pg_dump and load to 2.0. I haven't gotten any feedback on whether
people want it, so I am submitting it for others to decide. I would
recommend an install in 1.02.1.
I had said that the 2.0 pg_dump could dump a 1.02.1 database, but I was
wrong. The copy is actually performed by the backend, and the 2.0
database will not be able to read 1.02.1 databases because of the new
system columns.
This patch does several things. It copies nulls out as \N, so they can
be distinguished from '' strings. It fixes a problem where backslashes
in the input stream were not output as double-backslashes. Without this
patch, backslashes copied out were deleted upon input, or interpreted as
special characters. Third, input is now terminated by backslash-period.
This can not be part of a normal input stream.
I tested this by creating a database with all sorts of nulls, backslash,
and period fields and dumped the database and reloaded into a new
database and compared them.
Submitted by: Bruce
pg_dump and load to 2.0. I haven't gotten any feedback on whether
people want it, so I am submitting it for others to decide. I would
recommend an install in 1.02.1.
I had said that the 2.0 pg_dump could dump a 1.02.1 database, but I was
wrong. The copy is actually performed by the backend, and the 2.0
database will not be able to read 1.02.1 databases because of the new
system columns.
This patch does several things. It copies nulls out as \N, so they can
be distinguished from '' strings. It fixes a problem where backslashes
in the input stream were not output as double-backslashes. Without this
patch, backslashes copied out were deleted upon input, or interpreted as
special characters. Third, input is now terminated by backslash-period.
This can not be part of a normal input stream.
I tested this by creating a database with all sorts of nulls, backslash,
and period fields and dumped the database and reloaded into a new
database and compared them.
Submitted by: Bruce
and found out that one of the patches is a show stopper for
compiling under a strict ansi package.
Please make sure the following fix makes it into the 1.02.1
release...
Thanks.
-Kurt
|We're all too familiar with psql's "no response from backend" message.
|Users can't tell what this means, and psql continues prompting for
|commands after it even though the backend is dead and no commands can
|succeed. It eventually dies on a signal when the dead socket fills
|up. I extended the message to offer a better explanation and made
|psql exit when it finds the backend is dead.
|
|I also added a short message and newline when the user does a ctl-D so
|it doesn't mess up the terminal display.
|
|
Submitted by: Bryan Henderson <bryanh@giraffe.netgate.net>
don't indicate that the libpq.a library is a dependency of all the /bin
programs. So if the library changes, the /bin programs don't get remade.
Submitted by: Bryan Henderson <bryanh@giraffe.netgate.net>
directory. The code that looks for the pg_hba file doesn't use it, though,
so the postmaster uses the wrong pg_hba file. Also, when the postmaster
looks in one directory and the user thinks it is looking in another
directory, the error messages don't give enough information to solve the
problem. I extended the error message for this.
Submitted by: Bryan Henderson <bryanh@giraffe.netgate.net>
does 2 things:
1) Make it hard to not notice the make failed. (As you recall, someone on
the mailing list had this problem. I've had it to some extent myself).
The 1.02 make files continue with the next subdirectory when a make
in a subdirectory fails. The patch makes the make stop in the
conventional way when a submake fails. It also adds a reassuring message
when the make succeeds and adds a note to the INSTALL file to expect it.
2) Include loader flags on all invocations of the linker.
The 1.02 make files omit the $(LDFLAGS) on some of the linker invocations.
On my system, I need one of those flags just to make it invoke the proper
version of the compiler/linker, so LDFLAGS has to be everywhere.
Submitted by: Bryan Henderson <bryanh@giraffe.netgate.net>
Attached is a patch to allow libpq to determine if a field is null.
This is needed because text fields will return a PQgetlength() of 0
whether it is '' or NULL. There is even a comment in the source noting
the fact.
I have changed the value of the 'len' field for NULL result fields. If
the field is null, the len is set to -1 (NULL_LEN). I have changed
PQgetlength() to return a 0 length for both '' and NULL. A new function
PQgetisnull() returns true or false for NULL.
The only risk is to applications that do not use the suggested
PQgetlength() call, but read the result 'len' field directly.
As this is not recommended, I think we are safe here.
A separate documentation patch will be sent.
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
Here's a small patch that my run-time checker whines about
incessantly. The justification for the patch is along the
lines of passing a NULL is allowed if you have an
arguement that is a *POINTER* to something, but if
the arguement is an array reference, it's not really
a "pointer", so it can't be NULL.
If you question this, I refer you to
<URL:http://www.va.pubnix.com/staff/djm/lore/arrays-are-not-pointers>
Anyways, here's the patch:
-Kurt
Submitted by: "Kurt J. Lidl" <lidl@va.pubnix.com>
This patch forces postgres95 to assume any floating-point value is a
float8. It removes the requirement that you cast all floating-point
constants to float8.
We can remove alot of casts in the regression test after we are sure
this works.
If I have missed anything, would someone let me know. I have tested
inserts of floating-point values into float8 fields, and it worked well.
Casting the number to float4 showed the same precision loss as previous
uncast values showed.
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
There is a support routine in the standard 4.4BSD C library
called "err()". There is also a utility routine in
.../src/backend/bootstrap/bootstrap.c
with the same name.
Here's a patch that renames the pg95 routine to something a little
more sane. As a bonus, one more bit of system-specific code leaves
the system...
Submitted by: "Kurt J. Lidl" <lidl@va.pubnix.com>
Also, I think that an extra source of noise in the diff of regress.out and
expected.out is caused by not substituting the shared library file
extension in the regression.input file (much like the paths and the
usernames are sub'ed). This seems to be fixed with the following patches
to regression.input and the Makefile... If I'm off base here, please tell!
Submitted by: Wayde Nie <niew@phoenix.cis.mcmaster.ca>
I've enclosed two patches. The first affects Solaris compilability. The
bug stems from netdb.h (where MAXHOSTNAMELEN is defined on a stock
system). If the user has installed the header files from BIND 4.9.x,
there will be no definition of MAXHOSTNAMELEN. The patch will, if all
else fails, try to include <arpa/nameser.h> and set MAXHOSTNAMELEN to
MAXDNAME, which is 256 (just like MAXHOSTNAMELEN on a stock system).
The second patch adds aliases for "ISNULL" to "IS NULL" and likewise for
"NOTNULL" to "IS NOT NULL". I have not removed the postgres specific
ISNULL and NOTNULL. I noticed this on the TODO list, and figured it would
be easy to remove.
The full semantics are:
[ expression IS NULL ]
[ expression IS NOT NULL ]
--Jason
Submitted by: Jason Wright <jason@oozoo.vnet.net>
Previously Postgres95 wouldn't accept 'order by' clauses with fields
referred to as '<table>.<field>', e.g.:
select t1.field1, t2.field2 from table1 t1, table2 t2
order by t2.field2;
This syntax is required by the ODBC SQL spec.
Submitted by: Dan McGuirk <mcguirk@indirect.com>
While a normal SELECT statement can contain a GROUP BY clause, a cursor
declaration cannot. This was not the case in PG-1.0. Was there a good
reason why this was changed? Are cursors being phased out? Is there any way
to get data with just a SELECT (and without a DECLARE CURSOR ...)?
The patch below seems to fix things. If anyone can see a problem with it,
please let me know. Thanks.
Submitted by: David Smith <dasmith@perseus.tufts.edu>
Here are a few minor fixes to Postgres95. Mostly I have added const
to some of the char pointers. There was also a missing header file
and a place where it looks like "==" was used when "=" was meant.
I also changed some variables from Pfin and Pfout tp pfin and pfout
because the latter shadow global variables and that just seems like
an unsafe practice which I like to avoid.
Submitted by: "D'Arcy J.M. Cain" <darcy@druid.druid.com>
Someone asked me if the bpchar type could be extended to do
case-insensitive regular expression searches.
Submitted by: "Alistair G. Crooks" <azcb0@juts.ccc.amdahl.com>
Originally, I thought the problem was caused by a function that gets
called as a normal function where we want to return a value, and as a
signal handler where we need to have it accept a parameter (the signal
number) and it returns nothing, I was going to case the function name in
the signal call as (void (*)(int)).
Looking at all the source, it turns out this function only gets used as
a signal handler, so I set an int parameter and return void.
I have removed the Linux defines because they are not needed. BSD let
this sloppiness slide. Linux gave a compile error.
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
In postgres95/src/backend/nodes/readfuncs, lines 1188 and 1189,
local_node->relname is taken to point to a NameType, while its
defined as a pointer to char. Both the casting to Name and the
call of namestrcpy should, IMHO, be changed appropriately (first
patch).
As far as I could see from the Linux signal header file,
a signal handler is declared as
typedef void (*__sighandler_t)(int);
Few changes to postgres95/src/backend/storage/lmgr/proc.c seem
appropriate to comply with this.
Finally, postgres95/src/bin/pg_version/pg_version.c defines
a function GetDataHome (by default, returning an integer)
and returns NULL in the function, which isn't an integer...
Submitted by: ernst.molitor@uni-bonn.de
updates the psql.1 manual page for \ options
add row count and ties it to the header option
updated manual pages and comment for above change
got \? to display in one screen-full (almost, \? scrolls off top)
moved \r to \E, and \z to \r (for historical reasons with monitor)
small code alignment cleanup
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
Marc G. Fournier