This patch renames the sync_error_count column to sync_table_error_count
in the pg_stat_subscription_stats view. The new name makes the purpose
explicit now that a separate column exists to track sequence
synchronization errors.
Additionally, the column seq_sync_error_count is renamed to
sync_seq_error_count to maintain a consistent naming pattern, making it
easier for users to group, and query synchronization related counters.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CALDaNm3WwJmz=-4ybTkhniB-Nf3qmFG9Zx1uKjyLLoPF5NYYXA@mail.gmail.com
If you go back as far as the RHEL7 era, <sys/auxv.h> does not provide
the HWCAPxxx macros needed with elf_aux_info or getauxval, so you need
to get those from the kernel header <asm/hwcap.h> instead. We knew
that for the 32-bit case but failed to extrapolate to the 64-bit case.
Oversight in commit aac831caf.
Reported-by: GaoZengqi <pgf00a@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFmBtr3Av62-jBzdhFkDHXJF9vQmNtSnH2upwODjnRcsgdTytw@mail.gmail.com
Backpatch-through: 18
Remove bogus stripping of RelabelTypes: that can result in building
an output SAOP tree with incorrect exposed exprType for the operands,
which might confuse polymorphic operators. Moreover it demonstrably
prevents folding some OR-trees to SAOPs when the RHS expressions
have different base types that were coerced to the same type by
RelabelTypes.
Reduce prohibition on type_is_rowtype to just disallow type RECORD.
We need that because otherwise we would happily fold multiple RECORD
Consts into a RECORDARRAY Const even if they aren't the same record
type. (We could allow that perhaps, if we checked that they all have
the same typmod, but the case doesn't seem worth that much effort.)
However, there is no reason at all to disallow the transformation
for named composite types, nor domains over them: as long as we can
find a suitable array type we're good.
Remove some assertions that seem rather out of place (it's not
this code's duty to verify that the RestrictInfo structure is
sane). Rewrite some comments.
The issues with RelabelType stripping seem severe enough to
back-patch this into v18 where the code was introduced.
Author: Tender Wang <tndrwang@gmail.com>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAHewXN=aH7GQBk4fXU-WaEeVmQWUmBAeNyBfJ3VKzPphyPKUkQ@mail.gmail.com
Backpatch-through: 18
The documentation did not previously mention the default values for
the --fsync-interval and --plugin options, even though pg_recvlogical --help
shows them. This omission made it harder for users to understand
the tool's behavior from the documentation alone.
This commit adds the missing default value descriptions for both options
to the pg_recvlogical documentation.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/CAHGQGwFqssPBjkWMFofGq32e_tANOeWN-cM=6biAP3nnFUXMRw@mail.gmail.com
PostgreSQL 18 deprecated password_encryption='md5', but the
comments for this GUC in the sample configuration file did
not mention the deprecation. Update comments with a notice
to make as many users as possible aware of it. Also add a
comment to the related md5_password_warnings GUC while there.
Author: Michael Banck <mbanck@gmx.net>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Backpatch-through: 18
The existing format of pg_dependencies uses a single-object JSON
structure, with each key value embedding all the knowledge about the
set attributes tracked, like:
{"1 => 5": 1.000000, "5 => 1": 0.423130}
While this is a very compact format, it is confusing to read and it is
difficult to manipulate the values within the object, particularly when
tracking multiple attributes.
The new output format introduced in this commit is a JSON array of
objects, with:
- A key named "degree", with a float value.
- A key named "attributes", with an array of attribute numbers.
- A key named "dependency", with an attribute number.
The values use the same underlying type as previously when printed, with
a new output format that shows now as follows:
[{"degree": 1.000000, "attributes": [1], "dependency": 5},
{"degree": 0.423130, "attributes": [5], "dependency": 1}]
This new format will become handy for a follow-up set of changes, so as
it becomes possible to inject extended statistics rather than require an
ANALYZE, like in a dump/restore sequence or after pg_upgrade on a new
cluster.
This format has been suggested by Tomas Vondra. The key names are
defined in the header introduced by 1f927cce44, to ease the
integration of frontend-specific changes that are still under
discussion. (Again a personal note: if anybody comes up with better
name for the keys, of course feel free.)
The bulk of the changes come from the regression tests, where
jsonb_pretty() is now used to make the outputs generated easier to
parse.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
The existing format of pg_ndistinct uses a single-object JSON structure
where each key is itself a comma-separated list of attnums, like:
{"3, 4": 11, "3, 6": 11, "4, 6": 11, "3, 4, 6": 11}
While this is a very compact format, it is confusing to read and it is
difficult to manipulate the values within the object.
The new output format introduced in this commit is an array of objects,
with:
- A key named "attributes", that contains an array of attribute numbers.
- A key named "ndistinct", represented as an integer.
The values use the same underlying type as previously when printed, with
a new output format that shows now as follows:
[{"ndistinct": 11, "attributes": [3,4]},
{"ndistinct": 11, "attributes": [3,6]},
{"ndistinct": 11, "attributes": [4,6]},
{"ndistinct": 11, "attributes": [3,4,6]}]
This new format will become handy for a follow-up set of changes, so as
it becomes possible to inject extended statistics rather than require an
ANALYZE, like in a dump/restore sequence or after pg_upgrade on a new
cluster.
This format has been suggested by Tomas Vondra. The key names are
defined in a new header, to ease with the integration of
frontend-specific changes that are still under discussion. (Personal
note: I am not specifically wedded to these key names, but if there are
better name suggestions for this release, feel free.)
The bulk of the changes come from the regression tests, where
jsonb_pretty() is now used to make the outputs generated easier to
parse.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
Until d2ea2d310d, the PS_USE_PS_STRINGS
option was used on the GNU/Hurd. As this option got removed and
PS_USE_CLOBBER_ARGV appears to work fine nowadays on the Hurd, define
this one to re-enable process title changes on this platform.
In the 14 and 15 branches, the existing test for __hurd__ (added 25
years ago by commit 209aa77d, removed in 16 by the above commit) is left
unchanged for now as it was activating slightly different code paths and
would need investigation by a Hurd user.
Author: Michael Banck <mbanck@debian.org>
Discussion: https://postgr.es/m/CA%2BhUKGJMNGUAqf27WbckYFrM-Mavy0RKJvocfJU%3DJ2XcAZyv%2Bw%40mail.gmail.com
Backpatch-through: 16
Likewise for MemSetAligned.
"long" wasn't the most suitable type for these macros as with MSVC in
64-bit builds, sizeof(long) == 4, which is narrower than the processor's
word size, therefore these macros had to perform twice as many loops as
they otherwise might.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CAApHDvoGFjSA3aNyVQ3ivbyc4ST=CC5L-_VjEUQ92HbE2Cxovg@mail.gmail.com
"long" is 32 bits on Windows 64-bit. Switch to a datatype that's 64-bit
on all platforms. While we're there, use an unsigned type as these
fields count things that have occurred, of which it's not possible to
have negative numbers of.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CAApHDvoGFjSA3aNyVQ3ivbyc4ST=CC5L-_VjEUQ92HbE2Cxovg@mail.gmail.com
This new test, added in 009_log_temp_files, checks that the temporary
files created by a WITH HOLD cursor are dropped at the end of the
transaction where the transaction has been created.
The portal's executor is shutdown in PersistHoldablePortal(), after for
example some forced detoast, so as the cursor data can be accessed
without requiring a snapshot.
Author: Mircea Cadariu <cadariu.mircea@gmail.com>
Discussion: https://postgr.es/m/0a666d28-9080-4239-90d6-f6345bb43468@gmail.com
When instrumenting a MERGE command containing both WHEN NOT MATCHED BY
SOURCE and WHEN NOT MATCHED BY TARGET actions using EXPLAIN ANALYZE, a
concurrent update of the target relation could lead to an Assert
failure in show_modifytable_info(). In a non-assert build, this would
lead to an incorrect value for "skipped" tuples in the EXPLAIN output,
rather than a crash.
This could happen if the concurrent update caused a matched row to no
longer match, in which case ExecMerge() treats the single originally
matched row as a pair of not matched rows, and potentially executes 2
not-matched actions for the single source row. This could then lead to
a state where the number of rows processed by the ModifyTable node
exceeds the number of rows produced by its source node, causing
"skipped_path" in show_modifytable_info() to be negative, triggering
the Assert.
Fix this in ExecMergeMatched() by incrementing the instrumentation
tuple count on the source node whenever a concurrent update of this
kind is detected, if both kinds of merge actions exist, so that the
number of source rows matches the number of actions potentially
executed, and the "skipped" tuple count is correct.
Back-patch to v17, where support for WHEN NOT MATCHED BY SOURCE
actions was introduced.
Bug: #19111
Reported-by: Dilip Kumar <dilipbalaut@gmail.com>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/19111-5b06624513d301b3@postgresql.org
Backpatch-through: 17
WaitLSNWakeup() incorrectly returned early when called with
InvalidXLogRecPtr (meaning "wake all waiters"), because the fast-path
check compared minWaitedLSN > 0 without validating currentLSN first.
This caused WAIT FOR LSN commands to wait indefinitely during standby
promotion until random signals woke them.
Add an XLogRecPtrIsValid() check before the comparison so that
InvalidXLogRecPtr bypasses the fast-path and wakes all waiters immediately.
Discussion: https://postgr.es/m/CABPTF7UieOYbOgH3EnQCasaqcT1T4N6V2wammwrWCohQTnD_Lw%40mail.gmail.com
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
All GUCs in postgresql.conf.sample should be set to the default
value and be commented out. This syntax was however not tested
for, making omissions easy to miss. Add a test which check all
lines for syntax.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/19727040-3EE4-4719-AF4F-2548544113D7@yesql.se
All settings in this file should be commented out. In addition to
fixing that, also fix the indentation for this line.
Oversight in commit c758119e5b.
Reported-by: Daniel Gustafsson <daniel@yesql.se>
Author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/19727040-3EE4-4719-AF4F-2548544113D7%40yesql.se
Backpatch-through: 18
Commit 5e4fcbe531 added a check_rights parameter to this function
for use by ALTER TABLE commands that re-create statistics objects.
However, we intentionally ignore check_rights when verifying
relation ownership because this function's lookup could return a
different answer than the caller's. This commit adds a note to
this effect so that we remember it down the road.
Reviewed-by: Noah Misch <noah@leadboat.com>
Backpatch-through: 14
Path expansion might expose characters like spaces which would cause
command failure, so double-quote the examples. While %f doesn't need
quoting since it uses a fixed character set, it is best to be
consistent.
Discussion: https://postgr.es/m/aROPCQCfvKp9Htk4@momjian.us
Backpatch-through: master
Previously, when pgbench ran a custom script that triggered retriable errors
(e.g., deadlocks) followed by multiple \syncpipeline commands in pipeline mode,
the following assertion failure could occur:
Assertion failed: (res == ((void*)0)), function discardUntilSync, file pgbench.c, line 3594.
The issue was that discardUntilSync() assumed a pipeline sync result
(PGRES_PIPELINE_SYNC) would always be followed by either another sync result
or NULL. This assumption was incorrect: when multiple sync requests were sent,
a sync result could instead be followed by another result type. In such cases,
discardUntilSync() mishandled the results, leading to the assertion failure.
This commit fixes the issue by making discardUntilSync() correctly handle cases
where a pipeline sync result is followed by other result types. It now continues
discarding results until another pipeline sync followed by NULL is reached.
Backpatched to v17, where support for \syncpipeline command in pgbench was
introduced.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/20251111105037.f3fc554616bc19891f926c5b@sraoss.co.jp
Backpatch-through: 17
This reverts commit 1fd981f053, based on concerns that the logging
improvements do not justify the protocol breakage of dropping an unnamed
portal once its execution has completed.
It seems unlikely that one would try to send an execute or describe
message after the portal has been used, but if they do such
post-completion messages would not be able to process as the previous
versions. Let's revert this change for now so as we keep compatibility
and consider a different solution.
The tests added by 76bba03312 track the pre-1fd981f05369 behavior, and
are still valid.
Discussion: https://postgr.es/m/CA+TgmoYFJyJNQw3RT7veO3M2BWRE9Aw4hprC5rOcawHZti-f8g@mail.gmail.com
Much of the "Replication Slot" chapter applies to physical and logical
slots, but it was sloppy in mentioning mostly physical slots. This
patch clarified which parts of the text apply to which slot types.
This chapter is referenced from the logical slot/subscriber chapter, so
it needs to do double duty.
Backpatch-through: master
Also mention that logical replication slots are created by default when
subscriptions are created. This should clarify the text.
Backpatch-through: master
Previously it was not clear that "physical" replication slots were being
discussed, and that they needed to be created on the primary and not the
standby.
Backpatch-through: master
While the underlying getaddrinfo call accepts a null pointer for
the hintp parameter, pg_getaddrinfo_all does not. Document this
difference with a comment to make it clear.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Sergey Tatarintsev <s.tatarintsev@postgrespro.ru>
Discussion: https://postgr.es/m/1e5efc94-407e-40b8-8b10-4d25f823c6d7@postgrespro.ru
On the CREATE POLICY page, the "Policies Applied by Command Type"
table was missing MERGE ... THEN DELETE and some of the policies
applied during INSERT ... ON CONFLICT and MERGE. Fix that, and try to
improve readability by listing the various MERGE cases separately,
rather than together with INSERT/UPDATE/DELETE. Mention COPY ... TO
along with SELECT, since it behaves in the same way. In addition,
document which policy violations cause errors to be thrown, and which
just cause rows to be silently ignored.
Also, a paragraph above the table states that INSERT ... ON CONFLICT
DO UPDATE only checks the WITH CHECK expressions of INSERT policies
for rows appended to the relation by the INSERT path, which is
incorrect -- all rows proposed for insertion are checked, regardless
of whether they end up being inserted. Fix that, and also mention that
the same applies to INSERT ... ON CONFLICT DO NOTHING.
In addition, in various other places on that page, clarify how the
different types of policy are applied to different commands, and
whether or not errors are thrown when policy checks do not pass.
Backpatch to all supported versions. Prior to v17, MERGE did not
support RETURNING, and so MERGE ... THEN INSERT would never check new
rows against SELECT policies. Prior to v15, MERGE was not supported at
all.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Viktor Holmberg <v@viktorh.net>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CAEZATCWqnfeChjK=n1V_dYZT4rt4mnq+ybf9c0qXDYTVMsy8pg@mail.gmail.com
Backpatch-through: 14
Issue introduced by 84fb27511d. I have missed this diff while
adding pgoff_t to the typedef list of pgindent, while addressing a
separate indentation issue.
Per buildfarm member koel.
PostgreSQL's Windows port has never been able to handle files larger
than 2GB due to the use of off_t for file offsets, only 32-bit on
Windows. This causes signed integer overflow at exactly 2^31 bytes when
trying to handle files larger than 2GB, for the routines touched by this
commit.
Note that large files are forbidden by ./configure (3c6248a828) and
meson (recent change, see 79cd66f28c). This restriction also exists
in v16 and older versions for the now-dead MSVC scripts.
The code base already defines pgoff_t as __int64 (64-bit) on Windows for
this purpose, and some function declarations in headers use it, but many
internals still rely on off_t. This commit switches more routines to
use pgoff_t, offering more portability, for areas mainly related to file
extensions and storage.
These are not critical for WAL segments yet, which have currently a
maximum size allowed of 1GB (well, this opens the door at allowing a
larger size for them). This matters more for segment files if we want
to lift the large file restriction in ./configure and meson in the
future, which would make sense to remove once/if all traces of off_t are
gone from the tree. This can additionally matter for out-of-core code
that may want files larger than 2GB in places where off_t is four bytes
in size.
Note that off_t is still used in other parts of the tree like
buffile.c, WAL sender/receiver, base backup, pg_combinebackup, etc.
These other code paths can be addressed separately, and their update
will be required if we want to remove the large file restriction in the
future. This commit is a good first cut in itself towards more
portability, hopefully.
On Unix-like systems, pgoff_t is defined as off_t, so this change only
affects Windows behavior.
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/0f238ff4-c442-42f5-adb8-01b762c94ca1@gmail.com
pg_logical_slot_get_changes_guts() previously assigned InvalidXLogRecPtr to
the local variable upto_nchanges, which is of type int32, not XLogRecPtr.
While this caused no functional issue since InvalidXLogRecPtr is defined as 0,
it was semantically incorrect.
This commit fixes the issue by updating pg_logical_slot_get_changes_guts()
to set upto_nchanges to 0 instead of InvalidXLogRecPtr.
No backpatch is needed, as the previous behavior was harmless.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Steven Niu <niushiji@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwHKHuR5NGnGxU3+ebz7cbC1ZAR=AgG4Bueq==Lj6iX8Sw@mail.gmail.com
This comment seems to refer to some stuff that was removed during
development in 2005.
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/aRJFDxKJLFE_1Iai%40nathan
Since this is a test module, leaking a couple of LWLock tranches is
fine, but we want to discourage that pattern in third-party code.
This commit teaches the module to create only one tranche and to
store its ID in shared memory for use by other backends.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/dd36d384-55df-4fc2-825c-5bc56c950fa9%40gmail.com
If DSM entry initialization fails, backends could try to use an
uninitialized DSM segment, DSA, or dshash table (since the entry is
still added to the registry). To fix, keep track of whether
initialization completed, and ERROR if a backend tries to attach to
an uninitialized entry. We could instead retry initialization as
needed, but that seemed complicated, error prone, and unlikely to
help most cases. Furthermore, such problems probably indicate a
coding error.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/dd36d384-55df-4fc2-825c-5bc56c950fa9%40gmail.com
Backpatch-through: 17
Before we started to freeze async notify entries (commit 8eeb4a0f7c),
no one looked at the 'xid' on an entry with invalid 'dboid'. But now
we might actually need to freeze it later. Initialize them with
InvalidTransactionId to begin with, to avoid that work later.
Álvaro pointed this out in review of commit 8eeb4a0f7c, but I forgot
to include this change there.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://www.postgresql.org/message-id/202511071410.52ll56eyixx7@alvherre.pgsql
Backpatch-through: 14
Previous commit fixed a bug where VACUUM would truncate the CLOG
that's still needed to check the commit status of XIDs in the async
notify queue, but as mentioned in the commit message, it wasn't a full
fix. If a backend is executing asyncQueueReadAllNotifications() and
has just made a local copy of an async SLRU page which contains old
XIDs, vacuum can concurrently truncate the CLOG covering those XIDs,
and the backend still gets an error when it calls
TransactionIdDidCommit() on those XIDs in the local copy. This commit
fixes that race condition.
To fix, hold the SLRU bank lock across the TransactionIdDidCommit()
calls in NOTIFY processing.
Per Tom Lane's idea. Backpatch to all supported versions.
Reviewed-by: Joel Jacobson <joel@compiler.org>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Discussion: https://www.postgresql.org/message-id/2759499.1761756503@sss.pgh.pa.us
Backpatch-through: 14
The async notification queue contains the XID of the sender, and when
processing notifications we call TransactionIdDidCommit() on the
XID. But we had no safeguards to prevent the CLOG segments containing
those XIDs from being truncated away. As a result, if a backend didn't
for some reason process its notifications for a long time, or when a
new backend issued LISTEN, you could get an error like:
test=# listen c21;
ERROR: 58P01: could not access status of transaction 14279685
DETAIL: Could not open file "pg_xact/000D": No such file or directory.
LOCATION: SlruReportIOError, slru.c:1087
To fix, make VACUUM "freeze" the XIDs in the async notification queue
before truncating the CLOG. Old XIDs are replaced with
FrozenTransactionId or InvalidTransactionId.
Note: This commit is not a full fix. A race condition remains, where a
backend is executing asyncQueueReadAllNotifications() and has just
made a local copy of an async SLRU page which contains old XIDs, while
vacuum concurrently truncates the CLOG covering those XIDs. When the
backend then calls TransactionIdDidCommit() on those XIDs from the
local copy, you still get the error. The next commit will fix that
remaining race condition.
This was first reported by Sergey Zhuravlev in 2021, with many other
people hitting the same issue later. Thanks to:
- Alexandra Wang, Daniil Davydov, Andrei Varashen and Jacques Combrink
for investigating and providing reproducable test cases,
- Matheus Alcantara and Arseniy Mukhin for review and earlier proposed
patches to fix this,
- Álvaro Herrera and Masahiko Sawada for reviews,
- Yura Sokolov aka funny-falcon for the idea of marking transactions
as committed in the notification queue, and
- Joel Jacobson for the final patch version. I hope I didn't forget
anyone.
Backpatch to all supported versions. I believe the bug goes back all
the way to commit d1e027221d, which introduced the SLRU-based async
notification queue.
Discussion: https://www.postgresql.org/message-id/16961-25f29f95b3604a8a@postgresql.org
Discussion: https://www.postgresql.org/message-id/18804-bccbbde5e77a68c2@postgresql.org
Discussion: https://www.postgresql.org/message-id/CAK98qZ3wZLE-RZJN_Y%2BTFjiTRPPFPBwNBpBi5K5CU8hUHkzDpw@mail.gmail.com
Backpatch-through: 14
Previously, if async notify processing encountered an error, we would
report the error to the client and advance our read position past the
offending entry to prevent trying to process it over and over
again. Trying to continue after an error has a few problems however:
- We have no way of telling the client that a notification was
lost. They get an ERROR, but that doesn't tell you much. As such,
it's not clear if keeping the connection alive after losing a
notification is a good thing. Depending on the application logic,
missing a notification could cause the application to get stuck
waiting, for example.
- If the connection is idle, PqCommReadingMsg is set and any ERROR is
turned into FATAL anyway.
- We bailed out of the notification processing loop on first error
without processing any subsequent notifications. The subsequent
notifications would not be processed until another notify interrupt
arrives. For example, if there were two notifications pending, and
processing the first one caused an ERROR, the second notification
would not be processed until someone sent a new NOTIFY.
This commit changes the behavior so that any ERROR while processing
async notifications is turned into FATAL, causing the client
connection to be terminated. That makes the behavior more consistent
as that's what happened in idle state already, and terminating the
connection is a clear signal to the application that it might've
missed some notifications.
The reason to do this now is that the next commits will change the
notification processing code in a way that would make it harder to
skip over just the offending notification entry on error.
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Discussion: https://www.postgresql.org/message-id/fedbd908-4571-4bbe-b48e-63bfdcc38f64@iki.fi
Backpatch-through: 14
Explicitly document that privileges are transferred along with the
ownership. Backpatch to all supported versions since this behavior
has always been present.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Josef Šimánek <josef.simanek@gmail.com>
Reported-by: Gilles Parc <gparc@free.fr>
Discussion: https://postgr.es/m/2023185982.281851219.1646733038464.JavaMail.root@zimbra15-e2.priv.proxad.net
Backpatch-through: 14
This creates a src/backend/catalog/pg_tablespace.c supporting file
containing a new function get_tablespace_location(), which lets the code
underlying pg_tablespace_location() be reused for other purposes.
Author: Manni Wood <manni.wood@enterprisedb.com>
Author: Nishant Sharma <nishant.sharma@enterprisedb.com>
Reviewed-by: Vaibhav Dalvi <vaibhav.dalvi@enterprisedb.com>
Reviewed-by: Ian Lawrence Barwick <barwick@gmail.com>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CAKWEB6rmnmGKUA87Zmq-s=b3Scsnj02C0kObQjnbL2ajfPWGEw@mail.gmail.com
The range for commit_siblings was incorrectly listed as starting on 1
instead of 0 in the sample configuration file. Backpatch down to all
supported branches.
Author: Man Zeng <zengman@halodbtech.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/tencent_53B70BA72303AE9C6889E78E@qq.com
Backpatch-through: 14
Amit Kapila