This allows using text position search functions with nondeterministic
collations. These functions are
- position, strpos
- replace
- split_part
- string_to_array
- string_to_table
which all use common internal infrastructure.
There was previously no internal implementation of this, so it was met
with a not-supported error. This adds the internal implementation and
removes the error.
Unlike with deterministic collations, the search cannot use any
byte-by-byte optimized techniques but has to go substring by
substring. We also need to consider that the found match could have a
different length than the needle and that there could be substrings of
different length matching at a position. In most cases, we need to
find the longest such substring (greedy semantics), but this can be
configured by each caller.
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://www.postgresql.org/message-id/flat/582b2613-0900-48ca-8b0d-340c06f4d400@eisentraut.org
The bibliography entries for olsen93 and ong90 lacked links to
online copies. While ong90 is available in digital form, the
olsen93 thesis is only available as a physical copy in the UCB
library. To save people from searching for it, we still link
to it via the UCB library page.
Reported-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxFcJYdRvzgt59N26XjFp2tFFUXu+VN+x8Uo0NbDUCMCbw@mail.gmail.com
Previously, a WARNING was issued at the time of defining a subscription
with origin=NONE only when the publisher subscribed to the same table from
other publishers, indicating potential data origination from different
origins. However, the publisher can subscribe to the partition ancestors
or partition children of the table from other publishers, which could also
result in mixed-origin data inclusion. So, give a WARNING in those cases
as well.
Reported-by: Sergey Tatarintsev <s.tatarintsev@postgrespro.ru>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16, where it was introduced
Discussion: https://postgr.es/m/5eda6a9c-63cf-404d-8a49-8dcb116a29f3@postgrespro.ru
The type argument wasn't actually really necessary. It was a remnant
of converting the API of the gist strategy translation from using
opclass to using opfamily+opcintype (commits c09e5a6a01,
622f678c10). For looking up the gist translation function, we used
the convention "amproclefttype = amprocrighttype = opclass's
opcintype" (see pg_amproc.h). But each operator family should only
have one translation function, and getting the right type for the
lookup is sometimes cumbersome and fragile, so this is all
unnecessarily complicated.
To simplify this, change the gist stategy support procedure to take
"any", "any" as argument. (This is arbitrary but seems intuitive.
The alternative of using InvalidOid as argument(s) upsets various DDL
commands, so it's not practical.) Then we don't need opcintype for
the lookup, and we can remove it from all the API layers introduced by
commit c09e5a6a01.
This also adds some more documentation about the correct signature of
the gist support function and adds more checks in gistvalidate().
This was previously underspecified. (It relied implicitly on
convention mentioned above.)
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
With \bind, \parse, \bind_named and \close, it is possible to issue
queries from psql using the extended protocol. However, it was not
possible to send these queries using libpq's pipeline mode. This
feature has two advantages:
- Testing. Pipeline tests were only possible with pgbench, using TAP
tests. It now becomes possible to have more SQL tests that are able to
stress the backend with pipelines and extended queries. More tests will
be added in a follow-up commit that were discussed on some other
threads. Some external projects in the community had to implement their
own facility to work around this limitation.
- Emulation of custom workloads, with more control over the actions
taken by a client with libpq APIs. It is possible to emulate more
workload patterns to bottleneck the backend with the extended query
protocol.
This patch adds six new meta-commands to be able to control pipelines:
* \startpipeline starts a new pipeline. All extended queries are queued
until the end of the pipeline are reached or a sync request is sent and
processed.
* \endpipeline ends an existing pipeline. All queued commands are sent
to the server and all responses are processed by psql.
* \syncpipeline queues a synchronisation request, without flushing the
commands to the server, equivalent of PQsendPipelineSync().
* \flush, equivalent of PQflush().
* \flushrequest, equivalent of PQsendFlushRequest()
* \getresults reads the server's results for the queries in a pipeline.
Unsent data is automatically pushed when \getresults is called. It is
possible to control the number of results read in a single meta-command
execution with an optional parameter, 0 means that all the results
should be read.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/CAO6_XqroE7JuMEm1sWz55rp9fAYX2JwmcP_3m_v51vnOFdsLiQ@mail.gmail.com
On FreeBSD the ftp/curl port appears to be missing a minimum
version dependency on libssh2, so the following starts showing
up after upgrading to curl 8.11.1_1:
libcurl.so.4: Undefined symbol "libssh2_session_callback_set2"
Awaiting an upgrade of the FreeBSD CI images to version 14, work
around the issue.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAOYmi+kZAka0sdxCOBxsQc2ozEZGZKHWU_9nrPXg3sG1NJ-zJw@mail.gmail.com
This commit implements OAUTHBEARER, RFC 7628, and OAuth 2.0 Device
Authorization Grants, RFC 8628. In order to use this there is a
new pg_hba auth method called oauth. When speaking to a OAuth-
enabled server, it looks a bit like this:
$ psql 'host=example.org oauth_issuer=... oauth_client_id=...'
Visit https://oauth.example.org/login and enter the code: FPQ2-M4BG
Device authorization is currently the only supported flow so the
OAuth issuer must support that in order for users to authenticate.
Third-party clients may however extend this and provide their own
flows. The built-in device authorization flow is currently not
supported on Windows.
In order for validation to happen server side a new framework for
plugging in OAuth validation modules is added. As validation is
implementation specific, with no default specified in the standard,
PostgreSQL does not ship with one built-in. Each pg_hba entry can
specify a specific validator or be left blank for the validator
installed as default.
This adds a requirement on libcurl for the client side support,
which is optional to build, but the server side has no additional
build requirements. In order to run the tests, Python is required
as this adds a https server written in Python. Tests are gated
behind PG_TEST_EXTRA as they open ports.
This patch has been a multi-year project with many contributors
involved with reviews and in-depth discussions: Michael Paquier,
Heikki Linnakangas, Zhihong Yu, Mahendrakar Srinivasarao, Andrey
Chudnovsky and Stephen Frost to name a few. While Jacob Champion
is the main author there have been some levels of hacking by others.
Daniel Gustafsson contributed the validation module and various bits
and pieces; Thomas Munro wrote the client side support for kqueue.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Kashif Zeeshan <kashi.zeeshan@gmail.com>
Discussion: https://postgr.es/m/d1b467a78e0e36ed85a09adf979d04cf124a9d4b.camel@vmware.com
Add support to pg_dump for dumping stats, and use that during
pg_upgrade so that statistics are transferred during upgrade. In most
cases this removes the need for a costly re-analyze after upgrade.
Some statistics are not transferred, such as extended statistics or
statistics with a custom stakind.
Now pg_dump accepts the options --schema-only, --no-schema,
--data-only, --no-data, --statistics-only, and --no-statistics; which
allow all combinations of schema, data, and/or stats. The options are
named this way to preserve compatibility with the previous
--schema-only and --data-only options.
Statistics are in SECTION_DATA, unless the object itself is in
SECTION_POST_DATA.
The stats are represented as calls to pg_restore_relation_stats() and
pg_restore_attribute_stats().
Author: Corey Huinker, Jeff Davis
Reviewed-by: Jian He
Discussion: https://postgr.es/m/CADkLM=fzX7QX6r78fShWDjNN3Vcr4PVAnvXxQ4DiGy6V=0bCUA@mail.gmail.com
Discussion: https://postgr.es/m/CADkLM%3DcB0rF3p_FuWRTMSV0983ihTRpsH%2BOCpNyiqE7Wk0vUWA%40mail.gmail.com
Before executing a cached generic plan, AcquireExecutorLocks() in
plancache.c locks all relations in a plan's range table to ensure the
plan is safe for execution. However, this locks runtime-prunable
relations that will later be pruned during "initial" runtime pruning,
introducing unnecessary overhead.
This commit defers locking for such relations to executor startup and
ensures that if the CachedPlan is invalidated due to concurrent DDL
during this window, replanning is triggered. Deferring these locks
avoids unnecessary locking overhead for pruned partitions, resulting
in significant speedup, particularly when many partitions are pruned
during initial runtime pruning.
* Changes to locking when executing generic plans:
AcquireExecutorLocks() now locks only unprunable relations, that is,
those found in PlannedStmt.unprunableRelids (introduced in commit
cbc127917e), to avoid locking runtime-prunable partitions
unnecessarily. The remaining locks are taken by
ExecDoInitialPruning(), which acquires them only for partitions that
survive pruning.
This deferral does not affect the locks required for permission
checking in InitPlan(), which takes place before initial pruning.
ExecCheckPermissions() now includes an Assert to verify that all
relations undergoing permission checks, none of which can be in the
set of runtime-prunable relations, are properly locked.
* Plan invalidation handling:
Deferring locks introduces a window where prunable relations may be
altered by concurrent DDL, invalidating the plan. A new function,
ExecutorStartCachedPlan(), wraps ExecutorStart() to detect and handle
invalidation caused by deferred locking. If invalidation occurs,
ExecutorStartCachedPlan() updates CachedPlan using the new
UpdateCachedPlan() function and retries execution with the updated
plan. To ensure all code paths that may be affected by this handle
invalidation properly, all callers of ExecutorStart that may execute a
PlannedStmt from a CachedPlan have been updated to use
ExecutorStartCachedPlan() instead.
UpdateCachedPlan() replaces stale plans in CachedPlan.stmt_list. A new
CachedPlan.stmt_context, created as a child of CachedPlan.context,
allows freeing old PlannedStmts while preserving the CachedPlan
structure and its statement list. This ensures that loops over
statements in upstream callers of ExecutorStartCachedPlan() remain
intact.
ExecutorStart() and ExecutorStart_hook implementations now return a
boolean value indicating whether plan initialization succeeded with a
valid PlanState tree in QueryDesc.planstate, or false otherwise, in
which case QueryDesc.planstate is NULL. Hook implementations are
required to call standard_ExecutorStart() at the beginning, and if it
returns false, they should do the same without proceeding.
* Testing:
To verify these changes, the delay_execution module tests scenarios
where cached plans become invalid due to changes in prunable relations
after deferred locks.
* Note to extension authors:
ExecutorStart_hook implementations must verify plan validity after
calling standard_ExecutorStart(), as explained earlier. For example:
if (prev_ExecutorStart)
plan_valid = prev_ExecutorStart(queryDesc, eflags);
else
plan_valid = standard_ExecutorStart(queryDesc, eflags);
if (!plan_valid)
return false;
<extension-code>
return true;
Extensions accessing child relations, especially prunable partitions,
via ExecGetRangeTableRelation() must now ensure their RT indexes are
present in es_unpruned_relids (introduced in commit cbc127917e), or
they will encounter an error. This is a strict requirement after this
change, as only relations in that set are locked.
The idea of deferring some locks to executor startup, allowing locks
for prunable partitions to be skipped, was first proposed by Tom Lane.
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: David Rowley <dgrowleyml@gmail.com> (earlier versions)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier versions)
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
The current implementation inconsistently includes public schema but not
information_schema when those are specified in FOR TABLES IN SCHMEA ...
Apart from that, the current behavior for publications w.r.t exclude table
and schema (--exclude-table, --exclude-schema) option differs from what we
do at other places. We try to avoid including publications for
corresponding tables or schemas when an exclude-table or exclude-schema
option is given, unlike what we do for views using functions defined in a
particular schema or a subscription pointing to publications with their
corresponding exclude options.
I decided not to backpatch this as it leads to a behavior change and we don't
see any field report for current behavior.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/1270733.1734134272@sss.pgh.pa.us
This commit adds a short description of what kind of activity is tracked
in pg_stat_io for the object "wal", with a link pointing to the section
"WAL configuration" that has a lot of details on the matter.
This should perhaps have been added in a051e71e28, but things are what
they are.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z7RkQ0EfYaqqjgz/@ip-10-97-1-34.eu-west-3.compute.internal
Since a051e71e28, pg_stat_io is able to track statistics for the WAL
activity, providing an equivalent of pg_stat_wal with more granularity
for the fsyncs/writes counts and timings, as the data is split across
backend types.
This commit now recommends pg_stat_io rather than pg_stat_wal in the
section "WAL configuration", some of the latter's attributes being
candidate for removal in a follow-up commit.
Extracted from a larger patch by the same author.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z7RkQ0EfYaqqjgz/@ip-10-97-1-34.eu-west-3.compute.internal
If the requested recovery timeline is not reachable, the logged
checkpoint and timeline should to be the values read from the
backup_label when it is defined. The message generated used the values
from the control file in this case, which is fine when recovering from
the control file without a backup_label, but not if there is a
backup_label.
Issue introduced in ee994272ca. v15 has introduced xlogrecovery.c and
more simplifications in this area (4a92a1c3d1, a27048cbcb), making
this change a bit simpler to think about, so backpatch only down to this
version.
Author: David Steele <david@pgbackrest.org>
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Benoit Lobréau <benoit.lobreau@dalibo.com>
Discussion: https://postgr.es/m/c3d617d4-1696-4aa7-8a4d-5a7d19cc5618@pgbackrest.org
Backpatch-through: 15
pgbench already had code to check if the soft rlimit is too low for the
specified number of connections. If too low, it errored out, telling the user
to increase the limit.
However, we can do better: If the hard limit allows, increase the soft limit
to be sufficiently for the number of connections.
It is common for the soft limit to be considerably lower than the hard limit,
due to the danger of soft limits > 1024 breaking programs that use the
select(2), as explained in [1].
[1]: https://0pointer.net/blog/file-descriptor-limits.html
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAGECzQQh6VSy3KG4pN1d%3Dh9J%3DD1rStFCMR%2Bt7yh_Kwj-g87aLQ%40mail.gmail.com
Since commit 29cf61ade3, table_block_relation_estimate_size() considers
fillfactor when estimating number of rows in a relation before the first
ANALYZE. The formula however did not consider tuples may be larger than
available space determined by fillfactor, ending with density 0. This
ultimately means the relation was estimated to contain a single row.
The executor however places at least one tuple per page, even with very
low fillfactor values, so the density should be at least 1. Fixed by
clamping the density estimate using clamp_row_est().
Reported by Heikki Linnakangas. Fix by me, with regression test inspired
by example provided by Heikki.
Backpatch to 17, where the issue was introduced.
Reported-by: Heikki Linnakangas
Backpatch-through: 17
Discussion: https://postgr.es/m/2bf9d973-7789-4937-a7ca-0af9fb49c71e@iki.fi
These functions should be called at most once per ResultRelInfo;
it's wasteful to do otherwise, and certainly the pattern of
opening twice and then closing twice is a bad idea. Moreover,
aminsertcleanup functions might not be prepared to be called twice,
as the just-hardened code in BRIN demonstrates.
This amounts to an API change, since such coding patterns were
safe even if wasteful before v17. Hence, apply to HEAD only.
(Extension code violating this new rule faces some risk in v17,
but we just fixed brininsertcleanup and there are probably few
other aminsertcleanup functions as yet. So the odds of breaking
usable code seem higher than the odds of doing something useful
with a back-patch.)
Bug: #18815
Reported-by: Sergey Belyashov <sergey.belyashov@gmail.com>
Discussion: https://postgr.es/m/18815-2a0407cc7f40b327@postgresql.org
Logical replication crashes if the subscriber's partitioned table
has a BRIN index. There are two independently blamable causes,
and this patch fixes both:
1. brininsertcleanup fails if called twice for the same IndexInfo,
because it half-destroys its BrinInsertState but leaves it still
linked from ii_AmCache. brininsert would also fail in that state,
so it's pretty hard to see any advantage to this coding. Fully
remove the BrinInsertState, instead, so that a new brininsert
call would create a new cache.
2. A logical replication subscriber sometimes does ExecOpenIndices
twice on the same ResultRelInfo, followed by doing ExecCloseIndices
twice; the second call reaches the brininsertcleanup bug. Quite
aside from tickling unexpected cases in aminsertcleanup methods,
this seems very wasteful, because the IndexInfos built in the
first ExecOpenIndices call are just lost during the second call,
and have to be rebuilt at possibly-nontrivial cost. We should
establish a coding rule that you don't do that.
The problematic coding is that when the target table is partitioned,
apply_handle_tuple_routing calls ExecFindPartition which does
ExecOpenIndices (and expects that ExecCleanupTupleRouting will
close the indexes again). Using the ResultRelInfo made by
ExecFindPartition, it calls apply_handle_delete_internal or
apply_handle_insert_internal, both of which think they need to do
ExecOpenIndices/ExecCloseIndices for themselves. They do in the main
non-partitioned code paths, but not here. The simplest fix is to pull
their ExecOpenIndices/ExecCloseIndices calls out and put them in the
call sites for the non-partitioned cases. (We could have refactored
apply_handle_update_internal similarly, but I did not do so today
because there's no bug there: the partitioned code path doesn't
call it.)
Also, remove the always-duplicative open/close calls within
apply_handle_tuple_routing itself.
Since brininsertcleanup and indeed the whole aminsertcleanup mechanism
are new in v17, there's no observable bug in older branches. A case
could be made for trying to avoid these duplicative open/close calls
in the older branches, but for now it seems not worth the trouble and
risk of new bugs.
Bug: #18815
Reported-by: Sergey Belyashov <sergey.belyashov@gmail.com>
Discussion: https://postgr.es/m/18815-2a0407cc7f40b327@postgresql.org
Backpatch-through: 17
Until now ExecChooseHashTableSize() considered only the size of the
in-memory hash table, and ignored the memory needed for the batch files.
Which can be a significant amount, because each batch needs two BufFiles
(each with a BLCKSZ buffer). The same issue applies to increasing the
number of batches during execution.
It's also possible to trigger a "batch explosion", e.g. due to duplicate
values or skew. We've seen reports of joins with hundreds of thousands
(or even millions) of batches, consuming gigabytes of memory, triggering
OOM errors. These cases may be fairly rare, but it's clearly possible to
hit them.
These issues can't be prevented during planning. Even if we improve
that, it does not help with execution-time batch explosion. We can
however reduce the impact and use as little memory as possible.
This patch improves the behavior by adjusting how the memory is divided
between the hash table and batch files. It may be better to use fewer
batch files, even if it means the hash table will exceed the limit.
The capacity of the hash node may be increased either by doubling he
number of batches, or doubling the size of the in-memory hash table. The
outcome is the same, but the memory usage may be very different. For low
nbatch values it's better to add batches, for high nbatch values it's
better to allow a larger hash table.
The patch considers both options, both during the initial sizing and
then during execution, to minimize how much the limit gets exceeded.
It might seem this patch is relaxing the memory limit - allowing it to
be exceeded. But that's not really the case. It has always been like
that, except the memory used by batches was ignored.
Allowing the hash table to grow may also prevent the batch explosion.
If there's a large batch that can't be split (due to hash collisions or
duplicate values), at some point the memory limit will increase enough
for the batch to fit into the hash table.
This patch was in the works for a long time. The early versions were
posted in 2019, and revived every year or two when we happened to get
the next report of OOM due to a hashjoin batch explosion. Each of those
patch versions were reviewed by a couple people. I'm mentioning only
Melanie Plageman and Robert Haas, because they reviewed the last
version, and the older patches are very different.
Reviewed-by: Melanie Plageman, Robert Haas
Discussion: https://postgr.es/m/7bed6c08-72a0-4ab9-a79c-e01fcdd0940f@vondra.me
Discussion: https://postgr.es/m/20190504003414.bulcbnge3rhwhcsh%40development
Discussion: https://postgr.es/m/20190428141901.5dsbge2ka3rxmpk6%40development
This addresses various corner cases in BackgroundPsql:
- On windows stdout and stderr may arrive out of order, leading to errors not
being reported, or attributed to the wrong statement.
To fix, emit the "query-separation banner" on both stdout and stderr and
wait for both.
- Very occasionally the "query-separation banner" would not get removed, because
we waited until the banner arrived, but then replaced the banner plus
newline.
To fix, wait for banner and newline.
- For interactive psql replacing $banner\n is not sufficient, interactive psql
outputs \r\n.
- For interactive psql, where commands are echoed to stdout, the \echo
command, rather than its output, would be matched.
This would sometimes lead to output from the prior query, or wait_connect(),
being returned in the next command.
This also affected wait_connect(), leading to sometimes sending queries to
psql before the connection actually was established.
While debugging these issues I also found that it's hard to know whether a
query separation banner was attributed to the right query. Make that easier by
counting the queries each BackgroundPsql instance has emitted and include the
number in the banner.
Also emit psql stdout/stderr in query() and wait_connect() as Test::More
notes, without that it's rather hard to debug some issues in CI and buildfarm.
As this can cause issues not just to-be-added tests, but also existing ones,
backpatch the fix to all supported versions.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/wmovm6xcbwh7twdtymxuboaoarbvwj2haasd3sikzlb3dkgz76@n45rzycluzft
Backpatch-through: 13
Replace the use of Constraint with a new ATAlterConstraint struct, which
allows us to pass additional information. No functionality is added by
this commit. This is necessary for future work that allows altering
constraints in other ways.
I (Álvaro) took the liberty of restructuring the code for ALTER
CONSTRAINT beyond what Amul did. The original coding before Amul's
patch was unnecessarily baroque, and this change makes things simpler
by removing one level of subroutine. Also, partly remove the assumption
that only partitioned tables are relevant (by passing sensible 'recurse'
arguments) and no longer ignore whether ONLY was specified. I say
'partly' because the current coding only walks down via the 'conparentid'
relationship, which is only used for partitioned tables; but future
patches could handle ONLY or not for other types of constraint changes
for legacy inheritance trees too.
Author: Amul Sul <sulamul@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAAJ_b94bfgPV-8Mw_HwSBeheVwaK9=5s+7+KbBj_NpwXQFgDGg@mail.gmail.com
This commit follows the idea of the 4767bc8ff2. If sub-query has only one
GROUP BY column, we can consider its output variable as being unique. We can
employ this fact in the statistics to make more precise estimations in the
upper query block.
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
This test uses an injection point to bypass the time overhead caused by
the idle_replication_slot_timeout GUC, which has a minimum value of one
minute.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Author: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
LIKE enables the creation of foreign tables based on the column
definitions, constraints and objects of the defined source relation(s).
This feature mirrors the behavior of CREATE TABLE LIKE, but ignores
the INCLUDING sub-options that do not make sense for foreign tables:
INDEXES, COMPRESSION, IDENTITY and STORAGE. The supported sub-options
are COMMENTS, CONSTRAINTS, DEFAULTS, GENERATED and STATISTICS, mapping
with the clauses already supported by the command.
Note that the restriction with LIKE in CREATE FOREIGN TABLE was added in
a0c6dfeecf.
Author: Zhang Mingli
Reviewed-by: Álvaro Herrera, Sami Imseih, Michael Paquier
Discussion: https://postgr.es/m/42d3f855-2275-4361-a42a-826172ca2dc4@Spark
This commit introduces idle_replication_slot_timeout GUC that allows
inactive slots to be invalidated at the time of checkpoint. Because
checkpoints happen checkpoint_timeout intervals, there can be some lag
between when the idle_replication_slot_timeout was exceeded and when the
slot invalidation is triggered at the next checkpoint. To avoid such lags,
users can force a checkpoint to promptly invalidate inactive slots.
Note that the idle timeout invalidation mechanism is not applicable for
slots that do not reserve WAL or for slots on the standby server that are
synced from the primary server (i.e., standby slots having 'synced' field
'true'). Synced slots are always considered to be inactive because they
don't perform logical decoding to produce changes.
The slots can become inactive for a long period if a subscriber is down
due to a system error or inaccessible because of network issues. If such a
situation persists, it might be more practical to recreate the subscriber
rather than attempt to recover the node and wait for it to catch up which
could be time-consuming.
Then, external tools could create replication slots (e.g., for migrations
or upgrades) that may fail to remove them if an error occurs, leaving
behind unused slots that take up space and resources. Manually cleaning
them up can be tedious and error-prone, and without intervention, these
lingering slots can cause unnecessary WAL retention and system bloat.
As the duration of idle_replication_slot_timeout is in minutes, any test
using that would be time-consuming. We are planning to commit a follow up
patch for tests by using the injection point framework.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
Discussion: https://postgr.es/m/OS0PR01MB5716C131A7D80DAE8CB9E88794FC2@OS0PR01MB5716.jpnprd01.prod.outlook.com
It's been some time since we did this, partly because the upstream
snowball project hasn't formally tagged a new release since 2021.
The main motivation for doing it now is to absorb a bug fix
(their commit e322673a841d9abd69994ae8cd20e191090b6ef4), which
prevents a null pointer dereference crash if SN_create_env() gets
a malloc failure at just the wrong point. We'll patch the back
branches with only that change, but we might as well do the full
sync dance on HEAD.
Aside from a bunch of mostly-minor tweaks to existing stemmers, this
update adds a new stemmer for Estonian. It also removes the existing
stemmer for Romanian using ISO-8859-2 encoding. Upstream apparently
concluded that ISO-8859-2 doesn't provide an adequate representation
of some Romanian characters, and the UTF-8 implementation should be
used instead.
While at it, update the README's instructions for doing a sync,
which have not been adjusted during the addition of meson tooling.
Thanks to Maksim Korotkov for discovering the null-pointer
bug and submitting the fix to upstream snowball.
Reported-by: Maksim Korotkov <m.korotkov@postgrespro.ru>
Discussion: https://postgr.es/m/1d1a46-67ab1000-21-80c451@83151435
When considering a local buffer, the GetBufferDescriptor() call in
BufferGetLSNAtomic() would be retrieving a shared buffer with a bad
buffer ID. Since the code checks whether the buffer is shared before
using the retrieved BufferDesc, this issue did not lead to any
malfunction. Nonetheless this seems like trouble waiting to happen,
so fix it by ensuring that GetBufferDescriptor() is only called when
we know the buffer is shared.
Author: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAHewXNku-o46-9cmUgyv6LkSZ25doDrWq32p=oz9kfD8ovVJMg@mail.gmail.com
Backpatch-through: 13
In try_partitionwise_join, we try to break down the join between two
partitioned relations into joins between matching partitions. To
achieve this, we iterate through each pair of partitions from the two
joining relations and create child join relations for them. To reduce
memory accumulation during each iteration, one step we take is freeing
the SpecialJoinInfos created for the child joins.
A child join's SpecialJoinInfo is a copy of the parent join's
SpecialJoinInfo, with some members being translated copies of their
counterparts in the parent. However, when freeing the bitmapset
members in a child join's SpecialJoinInfo, we failed to check whether
they were translated copies. As a result, we inadvertently freed the
members that were still in use by the parent SpecialJoinInfo, leading
to crashes when those freed members were accessed.
To fix, check if each member of the child join's SpecialJoinInfo is a
translated copy and free it only if that's the case. This requires
passing the parent join's SpecialJoinInfo as a parameter to
free_child_join_sjinfo.
Back-patch to v17 where this bug crept in.
Bug: #18806
Reported-by: 孟令彬 <m_lingbin@126.com>
Diagnosed-by: Tender Wang <tndrwang@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://postgr.es/m/18806-d70b0c9fdf63dcbf@postgresql.org
Backpatch-through: 17
This commit improves the description of a couple of GUCs, to be more
consistent with the style of their surroundings:
* array_nulls
* enable_self_join_elimination
* optimize_bounded_sort
* row_security
* synchronize_seqscans
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20250218.103240.1422205966404509831.horikyota.ntt@gmail.com
Move lazy_scan_heap()'s per_buffer_data variable into a tighter scope.
In lazy_scan_heap()'s phase I heap vacuuming, the read stream API
returns a pointer to the next block number to vacuum. As long as
read_stream_next_buffer() returns a valid buffer, per_buffer_data should
always be valid.
Move per_buffer_data into a tighter scope and make sure it is reset to
NULL on each iteration so that we get a core dump instead of bogus data
from a previous block if something goes wrong in the read stream API.
Suggested-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/626104.1739729538%40sss.pgh.pa.us
bd10ec529 added code to allow redundant functionally dependent GROUP BY
columns to be removed using unique indexes and NOT NULL constraints as
proofs of functional dependency. In that commit, I (David) added a test
to ensure that when there are multiple indexes available to remove columns
that we pick the index that allows us to remove the most columns. This
test was faulty as it assumed the t3 table's primary key index was valid
to use as functional dependency proof, but that's not the case since
that's defined as deferrable.
Here we adjust the tests added by that commit to use the t2 table instead.
That's defined with a non-deferrable primary key.
Author: songjinzhou <tsinghualucky912@foxmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/tencent_CD414C79D39668455DF80D35143B87634C08@qq.com
During the pg_createsubscriber execution, it is possible that the required
WAL is removed from the primary/publisher node due to
'max_slot_wal_keep_size'.
This patch raises a WARNING during the '--dry-run' mode if the
'max_slot_wal_keep_size' is set to a non-default value on the
primary/publisher node.
Author: Shubham Khanna <khannashubham1197@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Discussion: https://postgr.es/m/CAHv8Rj+deqsQXOMa7Tck8CBQUbsua=+4AuMVQ2=MPM0f-ZHbjA@mail.gmail.com
There is at least one report in the field of storing millions of
integers in arrays, so it seems like a good time to specialize
intarray's qsort function. In doing so, streamline the comparators:
Previously there were three, two for each direction for sorting
and one passed to qunique_arg. To preserve the early exit in the
case of descending input, pass the direction as an argument to
the comparator. This requires giving up duplicate detection, which
previously allowed skipping the qunique_arg() call. Testing showed
no regressions this way.
In passing, get rid of nearby checks that the input has at least
two elements, since preserving them would make some macros less
readable. These are not necessary for correctness, and seem like
premature optimizations.
Author: Andrey M. Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/098A3E67-E4A6-4086-9C66-B1EAEB1DFE1C@yandex-team.ru
Builds configured with Valgrind but without assertions would fail due to
a typo in the recent change. This should be included when back-patching
2a8a0067 into v17.
Peter Eisentraut