This commit updates two functions that convert "timestamptz" to
"timestamp", and vice-versa, to use the soft error reporting rather than
a their own logic to do the same. These are now named as follows:
- timestamp2timestamptz_safe()
- timestamptz2timestamp_safe()
These functions were suffixed with "_opt_overflow", previously.
This shaves some code, as it is possible to detect how a timestamp[tz]
overflowed based on the returned value rather than a custom state. It
is optionally possible for the callers of these functions to rely on the
error generated internally by these functions, depending on the error
context.
Similar work has been done in d03668ea05 and 4246a977ba.
Reviewed-by: Amul Sul <sulamul@gmail.com>
Discussion: https://postgr.es/m/aS09YF2GmVXjAxbJ@paquier.xyz
The regex mechanism scans through the first "max_chr" character values
to cache character property ranges (isalpha, etc.). For single-byte
encodings, there's no sense in scanning beyond UCHAR_MAX; but for
UTF-8 it makes sense to cache higher code point values (though not all
of them; only up to MAX_SIMPLE_CHR).
Prior to 5a38104b36, the logic about how many character values to scan
was based on the pg_regex_strategy, which was dependent on the
provider. Commit 5a38104b36 preserved that logic exactly, allowing
different providers to define the "max_chr".
Now, change it to depend only on the encoding and whether
ctype_is_c. For this specific calculation, distinguishing between
providers creates more complexity than it's worth.
Discussion: https://postgr.es/m/450ceb6260cad30d7afdf155d991a9caafee7c0d.camel@j-davis.com
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
When REINDEX CONCURRENTLY is processing the index that supports a
constraint, there are periods during which multiple indexes match the
constraint index's definition. Those must all be included in the set of
inferred index for INSERT ON CONFLICT, in order to avoid spurious
"duplicate key" errors.
To fix, we set things up to match all indexes against attributes,
expressions and predicates of the constraint index, then return all
indexes that match those, rather than just the one constraint index.
This is more onerous than before, where we would just test the named
constraint for validity, but it's not more onerous than processing
"conventional" inference (where a list of attribute names etc is given).
This is closely related to the misbehaviors fixed by bc32a12e0d, for a
different situation. We're not backpatching this one for now either,
for the same reasons.
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CANtu0ojXmqjmEzp-=aJSxjsdE76iAsRgHBoK0QtYHimb_mEfsg@mail.gmail.com
This one is almost a textbook example of an aliasing violation, and it
is straightforward to fix, so clean it up. (The warning only shows up
if you remove the -fno-strict-aliasing option.) Also, move the code
after the error checking. Doesn't make a difference technically, but
it seems strange to do actions before errors are checked.
Reported-by: Tatsuo Ishii <ishii@postgresql.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/20240724.155525.366150353176322967.ishii%40postgresql.org
This split exists for most of the other RMGRs, and makes cleaner the
separation between the WAL code, the redo code and the record
description code (already in its own file) when it comes to the sequence
RMGR. The redo and masking routines are moved to a new file,
sequence_xlog.c. All the RMGR routines are now located in a new header,
sequence_xlog.h.
This separation is useful for a different patch related to sequences
that I have been working on, where it makes a refactoring of sequence.c
easier if its RMGR routines and its core routines are split.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/aSfTxIWjiXkTKh1E@paquier.xyz
This commit changes some functions related to the data types date and
timestamp to use the soft error reporting rather than a custom boolean
flag called "overflow", used to let the callers of these functions know
if an overflow happens.
This results in the removal of some boilerplate code, as it is possible
to rely on an error context rather than a custom state, with the
possibility to use the error generated inside the functions updated
here, if necessary.
These functions were suffixed with "_opt_overflow". They are now
renamed to use "_safe" as suffix.
This work is similar to 4246a977ba.
Author: Amul Sul <sulamul@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAAJ_b95HEmFyzHZfsdPquSHeswcopk8MCG1Q_vn4tVkZ+xxofw@mail.gmail.com
42473b3b3 added prosupport infrastructure to allow simplification of
Aggrefs during constant-folding. In some cases the context->root that's
given to eval_const_expressions_mutator() can be NULL. 42473b3b3 failed
to take that into account, which could result in a crash.
To fix, add a check and only call simplify_aggref() when the PlannerInfo
is set.
Author: David Rowley <dgrowleyml@gmail.com>
Reported-by: Birler, Altan <altan.birler@tum.de>
Discussion: https://postgr.es/m/132d4da23b844d5ab9e352d34096eab5@tum.de
We have some limited ability to detect redundant and contradictory
conditions involving an nbtree row comparison key following commits
f09816a0 and bd3f59fd: we can do so in simple cases involving IS NULL
and IS NOT NULL keys on a row compare key's first column. We can
likewise determine that a scan's qual is unsatisfiable given a row
compare whose first subkey's arg is NULL. Update obsolete comments that
claimed that we merely copied row compares into the output key array
"without any editorialization".
Also update another _bt_preprocess_keys header comment paragraph: add a
parenthetical remark that points out that preprocessing will generate a
skip array for the preceding example qual. That will ultimate lead to
preprocessing marking the example's lower-order y key required -- which
is exactly what the example supposes cannot happen. Keep the original
comment, though, since it accurately describes the mechanical rules that
determine which keys get marked required in the absence of skip arrays
(which can occasionally still matter). This fixes an oversight in
commit 92fe23d9, which added the nbtree skip scan optimization.
Author: Peter Geoghegan <pg@bowt.ie>
Backpatch-through: 18
Formerly, when updating an auto-updatable view, or a relation with
rules, if the original query had any data-modifying CTEs, the rewriter
would rewrite those CTEs multiple times as RewriteQuery() recursed
into the product queries. In most cases that was harmless, because
RewriteQuery() is mostly idempotent. However, if the CTE involved
updating an always-generated column, it would trigger an error because
any subsequent rewrite would appear to be attempting to assign a
non-default value to the always-generated column.
This could perhaps be fixed by attempting to make RewriteQuery() fully
idempotent, but that looks quite tricky to achieve, and would probably
be quite fragile, given that more generated-column-type features might
be added in the future.
Instead, fix by arranging for RewriteQuery() to rewrite each CTE
exactly once (by tracking the number of CTEs already rewritten as it
recurses). This has the advantage of being simpler and more efficient,
but it does make RewriteQuery() dependent on the order in which
rewriteRuleAction() joins the CTE lists from the original query and
the rule action, so care must be taken if that is ever changed.
Reported-by: Bernice Southey <bernice.southey@gmail.com>
Author: Bernice Southey <bernice.southey@gmail.com>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/CAEDh4nyD6MSH9bROhsOsuTqGAv_QceU_GDvN9WcHLtZTCYM1kA@mail.gmail.com
Backpatch-through: 14
There was a pg_isblank() function that claimed to be a replacement for
the standard isblank() function, which was thought to be "not very
portable yet". We can now assume that it's portable (it's in C99).
But pg_isblank() actually diverged from the standard isblank() by also
accepting '\r', while the standard one only accepts space and tab.
This was added to support parsing pg_hba.conf under Windows. But the
hba parsing code now works completely differently and already handles
line endings before we get to pg_isblank(). The other user of
pg_isblank() is for ident protocol message parsing, which also handles
'\r' separately. So this behavior is now obsolete and confusing.
To improve clarity, I separated those concerns. The ident parsing now
gets its own function that hardcodes the whitespace characters
mentioned by the relevant RFC. pg_isblank() is now static in hba.c
and is a wrapper around the standard isblank(), with some extra logic
to ensure robust treatment of non-ASCII characters.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/170308e6-a7a3-4484-87b2-f960bb564afa%40eisentraut.org
Introduce a new column, slotsync_skip_reason, in the pg_replication_slots
view. This column records the reason why the last slot synchronization was
skipped. It is primarily relevant for logical replication slots on standby
servers where the 'synced' field is true. The value is NULL when
synchronization succeeds.
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Ashutosh Sharma <ashu.coek88@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAE9k0PkhfKrTEAsGz4DjOhEj1nQ+hbQVfvWUxNacD38ibW3a1g@mail.gmail.com
This commit introduces three new functions for marking shared buffers as
dirty by using the functions introduced in 9660906dbd69:
* pg_buffercache_mark_dirty() for one shared buffer.
- pg_buffercache_mark_dirt_relation() for all the shared buffers in a
relation.
* pg_buffercache_mark_dirty_all() for all the shared buffers in pool.
The "_all" and "_relation" flavors are designed to address the
inefficiency of repeatedly calling pg_buffercache_mark_dirty() for each
individual buffer, which can be time-consuming when dealing with with
large shared buffers pool.
These functions are intended as developer tools and are available only
to superusers. There is no need to bump the version of pg_buffercache,
4b203d499c having done this job in this release cycle.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aidar Imamov <a.imamov@postgrespro.ru>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ0h_YoSqqutxV6DES1RW8ig6wcA8CR9rJk358YRMxZFmw@mail.gmail.com
The solution used in 0ca3b1697 to determine the Parallel TID Range
Scan's start location was to modify the signature of
table_block_parallelscan_startblock_init() to allow the startblock
to be passed in as a parameter. This allows the scan limits to be
adjusted before that function is called so that the limits are picked up
when the parallel scan starts. The commit made it so the call to
table_block_parallelscan_startblock_init uses the HeapScanDesc's
rs_startblock to pass the startblock to the parallel scan. That all
works ok for Parallel TID Range scans as the HeapScanDesc rs_startblock
gets set by heap_setscanlimits(), but for Parallel Seq Scans, initscan()
does not initialize rs_startblock, and that results in passing an
uninitialized value to table_block_parallelscan_startblock_init() as
noted by the buildfarm member skink, running Valgrind.
To fix this issue, make it so initscan() sets the rs_startblock for
parallel scans unless we're doing a rescan. This makes it so
table_block_parallelscan_startblock_init() will be called with the
startblock set to InvalidBlockNumber, and that'll allow the syncscan
code to find the correct start location (when enabled). For Parallel
TID Range Scans, this InvalidBlockNumber value will be overwritten in
the call to heap_setscanlimits().
initscan() is a bit light on documentation on what's meant to get
initialized where for parallel scans. From what I can tell, it looks like
it just didn't matter prior to 0ca3b1697 that rs_startblock was left
uninitialized for parallel scans. To address the light documentation,
I've also added some comments to mention that the syncscan location for
parallel scans is figured out in table_block_parallelscan_startblock_init.
I've also taken the liberty to adjust the if/else if/else code in
initscan() to make it clearer which parts apply to parallel scans and
which parts are for the serial scans.
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAApHDvqALm+k7FyfdQdCw1yF_8HojvR61YRrNhwRQPE=zSmnQA@mail.gmail.com
This commit introduces new internal bufmgr routines for marking shared
buffers as dirty:
* MarkDirtyUnpinnedBuffer()
* MarkDirtyRelUnpinnedBuffers()
* MarkDirtyAllUnpinnedBuffers()
These functions provide an efficient mechanism to respectively mark one
buffer, all the buffers of a relation, or the entire shared buffer pool
as dirty, something that can be useful to force patterns for the
checkpointer. MarkDirtyUnpinnedBufferInternal(), an extra routine, is
used by these three, to mark as dirty an unpinned buffer.
They are intended as developer tools to manipulate buffer dirtiness in
bulk, and will be used in a follow-up commit.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aidar Imamov <a.imamov@postgrespro.ru>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ0h_YoSqqutxV6DES1RW8ig6wcA8CR9rJk358YRMxZFmw@mail.gmail.com
Normally, if a WHERE clause is implied by the predicate of a partial
index, we drop that clause from the set of quals used with the index,
since it's redundant to test it if we're scanning that index.
However, if it's a hash index (or any !amoptionalkey index), this
could result in dropping all available quals for the index's first
key, preventing us from generating an indexscan.
It's fair to question the practical usefulness of this case. Since
hash only supports equality quals, the situation could only arise
if the index's predicate is "WHERE indexkey = constant", implying
that the index contains only one hash value, which would make hash
a really poor choice of index type. However, perhaps there are
other !amoptionalkey index AMs out there with which such cases are
more plausible.
To fix, just don't filter the candidate indexquals this way if
the index is !amoptionalkey. That's a bit hokey because it may
result in testing quals we didn't need to test, but to do it
more accurately we'd have to redundantly identify which candidate
quals are actually usable with the index, something we don't know
at this early stage of planning. Doesn't seem worth the effort.
Reported-by: Sergei Glukhov <s.glukhov@postgrespro.ru>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/e200bf38-6b45-446a-83fd-48617211feff@postgrespro.ru
Backpatch-through: 14
The documentation for CREATE/ALTER PUBLICATION previously showed:
[ ONLY ] table_name [ * ] [ ( column_name [, ... ] ) ] [ WHERE ( expression ) ] [, ... ]
to indicate that the table/column specification could be repeated.
However, placing [, ... ] directly after a multi-part construct was
misleading and made it unclear which portion was repeatable.
This commit introduces a new term, table_and_columns, to represent:
[ ONLY ] table_name [ * ] [ ( column_name [, ... ] ) ] [ WHERE ( expression ) ]
and updates the synopsis to use:
table_and_columns [, ... ]
which clearly identifies the repeatable element.
Backpatched to v15, where the misleading syntax was introduced.
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAHut+PtsyvYL3KmA6C8f0ZpXQ=7FEqQtETVy-BOF+cm9WPvfMQ@mail.gmail.com
Backpatch-through: 15
Two of the isolation tests introduce by commit bc32a12e0d had a
problem under CATCACHE_FORCE_RELEASE, as evidenced by buildfarm member
prion. An injection point is hit ahead of what the test spec expects,
so a session goes to sleep and there's no one there to wait it up. Fix
in the simplest possible way, which is to conditionally wake the process
up if it's waiting. An alternative output file is necessary to cover
both cases.
This suggests a couple of possible improvements to the injection points
infrastructure: a conditional wakeup (doing nothing if no one is
sleeping, as opposed to throwing an error), as well as a way to attach
to a point in "deactivated" mode, activated later.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Discussion: https://postgr.es/m/202511261817.fyixgtt3hqdr@alvherre.pgsql
They were already using pg_attribute_aligned. This replaces that with
alignas and moves that into the required syntactic position. This
ends up making these three atomics implementations appear a bit more
consistent, but shouldn't change anything otherwise.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/46f05236-d4d4-4b4e-84d4-faa500f14691%40eisentraut.org
transformJsonFuncExpr() used exprType()/exprLocation() on the
possibly coerced path expression, which could be NULL when
coercion to jsonpath failed, leading to "cache lookup failed
for type 0" errors.
Preserve the original expression node so that type and location
in the "must be of type jsonpath" error are reported correctly.
Add regression tests to cover these cases.
Reported-by: Jian He <jian.universality@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/CACJufxHunVg81JMuNo8Yvv_hJD0DicgaVN2Wteu8aJbVJPBjZA@mail.gmail.com
Backpatch-through: 17
In v14, bb437f995 added support for scanning for ranges of TIDs using a
dedicated executor node for the purpose. Here, we allow these scans to
be parallelized. The range of blocks to scan is divvied up similarly to
how a Parallel Seq Scans does that, where 'chunks' of blocks are
allocated to each worker and the size of those chunks is slowly reduced
down to 1 block per worker by the time we're nearing the end of the
scan. Doing that means workers finish at roughly the same time.
Allowing TID Range Scans to be parallelized removes the dilemma from the
planner as to whether a Parallel Seq Scan will cost less than a
non-parallel TID Range Scan due to the CPU concurrency of the Seq Scan
(disk costs are not divided by the number of workers). It was possible
the planner could choose the Parallel Seq Scan which would result in
reading additional blocks during execution than the TID Scan would have.
Allowing Parallel TID Range Scans removes the trade-off the planner
makes when choosing between reduced CPU costs due to parallelism vs
additional I/O from the Parallel Seq Scan due to it scanning blocks from
outside of the required TID range. There is also, of course, the
traditional parallelism performance benefits to be gained as well, which
likely doesn't need to be explained here.
Author: Cary Huang <cary.huang@highgo.ca>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Steven Niu <niushiji@gmail.com>
Discussion: https://postgr.es/m/18f2c002a24.11bc2ab825151706.3749144144619388582@highgo.ca
This adds SupportRequestSimplifyAggref to allow pg_proc.prosupport
functions to receive an Aggref and allow them to determine if there is a
way that the Aggref call can be optimized.
Also added is a support function to allow transformation of COUNT(ANY)
into COUNT(*). This is possible to do when the given "ANY" cannot be
NULL and also that there are no ORDER BY / DISTINCT clauses within the
Aggref. This is a useful transformation to do as it is common that
people write COUNT(1), which until now has added unneeded overhead.
When counting a NOT NULL column. The overheads can be worse as that
might mean deforming more of the tuple, which for large fact tables may
be many columns in.
It may be possible to add prosupport functions for other aggregates. We
could consider if ORDER BY could be dropped for some calls, e.g. the
ORDER BY is quite useless in MAX(c ORDER BY c).
There is a little bit of passing fallout from adjusting
expr_is_nonnullable() to handle Const which results in a plan change in
the aggregates.out regression test. Previously, nothing was able to
determine that "One-Time Filter: (100 IS NOT NULL)" was always true,
therefore useless to include in the plan.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/CAApHDvqGcPTagXpKfH=CrmHBqALpziThJEDs_MrPqjKVeDF9wA@mail.gmail.com
If DSM registry entry initialization fails, backends could try to
use an uninitialized DSM segment, DSA, or dshash table (since the
entry is still added to the registry). To fix, restructure the
code so that the registry retries initialization as needed. This
commit also modifies pg_get_dsm_registry_allocations() to leave out
partially-initialized entries, as they shouldn't have any allocated
memory.
DSM registry entry initialization shouldn't fail often in practice,
but retrying was deemed better than leaving entries in a
permanently failed state (as was done by commit 1165a933aa, which
has since been reverted).
Suggested-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/E1vJHUk-006I7r-37%40gemulon.postgresql.org
Backpatch-through: 17
Previously, the caller needed to check ctype_is_c first for some
routines and not others. Now, the APIs consistently work, and the
caller can just check ctype_is_c for optimization purposes.
Discussion: https://postgr.es/m/450ceb6260cad30d7afdf155d991a9caafee7c0d.camel@j-davis.com
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
pgperltidy requires a particular version of perltidy, but the version
wasn't checked like how pgindent checks the underlying indent binary.
Fix by checking the version of perltidy and error out if an incorrect
version is used.
Author: Daniel Gustafsson <daniel@yesql.se>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/1209850.1764092152@sss.pgh.pa.us
This reverts commit 1165a933aa (and the corresponding commits on
the back-branches). In a follow-up commit, we'll teach the
registry to retry entry initialization instead of leaving it in a
permanently failed state.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/E1vJHUk-006I7r-37%40gemulon.postgresql.org
Backpatch-through: 17
Refactor the setup and planning phases of pruning and freezing into
helpers. This streamlines heap_page_prune_and_freeze() and makes it more
clear when the examination of tuples ends and page modifications begin.
No code change beyond what was required to extract the code into helper
functions.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/mhf4vkmh3j57zx7vuxp4jagtdzwhu3573pgfpmnjwqa6i6yj5y%40sy4ymcdtdklo
ssl_passphrase_command_supports_reload was not covered by the SSL
testsuite, and connection tests after unlocking secrets with the
passphrase was also missing. This adds test coverage for reloads
of passphrase commands as well as connection attempts which tests
the different codepaths for Windows and non-EXEC_BACKEND builds.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/5F301096-921A-427D-8EC1-EBAEC2A35082@yesql.se
There is no straightforward way to determine if a cluster is running
in EXEC_BACKEND mode or not, which is useful for tests to know. This
adds a GUC debug_exec_backend similar to debug_assertions which will
be true when the server is running in EXEC_BACKEND mode.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/5F301096-921A-427D-8EC1-EBAEC2A35082@yesql.se
When running on Windows (or EXEC_BACKEND) the SSL configuration will
be reloaded on each backend start, so the passphrase command will be
reloaded along with it. This implies that passphrase command reload
must be enabled on Windows for connections to work at all. Document
this since it wasn't mentioned explicitly, and will there add markup
for parameter value to match the rest of the docs.
Backpatch to all supported versions.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/5F301096-921A-427D-8EC1-EBAEC2A35082@yesql.se
Backpatch-through: 14
The code comment said, "It is expected that this routine will
eventually be replaced with the C99 hypot() function.", so let's do
that now.
This function is tested via the geometry regression test, so if it is
faulty on any platform, it will show up there.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/170308e6-a7a3-4484-87b2-f960bb564afa%40eisentraut.org
Response padding from the oauth_validator abuse tests was adding a
couple megabytes to the test logs. We don't need the buildfarm to hold
onto that, and we don't need to read it when debugging; truncate it.
Reported-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/202511251218.zfs4nu2qnh2m%40alvherre.pgsql
Backpatch-through: 18
The test failed because it assumed that a newly created logical
replication slot could be synced to the standby by the slotsync worker.
However, the presence of an existing physical slot caused the new logical
slot to use a non-latest xmin. On the standby, the DDL had already been
replayed, advancing xmin, which led to the slotsync worker failing to sync
the lagging logical slot.
To resolve this, we moved the slot sync statistics tests to run after the
tests that do not require the newly created slot to be sync-ready.
As per buildfarm.
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB14966FE0BFB6C212298BFFEDEF5D1A@OSCPR01MB14966.jpnprd01.prod.outlook.com
pg_dependencies is used as data type for the contents of dependencies
extended statistics. This new input function consumes the format that
has been established by e76defbcf0 for the output function of
pg_dependencies, enforcing some sanity checks for:
- Checks for the input object, which should be a one-dimension array
with correct attributes and values.
- The key names: "attributes", "dependency", "degree". All are
required, other key names are blocked.
- Value types for each key: "attributes" requires an array of integers,
"dependency" an attribute number, "degree" a float.
- List of attributes. In this case, it is possible that some
dependencies are not listed in the statistics data, as items with a
degree of 0 are discarded when building the statistics. This commit
includes checks for simple scenarios, like duplicated attributes, or
overlapping values between the list of "attributes" and the "dependency"
value. Even if the input function considers the input as valid, a value
still needs to be cross-checked with the attributes defined in a
statistics object at import.
- Based on the discussion, the checks on the values are loose, as there
is also an argument for potentially stats injection. For example,
"degree" should be defined in [0.0,1.0], but a check is not enforced.
This is required for a follow-up patch that aims to implement the import
of extended statistics. Some tests are added to check the code paths of
the JSON parser checking the shape of the pg_dependencies inputs, with
91% of code coverage reached. The tests are located in their own new
test file, for clarity.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Yuefei Shi <shiyuefei1004@gmail.com>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
pg_ndistinct is used as data type for the contents of ndistinct extended
statistics. This new input function consumes the format that has been
established by 1f927cce44 for the output function of pg_ndistinct,
enforcing some sanity checks for:
- Checks for the input object, which should be a one-dimension array
with correct attributes and values.
- The key names: "attributes", "ndistinct". Both are required, other
key names are blocked.
- Value types for each key: "attributes" requires an array of integers,
and "ndistinct" an integer.
- List of attributes. Note that this enforces a check so as an
attribute list has to be a subset of the longest attribute list found.
This does not enforce that a full group of attribute sets exist, based
on how the groups are generated when the ndistinct objects are
generated, making the list of ndistinct items a bit loose. Note a check
would still be required at import to see if the attributes listed match
with the attribute numbers set in the definition of a statistics object.
- Based on the discussion, the checks on the values are loose, as there
is also an argument for potentially stats injection. The relation and
attribute level stats follow the same line of argument for the values.
This is required for a follow-up patch that aims to implement the import
of extended statistics. Some tests are added to check the code paths of
the JSON parser checking the shape of the pg_ndistinct inputs, with 90%
of code coverage reached. The tests are located in their own new test
file, for clarity.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Yuefei Shi <shiyuefei1004@gmail.com>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
heap_page_prune_and_freeze() requires the caller to initialize
PruneFreezeParams->cutoffs so that the function can correctly evaluate
whether tuples should be frozen. This requirement previously existed
only in comments and was easy to miss, especially after “cutoffs” was
converted from a direct function parameter to a field of the newly
introduced PruneFreezeParams struct (added in 1937ed7062). Adding an
assert makes this requirement explicit and harder to violate.
Also, fix a minor typo while we're at it.
Author: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/0AC177F5-5E26-45EE-B273-357C51212AC5%40gmail.com
This bloats the regression log files for no reason.
Backpatch to 18; no further only because it fails to apply cleanly.
(It's just whitespace change that conflicts, but I don't think this
warrants more effort than this.)
Discussion: https://postgr.es/m/202511251218.zfs4nu2qnh2m@alvherre.pgsql
Previously, gen_guc_tables.pl would emit "Use of uninitialized value"
warnings if required fields were missing in guc_parameters.dat (for
example, when an integer or real GUC omitted the 'max' value). The
resulting error messages were unclear and did not identify which GUC
entry was problematic.
Add explicit validation of required fields depending on the parameter
type, and fail with a clear and specific message such as:
guc_parameters.dat:1909: error: entry "max_index_keys" of type "int" is missing required field "max"
No changes to generated guc_tables.c.
Author: Chao Li <lic@highgo.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/CAEoWx2%3DoP4LgHi771_OKhPPUS7B-CTqCs%3D%3DuQcNXWrwBoAm5Vg%40mail.gmail.com
The issue occurred because the replication slot was not released in the
slotsync worker when a slot synchronization cycle was skipped. This skip
happened because the required WAL was not received and flushed on the
standby server. As a result, in the next cycle, when attempting to acquire
the slot, an assertion failure was triggered.
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/CAA4eK1KMwYUYy=oAVHu9mam+vX50ixxfhO4_C=kgQC8VCQHEfw@mail.gmail.com
This patch adds two new columns to the pg_stat_replication_slots view:
slotsync_skip_count - the total number of times a slotsync operation was
skipped.
slotsync_skip_at - the timestamp of the most recent skip.
These additions provide better visibility into replication slot
synchronization behavior.
A future patch will introduce the slotsync_skip_reason column in
pg_replication_slots to capture the reason for skip.
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Ashutosh Sharma <ashu.coek88@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAE9k0PkhfKrTEAsGz4DjOhEj1nQ+hbQVfvWUxNacD38ibW3a1g@mail.gmail.com
This comment should probably have been moved to pg_locale_libc.c in
commit 66ac94cdc7 (2024), but upon closer examination it was already
completely obsolete then.
The first part of the comment has been obsolete since commit
85feb77aa0 (2017), which required that the system provides the
required wide-character functions.
The second part has been obsolete since commit e9931bfb75 (2024),
which eliminated code paths depending on the global LC_CTYPE setting.
Discussion: https://www.postgresql.org/message-id/flat/170308e6-a7a3-4484-87b2-f960bb564afa%40eisentraut.org
Michael Paquier