The original coding in contrib/uuid-ossp created and destroyed a uuid_t
object (or, in some cases, even two of them) each time it was called.
This is not the intended usage: you're supposed to keep the uuid_t object
around so that the library can cache its state across uses. (Other UUID
libraries seem to keep equivalent state behind-the-scenes in static
variables, but OSSP chose differently.) Aside from being quite inefficient,
creating a new uuid_t loses knowledge of the previously generated UUID,
which in theory could result in duplicate V1-style UUIDs being created
on sufficiently fast machines.
On at least some platforms, creating a new uuid_t also draws some entropy
from /dev/urandom, leaving less for the rest of the system. This seems
sufficiently unpleasant to justify back-patching this change.
This reverts commit 4c5fde4e28.
It turns out that the %name-prefix syntax without "=" does not work
at all in pre-2.4 Bison. We are not prepared to make such a large
jump in minimum required Bison version just to suppress a warning
message in a version hardly any developers are using yet.
When 3.0 gets more popular, we'll figure out a way to deal with this.
In the meantime, BISONFLAGS=-Wno-deprecated is recommendable for
anyone using 3.0 who doesn't want to see the warning.
%name-prefix doesn't use an "=" sign according to the Bison docs, but it
silently accepted one anyway, until Bison 3.0. This was originally a
typo of mine in commit 012abebab1, and we
seem to have slavishly copied the error into all the other grammar files.
Per report from Vik Fearing; analysis by Peter Eisentraut.
Back-patch to all active branches, since somebody might try to build
a back branch with up-to-date tools.
Move the code that sends the initial status information as well as the
calculation of paths inside the ENSURE_ERROR_CLEANUP block. If this code
failed, we would "leak" a counter of number of concurrent backups, thereby
making the system always believe it was in backup mode. This could happen
if the sending failed (which it probably never did given that the small
amount of data to send would never cause a flush). It is very low risk, but
all operations after do_pg_start_backup should be protected.
On Mingw, it seems that scanf() doesn't necessarily accept the same format
codes that printf() does, and in particular it may fail to recognize %llu
even though printf() does. Since configure only probes printf() behavior
while setting up the INT64_FORMAT macros, this means it's unsafe to use
those macros with scanf(). We had only one instance of such a coding
pattern, in contrib/pg_stat_statements, so change that code to avoid
the problem.
Per buildfarm warnings. Back-patch to 9.0 where the troublesome code
was introduced.
Michael Paquier
The macros and functions that work with backup blocks in the redo function
use 0-based numbering, so let's use that consistently in the function that
generates the records too. Makes it so much easier to compare the
generation and replay functions.
Backpatch to 9.0, where we switched from 1-based to 0-based numbering.
Commit dd428c79 added dbId and tsId to the xl_xact_commit struct but missed
that prepared transaction commits reuse that struct. Fix that.
Because those fields were left unitialized, replaying a commit prepared WAL
record in a hot standby node would fail to remove the relcache init file.
That can lead to "could not open file" errors on the standby. Relcache init
file only needs to be removed when a system table/index is rewritten in the
transaction using two phase commit, so that should be rare in practice. In
HEAD, the incorrect dbId/tsId values are also used for filtering in logical
replication code, causing the transaction to always be filtered out.
Analysis and fix by Andres Freund. Backpatch to 9.0 where hot standby was
introduced.
In yesterday's commit 2dc4f011fd, I tried
to force buffering of stdout/stderr in initdb to be what it is by
default when the program is run interactively on Unix (since that's how
most manual testing is done). This tripped over the fact that Windows
doesn't support _IOLBF mode. We dealt with that a long time ago in
syslogger.c by falling back to unbuffered mode on Windows. Export that
solution in port.h and use it in initdb.
Back-patch to 8.4, like the previous commit.
The proc array can contain duplicate XIDs, when a transaction is just being
prepared for two-phase commit. To cope, remove any duplicates in
txid_current_snapshot(). Also ignore duplicates in the input functions, so
that if e.g. you have an old pg_dump file that already contains duplicates,
it will be accepted.
Report and fix by Jan Wieck. Backpatch to all supported versions.
To lock a prepared transaction's shared memory entry, we used to mark it
with the XID of the backend. When the XID was no longer active according
to the proc array, the entry was implicitly considered as not locked
anymore. However, when preparing a transaction, the backend's proc array
entry was cleared before transfering the locks (and some other state) to
the prepared transaction's dummy PGPROC entry, so there was a window where
another backend could finish the transaction before it was in fact fully
prepared.
To fix, rewrite the locking mechanism of global transaction entries. Instead
of an XID, just have simple locked-or-not flag in each entry (we store the
locking backend's backend id rather than a simple boolean, but that's just
for debugging purposes). The backend is responsible for explicitly unlocking
the entry, and to make sure that that happens, install a callback to unlock
it on abort or process exit.
Backpatch to all supported versions.
Since this program may print to either stdout or stderr, the relative
ordering of its messages depends on the buffering behavior of those files.
Force stdout to be line-buffered and stderr to be unbuffered, ensuring
that the behavior will match standard Unix interactive behavior, even
when stdout and stderr are rerouted to a file.
Per complaint from Tomas Vondra. The particular case he pointed out is
new in HEAD, but issues of the same sort could arise in any branch with
other error messages, so back-patch to all branches.
I'm unsure whether we might not want to do this in other client programs
as well. For the moment, just fix initdb.
The code expands a varbit gist leaf key to a node key by copying the bit
data twice in a varlen datum, as both the lower and upper key. The lower key
was expanded to INTALIGN size, but the padding bytes were not initialized.
That's a problem because when the lower/upper keys are compared, the padding
bytes are used compared too, when the values are otherwise equal. That could
lead to incorrect query results.
REINDEX is advised for any btree_gist indexes on bit or bit varying data
type, to fix any garbage padding bytes on disk.
Per Valgrind, reported by Andres Freund. Backpatch to all supported
versions.
config.pl and buildenv.pl can be used to customize build settings when
using MSVC. They should never get committed into the common source tree.
Back-patch to 9.0; it looks like the rules were different in 8.4.
Michael Paquier
Usually the search would find plain "tclsh" without any trouble,
but some installations might only have the version-numbered flavor
of that program.
No compatibility problems have been reported with 8.6, so we might
as well back-patch this to all active branches.
Christoph Berg
Back in 8.3, we installed permissions checks in these functions (see
commits 8bc225e799 and cc26599b72). But we forgot to document that
anywhere in the user-facing docs; it did get mentioned in the 8.3 release
notes, but nobody's looking at that any more. Per gripe from Suya Huang.
Commit 4318daecc9 broke it. The change in
sub-second precision at extreme dates is normal. The inconsistent
truncation vs. rounding is essentially a bug, albeit a longstanding one.
Back-patch to 8.4, like the causative commit.
To-be-deleted list pages contain no useful information, as they are being
deleted, but we must still protect the writes from being torn by a crash
after a partial write. To do that, re-initialize the pages on WAL replay.
Jeff Janes caught this with a test program to test partial writes.
Backpatch to all supported versions.
If the server sends a long stream of data, and the server + network are
consistently fast enough to force the recv() loop in pqReadData() to
iterate until libpq's input buffer is full, then upon processing the last
incomplete message in each bufferload we'd usually double the buffer size,
due to supposing that we didn't have enough room in the buffer to finish
collecting that message. After filling the newly-enlarged buffer, the
cycle repeats, eventually resulting in an out-of-memory situation (which
would be reported misleadingly as "lost synchronization with server").
Of course, we should not enlarge the buffer unless we still need room
after discarding already-processed messages.
This bug dates back quite a long time: pqParseInput3 has had the behavior
since perhaps 2003, getCopyDataMessage at least since commit 70066eb1a1
in 2008. Probably the reason it's not been isolated before is that in
common environments the recv() loop would always be faster than the server
(if on the same machine) or faster than the network (if not); or at least
it wouldn't be slower consistently enough to let the buffer ramp up to a
problematic size. The reported cases involve Windows, which perhaps has
different timing behavior than other platforms.
Per bug #7914 from Shin-ichi Morita, though this is different from his
proposed solution. Back-patch to all supported branches.
ActiveSnapshot needs to be set when we call ExecutorRewind because some
plan node types may execute user-defined functions during their ReScan
calls (nodeLimit.c does so, at least). The wisdom of that is somewhat
debatable, perhaps, but for now the simplest fix is to make sure the
required context is valid. Failure to do this typically led to a
null-pointer-dereference core dump, though it's possible that in more
complex cases a function could be executed with the wrong snapshot
leading to very subtle misbehavior.
Per report from Leif Jensen. It's been broken for a long time, so
back-patch to all active branches.
Commit 4318daecc9 introduced a test that
couldn't be made consistent between integer and floating-point
timestamps.
It was designed to test the longest possible interval output length,
so removing four zeros from the number of hours, as this patch does,
is not ideal. But the test still has some utility for its original
purpose, and there aren't a lot of other good options.
Noah Misch suggested a different approach where we test that the
output either matches what we expect from integer timestamps or what
we expect from floating-point timestamps. That seemed to obscure an
otherwise simple test, however.
Reviewed by Tom Lane and Noah Misch.
This was not changed in HEAD, but will be done later as part of a
pgindent run. Future pgindent runs will also do this.
Report by Tom Lane
Backpatch through all supported branches, but not HEAD
When array of char * was used as target for a FETCH statement returning more
than one row, it tried to store all the result in the first element. Instead it
should dump array of char pointers with right offset, use the address instead
of the value of the C variable while reading the array and treat such variable
as char **, instead of char * for pointer arithmetic.
Patch by Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Commit fad153ec45 modified sinval.c to reduce
the number of calls into sinvaladt.c (which require taking a shared lock)
by keeping a local buffer of collected-but-not-yet-processed messages.
However, if processing of the last message in a batch resulted in a
recursive call to ReceiveSharedInvalidMessages, we could overwrite that
message with a new one while the outer invalidation function was still
working on it. This would be likely to lead to invalidation of the wrong
cache entry, allowing subsequent processing to use stale cache data.
The fix is just to make a local copy of each message while we're processing
it.
Spotted by Andres Freund. Back-patch to 8.4 where the bug was introduced.
This test used to just define an unused static inline function and check
whether that causes a warning. But newer clang versions warn about
unused static inline functions when defined inside a .c file, but not
when defined in an included header, which is the case we care about.
Change the test to cope.
Andres Freund
If we have an array of records stored on disk, the individual record fields
cannot contain out-of-line TOAST pointers: the tuptoaster.c mechanisms are
only prepared to deal with TOAST pointers appearing in top-level fields of
a stored row. The same applies for ranges over composite types, nested
composites, etc. However, the existing code only took care of expanding
sub-field TOAST pointers for the case of nested composites, not for other
structured types containing composites. For example, given a command such
as
UPDATE tab SET arraycol = ARRAY[(ROW(x,42)::mycompositetype] ...
where x is a direct reference to a field of an on-disk tuple, if that field
is long enough to be toasted out-of-line then the TOAST pointer would be
inserted as-is into the array column. If the source record for x is later
deleted, the array field value would become a dangling pointer, leading
to errors along the line of "missing chunk number 0 for toast value ..."
when the value is referenced. A reproducible test case for this was
provided by Jan Pecek, but it seems likely that some of the "missing chunk
number" reports we've heard in the past were caused by similar issues.
Code-wise, the problem is that PG_DETOAST_DATUM() is not adequate to
produce a self-contained Datum value if the Datum is of composite type.
Seen in this light, the problem is not just confined to arrays and ranges,
but could also affect some other places where detoasting is done in that
way, for example form_index_tuple().
I tried teaching the array code to apply toast_flatten_tuple_attribute()
along with PG_DETOAST_DATUM() when the array element type is composite,
but this was messy and imposed extra cache lookup costs whether or not any
TOAST pointers were present, indeed sometimes when the array element type
isn't even composite (since sometimes it takes a typcache lookup to find
that out). The idea of extending that approach to all the places that
currently use PG_DETOAST_DATUM() wasn't attractive at all.
This patch instead solves the problem by decreeing that composite Datum
values must not contain any out-of-line TOAST pointers in the first place;
that is, we expand out-of-line fields at the point of constructing a
composite Datum, not at the point where we're about to insert it into a
larger tuple. This rule is applied only to true composite Datums, not
to tuples that are being passed around the system as tuples, so it's not
as invasive as it might sound at first. With this approach, the amount
of code that has to be touched for a full solution is greatly reduced,
and added cache lookup costs are avoided except when there actually is
a TOAST pointer that needs to be inlined.
The main drawback of this approach is that we might sometimes dereference
a TOAST pointer that will never actually be used by the query, imposing a
rather large cost that wasn't there before. On the other side of the coin,
if the field value is used multiple times then we'll come out ahead by
avoiding repeat detoastings. Experimentation suggests that common SQL
coding patterns are unaffected either way, though. Applications that are
very negatively affected could be advised to modify their code to not fetch
columns they won't be using.
In future, we might consider reverting this solution in favor of detoasting
only at the point where data is about to be stored to disk, using some
method that can drill down into multiple levels of nested structured types.
That will require defining new APIs for structured types, though, so it
doesn't seem feasible as a back-patchable fix.
Note that this patch changes HeapTupleGetDatum() from a macro to a function
call; this means that any third-party code using that macro will not get
protection against creating TOAST-pointer-containing Datums until it's
recompiled. The same applies to any uses of PG_RETURN_HEAPTUPLEHEADER().
It seems likely that this is not a big problem in practice: most of the
tuple-returning functions in core and contrib produce outputs that could
not possibly be toasted anyway, and the same probably holds for third-party
extensions.
This bug has existed since TOAST was invented, so back-patch to all
supported branches.
Since ruleutils.c recurses, it could be driven to stack overflow by
deeply nested constructs. Very large queries might also take long
enough to deparse that a check for interrupts seems like a good idea.
Stick appropriate tests into a couple of key places.
Noted by Greg Stark. Back-patch to all supported branches.
Some popen() calls were missing SYSTEMQUOTEs, which caused initdb and
pg_upgrade to fail on Windows, if the installation path contained both
spaces and @ signs.
Patch by Nikhil Deshpande. Backpatch to all supported versions.
In writeListPage, never take a full-page image of the page, because we
have all the information required to re-initialize in the WAL record
anyway. Before this fix, a full-page image was always generated, unless
full_page_writes=off, because when the page is initialized its LSN is
always 0. In stable-branches, keep the code to restore the backup blocks
if they exist, in case that the WAL is generated with an older minor
version, but in master Assert that there are no full-page images.
In the redo routine, add missing "off++". Otherwise the tuples are added
to the page in reverse order. That happens to be harmless because we
always scan and remove all the tuples together, but it was clearly wrong.
Also, it was masked by the first bug unless full_page_writes=off, because
the page was always restored from a full-page image.
Backpatch to all supported versions.
Once we've completed a PREPARE, our session is not running a transaction,
so its entry in pg_stat_activity should show xact_start as null, rather
than leaving the value as the start time of the now-prepared transaction.
I think possibly this oversight was triggered by faulty extrapolation
from the adjacent comment that says PrepareTransaction should not call
AtEOXact_PgStat, so tweak the wording of that comment.
Noted by Andres Freund while considering bug #10123 from Maxim Boguk,
although this error doesn't seem to explain that report.
Back-patch to all active branches.
pg_sequence_parameters() and pg_identify_object() have had incorrect
proallargtypes entries since 9.1 and 9.3 respectively. This was mostly
masked by the correct information in proargtypes, but a few operations
such as pg_get_function_arguments() (and thus psql's \df display) would
show the wrong data types for these functions' input parameters.
In HEAD, fix the wrong info, bump catversion, and add an opr_sanity
regression test to catch future mistakes of this sort.
In the back branches, just fix the wrong info so that installations
initdb'd with future minor releases will have the right data. We
can't force an initdb, and it doesn't seem like a good idea to add
a regression test that will fail on existing installations.
Andres Freund
Introduced in 585bca39: msgid is not used in the Windows code path.
Also adjust comments a tad (mostly to keep pgindent from messing it up).
David Rowley
Specifically, on-stack memset() might be removed, so:
* Replace memset() with px_memset()
* Add px_memset to copy_crlf()
* Add px_memset to pgp-s2k.c
Patch by Marko Kreen
Report by PVS-Studio
Backpatch through 8.4.
This has probably been broken for quite a long time. Buildfarm member
currawong's current results suggest that it's been broken since 9.1, so
backpatch this to that branch.
This only supports Python 2 - I will handle Python 3 separately, but
this is a fairly simple fix.
According to the Single Unix Spec and assorted man pages, you're supposed
to use the constants named AF_xxx when setting ai_family for a getaddrinfo
call. In a few places we were using PF_xxx instead. Use of PF_xxx
appears to be an ancient BSD convention that was not adopted by later
standardization. On BSD and most later Unixen, it doesn't matter much
because those constants have equivalent values anyway; but nonetheless
this code is not per spec.
In the same vein, replace PF_INET by AF_INET in one socket() call, which
wasn't even consistent with the other socket() call in the same function
let alone the remainder of our code.
Per investigation of a Cygwin trouble report from Marco Atzeri. It's
probably a long shot that this will fix his issue, but it's wrong in
any case.
Bind attempts to an LDAP server should time out after two seconds,
allowing additional lines in the service control file to be parsed
(which provide a fall back to a secondary LDAP server or default options).
The existing code failed to enforce that timeout during TCP connect,
resulting in a hang far longer than two seconds if the LDAP server
does not respond.
Laurenz Albe
Previously, in some places, socket creation errors were checked for
negative values, which is not true for Windows because sockets are
unsigned. This masked socket creation errors on Windows.
Backpatch through 9.0. 8.4 doesn't have the infrastructure to fix this.
I mixed up BLCKSZ and XLOG_BLCKSZ when I changed the way the buffer is
allocated a couple of weeks ago. With the default settings, they are both
8k, but they can be changed at compile-time.
Don't reset the rightlink of a page when replaying a page update record.
This was a leftover from pre-hot standby days, when it was not possible to
have scans concurrent with WAL replay. Resetting the right-link was not
necessary back then either, but it was done for the sake of tidiness. But
with hot standby, it's wrong, because a concurrent scan might still need it.
Backpatch all versions with hot standby, 9.0 and above.
Formerly, we set up the postmaster's signal handling only when we were
about to start launching subprocesses. This is a bad idea though, as
it means that for example a SIGINT arriving before that will kill the
postmaster instantly, perhaps leaving lockfiles, socket files, shared
memory, etc laying about. We'd rather that such a signal caused orderly
postmaster termination including releasing of those resources. A simple
fix is to move the PostmasterMain stanza that initializes signal handling
to an earlier point, before we've created any such resources. Then, an
early-arriving signal will be blocked until we're ready to deal with it
in the usual way. (The only part that really needs to be moved up is
blocking of signals, but it seems best to keep the signal handler
installation calls together with that; for one thing this ensures the
kernel won't drop any signals we wished to get. The handlers won't get
invoked in any case until we unblock signals in ServerLoop.)
Per a report from MauMau. He proposed changing the way "pg_ctl stop"
works to deal with this, but that'd just be masking one symptom not
fixing the core issue.
It's been like this since forever, so back-patch to all supported branches.
EXEC_BACKEND builds (i.e., Windows) failed to absorb values of PGC_BACKEND
parameters if they'd been changed post-startup via the config file. This
for example prevented log_connections from working if it were turned on
post-startup. The mechanism for handling this case has always been a bit
of a kluge, and it wasn't revisited when we implemented EXEC_BACKEND.
While in a normal forking environment new backends will inherit the
postmaster's value of such settings, EXEC_BACKEND backends have to read
the settings from the CONFIG_EXEC_PARAMS file, and they were mistakenly
rejecting them. So this case has always been broken in the Windows port;
so back-patch to all supported branches.
Amit Kapila
The code segment that removes the old symlink (if present) wasn't clued
into the fact that on Windows, symlinks are junction points which have
to be removed with rmdir().
Backpatch to 9.0, where the failing code was introduced.
MauMau, reviewed by Muhammad Asif Naeem and Amit Kapila
The advice to join to pg_prepared_xacts via the transaction column was not
updated when the transaction column was replaced by virtualtransaction.
Since it's not quite obvious how to do that join, give an explicit example.
For consistency also give an example for the adjacent case of joining to
pg_stat_activity. And link-ify the view references too, just because we
can. Per bug #9840 from Alexey Bashtanov.
Michael Paquier and Tom Lane
It's been 16 bytes, not 12, for ages. This was fixed in passing in HEAD
(commit 146604ec), but as a factual error it should have been back-patched.
Per gripe from Tatsuhito Kasahara.
Memory allocation can fail if you run out of memory, and inside a critical
section that will lead to a PANIC. Use conservatively-sized arrays in stack
instead.
There was previously no explicit limit on the number of pages a GiST split
can produce, it was only limited by the number of LWLocks that can be held
simultaneously (100 at the moment). This patch adds an explicit limit of 75
pages. That should be plenty, a typical split shouldn't produce more than
2-3 page halves.
The bug has been there forever, but only backpatch down to 9.1. The code
was changed significantly in 9.1, and it doesn't seem worth the risk or
trouble to adapt this for 9.0 and 8.4.
The code for matching clients to pg_hba.conf lines that specify host names
(instead of IP address ranges) failed to complain if reverse DNS lookup
failed; instead it silently didn't match, so that you might end up getting
a surprising "no pg_hba.conf entry for ..." error, as seen in bug #9518
from Mike Blackwell. Since we don't want to make this a fatal error in
situations where pg_hba.conf contains a mixture of host names and IP
addresses (clients matching one of the numeric entries should not have to
have rDNS data), remember the lookup failure and mention it as DETAIL if
we get to "no pg_hba.conf entry". Apply the same approach to forward-DNS
lookup failures, too, rather than treating them as immediate hard errors.
Along the way, fix a couple of bugs that prevented us from detecting an
rDNS lookup error reliably, and make sure that we make only one rDNS lookup
attempt; formerly, if the lookup attempt failed, the code would try again
for each host name entry in pg_hba.conf. Since more or less the whole
point of this design is to ensure there's only one lookup attempt not one
per entry, the latter point represents a performance bug that seems
sufficient justification for back-patching.
Also, adjust src/port/getaddrinfo.c so that it plays as well as it can
with this code. Which is not all that well, since it does not have actual
support for rDNS lookup, but at least it should return the expected (and
required by spec) error codes so that the main code correctly perceives the
lack of functionality as a lookup failure. It's unlikely that PG is still
being used in production on any machines that require our getaddrinfo.c,
so I'm not excited about working harder than this.
To keep the code in the various branches similar, this includes
back-patching commits c424d0d105 and
1997f34db4 into 9.2 and earlier.
Back-patch to 9.1 where the facility for hostnames in pg_hba.conf was
introduced.
Tom Lane