkgwzSMXETfKkHYnBAB7-0VRQ@mail.gmail.com
var_samp(numeric) and stddev_samp(numeric) disagreed with their float
cousins about what to do for a single non-null input value that is NaN.
The float versions return NULL on the grounds that the calculation is
only defined for more than one non-null input, which seems like the
right answer. But the numeric versions returned NaN, as a result of
dealing with edge cases in the wrong order. Fix that. The patch
also gets rid of an insignificant memory leak in such cases.
This inconsistency is of long standing, but on the whole it seems best
not to back-patch the change into stable branches; nobody's complained
and it's such an obscure point that nobody's likely to complain.
(Note that v13 and v12 now contain test cases that will notice if we
accidentally back-patch this behavior change in future.)
Report and patch by me; thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/353062.1591898766@sss.pgh.pa.us
When there is just one non-null input value, and it is infinity or NaN,
aggregates such as stddev_pop and covar_pop should produce a NaN
result, because the calculation is not well-defined. They used to do
so, but since we adopted Youngs-Cramer aggregation in commit e954a727f,
they produced zero instead. That's an oversight, so fix it. Add tests
exercising these edge cases.
Affected aggregates are
var_pop(double precision)
stddev_pop(double precision)
var_pop(real)
stddev_pop(real)
regr_sxx(double precision,double precision)
regr_syy(double precision,double precision)
regr_sxy(double precision,double precision)
regr_r2(double precision,double precision)
regr_slope(double precision,double precision)
regr_intercept(double precision,double precision)
covar_pop(double precision,double precision)
corr(double precision,double precision)
Back-patch to v12 where the behavior change was accidentally introduced.
Report and patch by me; thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/353062.1591898766@sss.pgh.pa.us
Unify the grammar of COMMENT, DROP, and SECURITY LABEL further. They
all effectively just take an object address for later processing, so
we can make the grammar more generalized. Some extra checking about
which object types are supported can be done later in the statement
execution.
Discussion: https://www.postgresql.org/message-id/flat/163c00a5-f634-ca52-fc7c-0e53deda8735%402ndquadrant.com
Using --outputdir with a custom output repository has never created by
default the sql/ and expected/ paths generated with contents from
respectively input/ and output/ if they don't exist, while the base
output directory gets created if it does not exist. If sql/ and
expected/ are not present, pg_regress would fail with the path missing,
requiring test scripts to create those extra paths by themselves. This
commit changes pg_regress so as both get created by default if they do
not exist, removing the need for external test scripts to do so.
This cleans up two code paths in the tree for pg_upgrade tests in MSVC
and environments able to use test.sh. sql/ and expected/ were created
as part of each test script, but this is not needed anymore as
pg_regress handles the work now.
Author: Roman Zharkov, Daniel Gustafsson
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/16484-4d89e9cc11241996@postgresql.org
Core by no means makes excessive use of these functions, but quite a large
number of those usages do require the caller to call strlen() on the
returned string. This is quite wasteful since these functions do already
have a good idea of the length of the string, so we might as well just
have them return that.
Reviewed-by: Andrew Gierth
Discussion: https://postgr.es/m/CAApHDvrm2A5x2uHYxsqriO2cUaGcFvND%2BksC9e7Tjep0t2RK_A%40mail.gmail.com
In passing, also remove a few surplus empty lines from pg_ltoa and
pg_ulltoa_n in numutils.c
Reported-by: Andrew Gierth
Discussion: https://postgr.es/m/87y2ou3xuh.fsf@news-spur.riddles.org.uk
Backpatch-through: 13, where these changes were introduced
plpgsql has always executed the query given in a RETURN QUERY command
by opening it as a cursor and then fetching a few rows at a time,
which it turns around and dumps into the function's result tuplestore.
The point of this was to keep from blowing out memory with an oversized
SPITupleTable result (note that while a tuplestore can spill tuples
to disk, SPITupleTable cannot). However, it's rather inefficient, both
because of extra data copying and because of executor entry/exit
overhead. In recent versions, a new performance problem has emerged:
use of a cursor prevents use of a parallel plan for the executed query.
We can improve matters by skipping use of a cursor and having the
executor push result tuples directly into the function's result
tuplestore. However, a moderate amount of new infrastructure is needed
to make that idea work:
* We can use the existing tstoreReceiver.c DestReceiver code to funnel
executor output to the tuplestore, but it has to be extended to support
plpgsql's requirement for possibly applying a tuple conversion map.
* SPI needs to be extended to allow use of a caller-supplied
DestReceiver instead of its usual receiver that puts tuples into
a SPITupleTable. Two new API calls are needed to handle both the
RETURN QUERY and RETURN QUERY EXECUTE cases.
I also felt that I didn't want these new API calls to use the legacy
method of specifying query parameter values with "char" null flags
(the old ' '/'n' convention); rather they should accept ParamListInfo
objects containing the parameter type and value info. This required
a bit of additional new infrastructure since we didn't yet have any
parse analysis callback that would interpret $N parameter symbols
according to type data supplied in a ParamListInfo. There seems to be
no harm in letting makeParamList install that callback by default,
rather than leaving a new ParamListInfo's parserSetup hook as NULL.
(Indeed, as of HEAD, I couldn't find anyplace that was using the
parserSetup field at all; plpgsql was using parserSetupArg for its
own purposes, but parserSetup seemed to be write-only.)
We can actually get plpgsql out of the business of using legacy null
flags altogether, and using ParamListInfo instead of its ad-hoc
PreparedParamsData structure; but this requires inventing one more
SPI API call that can replace SPI_cursor_open_with_args. That seems
worth doing, though.
SPI_execute_with_args and SPI_cursor_open_with_args are now unused
anywhere in the core PG distribution. Perhaps someday we could
deprecate/remove them. But cleaning up the crufty bits of the SPI
API is a task for a different patch.
Per bug #16040 from Jeremy Smith. This is unfortunately too invasive to
consider back-patching. Patch by me; thanks to Hamid Akhtar for review.
Discussion: https://postgr.es/m/16040-eaacad11fecfb198@postgresql.org
Rewrite the documentation of these functions, in light of recent bug fix
commit 5940ffb2.
Back-patch to 13 where the check-for-conflict-out code was split up into
AM-specific and generic parts, and new documentation was added that now
looked wrong.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
When merging two NumericAggStates, the code missed adding the new
state's NaNcount unless its N was also nonzero; since those counts
are independent, this is wrong.
This would only have visible effect if some partial aggregate scans
found only NaNs while earlier ones found only non-NaNs; then we could
end up falsely deciding that there were no NaNs and fail to return a
NaN final result as expected. That's pretty improbable, so it's no
surprise this hasn't been reported from the field. Still, it's a bug.
I didn't try to produce a regression test that would show the bug,
but I did notice that these functions weren't being reached at all
in our regression tests, so I improved the tests to at least
exercise them. With these additions, I see pretty complete code
coverage on the aggregation-related functions in numeric.c.
Back-patch to 9.6 where this code was introduced. (I only added
the improved test case as far back as v10, though, since the
relevant part of aggregates.sql isn't there at all in 9.6.)
Eliminate enable_groupingsets_hash_disk, which was primarily useful
for testing grouping sets that use HashAgg and spill. Instead, hack
the table stats to convince the planner to choose hashed aggregation
for grouping sets that will spill to disk. Suggested by Melanie
Plageman.
Rename enable_hashagg_disk to hashagg_avoid_disk_plan, and invert the
meaning of on/off. The new name indicates more strongly that it only
affects the planner. Also, the word "avoid" is less definite, which
should avoid surprises when HashAgg still needs to use the
disk. Change suggested by Justin Pryzby, though I chose a different
GUC name.
Discussion: https://postgr.es/m/CAAKRu_aisiENMsPM2gC4oUY1hHG3yrCwY-fXUg22C6_MJUwQdA%40mail.gmail.com
Discussion: https://postgr.es/m/20200610021544.GA14879@telsasoft.com
Backpatch-through: 13
SSI's HeapCheckForSerializableConflictOut() test failed to correctly
handle conditions involving a concurrently inserted tuple which is later
concurrently updated by a separate transaction . A SELECT statement
that called HeapCheckForSerializableConflictOut() could end up using the
same XID (updater's XID) for both the original tuple, and the successor
tuple, missing the XID of the xact that created the original tuple
entirely. This only happened when neither tuple from the chain was
visible to the transaction's MVCC snapshot.
The observable symptoms of this bug were subtle. A pair of transactions
could commit, with the later transaction failing to observe the effects
of the earlier transaction (because of the confusion created by the
update to the non-visible row). This bug dates all the way back to
commit dafaa3ef, which added SSI.
To fix, make sure that we check the xmin of concurrently inserted tuples
that happen to also have been updated concurrently.
Author: Peter Geoghegan
Reported-By: Kyle Kingsbury
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443@jepsen.io
Backpatch: All supported versions
Michael Paquier