WAIT FOR LSN compares only the numeric LSN and has no notion of which
timeline a WAL record belongs to. There are many possible scenarios when
timeline-switching can break read-your-writes consistency. The proper
analysis and timeline support is possible in the next major release. Yet
just document the current behaviour.
Reported-by: Xuneng Zhou <xunengzhou@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
GetCurrentLSNForWaitType() for standby_write and standby_flush modes
returned only the walreceiver position, which may lag behind WAL
already present on the standby from a base backup, archive restore,
or prior streaming. This could cause unnecessary blocking if the
target LSN falls between the walreceiver's tracked position and the
replay position.
Fix by returning the maximum of the walreceiver position and the
replay position. WAL up to the replay point is physically on disk
regardless of its origin, so there is no reason to wait for the
walreceiver to re-receive it.
This complements 29e7dbf5e4, which seeded writtenUpto to
receiveStart in RequestXLogStreaming() to fix the most common
hang scenario. The getter-level floor handles the remaining edge
cases: targets between receiveStart and the replay position, and
standbys running with archive recovery only (no walreceiver).
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1957514.1775526774%40sss.pgh.pa.us
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
According to the SQL/JSON standard, JSON_ARRAY(query) must return an
empty JSON array ('[]') when the subquery returns zero rows.
Previously, the parser rewrote JSON_ARRAY(query) into a JSON_ARRAYAGG
aggregate function. Because this aggregate evaluates to NULL over an
empty set without a GROUP BY clause, the constructor erroneously
returned NULL. Additionally, this premature rewrite baked physical
implementation details into the catalog, preventing ruleutils.c from
deparsing the original syntax for views.
This patch resolves both issues by introducing a new
JSCTOR_JSON_ARRAY_QUERY constructor type. The parser builds the
executable form --- a COALESCE-wrapped JSON_ARRAYAGG subquery --- from
raw parse nodes via transformExprRecurse, and stores it in the func
field. The original transformed Query is kept in a new orig_query
field so that ruleutils.c can deparse the original syntax for views.
During planning, eval_const_expressions replaces the node with the
pre-built func expression.
The deparsing issue was reported by Tom Lane.
Bump catalog version.
Bug: #19418
Reported-by: Lukas Eder <lukas.eder@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/19418-591ba1f29862ef5b@postgresql.org
We need to create top-level targets to run targets with the ninja
command like `ninja <target_name>`.
Some targets (man, html, ...) have the same target name on both
top-level and custom target. This creates a confusion for the meson
build:
$ meson compile -C build html
```
ERROR: Can't invoke target `html`: ambiguous name. Add target type
and/or path:
- ./doc/src/sgml/html:custom
- ./doc/src/sgml/html:alias
```
Solve that problem by adding '-custom' suffix to these problematic
targets' custom target names. Top-level targets can be called with
both meson and ninja now:
$ meson compile -C build html
$ ninja -C build html
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Suggested-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/5508e572-79ae-4b20-84d0-010a66d077f2%40eisentraut.org
The psql describe (`\d`) footer titles were previously unintuitive when
listing publications that included or excluded specific tables. Even
though the tag for included publications was pre-existing, it is better
to update it to "Included in publications:" to match the phrasing of
the "Excluded from publications:" tag.
Footer titles for sequence and schema descriptions have been updated
similarly to maintain consistency.
Reported-by: Álvaro Herrera <alvherre@kurilemu.de>
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Yuchen Li <liyuchen_xyz@163.com>
Discussion: https://postgr.es/m/aeDs7iZUox1bbKAK%40alvherre.pgsql
When using ALTER TABLE ... MERGE PARTITIONS or ALTER TABLE ... SPLIT
PARTITION, extension dependencies on partition indexes were being lost.
This happened because the new partition indexes are created fresh from
the parent partitioned table's indexes, while the old partition indexes
(with their extension dependencies) are dropped.
Fix this by collecting extension dependencies from source partition
indexes before detaching them, then applying those dependencies to the
corresponding new partition indexes after they're created. The mapping
between old and new indexes is done via their common parent partitioned
index.
For MERGE operations, all source partition indexes sharing a parent
partitioned index must have the same extension dependencies; if they
differ, an error naming both conflicting partition indexes is raised.
The check is implemented by collecting one entry per partition index,
sorting by parent index OID, and comparing adjacent entries in a single
pass. This is order-independent: the same set of partitions produces
the same decision regardless of the order they are listed in the MERGE
command, and subset mismatches are caught in both directions.
For SPLIT operations, the new partition indexes simply inherit all
extension dependencies from the source partition's index.
The regression tests exercising this feature live under
src/test/modules/test_extensions, where the test_ext3 and test_ext5
extensions are available; core regression tests cannot assume any
particular extension is installed.
Author: Matheus Alcantara <matheusssilv97@gmail.com>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Reported-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/CALdSSPjXtzGM7Uk4fWRwRMXcCczge5uNirPQcYCHKPAWPkp9iQ%40mail.gmail.com
This batch is similar to 462fe0ff62 and addresses a variety of code
style issues, including grammar mistakes, typos, inconsistent variable
names in function declarations, and incorrect function names in comments
and documentation. These fixes have accumulated on the community
mailing lists since the commit mentioned above.
Notably, Alexander Lakhin previously submitted a patch identifying many
of the trivial typos and grammar issues that had been reported on
pgsql-hackers. His patch covered a somewhat large portion of the issues
addressed here, though not all of them.
The documentation changes only affect HEAD.
The documentation previously described the io_max_workers,
io_worker_idle_timeout, and io_worker_launch_interval GUCs as
type "int". However, the documentation consistently uses "integer"
for parameters of this type.
This commit updates these parameter descriptions to use "integer"
for consistency.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAHGQGwEpMDpB-K8SSUVRRHg6L6z3pLAkekd9aviOS=ns0EC=+Q@mail.gmail.com
The documentation for jit_debugging_support and jit_profiling_support
previously stated that these parameters can only be set at server start.
However, both parameters use the PGC_SU_BACKEND context, meaning they
can be set at session start by superusers or users granted the appropriate
SET privilege, but cannot be changed within an active session.
This commit updates the documentation to reflect the actual behavior.
Backpatch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAHGQGwEpMDpB-K8SSUVRRHg6L6z3pLAkekd9aviOS=ns0EC=+Q@mail.gmail.com
Backpatch-through: 14
The second function signature entry for pg_get_tablespace_ddl() was
missing the role="func_signature" attribute. This commit adds the
missing attribute to ensure consistent formatting with other function
entries.
Author: Tatsuya Kawata <kawatatatsuya0913@gmail.com>
Discussion: https://postgr.es/m/CAHza6qcSgwdh+f41zEm6NSaGHvs5_cwjVu22+KTic=TfnonrFA@mail.gmail.com
Replace the previous negative phrasing such as "there are no slots whose
... is not true" with a direct expression that all slots must have
conflicting = false.
Similarly, reword the requirement on the new cluster to state that it must
not have any permanent logical slots, clarifying that any existing logical
slots must have temporary set to true.
These changes improve readability without altering the meaning.
Reported-by: <mimidatabase@gmail.com>
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/177609278737.403059.14174275013090471947%40wrigleys.postgresql.org
The documentation stated only that the log file created by pg_ctl -l is
inaccessible to other users by default. However, since commit c37b3d0,
the actual behavior is that only the cluster owner has access by default,
but users in the same group as the cluster owner may also read the file
if group access is enabled in the cluster.
This commit updates the documentation to describe this behavior
more clearly.
Backpatch to all supported versions.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Reviewed-by: Xiaopeng Wang <wxp_728@163.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/OS9PR01MB1214959BE987B4839E3046050F54BA@OS9PR01MB12149.jpnprd01.prod.outlook.com
Backpatch-through: 14
The ssl_sni and hosts_file GUCs were missing from the configuration
section of the documentation, they were only described in the main
SSL SNI subsection. This adds the GUCs to the relevant sections as
well as rewords the existing SSL SNI documentation to refer to the
settings along with a few smaller fixups.
Author: Daniel Gustafsson <daniel@yesql.se>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwESD2Pty+J1kP3mXmWwMKZ5uJmknZdJsSGrMSRR6CQBmw@mail.gmail.com
Previously we were relying on a snapshot-based check to detect invalid
execution contexts. However, when WAIT FOR is wrapped into a stored
procedure or a DO block, it could pass this check, causing an error
elsewhere.
This commit implements an explicit isTopLevel check to reject WAIT FOR
when called from within a function, procedure, or DO block. The
isTopLevel check catches these cases early with a clear error message,
matching the pattern used by other utility commands like VACUUM and
REINDEX. The snapshot check is retained for the remaining case:
top-level execution within a transaction block using an isolation level
higher than READ COMMITTED.
Also adds tests for WAIT FOR LSN wrapped in a procedure and DO block,
complementing the existing test that uses a function wrapper. Relevant
documentation paragraph is also added.
Reported-by: Satyanarayana Narlapuram <satyanarlapuram@gmail.com>
Discussion: https://postgr.es/m/CAHg%2BQDcN-n3NUqgRtj%3DBQb9fFQmH8-DeEROCr%3DPDbw_BBRKOYA%40mail.gmail.com
Author: Satyanarayana Narlapuram <satyanarlapuram@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Use consistent phrasing for parallel vacuum descriptions between
manual VACUUM and autovacuum. Specifically, clarify that the parallel
worker count is limited by the respective options only if they are
explicitly specified.
Also, fix a typo in the parallel vacuum section.
Author: Aleksander Alekseev <aleksander@tigerdata.com>
Discussion: https://postgr.es/m/CAJ7c6TPcSqzhbhrsiCMmVwmE8F7pwS7i9J49SP1zPKS_ER+vcA@mail.gmail.com
Commit f19c0eccae changed the data_checksums GUC datatype from a
boolean to an enum. This updates the documentation to accurately
reflect its new type and document the new possible states: 'on',
'off', 'inprogress-on', and 'inprogress-off'.
Also update the xref for more information to point to the section
on data checksums rather than the initdb checksum option.
Author: Lakshmi N <lakshmin.jhs@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CA+3i_M-AtTnqTB2KLBTpu-c-jvnTuy7bGxyxs80rgiQLxWrRUQ@mail.gmail.com
Our RADIUS implementation supported only the deprecated RADIUS/UDP
variant, without the recommended Message-Authenticator attribute to
mitigate against the Blast-RADIUS vulnerability. By now, popular RADIUS
servers are expected to generate loud warnings or reject our
authentication attempts outright.
Since there have been no user reports about this, it seems unlikely that
there are users.
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Discussion: https://postgr.es/m/CA%2BhUKG%2BSH309V8KECU5%3DxuLP9Dks0v9f9UVS2W74fPAE5O21dg%40mail.gmail.com
Add a new FDW callback routine that allows importing remote statistics
for a foreign table directly to the local server, instead of collecting
statistics locally. The new callback routine is called at the beginning
of the ANALYZE operation on the table, and if the FDW failed to import
the statistics, the existing callback routine is called on the table to
collect statistics locally.
Also implement this for postgres_fdw. It is enabled by "restore_stats"
option both at the server and table level. Currently, it is the user's
responsibility to ensure remote statistics to import are up-to-date, so
the default is false.
Author: Corey Huinker <corey.huinker@gmail.com>
Co-authored-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CADkLM%3DchrYAx%3DX2KUcDRST4RLaRLivYDohZrkW4LLBa0iBhb5w%40mail.gmail.com
The size of the I/O worker pool used to implement io_method=worker was
previously controlled by the io_workers setting, defaulting to 3. It
was hard to know how to tune it effectively. That is replaced with:
io_min_workers=2
io_max_workers=8 (up to 32)
io_worker_idle_timeout=60s
io_worker_launch_interval=100ms
The pool is automatically sized within the configured range according to
recent variation in demand. It grows when existing workers detect that
latency might be introduced by queuing, and shrinks when the
highest-numbered worker is idle for too long. Work was already
concentrated into low-numbered workers in anticipation of this logic.
The logic for waking extra workers now also tries to measure and reduce
the number of spurious wakeups, though they are not entirely eliminated.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2Bm4xV0LMoH2c%3DoRAdEXuCnh%2BtGBTWa7uFeFMGgTLAw%2BQ%40mail.gmail.com
This was useful before widespread Unicode adoption, and was based on the
internal encoding Emacs used to mix multiple sub-encodings. Emacs
itself has stopped using it, and our implementation hadn't been updated
with modern underlying standards. It is thought to be very unlikely
that anyone is still using it in the field. Since such a complex
encoding comes with costs and risks, we agreed to drop support.
Any existing database using this encoding would need to be dumped and
restored with a new encoding to upgrade to PostgreSQL 19, most likely
UTF8, since pg_upgrade would fail.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/CA%2BhUKGKXDXh-FdU0orjfv%2BF08f%3DD91BhV3Ra-4zL-q%2BJmGYqTA%40mail.gmail.com
This adds support to pg_test_timing for the different timing sources added by
294520c444.
Author: Lukas Fittl <lukas@fittl.com>
Author: David Geier <geidav.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: David Geier <geidav.pg@gmail.com>
Reviewed-by: Zsolt Parragi <zsolt.parragi@percona.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de> (in an earlier version)
Discussion: https://www.postgresql.org/message-id/flat/20200612232810.f46nbqkdhbutzqdg%40alap3.anarazel.de
Allows collecting details about AIO / prefetch for scan nodes backed by
a ReadStream. This may be enabled by a new "IO" option in EXPLAIN, and
it shows information about the prefetch distance and I/O requests.
As of this commit this applies only to BitmapHeapScan, because that's
the only scan node using a ReadStream and collecting instrumentation
from workers in a parallel query. Support for SeqScan and TidRangeScan,
the other scan nodes using ReadStream, will be added in subsequent
commits.
The stats are collected only when required by EXPLAIN ANALYZE, with the
IO option (disabled by default). The amount of collected statistics is
very limited, but we don't want to clutter EXPLAIN with too much data.
The IOStats struct is stored in the scan descriptor as a field, next to
other fields used by table AMs. A pointer to the field is passed to the
ReadStream, and updated directly.
It's the responsibility of the table AM to allocate the struct (e.g. in
ambeginscan) whenever the flag SO_SCAN_INSTRUMENT flag is passed to the
scan, so that the executor and ReadStream has access to it.
The collected stats are designed for ReadStream, but are meant to be
reasonably generic in case a TAM manages I/Os in different ways.
Author: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Lukas Fittl <lukas@fittl.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/flat/a177a6dd-240b-455a-8f25-aca0b1c08c6e%40vondra.me
This allows the direct use of the Time-Stamp Counter (TSC) value retrieved
from the CPU using RDTSC/RDTSCP instructions, instead of APIs like
clock_gettime() on POSIX systems.
This reduces the overhead of EXPLAIN with ANALYZE and TIMING ON. Tests showed
that the overhead on top of actual runtime when instrumenting queries moving
lots of rows through the plan can be reduced from 2x as slow to 1.2x as slow
compared to the actual runtime. More complex workloads such as TPCH queries
have also shown ~20% gains when instrumented compared to before.
To control use of the TSC, the new "timing_clock_source" GUC is introduced,
whose default ("auto") automatically uses the TSC when reliable, for example
when running on modern Intel CPUs, or when running on Linux and the system
clocksource is reported as "tsc". The use of the operating system clock source
can be enforced by setting "system", or on x86-64 architectures the use of TSC
can be enforced by explicitly setting "tsc".
In order to use the TSC the frequency is first determined by use of CPUID, and
if not available, by running a short calibration loop at program start,
falling back to the system clock source if TSC values are not stable.
Note, that we split TSC usage into the RDTSC CPU instruction which does not
wait for out-of-order execution (faster, less precise) and the RDTSCP
instruction, which waits for outstanding instructions to retire. RDTSCP is
deemed to have little benefit in the typical InstrStartNode() /
InstrStopNode() use case of EXPLAIN, and can be up to twice as slow. To
separate these use cases, the new macro INSTR_TIME_SET_CURRENT_FAST() is
introduced, which uses RDTSC.
The original macro INSTR_TIME_SET_CURRENT() uses RDTSCP and is supposed to be
used when precision is more important than performance. When the system timing
clock source is used both of these macros instead utilize the system
APIs (clock_gettime / QueryPerformanceCounter) like before.
Additional users of interval timing, such as track_io_timing and
track_wal_io_timing could also benefit from being converted to use
INSTR_TIME_SET_CURRENT_FAST() but are left for future changes.
Author: Lukas Fittl <lukas@fittl.com>
Author: Andres Freund <andres@anarazel.de>
Author: David Geier <geidav.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: David Geier <geidav.pg@gmail.com>
Reviewed-by: Lukas Fittl <lukas@fittl.com>
Reviewed-by: Zsolt Parragi <zsolt.parragi@percona.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com> (in an earlier version)
Reviewed-by: Maciek Sakrejda <m.sakrejda@gmail.com> (in an earlier version)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (in an earlier version)
Reviewed-by: Jakub Wartak <jakub.wartak@enterprisedb.com> (in an earlier version)
Discussion: https://postgr.es/m/20200612232810.f46nbqkdhbutzqdg@alap3.anarazel.de
OAuth validators can already use custom GUCs to configure behavior
globally. But we currently provide no ability to adjust settings for
individual HBA entries, because the original design focused on a world
where a provider covered a "single audience" of users for one database
cluster. This assumption does not apply to multitenant use cases, where
a single validator may be controlling access for wildly different user
groups.
To improve this use case, add two new API calls for use by validator
callbacks: RegisterOAuthHBAOptions() and GetOAuthHBAOption().
Registering options "foo" and "bar" allows a user to set "validator.foo"
and "validator.bar" in an oauth HBA entry. These options are stringly
typed (syntax validation is solely the responsibility of the defining
module), and names are restricted to a subset of ASCII to avoid tying
our hands with future HBA syntax improvements.
Unfortunately, we can't check the custom option names during a reload of
the configuration, like we do with standard HBA options, without
requiring all validators to be loaded via shared_preload_libraries.
(I consider this to be a nonstarter: most validators should probably use
session_preload_libraries at most, since requiring a full restart just
to update authentication behavior will be unacceptable to many users.)
Instead, the new validator.* options are checked against the registered
list at connection time.
Multiple alternatives were proposed and/or prototyped, including
extending the GUC system to allow per-HBA overrides, joining forces with
recent refactoring work on the reloptions subsystem, and giving the
ability to customize HBA options to all PostgreSQL extensions. I
personally believe per-HBA GUC overrides are the best option, because
several existing GUCs like authentication_timeout and pre_auth_delay
would fit there usefully. But the recent addition of SNI per-host
settings in 4f433025f indicates that a more general solution is needed,
and I expect that to take multiple releases' worth of discussion.
This compromise patch, then, is intentionally designed to be an
architectural dead end: simple to describe, cheap to maintain, and
providing just enough functionality to let validators move forward for
PG19. The hope is that it will be replaced in the future by a solution
that can handle per-host, per-HBA, and other per-context configuration
with the same functionality that GUCs provide today. In the meantime,
the bulk of the code in this patch consists of strict guardrails on the
simple API, to try to ensure that we don't have any reason to regret its
existence during its unknown lifespan.
I owe particular thanks here to Zsolt Parragi, who prototyped several
approaches that guided the final design.
Suggested-by: Zsolt Parragi <zsolt.parragi@percona.com>
Suggested-by: VASUKI M <vasukianand0119@gmail.com>
Reviewed-by: Zsolt Parragi <zsolt.parragi@percona.com>
Discussion: https://postgr.es/m/CAN4CZFM3b8u5uNNNsY6XCya257u%2BDofms3su9f11iMCxvCacag%40mail.gmail.com
PGOAUTHDEBUG is a blunt instrument: you get all the debugging features,
or none of them. The most annoying consequence during manual use is the
Curl debug trace, which tends to obscure the device flow prompt
entirely. The promotion of PGOAUTHCAFILE into its own feature in
993368113 improved the situation somewhat, but there's still the
discomfort of knowing you have to opt into many dangerous behaviors just
to get the single debug feature you wanted.
Explode the PGOAUTHDEBUG syntax into a comma-separated list. The old
"UNSAFE" value enables everything, like before. Any individual unsafe
features still require the envvar to begin with an "UNSAFE:" prefix, to
try to interrupt the flow of someone who is about to do something they
should not.
So now, rather than
PGOAUTHDEBUG=UNSAFE # enable all the unsafe things
a developer can say
PGOAUTHDEBUG=call-count # only show me the call count. safe!
PGOAUTHDEBUG=UNSAFE:trace # print secrets, but don't allow HTTP
To avoid adding more build system scaffolding to libpq-oauth, implement
this entirely in a small private header. This unfortunately can't be
standalone, so it needs a headerscheck exception.
Author: Zsolt Parragi <zsolt.parragi@percona.com>
Co-authored-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Zsolt Parragi <zsolt.parragi@percona.com>
Discussion: https://postgr.es/m/CAOYmi%2B%3DfbZNJSkHVci%3DGpR8XPYObK%3DH%2B2ERRha0LDTS%2BifsWnw%40mail.gmail.com
Discussion: https://postgr.es/m/CAN4CZFMmDZMH56O9vb_g7vHqAk8ryWFxBMV19C39PFghENg8kA%40mail.gmail.com
Add a new GUC max_repack_replication_slots, which lets the user reserve
some additional replication slots for concurrent repack (and only
concurrent repack). With this, the user doesn't have to worry about
changing the max_replication_slots in order to cater for use of
concurrent repack.
(We still use the same pool of bgworkers though, but that's less
commonly a problem than slots.)
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Srinath Reddy Sadipiralla <srinath2133@gmail.com>
Discussion: https://postgr.es/m/202604012148.nnnmyxxrr6nh@alvherre.pgsql
If pg_stash_advice.persist = true, stashed advice will be written to
pg_stash_advice.tsv in the data directory, periodically and at
shutdown. On restart, stash modifications are locked out until this
file has been reloaded, but queries will not be, so there may be a
short window after startup during which previously-stashed advice is
not automatically applied.
Author: Robert Haas <rhaas@postgresql.org>
Co-authored-by: Lukas Fittl <lukas@fittl.com>
Discussion: https://postgr.es/m/CA+Tgmob87qsWa-VugofU6epuV0H5XjWZGMbQas4Q-ADKmvSyBg@mail.gmail.com
Peter Eisentraut