Don't use fread(), since that doesn't necessarily set errno. We could
use read() instead, but it's even better to use pg_pread(), which
allows us to avoid some extra calls to seek to the desired location in
the file.
Also, advertise a wait event while reading from a file, as we do for
most other places where we're reading data from files.
Patch by me, reviewed by Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmobBw-3573vMosGj06r72ajHsYeKtksT_oTxH8XvTL7DxA@mail.gmail.com
Our documentation failed to point out that REPEATABLE READ is really
snapshot isolation, which might be important to some users. Point to
the standard reference paper for this complicated topic.
Likewise, add a reference to the VLDB paper about PostgreSQL SSI, for
technical information about our SSI implementation and how it compares
to S2PL.
While here, add a note about catalog access using a lower isolation
level, per recent user complaint.
Back-patch to all releases.
Reported-by: Kyle Kingsbury <aphyr@jepsen.io>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
Discussion: https://postgr.es/m/16454-9408996bb1750faf%40postgresql.org
This patch removes the hardcoded check for superuser privileges when
executing replication origin functions. Instead, execution is revoked
from public, meaning that those functions can be executed by a superuser
and that access to them can be granted.
Author: Martín Marqués
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Masahiko Sawada
Discussion: https:/postgr.es/m/CAPdiE1xJMZOKQL3dgHMUrPqysZkgwzSMXETfKkHYnBAB7-0VRQ@mail.gmail.com
plpgsql has always executed the query given in a RETURN QUERY command
by opening it as a cursor and then fetching a few rows at a time,
which it turns around and dumps into the function's result tuplestore.
The point of this was to keep from blowing out memory with an oversized
SPITupleTable result (note that while a tuplestore can spill tuples
to disk, SPITupleTable cannot). However, it's rather inefficient, both
because of extra data copying and because of executor entry/exit
overhead. In recent versions, a new performance problem has emerged:
use of a cursor prevents use of a parallel plan for the executed query.
We can improve matters by skipping use of a cursor and having the
executor push result tuples directly into the function's result
tuplestore. However, a moderate amount of new infrastructure is needed
to make that idea work:
* We can use the existing tstoreReceiver.c DestReceiver code to funnel
executor output to the tuplestore, but it has to be extended to support
plpgsql's requirement for possibly applying a tuple conversion map.
* SPI needs to be extended to allow use of a caller-supplied
DestReceiver instead of its usual receiver that puts tuples into
a SPITupleTable. Two new API calls are needed to handle both the
RETURN QUERY and RETURN QUERY EXECUTE cases.
I also felt that I didn't want these new API calls to use the legacy
method of specifying query parameter values with "char" null flags
(the old ' '/'n' convention); rather they should accept ParamListInfo
objects containing the parameter type and value info. This required
a bit of additional new infrastructure since we didn't yet have any
parse analysis callback that would interpret $N parameter symbols
according to type data supplied in a ParamListInfo. There seems to be
no harm in letting makeParamList install that callback by default,
rather than leaving a new ParamListInfo's parserSetup hook as NULL.
(Indeed, as of HEAD, I couldn't find anyplace that was using the
parserSetup field at all; plpgsql was using parserSetupArg for its
own purposes, but parserSetup seemed to be write-only.)
We can actually get plpgsql out of the business of using legacy null
flags altogether, and using ParamListInfo instead of its ad-hoc
PreparedParamsData structure; but this requires inventing one more
SPI API call that can replace SPI_cursor_open_with_args. That seems
worth doing, though.
SPI_execute_with_args and SPI_cursor_open_with_args are now unused
anywhere in the core PG distribution. Perhaps someday we could
deprecate/remove them. But cleaning up the crufty bits of the SPI
API is a task for a different patch.
Per bug #16040 from Jeremy Smith. This is unfortunately too invasive to
consider back-patching. Patch by me; thanks to Hamid Akhtar for review.
Discussion: https://postgr.es/m/16040-eaacad11fecfb198@postgresql.org
Eliminate enable_groupingsets_hash_disk, which was primarily useful
for testing grouping sets that use HashAgg and spill. Instead, hack
the table stats to convince the planner to choose hashed aggregation
for grouping sets that will spill to disk. Suggested by Melanie
Plageman.
Rename enable_hashagg_disk to hashagg_avoid_disk_plan, and invert the
meaning of on/off. The new name indicates more strongly that it only
affects the planner. Also, the word "avoid" is less definite, which
should avoid surprises when HashAgg still needs to use the
disk. Change suggested by Justin Pryzby, though I chose a different
GUC name.
Discussion: https://postgr.es/m/CAAKRu_aisiENMsPM2gC4oUY1hHG3yrCwY-fXUg22C6_MJUwQdA%40mail.gmail.com
Discussion: https://postgr.es/m/20200610021544.GA14879@telsasoft.com
Backpatch-through: 13
In PostgreSQL 10, we stopped using System V semaphores on Linux
systems. Update the example we give of an error message from a
misconfigured system to show what people are most likely to see these
days.
Back-patch to 10, where PREFERRED_SEMAPHORES=UNNAMED_POSIX arrived.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGLmJUSwybaPQv39rB8ABpqJq84im2UjZvyUY4feYhpWMw%40mail.gmail.com
Whitespace between tags is significant, and in some cases it creates
extra vertical space in man pages. The fix is either to remove some
newlines or in some cases to reword slightly to avoid the awkward
markup layout.
Remove obsolete instructions for old operating system versions, and
update the text to reflect the defaults on modern systems.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/CA%2BhUKGLmJUSwybaPQv39rB8ABpqJq84im2UjZvyUY4feYhpWMw%40mail.gmail.com
The preferred terminology has been support "function", not procedure,
for some time, so change that over. The command stays \dAp, since
\dAf is already something else.
The group of wal_init_zero and wal_recycle is WAL_SETTINGS in guc.c,
but previously their documents were located in
"Replication"/"Sending Servers" section. This commit moves them to
the proper section "Write Ahead Log"/"Settings".
Back-patch to v12 where wal_init_zero and wal_recycle parameters
were introduced.
Author: Fujii Masao
Discussion: https://postgr.es/m/b5190ab4-a169-6a42-0e49-aed0807c8976@oss.nttdata.com
The documentation of REINDEX includes a complete description of
CONCURRENTLY and its advantages as well as its disadvantages, but
reindexdb was not really clear about all that.
From discussion with Tom Lane, based on a report from Andrey Klychkov.
Discussion: https://postgr.es/m/1590486572.205117372@f500.i.mail.ru
Backpatch-through: 12
This commit updates the "Viewing Statistics" section more like
the existing catalogs chapter.
- Change its layout so that an introductory paragrap is put above
the table for each statistics view. Previously the explanations
were below the tables.
- Separate each view to different section and add index terms for them.
Author: Fujii Masao
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/6f8a482c-b3fa-4ed9-21c3-6d222a2cb87d@oss.nttdata.com
These were missed when these were added to pg_hba.conf in PG 12;
updates docs and pg_hba.conf.sample.
Reported-by: Arthur Nascimento
Bug: 16380
Discussion: https://postgr.es/m/20200421182736.GG19613@momjian.us
Backpatch-through: 12
Explain that the followings are tracked only when track_io_timing GUC
is enabled.
- blk_read_time and blk_write_time in pg_stat_database
- time spent reading and writing data file blocks in EXPLAIN output
with BUFFERS option
Whther track_io_timing is enabled affects also blk_read_time and
blk_write_time in pg_stat_statements, but which was already documented.
Author: Atsushi Torikoshi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CACZ0uYHo_NwbxpLH76OGF-O=13tkR0ZM0zeyGEhZ+JEXZVRyCA@mail.gmail.com
The B-Tree index deduplication strategy used during CREATE INDEX and
REINDEX differs from the lazy strategy used by retail inserts. Make
that clear by adding a new paragraph to the B-Tree implementation
section of the documentation.
In passing, do some copy-editing of nearby deduplication documentation.
The description missed a comma and lacked an explanation of what happens
with REPLICA IDENTITY USING INDEX when the dependent index is dropped.
Author: Marina Polyakova
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/ad1a0badc32658b1bbb07aa312346a1d@postgrespro.ru
Backpatch-through: 9.5
Synchronize the event names for parallel hash join waits with other
event names, by getting rid of the slashes and dropping "-ing"
suffixes. Rename ClogGroupUpdate to XactGroupUpdate, to match the
new SLRU name. Move the ProcSignalBarrier event to the IPC category;
it doesn't belong under IO.
Also a bit more wordsmithing in the wait event documentation tables.
Discussion: https://postgr.es/m/4505.1589640417@sss.pgh.pa.us
d140f2f3 has renamed receivedUpto to flushedUpto, and has added
writtenUpto to the WAL receiver's shared memory information, but
pg_stat_wal_receiver was not consistent with that. This commit renames
received_lsn to flushed_lsn, and adds a new column called written_lsn.
Bump catalog version.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20200515090817.GA212736@paquier.xyz
libpq's exports.txt was overlooked in commit 36d108761, which the
buildfarm is quite unhappy about.
Also, I'd gathered that the plan included renaming PQgetSSLKeyPassHook
to PQgetSSLKeyPassHook_OpenSSL, but that didn't happen in the patch
as committed. I'm taking it on my own authority to do so now, since
the window before beta1 is closing fast.
4dc6355210 provided a way for libraries and clients to modify how libpq
handles client certificate passphrases, by installing a hook. However,
these routines are quite specific to how OpenSSL works, so it's
misleading and not future-proof to have these names not refer to OpenSSL.
Change all the names to add "_OpenSSL" after "Hook", and fix the docs
accordingly.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/981DE552-E399-45C2-9F60-3F0E3770CC61@yesql.se
Robert Haas