Commit 76b78721ca introduced two new columns in pg_stat_replication_slots
to improve monitoring of slot synchronization. One of these columns was
named slotsync_skip_at, which is inconsistent with the naming convention
used for similar columns in other system views.
Columns that store timestamps of the most recent event typically use the
'last_' in the column name (e.g., last_autovacuum, checksum_last_failure).
Renaming slotsync_skip_at to slotsync_last_skip aligns with this pattern,
making the purpose of the column clearer and improving overall consistency
across the views.
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Discussion: https://postgr.es/m/20251128091552.GB13635@p46.dedyn.io;lightning.p46.dedyn.io
Discussion: https://postgr.es/m/CAE9k0PkhfKrTEAsGz4DjOhEj1nQ+hbQVfvWUxNacD38ibW3a1g@mail.gmail.com
Some of the buildfarm members with some old gcc versions have been
complaining about an always-true test for a NULL pointer caused by a
combination of SOFT_ERROR_OCCURRED() and a local ErrorSaveContext
variable.
These warnings are taken care of by removing SOFT_ERROR_OCCURRED(),
switching to a direct variable check, like 56b1e88c80.
Oversights in e1405aa5e3 and 44eba8f06e.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1341064.1764895052@sss.pgh.pa.us
This commit adds the version information of a node initialized by
Cluster.pm, that may vary depending on the install_path given by the
test. The code was written so as the node information, that includes
the version number, was dumped before the version number was set.
This is particularly useful for the pg_upgrade TAP tests, that may mix
several versions for cross-version runs. The TAP infrastructure also
allows mixing nodes with different versions, so this information can be
useful for out-of-core tests.
Backpatch down to v15, where Cluster.pm and the pg_upgrade TAP tests
have been introduced.
Author: Potapov Alexander <a.potapov@postgrespro.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/e59bb-692c0a80-5-6f987180@170377126
Backpatch-through: 15
Adjust the prune_freeze_setup() parameter types of new_relfrozen_xid and
new_relmin_mxid to prevent misleading Coverity analysis.
heap_page_prune_and_freeze() compared these values against NULL when
passing them to prune_freeze_setup(), causing Coverity to assume they
could be NULL and flag a possible null-pointer dereference later, even
though it occurs inside a directly related conditional.
Reported-by: Coverity
Author: Melanie Plageman <melanieplageman@gmail.com>
The key is the first member of PrivateRefCountEntry, which has type
Buffer. This commit changes the key size from sizeof(int32) to
sizeof(Buffer). This appears to be an oversight in commit
4b4b680c3d, but it's of no consequence because Buffer has been a
signed 32-bit integer for a long time.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aS77DTpl0fOkIKSZ%40ip-10-97-1-34.eu-west-3.compute.internal
We were using SnapshotAny to do some index checks, but that's wrong and
causes spurious errors when used on indexes created by CREATE INDEX
CONCURRENTLY. Fix it to use an MVCC snapshot, and add a test for it.
This problem came in with commit 5ae2087202, which introduced
uniqueness check. Backpatch to 17.
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Backpatch-through: 17
Discussion: https://postgr.es/m/CANtu0ojmVd27fEhfpST7RG2KZvwkX=dMyKUqg0KM87FkOSdz8Q@mail.gmail.com
Currently, headerscheck and cpluspluscheck are very slow, and they
defeat use of ccache. This fixes that, and now they are much faster.
The problem was that the test files are created in a randomly-named
directory (`mktemp -d /tmp/$me.XXXXXX`), and this directory is
mentioned on the compiler command line, which is part of the cache
key.
The solution is to create the test files in the build directory. For
example, for src/include/storage/ipc.h, we generate
tmp_headerscheck_c/src_include_storage_ipc_h.c (or .cpp)
Now ccache works. (And it's also a bit easier to debug everything
with this naming.)
(The subdirectory is used to keep the cleanup trap simple.)
The observed speedup on Cirrus CI for headerscheck plus cpluspluscheck
is from about 1min 20s to only 20s. In local use, the speedups are
similar.
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/b49e74d4-3cf9-4d1c-9dce-09f75e55d026%40eisentraut.org
The assertion checking MyProcNumber used MaxBackends as the upper
bound, but the procInfos array is allocated with size
MaxBackends + NUM_AUXILIARY_PROCS. This inconsistency would cause
a false assertion failure if an auxiliary process calls WaitForLSN().
Author: Xuneng Zhou <xunengzhou@gmail.com>
In an upcoming patch more wait events will be added to the wait event
class (for buffer locking), making the current name too
specific. Alternatively we could introduce a dedicated wait event class for
those, but it seems somewhat confusing to have a BUFFERPIN and a BUFFER wait
event class.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
Commit 1eccb9315 added a test case that will cause a large number
of evaluations of a plpgsql function. With -DCLOBBER_CACHE_ALWAYS,
that takes an unreasonable amount of time (hours) because the
function's cache entries are repeatedly deleted and rebuilt.
That doesn't add any useful test coverage --- other test cases
already exercise plpgsql well enough --- and it's not part of what
this test intended to cover. We can get the same planner coverage,
if not more, by making the test directly invoke numeric_lt().
Reported-by: Tomas Vondra <tomas@vondra.me>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/baf1ae02-83bd-4f5d-872a-1d04f11a9073@vondra.me
With this commit, the next multixid's offset will always be set on the
offsets page, by the time that a backend might try to read it, so we
no longer need the waiting mechanism with the condition variable. In
other words, this eliminates "corner case 2" mentioned in the
comments.
The waiting mechanism was broken in a few scenarios:
- When nextMulti was advanced without WAL-logging the next
multixid. For example, if a later multixid was already assigned and
WAL-logged before the previous one was WAL-logged, and then the
server crashed. In that case the next offset would never be set in
the offsets SLRU, and a query trying to read it would get stuck
waiting for it. Same thing could happen if pg_resetwal was used to
forcibly advance nextMulti.
- In hot standby mode, a deadlock could happen where one backend waits
for the next multixid assignment record, but WAL replay is not
advancing because of a recovery conflict with the waiting backend.
The old TAP test used carefully placed injection points to exercise
the old waiting code, but now that the waiting code is gone, much of
the old test is no longer relevant. Rewrite the test to reproduce the
IPC/MultixactCreation hang after crash recovery instead, and to verify
that previously recorded multixids stay readable.
Backpatch to all supported versions. In back-branches, we still need
to be able to read WAL that was generated before this fix, so in the
back-branches this includes a hack to initialize the next offsets page
when replaying XLOG_MULTIXACT_CREATE_ID for the last multixid on a
page. On 'master', bump XLOG_PAGE_MAGIC instead to indicate that the
WAL is not compatible.
Author: Andrey Borodin <amborodin@acm.org>
Reviewed-by: Dmitry Yurichev <dsy.075@yandex.ru>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Ivan Bykov <i.bykov@modernsys.ru>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/172e5723-d65f-4eec-b512-14beacb326ce@yandex.ru
Backpatch-through: 14
These were removed in 5dee7a603f, but that was too optimistic, per
buildfarm member prion as reported by Tom Lane. Mea (Álvaro's) culpa.
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Discussion: https://postgr.es/m/570630.1764737028@sss.pgh.pa.us
The majority of cases already used "restartpoint" with just a few
instances of "restart point". Changing the latter spelling to the
former ensures consistency in the user facing documentation. Code
comments are not affected by this since it is not worth the churn
to change anything there.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/0F6E38D0-649F-4489-B2C1-43CD937E6636@yesql.se
The comment for the Pointer type said 'XXX Pointer arithmetic is done
with this, so it can't be void * under "true" ANSI compilers.'. This
has been fixed in the previous commit 756a436893. This now changes
the definition of the type from char * to void *, as envisaged by that
comment.
Extension code that relies on using Pointer for pointer arithmetic
will need to make changes similar to commit 756a436893, but those
changes would be backward compatible.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://www.postgresql.org/message-id/4154950a-47ae-4223-bd01-1235cc50e933%40eisentraut.org
The comment for the Pointer type says 'XXX Pointer arithmetic is done
with this, so it can't be void * under "true" ANSI compilers.'. This
fixes that. Change from Pointer to use char * explicitly where
pointer arithmetic is needed. This makes the meaning of the code
clearer locally and removes a dependency on the actual definition of
the Pointer type. (The definition of the Pointer type is not changed
in this commit.)
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://www.postgresql.org/message-id/4154950a-47ae-4223-bd01-1235cc50e933%40eisentraut.org
Both dsa_get_total_size() and dsa_get_total_size_from_handle() take
an exclusive lock just to read a variable. This commit reduces the
lock level to LW_SHARED in those functions.
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/aS8fMzWs9e8iHxk2%40nathan
amcheck incorrectly reported the following error if there were any
half-dead pages in the index:
ERROR: mismatch between parent key and child high key in index
"amchecktest_id_idx"
It's expected that a half-dead page does not have a downlink in the
parent level, so skip the test.
Reported-by: Konstantin Knizhnik <knizhnik@garret.ru>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Discussion: https://www.postgresql.org/message-id/33e39552-6a2a-46f3-8b34-3f9f8004451f@garret.ru
Backpatch-through: 14
To increase our test coverage in general, and because I will add onto
this in the next commit to also test amcheck with incomplete splits.
This is copied from the similar test we had for GIN indexes. B-tree's
incomplete splits work similarly to GIN's, so with small changes, the
same test works for B-tree too.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://www.postgresql.org/message-id/abd65090-5336-42cc-b768-2bdd66738404@iki.fi
Presently, this view reports NULL for the size of DSAs and dshash
tables because 1) the current backend might not be attached to them
and 2) the registry doesn't save the pointers to the dsa_area or
dshash_table in local memory. Also, the view doesn't show
partially-initialized entries to avoid ambiguity, since those
entries would report a NULL size as well.
This commit introduces a function that looks up the size of a DSA
given its handle (transiently attaching to the control segment if
needed) and teaches pg_dsm_registry_allocations to use it to show
the size of successfully-initialized DSA and dshash entries.
Furthermore, the view now reports partially-initialized entries
with a NULL size.
Reviewed-by: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/aSeEDeznAsHR1_YF%40nathan
This idea (implemented in commits and bc32a12e0d and 9e8fa05d34) of
using notices to detect that a session is sleeping was unreliable, so
simplify the concurrency controller session to just look at
pg_stat_activity for a process sleeping on the injection point we want
it to hit. This change allows us to remove a secondary injection point
and the alternative expected output files.
Reproduced by Alexander Lakhin following a report in buildfarm member
skink (which runs the server under valgrind).
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/3e302c96-cdd2-45ec-af84-03dbcdccde4a@gmail.com
When planning queries with ON CONFLICT on partitioned tables, the
indexes to consider as arbiters for each partition are determined based
on those found in the parent table. However, it's possible for an index
on a partition to be reindexed, and in that case, the auxiliary indexes
created on the partition must be considered as arbiters as well; failing
to do that may result in spurious "duplicate key" errors given
sufficient bad luck.
We fix that in this commit by matching every index that doesn't have a
parent to each initially-determined arbiter index. Every unparented
matching index is considered an additional arbiter index.
Closely related to the fixes in bc32a12e0d and 2bc7e886fc, and for
identical reasons, not backpatched (for now) even though it's a
longstanding issue.
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CANtu0ojXmqjmEzp-=aJSxjsdE76iAsRgHBoK0QtYHimb_mEfsg@mail.gmail.com
This removes some casts where the input already has the same type as
the type specified by the cast. Their presence could cause risks of
hiding actual type mismatches in the future or silently discarding
qualifiers. It also improves readability. Same kind of idea as
7f798aca1d and ef8fe69360. (This does not change all such
instances, but only those hand-picked by the author.)
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/aSQy2JawavlVlEB0%40ip-10-97-1-34.eu-west-3.compute.internal
Instead of complicated pointer arithmetic, overlay a uint32 array and
just access the array members. That's safe thanks to
XLogRecGetBlockData() returning a MAXALIGNed buffer.
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/aSQy2JawavlVlEB0%40ip-10-97-1-34.eu-west-3.compute.internal
One could do more work here to eliminate the Windows difference
described in the comment, but that can be a separate project. The
purpose of this change is to update comments that might confusingly
indicate that C99 is not required.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/170308e6-a7a3-4484-87b2-f960bb564afa%40eisentraut.org
This commit updates two functions that convert "timestamptz" to
"timestamp", and vice-versa, to use the soft error reporting rather than
a their own logic to do the same. These are now named as follows:
- timestamp2timestamptz_safe()
- timestamptz2timestamp_safe()
These functions were suffixed with "_opt_overflow", previously.
This shaves some code, as it is possible to detect how a timestamp[tz]
overflowed based on the returned value rather than a custom state. It
is optionally possible for the callers of these functions to rely on the
error generated internally by these functions, depending on the error
context.
Similar work has been done in d03668ea05 and 4246a977ba.
Reviewed-by: Amul Sul <sulamul@gmail.com>
Discussion: https://postgr.es/m/aS09YF2GmVXjAxbJ@paquier.xyz
The regex mechanism scans through the first "max_chr" character values
to cache character property ranges (isalpha, etc.). For single-byte
encodings, there's no sense in scanning beyond UCHAR_MAX; but for
UTF-8 it makes sense to cache higher code point values (though not all
of them; only up to MAX_SIMPLE_CHR).
Prior to 5a38104b36, the logic about how many character values to scan
was based on the pg_regex_strategy, which was dependent on the
provider. Commit 5a38104b36 preserved that logic exactly, allowing
different providers to define the "max_chr".
Now, change it to depend only on the encoding and whether
ctype_is_c. For this specific calculation, distinguishing between
providers creates more complexity than it's worth.
Discussion: https://postgr.es/m/450ceb6260cad30d7afdf155d991a9caafee7c0d.camel@j-davis.com
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
When REINDEX CONCURRENTLY is processing the index that supports a
constraint, there are periods during which multiple indexes match the
constraint index's definition. Those must all be included in the set of
inferred index for INSERT ON CONFLICT, in order to avoid spurious
"duplicate key" errors.
To fix, we set things up to match all indexes against attributes,
expressions and predicates of the constraint index, then return all
indexes that match those, rather than just the one constraint index.
This is more onerous than before, where we would just test the named
constraint for validity, but it's not more onerous than processing
"conventional" inference (where a list of attribute names etc is given).
This is closely related to the misbehaviors fixed by bc32a12e0d, for a
different situation. We're not backpatching this one for now either,
for the same reasons.
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CANtu0ojXmqjmEzp-=aJSxjsdE76iAsRgHBoK0QtYHimb_mEfsg@mail.gmail.com
This one is almost a textbook example of an aliasing violation, and it
is straightforward to fix, so clean it up. (The warning only shows up
if you remove the -fno-strict-aliasing option.) Also, move the code
after the error checking. Doesn't make a difference technically, but
it seems strange to do actions before errors are checked.
Reported-by: Tatsuo Ishii <ishii@postgresql.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/20240724.155525.366150353176322967.ishii%40postgresql.org
This split exists for most of the other RMGRs, and makes cleaner the
separation between the WAL code, the redo code and the record
description code (already in its own file) when it comes to the sequence
RMGR. The redo and masking routines are moved to a new file,
sequence_xlog.c. All the RMGR routines are now located in a new header,
sequence_xlog.h.
This separation is useful for a different patch related to sequences
that I have been working on, where it makes a refactoring of sequence.c
easier if its RMGR routines and its core routines are split.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/aSfTxIWjiXkTKh1E@paquier.xyz
This commit changes some functions related to the data types date and
timestamp to use the soft error reporting rather than a custom boolean
flag called "overflow", used to let the callers of these functions know
if an overflow happens.
This results in the removal of some boilerplate code, as it is possible
to rely on an error context rather than a custom state, with the
possibility to use the error generated inside the functions updated
here, if necessary.
These functions were suffixed with "_opt_overflow". They are now
renamed to use "_safe" as suffix.
This work is similar to 4246a977ba.
Author: Amul Sul <sulamul@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAAJ_b95HEmFyzHZfsdPquSHeswcopk8MCG1Q_vn4tVkZ+xxofw@mail.gmail.com
42473b3b3 added prosupport infrastructure to allow simplification of
Aggrefs during constant-folding. In some cases the context->root that's
given to eval_const_expressions_mutator() can be NULL. 42473b3b3 failed
to take that into account, which could result in a crash.
To fix, add a check and only call simplify_aggref() when the PlannerInfo
is set.
Author: David Rowley <dgrowleyml@gmail.com>
Reported-by: Birler, Altan <altan.birler@tum.de>
Discussion: https://postgr.es/m/132d4da23b844d5ab9e352d34096eab5@tum.de
We have some limited ability to detect redundant and contradictory
conditions involving an nbtree row comparison key following commits
f09816a0 and bd3f59fd: we can do so in simple cases involving IS NULL
and IS NOT NULL keys on a row compare key's first column. We can
likewise determine that a scan's qual is unsatisfiable given a row
compare whose first subkey's arg is NULL. Update obsolete comments that
claimed that we merely copied row compares into the output key array
"without any editorialization".
Also update another _bt_preprocess_keys header comment paragraph: add a
parenthetical remark that points out that preprocessing will generate a
skip array for the preceding example qual. That will ultimate lead to
preprocessing marking the example's lower-order y key required -- which
is exactly what the example supposes cannot happen. Keep the original
comment, though, since it accurately describes the mechanical rules that
determine which keys get marked required in the absence of skip arrays
(which can occasionally still matter). This fixes an oversight in
commit 92fe23d9, which added the nbtree skip scan optimization.
Author: Peter Geoghegan <pg@bowt.ie>
Backpatch-through: 18
Formerly, when updating an auto-updatable view, or a relation with
rules, if the original query had any data-modifying CTEs, the rewriter
would rewrite those CTEs multiple times as RewriteQuery() recursed
into the product queries. In most cases that was harmless, because
RewriteQuery() is mostly idempotent. However, if the CTE involved
updating an always-generated column, it would trigger an error because
any subsequent rewrite would appear to be attempting to assign a
non-default value to the always-generated column.
This could perhaps be fixed by attempting to make RewriteQuery() fully
idempotent, but that looks quite tricky to achieve, and would probably
be quite fragile, given that more generated-column-type features might
be added in the future.
Instead, fix by arranging for RewriteQuery() to rewrite each CTE
exactly once (by tracking the number of CTEs already rewritten as it
recurses). This has the advantage of being simpler and more efficient,
but it does make RewriteQuery() dependent on the order in which
rewriteRuleAction() joins the CTE lists from the original query and
the rule action, so care must be taken if that is ever changed.
Reported-by: Bernice Southey <bernice.southey@gmail.com>
Author: Bernice Southey <bernice.southey@gmail.com>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/CAEDh4nyD6MSH9bROhsOsuTqGAv_QceU_GDvN9WcHLtZTCYM1kA@mail.gmail.com
Backpatch-through: 14
Amit Kapila