186 Commits (6e8286f9a15325b6354a682a9106b4035dba0f17)

Author	SHA1	Message	Date
Tom Lane	fedfcf6650	Don't try to parallelize array_agg() on an anonymous record type. ... This doesn't work because record_recv requires the typmod that identifies the specific record type (in our session) and array_agg_deserialize has no convenient way to get that information. The result is an "input of anonymous composite types is not implemented" error. We could probably make this work if we had to, but it does not seem worth the trouble, given that it took this long to get a field report. Just shut off parallelization, as though record_recv didn't exist. Oversight in commit 16fd03e95. Back-patch to v16 where that came in. Reported-by: Kirill Zdornyy <kirill@dineserve.com> Diagnosed-by: Richard Guo <guofenglinux@gmail.com> Author: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: David Rowley <dgrowleyml@gmail.com> Discussion: https://postgr.es/m/atLI5Kce2ie1zcYjU0w_kjtVaxiYbYGTihrkLDmGZQnRDD4pnXukIATaABbnIj9pUnelC4ESvCXMm4HAyHg-v61XABaKpERj0A2IXzJZM7g=@dineserve.com Backpatch-through: 16	10 months ago
Bruce Momjian	50e6eb731d	Update copyright for 2025 ... Backpatch-through: 13	12 months ago
Peter Eisentraut	7f798aca1d	Remove useless casts to (void *) ... Many of them just seem to have been copied around for no real reason. Their presence causes (small) risks of hiding actual type mismatches or silently discarding qualifiers Discussion: https://www.postgresql.org/message-id/flat/461ea37c-8b58-43b4-9736-52884e862820@eisentraut.org	1 year ago
Tom Lane	77761ee5dd	Remove incorrect Assert. ... check_agglevels_and_constraints() asserted that if we find an aggregate function in an EXPR_KIND_FROM_SUBSELECT expression, the expression must be in a LATERAL subquery. Alexander Lakhin found a case where that's not so: because of the odd scoping rules for NEW/OLD within a rule, a reference to NEW/OLD could cause an aggregate to be considered top-level even though it's in an unmarked sub-select. The error message that would be thrown seems sufficiently on-point, so just remove the Assert. (Hence, this is not a bug for production builds.) This Assert was added by me in commit eaccfded9 (9.3 era). It looks like I put it in to cross-check that the new logic for detecting misplaced aggregates (using agglevelsup) caught the same cases that a previous check on p_lateral_active did. So there might have been some related misbehavior before eaccfded9 ... but that's very ancient history by now, so I didn't dig any deeper. Per bug #18608 from Alexander Lakhin. Back-patch to all supported branches. Discussion: https://postgr.es/m/18608-48de0717508ee429@postgresql.org	1 year ago
Richard Guo	f5050f795a	Mark expressions nullable by grouping sets ... When generating window_pathkeys, distinct_pathkeys, or sort_pathkeys, we failed to realize that the grouping/ordering expressions might be nullable by grouping sets. As a result, we may incorrectly deem that the PathKeys are redundant by EquivalenceClass processing and thus remove them from the pathkeys list. That would lead to wrong results in some cases. To fix this issue, we mark the grouping expressions nullable by grouping sets if that is the case. If the grouping expression is a Var or PlaceHolderVar or constructed from those, we can just add the RT index of the RTE_GROUP RTE to the existing nullingrels field(s); otherwise we have to add a PlaceHolderVar to carry on the nullingrel bit. However, we have to manually remove this nullingrel bit from expressions in various cases where these expressions are logically below the grouping step, such as when we generate groupClause pathkeys for grouping sets, or when we generate PathTarget for initial input to grouping nodes. Furthermore, in set_upper_references, the targetlist and quals of an Agg node should have nullingrels that include the effects of the grouping step, ie they will have nullingrels equal to the input Vars/PHVs' nullingrels plus the nullingrel bit that references the grouping RTE. In order to perform exact nullingrels matches, we also need to manually remove this nullingrel bit. Bump catversion because this changes the querytree produced by the parser. Thanks to Tom Lane for the idea to invent a new kind of RTE. Per reports from Geoff Winkless, Tobias Wendorff, Richard Guo from various threads. Author: Richard Guo Reviewed-by: Ashutosh Bapat, Sutou Kouhei Discussion: https://postgr.es/m/CAMbWs4_dp7e7oTwaiZeBX8+P1rXw4ThkZxh1QG81rhu9Z47VsQ@mail.gmail.com	1 year ago
Richard Guo	247dea89f7	Introduce an RTE for the grouping step ... If there are subqueries in the grouping expressions, each of these subqueries in the targetlist and HAVING clause is expanded into distinct SubPlan nodes. As a result, only one of these SubPlan nodes would be converted to reference to the grouping key column output by the Agg node; others would have to get evaluated afresh. This is not efficient, and with grouping sets this can cause wrong results issues in cases where they should go to NULL because they are from the wrong grouping set. Furthermore, during re-evaluation, these SubPlan nodes might use nulled column values from grouping sets, which is not correct. This issue is not limited to subqueries. For other types of expressions that are part of grouping items, if they are transformed into another form during preprocessing, they may fail to match lower target items. This can also lead to wrong results with grouping sets. To fix this issue, we introduce a new kind of RTE representing the output of the grouping step, with columns that are the Vars or expressions being grouped on. In the parser, we replace the grouping expressions in the targetlist and HAVING clause with Vars referencing this new RTE, so that the output of the parser directly expresses the semantic requirement that the grouping expressions be gotten from the grouping output rather than computed some other way. In the planner, we first preprocess all the columns of this new RTE and then replace any Vars in the targetlist and HAVING clause that reference this new RTE with the underlying grouping expressions, so that we will have only one instance of a SubPlan node for each subquery contained in the grouping expressions. Bump catversion because this changes the querytree produced by the parser. Thanks to Tom Lane for the idea to invent a new kind of RTE. Per reports from Geoff Winkless, Tobias Wendorff, Richard Guo from various threads. Author: Richard Guo Reviewed-by: Ashutosh Bapat, Sutou Kouhei Discussion: https://postgr.es/m/CAMbWs4_dp7e7oTwaiZeBX8+P1rXw4ThkZxh1QG81rhu9Z47VsQ@mail.gmail.com	1 year ago
Dean Rasheed	c649fa24a4	Add RETURNING support to MERGE. ... This allows a RETURNING clause to be appended to a MERGE query, to return values based on each row inserted, updated, or deleted. As with plain INSERT, UPDATE, and DELETE commands, the returned values are based on the new contents of the target table for INSERT and UPDATE actions, and on its old contents for DELETE actions. Values from the source relation may also be returned. As with INSERT/UPDATE/DELETE, the output of MERGE ... RETURNING may be used as the source relation for other operations such as WITH queries and COPY commands. Additionally, a special function merge_action() is provided, which returns 'INSERT', 'UPDATE', or 'DELETE', depending on the action executed for each row. The merge_action() function can be used anywhere in the RETURNING list, including in arbitrary expressions and subqueries, but it is an error to use it anywhere outside of a MERGE query's RETURNING list. Dean Rasheed, reviewed by Isaac Morland, Vik Fearing, Alvaro Herrera, Gurjeet Singh, Jian He, Jeff Davis, Merlin Moncure, Peter Eisentraut, and Wolfgang Walther. Discussion: http://postgr.es/m/CAEZATCWePEGQR5LBn-vD6SfeLZafzEm2Qy_L_Oky2=qw2w3Pzg@mail.gmail.com	2 years ago
Nathan Bossart	3b42bdb471	Use new overflow-safe integer comparison functions. ... Commit 6b80394781 introduced integer comparison functions designed to be as efficient as possible while avoiding overflow. This commit makes use of these functions in many of the in-tree qsort() comparators to help ensure transitivity. Many of these comparator functions should also see a small performance boost. Author: Mats Kindahl Reviewed-by: Andres Freund, Fabrízio de Royes Mello Discussion: https://postgr.es/m/CA%2B14426g2Wa9QuUpmakwPxXFWG_1FaY0AsApkvcTBy-YfS6uaw%40mail.gmail.com	2 years ago
Bruce Momjian	29275b1d17	Update copyright for 2024 ... Reported-by: Michael Paquier Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz Backpatch-through: 12	2 years ago
Tom Lane	3b0776fde5	Compute aggregate argument types correctly in transformAggregateCall(). ... transformAggregateCall() captures the datatypes of the aggregate's arguments immediately to construct the Aggref.aggargtypes list. This seems reasonable because the arguments have already been transformed --- but there is an edge case where they haven't been. Specifically, if we have an unknown-type literal in an ANY argument position, nothing will have been done with it earlier. But if we also have DISTINCT, then addTargetToGroupList() converts the literal to "text" type, resulting in the aggargtypes list not matching the actual runtime type of the argument. The end result is that the aggregate tries to interpret a "text" value as being of type "unknown", that is a zero-terminated C string. If the text value contains no zero bytes, this could result in disclosure of server memory following the text literal value. To fix, move the collection of the aggargtypes list to the end of transformAggregateCall(), after DISTINCT has been handled. This requires slightly more code, but not a great deal. Our thanks to Jingzhou Fu for reporting this problem. Security: CVE-2023-5868	2 years ago
Tom Lane	30dbdbe753	Fix failure to detect some cases of improperly-nested aggregates. ... check_agg_arguments_walker() supposed that it needn't descend into the arguments of a lower-level aggregate function, but this is just wrong in the presence of multiple levels of sub-select. The oversight would lead to executor failures on queries that should be rejected. (Prior to v11, they actually were rejected, thanks to a "redundant" execution-time check.) Per bug #17835 from Anban Company. Back-patch to all supported branches. Discussion: https://postgr.es/m/17835-4f29f3098b2d0ba4@postgresql.org	3 years ago
Tom Lane	2489d76c49	Make Vars be outer-join-aware. ... Traditionally we used the same Var struct to represent the value of a table column everywhere in parse and plan trees. This choice predates our support for SQL outer joins, and it's really a pretty bad idea with outer joins, because the Var's value can depend on where it is in the tree: it might go to NULL above an outer join. So expression nodes that are equal() per equalfuncs.c might not represent the same value, which is a huge correctness hazard for the planner. To improve this, decorate Var nodes with a bitmapset showing which outer joins (identified by RTE indexes) may have nulled them at the point in the parse tree where the Var appears. This allows us to trust that equal() Vars represent the same value. A certain amount of klugery is still needed to cope with cases where we re-order two outer joins, but it's possible to make it work without sacrificing that core principle. PlaceHolderVars receive similar decoration for the same reason. In the planner, we include these outer join bitmapsets into the relids that an expression is considered to depend on, and in consequence also add outer-join relids to the relids of join RelOptInfos. This allows us to correctly perceive whether an expression can be calculated above or below a particular outer join. This change affects FDWs that want to plan foreign joins. They *must* follow suit when labeling foreign joins in order to match with the core planner, but for many purposes (if postgres_fdw is any guide) they'd prefer to consider only base relations within the join. To support both requirements, redefine ForeignScan.fs_relids as base+OJ relids, and add a new field fs_base_relids that's set up by the core planner. Large though it is, this commit just does the minimum necessary to install the new mechanisms and get check-world passing again. Follow-up patches will perform some cleanup. (The README additions and comments mention some stuff that will appear in the follow-up.) Patch by me; thanks to Richard Guo for review. Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us	3 years ago
David Rowley	16fd03e956	Allow parallel aggregate on string_agg and array_agg ... This adds combine, serial and deserial functions for the array_agg() and string_agg() aggregate functions, thus allowing these aggregates to partake in partial aggregations. This allows both parallel aggregation to take place when these aggregates are present and also allows additional partition-wise aggregation plan shapes to include plans that require additional aggregation once the partially aggregated results from the partitions have been combined. Author: David Rowley Reviewed-by: Andres Freund, Tomas Vondra, Stephen Frost, Tom Lane Discussion: https://postgr.es/m/CAKJS1f9sx_6GTcvd6TMuZnNtCh0VhBzhX6FZqw17TgVFH-ga_A@mail.gmail.com	3 years ago
Bruce Momjian	c8e1ba736b	Update copyright for 2023 ... Backpatch-through: 11	3 years ago
David Rowley	ed1a88ddac	Allow window functions to adjust their frameOptions ... WindowFuncs such as row_number() don't care if it's called with ROWS UNBOUNDED PRECEDING AND CURRENT ROW or with RANGE UNBOUNDED PRECEDING AND CURRENT ROW. The latter is less efficient as the RANGE option requires that the executor check for peer rows, so using the ROW option instead would cause less overhead. Because RANGE is part of the default frame options for WindowClauses, it means WindowAgg is, by default, working much harder than it needs to for window functions where the ROWS / RANGE option has no effect on the window function's result. On a test query from the discussion thread, a performance improvement of 344% was seen by using ROWS instead of RANGE. Here we add a new support function node type to allow support functions to be called for window functions so that the most optimal version of the frame options can be set. The planner has been adjusted so that the frame options are changed only if all window functions sharing the same window clause agree on what the optimized frame options are. Here we give the ability for row_number(), rank(), dense_rank(), percent_rank(), cume_dist() and ntile() to alter their WindowClause's frameOptions. Reviewed-by: Vik Fearing, Erwin Brandstetter, Zhihong Yu Discussion: https://postgr.es/m/CAGHENJ7LBBszxS+SkWWFVnBmOT2oVsBhDMB1DFrgerCeYa_DyA@mail.gmail.com Discussion: https://postgr.es/m/CAApHDvohAKEtTXxq7Pc-ic2dKT8oZfbRKeEJP64M0B6+S88z+A@mail.gmail.com	3 years ago
Alvaro Herrera	7103ebb7aa	Add support for MERGE SQL command ... MERGE performs actions that modify rows in the target table using a source table or query. MERGE provides a single SQL statement that can conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise require multiple PL statements. For example, MERGE INTO target AS t USING source AS s ON t.tid = s.sid WHEN MATCHED AND t.balance > s.delta THEN UPDATE SET balance = t.balance - s.delta WHEN MATCHED THEN DELETE WHEN NOT MATCHED AND s.delta > 0 THEN INSERT VALUES (s.sid, s.delta) WHEN NOT MATCHED THEN DO NOTHING; MERGE works with regular tables, partitioned tables and inheritance hierarchies, including column and row security enforcement, as well as support for row and statement triggers and transition tables therein. MERGE is optimized for OLTP and is parameterizable, though also useful for large scale ETL/ELT. MERGE is not intended to be used in preference to existing single SQL commands for INSERT, UPDATE or DELETE since there is some overhead. MERGE can be used from PL/pgSQL. MERGE does not support targetting updatable views or foreign tables, and RETURNING clauses are not allowed either. These limitations are likely fixable with sufficient effort. Rewrite rules are also not supported, but it's not clear that we'd want to support them. Author: Pavan Deolasee <pavan.deolasee@gmail.com> Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Author: Amit Langote <amitlangote09@gmail.com> Author: Simon Riggs <simon.riggs@enterprisedb.com> Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com> Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions) Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions) Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions) Reviewed-by: Japin Li <japinli@hotmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com> Reviewed-by: Zhihong Yu <zyu@yugabyte.com> Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql	4 years ago
Bruce Momjian	27b77ecf9f	Update copyright for 2022 ... Backpatch-through: 10	4 years ago
Tom Lane	2313dda9d4	Fix check_agg_arguments' examination of aggregate FILTER clauses. ... Recursion into the FILTER clause was mis-implemented, such that a relevant Var or Aggref at the very top of the FILTER clause would be ignored. (Of course, that'd have to be a plain boolean Var or boolean-returning aggregate.) The consequence would be mis-identification of the correct semantic level of the aggregate, which could lead to not-per-spec query behavior. If the FILTER expression is an aggregate, this could also lead to failure to issue an expected "aggregate function calls cannot be nested" error, which would likely result in a core dump later on, since the planner and executor aren't expecting such cases to appear. The root cause is that commit b560ec1b0 blindly copied some code that assumed it's recursing into a List, and thus didn't examine the top-level node. To forestall questions about why this call doesn't look like the others, as well as possible future copy-and-paste mistakes, let's change all three check_agg_arguments_walker calls in check_agg_arguments, even though only the one for the filter clause is really broken. Per bug #17152 from Zhiyong Wu. This has been wrong since we implemented FILTER, so back-patch to all supported versions. (Testing suggests that pre-v11 branches manage to avoid crashing in the bad-Aggref case, thanks to "redundant" checks in ExecInitAgg. But I'm not sure how thorough that protection is, and anyway the wrong-behavior issue remains, so fix 9.6 and 10 too.) Discussion: https://postgr.es/m/17152-c7f906cc1a88e61b@postgresql.org	4 years ago
David Rowley	63b1af9437	Cleanup some aggregate code in the executor ... Here we alter the code that calls build_pertrans_for_aggref() so that the function no longer needs to special-case whether it's dealing with an aggtransfn or an aggcombinefn. This allows us to reuse the build_aggregate_transfn_expr() function and just get rid of the build_aggregate_combinefn_expr() completely. All of the special case code that was in build_pertrans_for_aggref() has been moved up to the calling functions. This saves about a dozen lines of code in nodeAgg.c and a few dozen more in parse_agg.c Also, rename a few variables in nodeAgg.c to try to make it more clear that we're working with either a aggtransfn or an aggcombinefn. Some of the old names would have you believe that we were always working with an aggtransfn. Discussion: https://postgr.es/m/CAApHDvptMQ9FmF0D67zC_w88yVnoNVR2+kkOQGUrCmdxWxLULQ@mail.gmail.com	5 years ago
David Rowley	8d29d45d9b	Fix assert failure in expand_grouping_sets ... linitial_node() fails in assert enabled builds if the given pointer is not of the specified type. Here the type is IntList. The code thought it should be expecting List, but it was wrong. In the existing tests which run this code the initial list element is always NIL. Since linitial_node() allows NULL, we didn't trigger any assert failures in the existing regression tests. There is still some discussion as to whether we need a few more tests in this area, but for now, since beta2 is looming, fix the bug first. Bug: #17067 Discussion: https://postgr.es/m/17067-665d50fa321f79e0@postgresql.org Reported-by: Yaoguang Chen	5 years ago
Tom Lane	def5b065ff	Initial pgindent and pgperltidy run for v14. ... Also "make reformat-dat-files". The only change worthy of note is that pgindent messed up the formatting of launcher.c's struct LogicalRepWorkerId, which led me to notice that that struct wasn't used at all anymore, so I just took it out.	5 years ago
Tomas Vondra	a4d75c86bf	Extended statistics on expressions ... Allow defining extended statistics on expressions, not just just on simple column references. With this commit, expressions are supported by all existing extended statistics kinds, improving the same types of estimates. A simple example may look like this: CREATE TABLE t (a int); CREATE STATISTICS s ON mod(a,10), mod(a,20) FROM t; ANALYZE t; The collected statistics are useful e.g. to estimate queries with those expressions in WHERE or GROUP BY clauses: SELECT * FROM t WHERE mod(a,10) = 0 AND mod(a,20) = 0; SELECT 1 FROM t GROUP BY mod(a,10), mod(a,20); This introduces new internal statistics kind 'e' (expressions) which is built automatically when the statistics object definition includes any expressions. This represents single-expression statistics, as if there was an expression index (but without the index maintenance overhead). The statistics is stored in pg_statistics_ext_data as an array of composite types, which is possible thanks to 79f6a942bd. CREATE STATISTICS allows building statistics on a single expression, in which case in which case it's not possible to specify statistics kinds. A new system view pg_stats_ext_exprs can be used to display expression statistics, similarly to pg_stats and pg_stats_ext views. ALTER TABLE ... ALTER COLUMN ... TYPE now treats indexes the same way it treats indexes, i.e. it drops and recreates the statistics. This means all statistics are reset, and we no longer try to preserve at least the functional dependencies. This should not be a major issue in practice, as the functional dependencies actually rely on per-column statistics, which were always reset anyway. Author: Tomas Vondra Reviewed-by: Justin Pryzby, Dean Rasheed, Zhihong Yu Discussion: https://postgr.es/m/ad7891d2-e90c-b446-9fe2-7419143847d7%40enterprisedb.com	5 years ago
Tomas Vondra	b822ae13ea	Use lfirst_int in cmp_list_len_contents_asc ... The function added in be45be9c33 is comparing integer lists (IntList) by length and contents, but there were two bugs. Firstly, it used intVal() to extract the value, but that's for Value nodes, not for extracting int values from IntList. Secondly, it called it directly on the ListCell, without doing lfirst(). So just do lfirst_int() instead. Interestingly enough, this did not cause any crashes on the buildfarm, but valgrind rightfully complained about it. Discussion: https://postgr.es/m/bf3805a8-d7d1-ae61-fece-761b7ff41ecc@postgresfriends.org	5 years ago
Tom Lane	1d581ce712	Fix misuse of foreach_delete_current(). ... Our coding convention requires this macro's result to be assigned back to the original List variable. In this usage, since the List could not become empty, there was no actual bug --- but some compilers warned about it. Oversight in be45be9c3. Discussion: https://postgr.es/m/35077b31-2d62-1e31-0e2e-ddb52d590b73@enterprisedb.com	5 years ago
Tomas Vondra	be45be9c33	Implement GROUP BY DISTINCT ... With grouping sets, it's possible that some of the grouping sets are duplicate. This is especially common with CUBE and ROLLUP clauses. For example GROUP BY CUBE (a,b), CUBE (b,c) is equivalent to GROUP BY GROUPING SETS ( (a, b, c), (a, b, c), (a, b, c), (a, b), (a, b), (a, b), (a), (a), (a), (c, a), (c, a), (c, a), (c), (b, c), (b), () ) Some of the grouping sets are calculated multiple times, which is mostly unnecessary. This commit implements a new GROUP BY DISTINCT feature, as defined in the SQL standard, which eliminates the duplicate sets. Author: Vik Fearing Reviewed-by: Erik Rijkers, Georgios Kokolatos, Tomas Vondra Discussion: https://postgr.es/m/bf3805a8-d7d1-ae61-fece-761b7ff41ecc@postgresfriends.org	5 years ago
Peter Eisentraut	3696a600e2	SEARCH and CYCLE clauses ... This adds the SQL standard feature that adds the SEARCH and CYCLE clauses to recursive queries to be able to do produce breadth- or depth-first search orders and detect cycles. These clauses can be rewritten into queries using existing syntax, and that is what this patch does in the rewriter. Reviewed-by: Vik Fearing <vik@postgresfriends.org> Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com> Discussion: https://www.postgresql.org/message-id/flat/db80ceee-6f97-9b4a-8ee8-3ba0c58e5be2@2ndquadrant.com	5 years ago
Bruce Momjian	ca3b37487b	Update copyright for 2021 ... Backpatch-through: 9.5	5 years ago
Tom Lane	56fe008996	Add for_each_from, to simplify loops starting from non-first list cells. ... We have a dozen or so places that need to iterate over all but the first cell of a List. Prior to v13 this was typically written as for_each_cell(lc, lnext(list_head(list))) Commit 1cff1b95a changed these to for_each_cell(lc, list, list_second_cell(list)) This patch introduces a new macro for_each_from() which expresses the start point as a list index, allowing these to be written as for_each_from(lc, list, 1) This is marginally more efficient, since ForEachState.i can be initialized directly instead of backing into it from a ListCell address. It also seems clearer and less typo-prone. Some of the remaining uses of for_each_cell() look like they could profitably be changed to for_each_from(), but here I confined myself to changing uses of list_second_cell(). Also, fix for_each_cell_setup() and for_both_cell_setup() to const-ify their arguments; that's a simple oversight in 1cff1b95a. Back-patch into v13, on the grounds that (1) the const-ification is a minor bug fix, and (2) it's better for back-patching purposes if we only have two ways to write these loops rather than three. In HEAD, also remove list_third_cell() and list_fourth_cell(), which were also introduced in 1cff1b95a, and are unused as of cc99baa43. It seems unlikely that any third-party code would have started to use them already; anyone who has can be directed to list_nth_cell instead. Discussion: https://postgr.es/m/CAApHDvpo1zj9KhEpU2cCRZfSM3Q6XGdhzuAS2v79PH7WJBkYVA@mail.gmail.com	5 years ago
Tom Lane	fa27dd40d5	Run pgindent with new pg_bsd_indent version 2.1.1. ... Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that it would misformat lines containing IsA() macros on the assumption that the IsA() call should be treated like a cast. This improves some other cases involving field/variable names that match typedefs, too. The only places that get worse are a couple of uses of the OpenSSL macro STACK_OF(); we'll gladly take that trade-off. Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql	6 years ago
Bruce Momjian	7559d8ebfa	Update copyrights for 2020 ... Backpatch-through: update all files in master, backpatch legal files through 9.4	6 years ago
Tom Lane	5ee190f8ec	Rationalize use of list_concat + list_copy combinations. ... In the wake of commit 1cff1b95a, the result of list_concat no longer shares the ListCells of the second input. Therefore, we can replace "list_concat(x, list_copy(y))" with just "list_concat(x, y)". To improve call sites that were list_copy'ing the first argument, or both arguments, invent "list_concat_copy()" which produces a new list sharing no ListCells with either input. (This is a bit faster than "list_concat(list_copy(x), y)" because it makes the result list the right size to start with.) In call sites that were not list_copy'ing the second argument, the new semantics mean that we are usually leaking the second List's storage, since typically there is no remaining pointer to it. We considered inventing another list_copy variant that would list_free the second input, but concluded that for most call sites it isn't worth worrying about, given the relative compactness of the new List representation. (Note that in cases where such leakage would happen, the old code already leaked the second List's header; so we're only discussing the size of the leak not whether there is one. I did adjust two or three places that had been troubling to free that header so that they manually free the whole second List.) Patch by me; thanks to David Rowley for review. Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us	6 years ago
Tom Lane	d97b714a21	Avoid using lcons and list_delete_first where it's easy to do so. ... Formerly, lcons was about the same speed as lappend, but with the new List implementation, that's not so; with a long List, data movement imposes an O(N) cost on lcons and list_delete_first, but not lappend. Hence, invent list_delete_last with semantics parallel to list_delete_first (but O(1) cost), and change various places to use lappend and list_delete_last where this can be done without much violence to the code logic. There are quite a few places that construct result lists using lcons not lappend. Some have semantic rationales for that; I added comments about it to a couple that didn't have them already. In many such places though, I think the coding is that way only because back in the dark ages lcons was faster than lappend. Hence, switch to lappend where this can be done without causing semantic changes. In ExecInitExprRec(), this results in aggregates and window functions that are in the same plan node being executed in a different order than before. Generally, the executions of such functions ought to be independent of each other, so this shouldn't result in visibly different query results. But if you push it, as one regression test case does, you can show that the order is different. The new order seems saner; it's closer to the order of the functions in the query text. And we never documented or promised anything about this, anyway. Also, in gistfinishsplit(), don't bother building a reverse-order list; it's easy now to iterate backwards through the original list. It'd be possible to go further towards removing uses of lcons and list_delete_first, but it'd require more extensive logic changes, and I'm not convinced it's worth it. Most of the remaining uses deal with queues that probably never get long enough to be worth sweating over. (Actually, I doubt that any of the changes in this patch will have measurable performance effects either. But better to have good examples than bad ones in the code base.) Patch by me, thanks to David Rowley and Daniel Gustafsson for review. Discussion: https://postgr.es/m/21272.1563318411@sss.pgh.pa.us	7 years ago
Tom Lane	569ed7f483	Redesign the API for list sorting (list_qsort becomes list_sort). ... In the wake of commit 1cff1b95a, the obvious way to sort a List is to apply qsort() directly to the array of ListCells. list_qsort was building an intermediate array of pointers-to-ListCells, which we no longer need, but getting rid of it forces an API change: the comparator functions need to do one less level of indirection. Since we're having to touch the callers anyway, let's do two additional changes: sort the given list in-place rather than making a copy (as none of the existing callers have any use for the copying behavior), and rename list_qsort to list_sort. It was argued that the old name exposes more about the implementation than it should, which I find pretty questionable, but a better reason to rename it is to be sure we get the attention of any external callers about the need to fix their comparator functions. While we're at it, change four existing callers of qsort() to use list_sort instead; previously, they all had local reinventions of list_qsort, ie build-an-array-from-a-List-and-qsort-it. (There are some other places where changing to list_sort perhaps would be worthwhile, but they're less obviously wins.) Discussion: https://postgr.es/m/29361.1563220190@sss.pgh.pa.us	7 years ago
Michael Paquier	0896ae561b	Fix inconsistencies and typos in the tree ... This is numbered take 7, and addresses a set of issues around: - Fixes for typos and incorrect reference names. - Removal of unneeded comments. - Removal of unreferenced functions and structures. - Fixes regarding variable name consistency. Author: Alexander Lakhin Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com	7 years ago
Tom Lane	1cff1b95ab	Represent Lists as expansible arrays, not chains of cons-cells. ... Originally, Postgres Lists were a more or less exact reimplementation of Lisp lists, which consist of chains of separately-allocated cons cells, each having a value and a next-cell link. We'd hacked that once before (commit d0b4399d8) to add a separate List header, but the data was still in cons cells. That makes some operations -- notably list_nth() -- O(N), and it's bulky because of the next-cell pointers and per-cell palloc overhead, and it's very cache-unfriendly if the cons cells end up scattered around rather than being adjacent. In this rewrite, we still have List headers, but the data is in a resizable array of values, with no next-cell links. Now we need at most two palloc's per List, and often only one, since we can allocate some values in the same palloc call as the List header. (Of course, extending an existing List may require repalloc's to enlarge the array. But this involves just O(log N) allocations not O(N).) Of course this is not without downsides. The key difficulty is that addition or deletion of a list entry may now cause other entries to move, which it did not before. For example, that breaks foreach() and sister macros, which historically used a pointer to the current cons-cell as loop state. We can repair those macros transparently by making their actual loop state be an integer list index; the exposed "ListCell *" pointer is no longer state carried across loop iterations, but is just a derived value. (In practice, modern compilers can optimize things back to having just one loop state value, at least for simple cases with inline loop bodies.) In principle, this is a semantics change for cases where the loop body inserts or deletes list entries ahead of the current loop index; but I found no such cases in the Postgres code. The change is not at all transparent for code that doesn't use foreach() but chases lists "by hand" using lnext(). The largest share of such code in the backend is in loops that were maintaining "prev" and "next" variables in addition to the current-cell pointer, in order to delete list cells efficiently using list_delete_cell(). However, we no longer need a previous-cell pointer to delete a list cell efficiently. Keeping a next-cell pointer doesn't work, as explained above, but we can improve matters by changing such code to use a regular foreach() loop and then using the new macro foreach_delete_current() to delete the current cell. (This macro knows how to update the associated foreach loop's state so that no cells will be missed in the traversal.) There remains a nontrivial risk of code assuming that a ListCell * pointer will remain good over an operation that could now move the list contents. To help catch such errors, list.c can be compiled with a new define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents whenever that could possibly happen. This makes list operations significantly more expensive so it's not normally turned on (though it is on by default if USE_VALGRIND is on). There are two notable API differences from the previous code: * lnext() now requires the List's header pointer in addition to the current cell's address. * list_delete_cell() no longer requires a previous-cell argument. These changes are somewhat unfortunate, but on the other hand code using either function needs inspection to see if it is assuming anything it shouldn't, so it's not all bad. Programmers should be aware of these significant performance changes: * list_nth() and related functions are now O(1); so there's no major access-speed difference between a list and an array. * Inserting or deleting a list element now takes time proportional to the distance to the end of the list, due to moving the array elements. (However, it typically *doesn't* require palloc or pfree, so except in long lists it's probably still faster than before.) Notably, lcons() used to be about the same cost as lappend(), but that's no longer true if the list is long. Code that uses lcons() and list_delete_first() to maintain a stack might usefully be rewritten to push and pop at the end of the list rather than the beginning. * There are now list_insert_nth...() and list_delete_nth...() functions that add or remove a list cell identified by index. These have the data-movement penalty explained above, but there's no search penalty. * list_concat() and variants now copy the second list's data into storage belonging to the first list, so there is no longer any sharing of cells between the input lists. The second argument is now declared "const List *" to reflect that it isn't changed. This patch just does the minimum needed to get the new implementation in place and fix bugs exposed by the regression tests. As suggested by the foregoing, there's a fair amount of followup work remaining to do. Also, the ENABLE_LIST_COMPAT macros are finally removed in this commit. Code using those should have been gone a dozen years ago. Patch by me; thanks to David Rowley, Jesper Pedersen, and others for review. Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us	7 years ago
Tom Lane	8255c7a5ee	Phase 2 pgindent run for v12. ... Switch to 2.1 version of pg_bsd_indent. This formats multiline function declarations "correctly", that is with additional lines of parameter declarations indented to match where the first line's left parenthesis is. Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com	7 years ago
Peter Eisentraut	fc22b6623b	Generated columns ... This is an SQL-standard feature that allows creating columns that are computed from expressions rather than assigned, similar to a view or materialized view but on a column basis. This implements one kind of generated column: stored (computed on write). Another kind, virtual (computed on read), is planned for the future, and some room is left for it. Reviewed-by: Michael Paquier <michael@paquier.xyz> Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com> Discussion: https://www.postgresql.org/message-id/flat/b151f851-4019-bdb1-699e-ebab07d2f40a@2ndquadrant.com	7 years ago
Tom Lane	f09346a9c6	Refactor planner's header files. ... Create a new header optimizer/optimizer.h, which exposes just the planner functions that can be used "at arm's length", without need to access Paths or the other planner-internal data structures defined in nodes/relation.h. This is intended to provide the whole planner API seen by most of the rest of the system; although FDWs still need to use additional stuff, and more thought is also needed about just what selfuncs.c should rely on. The main point of doing this now is to limit the amount of new #include baggage that will be needed by "planner support functions", which I expect to introduce later, and which will be in relevant datatype modules rather than anywhere near the planner. This commit just moves relevant declarations into optimizer.h from other header files (a couple of which go away because everything got moved), and adjusts #include lists to match. There's further cleanup that could be done if we want to decide that some stuff being exposed by optimizer.h doesn't belong in the planner at all, but I'll leave that for another day. Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us	7 years ago
Tom Lane	a1b8c41e99	Make some small planner API cleanups. ... Move a few very simple node-creation and node-type-testing functions from the planner's clauses.c to nodes/makefuncs and nodes/nodeFuncs. There's nothing planner-specific about them, as evidenced by the number of other places that were using them. While at it, rename and_clause() etc to is_andclause() etc, to clarify that they are node-type-testing functions not node-creation functions. And use "static inline" implementations for the shortest ones. Also, modify flatten_join_alias_vars() and some subsidiary functions to take a Query not a PlannerInfo to define the join structure that Vars should be translated according to. They were only using the "parse" field of the PlannerInfo anyway, so this just requires removing one level of indirection. The advantage is that now parse_agg.c can use flatten_join_alias_vars() without the horrid kluge of creating an incomplete PlannerInfo, which will allow that file to be decoupled from relation.h in a subsequent patch. Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us	7 years ago
Peter Eisentraut	7c079d7417	Allow generalized expression syntax for partition bounds ... Previously, only literals were allowed. This change allows general expressions, including functions calls, which are evaluated at the time the DDL command is executed. Besides offering some more functionality, it simplifies the parser structures and removes some inconsistencies in how the literals were handled. Author: Kyotaro Horiguchi, Tom Lane, Amit Langote Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> Discussion: https://www.postgresql.org/message-id/flat/9f88b5e0-6da2-5227-20d0-0d7012beaa1c@lab.ntt.co.jp/	7 years ago
Tomas Vondra	31f3817402	Allow COPY FROM to filter data using WHERE conditions ... Extends the COPY FROM command with a WHERE condition, which allows doing various types of filtering while importing the data (random sampling, condition on a data column, etc.). Until now such filtering required either preprocessing of the input data, or importing all data and then filtering in the database. COPY FROM ... WHERE is an easy-to-use and low-overhead alternative for most simple cases. Author: Surafel Temesgen Reviewed-by: Tomas Vondra, Masahiko Sawada, Lim Myungkyu Discussion: https://www.postgresql.org/message-id/flat/CALAY4q_DdpWDuB5-Zyi-oTtO2uSk8pmy+dupiRe3AvAc++1imA@mail.gmail.com	7 years ago
Bruce Momjian	97c39498e5	Update copyright for 2019 ... Backpatch-through: certain files through 9.4	7 years ago
Simon Riggs	08ea7a2291	Revert MERGE patch ... This reverts commits d204ef6377, 83454e3c2b and a few more commits thereafter (complete list at the end) related to MERGE feature. While the feature was fully functional, with sufficient test coverage and necessary documentation, it was felt that some parts of the executor and parse-analyzer can use a different design and it wasn't possible to do that in the available time. So it was decided to revert the patch for PG11 and retry again in the future. Thanks again to all reviewers and bug reporters. List of commits reverted, in reverse chronological order: f1464c5380 Improve parse representation for MERGE ddb4158579 MERGE syntax diagram correction 530e69e59b Allow cpluspluscheck to pass by renaming variable 01b88b4df5 MERGE minor errata 3af7b2b0d4 MERGE fix variable warning in non-assert builds a5d86181ec MERGE INSERT allows only one VALUES clause 4b2d44031f MERGE post-commit review 4923550c20 Tab completion for MERGE aa3faa3c7a WITH support in MERGE 83454e3c2b New files for MERGE d204ef6377 MERGE SQL Command following SQL:2016 Author: Pavan Deolasee Reviewed-by: Michael Paquier	8 years ago
Tom Lane	cefa387153	Merge catalog/pg_foo_fn.h headers back into pg_foo.h headers. ... Traditionally, include/catalog/pg_foo.h contains extern declarations for functions in backend/catalog/pg_foo.c, in addition to its function as the authoritative definition of the pg_foo catalog's rowtype. In some cases, we'd been forced to split out those extern declarations into separate pg_foo_fn.h headers so that the catalog definitions could be #include'd by frontend code. That problem is gone as of commit 9c0a0de4c, so let's undo the splits to make things less confusing. Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us	8 years ago
Simon Riggs	d204ef6377	MERGE SQL Command following SQL:2016 ... MERGE performs actions that modify rows in the target table using a source table or query. MERGE provides a single SQL statement that can conditionally INSERT/UPDATE/DELETE rows a task that would other require multiple PL statements. e.g. MERGE INTO target AS t USING source AS s ON t.tid = s.sid WHEN MATCHED AND t.balance > s.delta THEN UPDATE SET balance = t.balance - s.delta WHEN MATCHED THEN DELETE WHEN NOT MATCHED AND s.delta > 0 THEN INSERT VALUES (s.sid, s.delta) WHEN NOT MATCHED THEN DO NOTHING; MERGE works with regular and partitioned tables, including column and row security enforcement, as well as support for row, statement and transition triggers. MERGE is optimized for OLTP and is parameterizable, though also useful for large scale ETL/ELT. MERGE is not intended to be used in preference to existing single SQL commands for INSERT, UPDATE or DELETE since there is some overhead. MERGE can be used statically from PL/pgSQL. MERGE does not yet support inheritance, write rules, RETURNING clauses, updatable views or foreign tables. MERGE follows SQL Standard per the most recent SQL:2016. Includes full tests and documentation, including full isolation tests to demonstrate the concurrent behavior. This version written from scratch in 2017 by Simon Riggs, using docs and tests originally written in 2009. Later work from Pavan Deolasee has been both complex and deep, leaving the lead author credit now in his hands. Extensive discussion of concurrency from Peter Geoghegan, with thanks for the time and effort contributed. Various issues reported via sqlsmith by Andreas Seltenreich Authors: Pavan Deolasee, Simon Riggs Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com	8 years ago
Simon Riggs	7cf8a5c302	Revert "Modified files for MERGE" ... This reverts commit 354f13855e.	8 years ago
Simon Riggs	354f13855e	Modified files for MERGE	8 years ago
Tom Lane	65b1d76785	Fix oversight in CALL argument handling, and do some minor cleanup. ... CALL statements cannot support sub-SELECTs in the arguments of the called procedure, since they just use ExecEvalExpr to evaluate such arguments. Teach transformSubLink() to reject the case, as it already does for other contexts in which subqueries are not supported. In passing, s/EXPR_KIND_CALL/EXPR_KIND_CALL_ARGUMENT/ to make that enum symbol line up more closely with the phrasing of the error messages it is associated with. And fix someone's weak grasp of English grammar in the preceding EXPR_KIND_PARTITION_EXPRESSION addition. Also update an incorrect comment in resolve_unique_index_expr (possibly it was correct when written, but nowadays transformExpr definitely does reject SRFs here). Per report from Pavel Stehule --- but this resolves only one of the bugs he mentions. Discussion: https://postgr.es/m/CAFj8pRDxOwPPzpA8i+AQeDQFj7bhVw-dR2==rfWZ3zMGkm568Q@mail.gmail.com	8 years ago
Tom Lane	0a459cec96	Support all SQL:2011 options for window frame clauses. ... This patch adds the ability to use "RANGE offset PRECEDING/FOLLOWING" frame boundaries in window functions. We'd punted on that back in the original patch to add window functions, because it was not clear how to do it in a reasonably data-type-extensible fashion. That problem is resolved here by adding the ability for btree operator classes to provide an "in_range" support function that defines how to add or subtract the RANGE offset value. Factoring it this way also allows the operator class to avoid overflow problems near the ends of the datatype's range, if it wishes to expend effort on that. (In the committed patch, the integer opclasses handle that issue, but it did not seem worth the trouble to avoid overflow failures for datetime types.) The patch includes in_range support for the integer_ops opfamily (int2/int4/int8) as well as the standard datetime types. Support for other numeric types has been requested, but that seems like suitable material for a follow-on patch. In addition, the patch adds GROUPS mode which counts the offset in ORDER-BY peer groups rather than rows, and it adds the frame_exclusion options specified by SQL:2011. As far as I can see, we are now fully up to spec on window framing options. Existing behaviors remain unchanged, except that I changed the errcode for a couple of existing error reports to meet the SQL spec's expectation that negative "offset" values should be reported as SQLSTATE 22013. Internally and in relevant parts of the documentation, we now consistently use the terminology "offset PRECEDING/FOLLOWING" rather than "value PRECEDING/FOLLOWING", since the term "value" is confusingly vague. Oliver Ford, reviewed and whacked around some by me Discussion: https://postgr.es/m/CAGMVOdu9sivPAxbNN0X+q19Sfv9edEPv=HibOJhB14TJv_RCQg@mail.gmail.com	8 years ago
Bruce Momjian	9d4649ca49	Update copyright for 2018 ... Backpatch-through: certain files through 9.3	8 years ago