OpenSSL 1.0.2 has been EOL from the upstream OpenSSL project for
some time, and is no longer the default OpenSSL version with any
vendor which package PostgreSQL. By retiring support for OpenSSL
1.0.2 we can remove a lot of no longer required complexity for
managing state within libcrypto which is now handled by OpenSSL.
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/ZG3JNursG69dz1lr@paquier.xyz
Discussion: https://postgr.es/m/CA+hUKGKh7QrYzu=8yWEUJvXtMVm_CNWH1L_TLWCbZMwbi1XP2Q@mail.gmail.com
Commit 274bbced disabled session tickets for TLSv1.3 on top of the
already disabled TLSv1.2 session tickets, but accidentally caused
a regression where TLSv1.2 session tickets were incorrectly sent.
Fix by unconditionally disabling TLSv1.2 session tickets and only
disable TLSv1.3 tickets when the right version of OpenSSL is used.
Backpatch to all supported branches.
Reported-by: Cameron Vogt <cvogt@automaticcontrols.net>
Reported-by: Fire Emerald <fire.github@gmail.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/DM6PR16MB3145CF62857226F350C710D1AB852@DM6PR16MB3145.namprd16.prod.outlook.com
Backpatch-through: v12
Commit 453c468737 introduced a use of strerror() into libpq, but that
is not thread-safe. Fix by using strerror_r() instead.
In passing, update some of the code comments added by 453c468737, as
we have learned more about the reason for the change in OpenSSL that
started this.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: Discussion: https://postgr.es/m/b6fb018b-f05c-4afd-abd3-318c649faf18@highgo.ca
OpenSSL supports two types of session tickets for TLSv1.3, stateless
and stateful. The option we've used only turns off stateless tickets
leaving stateful tickets active. Use the new API introduced in 1.1.1
to disable all types of tickets.
Backpatch to all supported versions.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20240617173803.6alnafnxpiqvlh3g@awork3.anarazel.de
Backpatch-through: v12
All the errors triggered in the code paths patched here would cause the
backend to issue an internal_error errcode, which is a state that should
be used only for "can't happen" situations. However, these code paths
are reachable by the regression tests, and could be seen by users in
valid cases. Some regression tests expect internal errcodes as they
manipulate the backend state to cause corruption (like checksums), or
use elog() because it is more convenient (like injection points), these
have no need to change.
This reduces the number of internal failures triggered in a check-world
by more than half, while providing correct errcodes for these valid
cases.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/Zic_GNgos5sMxKoa@paquier.xyz
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf6 and
8d9978a717, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
If the client supports ALPN but tries to use some other protocol, like
HTTPS, reject the connection in the server. That is surely a confusion
of some sort. Furthermore, the ALPN RFC 7301 says:
> In the event that the server supports no protocols that the client
> advertises, then the server SHALL respond with a fatal
> "no_application_protocol" alert.
This commit makes the server follow that advice.
In the client, specifically check for the OpenSSL error code for the
"no_application_protocol" alert. Otherwise you got a cryptic "SSL
error: SSL error code 167773280" error if you tried to connect to a
non-PostgreSQL server that rejects the connection with
"no_application_protocol". ERR_reason_error_string() returns NULL for
that code, which frankly seems like an OpenSSL bug to me, but we can
easily print a better message ourselves.
Reported-by: Jacob Champion
Discussion: https://www.postgresql.org/message-id/6aedcaa5-60f3-49af-a857-2c76ba55a1f3@iki.fi
The SSL_R_VERSION_TOO_LOW error reason is supported in LibreSSL since
LibreSSL 3.6.3, shipped in OpenBSD 7.2. SSL_R_VERSION_TOO_HIGH is on
the other hand not supported in any version of LibreSSL. Previously
we only checked for SSL_R_VERSION_TOO_HIGH and then applied both under
that guard since OpenSSL has only ever supported both at the same time.
This breaks the check into one per reason to allow SSL_R_VERSION_TOO_LOW
to work when using LibreSSL.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/eac70d46-e61c-4d71-a1e1-78e2bfa19485@eisentraut.org
LibreSSL doesn't support the SSL_OP_NO_RENEGOTIATION macro which is
used by OpenSSL, instead it has invented a similar one for client-
side renegotiation: SSL_OP_NO_CLIENT_RENEGOTIATION. This has been
supported since LibreSSL 2.5.1 which by now can be considered well
below the minimum requirement.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/eac70d46-e61c-4d71-a1e1-78e2bfa19485@eisentraut.org
libpq now always tries to send ALPN. With the traditional negotiated
SSL connections, the server accepts the ALPN, and refuses the
connection if it's not what we expect, but connecting without ALPN is
still OK. With the new direct SSL connections, ALPN is mandatory.
NOTE: This uses "TBD-pgsql" as the protocol ID. We must register a
proper one with IANA before the release!
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate. OpenSSL has
APIs for extracting notAfter and notBefore, but they are only
supported in recent versions so we have to calculate the dates
by hand in order to make this work for the older versions of
OpenSSL that we still support.
Original patch by Cary Huang with additional hacking by Jacob
and myself.
Author: Cary Huang <cary.huang@highgo.ca>
Co-author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
In OpenSSL 3.0.0 and later, ERR_reason_error_string randomly refuses
to provide a string for error codes representing system errno values
(e.g., "No such file or directory"). There is a poorly-documented way
to extract the errno from the SSL error code in this case, so do that
and apply strerror, rather than falling back to reporting the error
code's numeric value as we were previously doing.
Problem reported by David Zhang, although this is not his proposed
patch; it's instead based on a suggestion from Heikki Linnakangas.
Back-patch to all supported branches, since any of them are likely
to be used with recent OpenSSL.
Discussion: https://postgr.es/m/b6fb018b-f05c-4afd-abd3-318c649faf18@highgo.ca
OpenSSL will sometimes return SSL_ERROR_SYSCALL without having set
errno; this is apparently a reflection of recv(2)'s habit of not
setting errno when reporting EOF. Ensure that we treat such cases
the same as read EOF. Previously, we'd frequently report them like
"could not accept SSL connection: Success" which is confusing, or
worse report them with an unrelated errno left over from some
previous syscall.
To fix, ensure that errno is zeroed immediately before the call,
and report its value only when it's not zero afterwards; otherwise
report EOF.
For consistency, I've applied the same coding pattern in libpq's
pqsecure_raw_read(). Bare recv(2) shouldn't really return -1 without
setting errno, but in case it does we might as well cope.
Per report from Andres Freund. Back-patch to all supported versions.
Discussion: https://postgr.es/m/20231208181451.deqnflwxqoehhxpe@awork3.anarazel.de
Quotes are applied to GUCs in a very inconsistent way across the code
base, with a mix of double quotes or no quotes used. This commit
removes double quotes around all the GUC names that are obviously
referred to as parameters with non-English words (use of underscore,
mixed case, etc).
This is the result of a discussion with Álvaro Herrera, Nathan Bossart,
Laurenz Albe, Peter Eisentraut, Tom Lane and Daniel Gustafsson.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w@mail.gmail.com
We should have done it this way all along, but we accidentally got
away with using the wrong BIO field up until OpenSSL 3.2. There,
the library's BIO routines that we rely on use the "data" field
for their own purposes, and our conflicting use causes assorted
weird behaviors up to and including core dumps when SSL connections
are attempted. Switch to using the approved field for the purpose,
i.e. app_data.
While at it, remove our configure probes for BIO_get_data as well
as the fallback implementation. BIO_{get,set}_app_data have been
there since long before any OpenSSL version that we still support,
even in the back branches.
Also, update src/test/ssl/t/001_ssltests.pl to allow for a minor
change in an error message spelling that evidently came in with 3.2.
Tristan Partin and Bo Andreson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAN55FZ1eDDYsYaL7mv+oSLUij2h_u6hvD4Qmv-7PK7jkji0uyQ@mail.gmail.com
Guard against the pointer being NULL before pfreeing upon an error
returned from OpenSSL. Also handle errors from X509_NAME_print_ex
which can return -1 on memory allocation errors.
Backpatch down to v15 where the code was added.
Author: Sergey Shinderuk <s.shinderuk@postgrespro.ru>
Discussion: https://postgr.es/m/8db5374d-32e0-6abb-d402-40762511eff2@postgrespro.ru
Backpatch-through: v15
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate.
Author: Cary Huang <cary.huang@highgo.ca>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
Here are some notes about this change:
- As X509_get_signature_nid() should always exist (OpenSSL and
LibreSSL), hence HAVE_X509_GET_SIGNATURE_NID is now gone.
- OPENSSL_API_COMPAT is bumped to 0x10002000L.
- One comment related to 1.0.1e introduced by 74242c2 is removed.
Upstream OpenSSL still provides long-term support for 1.0.2 in a closed
fashion, so removing it is out of scope for a few years, at least.
Reviewed-by: Jacob Champion, Daniel Gustafsson
Discussion: https://postgr.es/m/ZG3JNursG69dz1lr@paquier.xyz
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Commit 0a20ff54f split out the GUC variables from guc.c into a new file
guc_tables.c. This updates comments referencing guc.c regarding variables
which are now in guc_tables.c.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/6B50C70C-8C1F-4F9A-A7C0-EEAFCC032406@yesql.se
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Commit 3a0e385048 introduced a new path for unauthenticated bytes from
the client certificate to be printed unescaped to the logs. There are a
handful of these already, but it doesn't make sense to keep making the
problem worse. \x-escape any unprintable bytes.
The test case introduces a revoked UTF-8 certificate. This requires the
addition of the `-utf8` flag to `openssl req`. Since the existing
certificates all use an ASCII subset, this won't modify the existing
certificates' subjects if/when they get regenerated; this was verified
experimentally with
$ make sslfiles-clean
$ make sslfiles
Unfortunately the test can't be run in the CI yet due to a test timing
issue; see 55828a6b60.
Author: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/CAAWbhmgsvHrH9wLU2kYc3pOi1KSenHSLAHBbCVmmddW6-mc_=w@mail.gmail.com
Currently, debugging client certificate verification failures is
mostly limited to looking at the TLS alert code on the client side.
For simple deployments, sometimes it's enough to see "sslv3 alert
certificate revoked" and know exactly what needs to be fixed, but if
you add any more complexity (multiple CA layers, misconfigured CA
certificates, etc.), trying to debug what happened based on the TLS
alert alone can be an exercise in frustration.
Luckily, the server has more information about exactly what failed in
the chain, and we already have the requisite callback implemented as a
stub. We fill that in, collect the data, and pass the constructed
error message back to the main code via a static variable. This lets
us add our error details directly to the final "could not accept SSL
connection" log message, as opposed to issuing intermediate LOGs.
It ends up looking like
LOG: connection received: host=localhost port=43112
LOG: could not accept SSL connection: certificate verify failed
DETAIL: Client certificate verification failed at depth 1: unable to get local issuer certificate.
Failed certificate data (unverified): subject "/CN=Test CA for PostgreSQL SSL regression test client certs", serial number 2315134995201656577, issuer "/CN=Test root CA for PostgreSQL SSL regression test suite".
The length of the Subject and Issuer strings is limited to prevent
malicious client certs from spamming the logs. In case the truncation
makes things ambiguous, the certificate's serial number is also
logged.
Author: Jacob Champion <pchampion@vmware.com>
Discussion: https://www.postgresql.org/message-id/flat/d13c4a5787c2a3f83705124f0391e0738c796751.camel@vmware.com
After further investigation, it seems the cause of the problem
is our recent decision to start defining WIN32_LEAN_AND_MEAN.
That causes <windows.h> to no longer include <wincrypt.h>, which
means that the OpenSSL headers are unable to prevent conflicts
with that header by #undef'ing the conflicting macros. Apparently,
some other system header that be-secure-openssl.c #includes after
the OpenSSL headers is pulling in <wincrypt.h>. It's obscure just
where that happens and why we're not seeing it on other Windows
buildfarm animals. However, it should work to move the OpenSSL
#includes to the end of the list. For the sake of future-proofing,
do likewise in fe-secure-openssl.c. In passing, remove useless
double inclusions of <openssl/ssl.h>.
Thanks to Thomas Munro for running down the relevant information.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
Buildfarm member hamerkop has been failing for the last few days
with errors that look like OpenSSL's X509-related symbols have
not been imported into be-secure-openssl.c. It's unclear why
this should be, but let's try adding an explicit #include of
<openssl/x509v3.h>, as there has long been in fe-secure-openssl.c.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
In OpenSSL there are two types of BIO's (I/O abstractions):
source/sink and filters. A source/sink BIO is a source and/or
sink of data, ie one acting on a socket or a file. A filter
BIO takes a stream of input from another BIO and transforms it.
In order for BIO_find_type() to be able to traverse the chain
of BIO's and correctly find all BIO's of a certain type they
shall have the type bit set accordingly, source/sink BIO's
(what PostgreSQL implements) use BIO_TYPE_SOURCE_SINK and
filter BIO's use BIO_TYPE_FILTER. In addition to these, file
descriptor based BIO's should have the descriptor bit set,
BIO_TYPE_DESCRIPTOR.
The PostgreSQL implementation didn't set the type bits, which
went unnoticed for a long time as it's only really relevant
for code auditing the OpenSSL installation, or doing similar
tasks. It is required by the API though, so this fixes it.
Backpatch through 9.6 as this has been wrong for a long time.
Author: Itamar Gafni
Discussion: https://postgr.es/m/SN6PR06MB39665EC10C34BB20956AE4578AF39@SN6PR06MB3966.namprd06.prod.outlook.com
Backpatch-through: 9.6
SSL renegotiation is already disabled as of 48d23c72, however this does
not prevent the server to comply with a client willing to use
renegotiation. In the last couple of years, renegotiation had its set
of security issues and flaws (like the recent CVE-2021-3449), and it
could be possible to crash the backend with a client attempting
renegotiation.
This commit takes one extra step by disabling renegotiation in the
backend in the same way as SSL compression (f9264d15) or tickets
(97d3a0b0). OpenSSL 1.1.0h has added an option named
SSL_OP_NO_RENEGOTIATION able to achieve that. In older versions
there is an option called SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS that
was undocumented, and could be set within the SSL object created when
the TLS connection opens, but I have decided not to use it, as it feels
trickier to rely on, and it is not official. Note that this option is
not usable in OpenSSL < 1.1.0h as the internal contents of the *SSL
object are hidden to applications.
SSL renegotiation concerns protocols up to TLSv1.2.
Per original report from Robert Haas, with a patch based on a suggestion
by Andres Freund.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/YKZBXx7RhU74FlTE@paquier.xyz
Backpatch-through: 9.6
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
Currently we only recognize the Common Name (CN) of a certificate's
subject to be matched against the user name. Thus certificates with
subjects '/OU=eng/CN=fred' and '/OU=sales/CN=fred' will have the same
connection rights. This patch provides an option to match the whole
Distinguished Name (DN) instead of just the CN. On any hba line using
client certificate identity, there is an option 'clientname' which can
have values of 'DN' or 'CN'. The default is 'CN', the current procedure.
The DN is matched against the RFC2253 formatted DN, which looks like
'CN=fred,OU=eng'.
This facility of probably best used in conjunction with an ident map.
Discussion: https://postgr.es/m/92e70110-9273-d93c-5913-0bccb6562740@dunslane.net
Reviewed-By: Michael Paquier, Daniel Gustafsson, Jacob Champion
While back-patching e0e569e1d, I noted that there were some other
places where we ought to be applying DH_free(); namely, where we
load some DH parameters from a file and then reject them as not
being sufficiently secure. While it seems really unlikely that
anybody would hit these code paths in production, let alone do
so repeatedly, let's fix it for consistency.
Back-patch to v10 where this code was introduced.
Discussion: https://postgr.es/m/16160-18367e56e9a28264@postgresql.org
After reading the root cert list from the ssl_ca_file, immediately
install it as client CA list of the new SSL context. That gives the
SSL context ownership of the list, so that SSL_CTX_free will free it.
This avoids a permanent memory leak if we fail further down in
be_tls_init(), which could happen if bogus CRL data is offered.
The leak could only amount to something if the CRL parameters get
broken after server start (else we'd just quit) and then the server
is SIGHUP'd many times without fixing the CRL data. That's rather
unlikely perhaps, but it seems worth fixing, if only because the
code is clearer this way.
While we're here, add some comments about the memory management
aspects of this logic.
Noted by Jelte Fennema and independently by Andres Freund.
Back-patch to v10; before commit de41869b6 it doesn't matter,
since we'd not re-execute this code during SIGHUP.
Discussion: https://postgr.es/m/16160-18367e56e9a28264@postgresql.org
PostgreSQL disabled compression as of e3bdb2d and the documentation
recommends against using it since. Additionally, SSL compression has
been disabled in OpenSSL since version 1.1.0, and was disabled in many
distributions long before that. The most recent TLS version, TLSv1.3,
disallows compression at the protocol level.
This commit removes the feature itself, removing support for the libpq
parameter sslcompression (parameter still listed for compatibility
reasons with existing connection strings, just ignored), and removes
the equivalent field in pg_stat_ssl and de facto PgBackendSSLStatus.
Note that, on top of removing the ability to activate compression by
configuration, compression is actively disabled in both frontend and
backend to avoid overrides from local configurations.
A TAP test is added for deprecated SSL parameters to check after
backwards compatibility.
Bump catalog version.
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/7E384D48-11C5-441B-9EC3-F7DB1F8518F6@yesql.se
Add another method to specify CRLs, hashed directory method, for both
server and client side. This offers a means for server or libpq to
load only CRLs that are required to verify a certificate. The CRL
directory is specifed by separate GUC variables or connection options
ssl_crl_dir and sslcrldir, alongside the existing ssl_crl_file and
sslcrl, so both methods can be used at the same time.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/20200731.173911.904649928639357911.horikyota.ntt@gmail.com
The callback for retrieving state change information during connection
setup was only installed when the connection was mostly set up, and
thus didn't provide much information and missed all the details related
to the handshake.
This also extends the callback with SSL_state_string_long() to print
more information about the state change within the SSL object handled.
While there, fix some comments which were incorrectly referring to the
callback and its previous location in fe-secure.c.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/232CF476-94E1-42F1-9408-719E2AEC5491@yesql.se
* Avoid pointlessly highlighting that an index vacuum was executed by a
parallel worker; user doesn't care.
* Don't give the impression that a non-concurrent reindex of an invalid
index on a TOAST table would work, because it wouldn't.
* Add a "translator:" comment for a mysterious message.
Discussion: https://postgr.es/m/20201107034943.GA16596@alvherre.pgsql
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Commit d94c36a45a introduced error handling to sslinfo to handle
OpenSSL errors gracefully. This ports this errorhandling to the
backend TLS implementation.
Author: Daniel Gustafsson <daniel@yesql.se>
Peter Eisentraut