before checking ->has_scram_keys. MyProcPort is NULL in background
workers. So this could crash for example if a background worker
accessed a suitable configured foreign table.
Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/27b29a35-9b96-46a9-bc1a-914140869dac%40gmail.com
Tracking down the bugs that led to the addition of comb_multiplexer()
and drain_timer_events() was difficult, because an inefficient flow is
not visibly different from one that is working properly. To help
maintainers notice when something has gone wrong, track the number of
calls into the flow as part of debug mode, and print the total when the
flow finishes.
A new test makes sure the total count is less than 100. (We expect
something on the order of 10.) This isn't foolproof, but it is able to
catch several regressions in the logic of the prior two commits, and
future work to add TLS support to the oauth_validator test server should
strengthen it as well.
Backpatch-through: 18
Discussion: https://postgr.es/m/CAOYmi+nDZxJHaWj9_jRSyf8uMToCADAmOfJEggsKW-kY7aUwHA@mail.gmail.com
In a case similar to the previous commit, an expired timer can remain
permanently readable if Curl does not remove the timeout itself. Since
that removal isn't guaranteed to happen in real-world situations,
implement drain_timer_events() to reset the timer before calling into
drive_request().
Moving to drain_timer_events() happens to fix a logic bug in the
previous caller of timer_expired(), which treated an error condition as
if the timer were expired instead of bailing out.
The previous implementation of timer_expired() gave differing results
for epoll and kqueue if the timer was reset. (For epoll, a reset timer
was considered to be expired, and for kqueue it was not.) This didn't
previously cause problems, since timer_expired() was only called while
the timer was known to be set, but both implementations now use the
kqueue logic.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Backpatch-through: 18
Discussion: https://postgr.es/m/CAOYmi+nDZxJHaWj9_jRSyf8uMToCADAmOfJEggsKW-kY7aUwHA@mail.gmail.com
If Curl needs to switch the direction of a socket's registration (e.g.
from CURL_POLL_IN to CURL_POLL_OUT), it expects the old registration to
be discarded. For epoll, this happened via EPOLL_CTL_MOD, but for
kqueue, the old registration would remain if it was not explicitly
removed by Curl.
Explicitly remove the opposite-direction event during registrations. (If
that event doesn't exist, we'll just get an ENOENT, which will be
ignored by the same code that handles CURL_POLL_REMOVE.) A few
assertions are also added to strengthen the relationship between the
number of events added, the number of events pulled off the queue, and
the lengths of the kevent arrays.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Backpatch-through: 18
Discussion: https://postgr.es/m/CAOYmi+nDZxJHaWj9_jRSyf8uMToCADAmOfJEggsKW-kY7aUwHA@mail.gmail.com
If a socket is added to the kqueue, becomes readable/writable, and
subsequently becomes non-readable/writable again, the kqueue itself will
remain readable until either the socket registration is removed, or the
stale event is cleared via a call to kevent().
In many simple cases, Curl itself will remove the socket registration
quickly, but in real-world usage, this is not guaranteed to happen. The
kqueue can then remain stuck in a permanently readable state until the
request ends, which results in pointless wakeups for the client and
wasted CPU time.
Implement comb_multiplexer() to call kevent() and unstick any stale
events that would cause unnecessary callbacks. This is called right
after drive_request(), before we return control to the client to wait.
Suggested-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Backpatch-through: 18
Discussion: https://postgr.es/m/CAOYmi+nDZxJHaWj9_jRSyf8uMToCADAmOfJEggsKW-kY7aUwHA@mail.gmail.com
The code used
return (Selectivity) 0.0;
where
PG_RETURN_FLOAT8(0.0);
would be correct.
On 64-bit systems, these are pretty much equivalent, but on 32-bit
systems, PG_RETURN_FLOAT8() correctly produces a pointer, but the old
wrong code would return a null pointer, possibly leading to a crash
elsewhere.
We think this code is actually not reachable because bqarr_in won't
accept an empty query, and there is no other function that will
create query_int values. But better be safe and not let such
incorrect code lie around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8246d7ff-f4b7-4363-913e-827dadfeb145%40eisentraut.org
This function is called from ATExecAttachPartition/ATExecAddInherit,
which prevent tables with row-level triggers with transition tables from
becoming partitions or inheritance children, to check if there is such a
trigger on the given table, but failed to check if a found trigger is
row-level, causing the caller functions to needlessly prevent a table
with only a statement-level trigger with transition tables from becoming
a partition or inheritance child. Repair.
Oversight in commit 501ed02cf.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAPmGK167mXzwzzmJ_0YZ3EZrbwiCxtM1vogH_8drqsE6PtxRYw%40mail.gmail.com
Backpatch-through: 13
Previously, pg_dump --filter could misinterpret invalid object types
in the filter file as valid ones. For example, the invalid object type
"table-data" (likely a typo for the valid "table_data") could be
mistakenly recognized as "table", causing pg_dump to succeed
when it should have failed.
This happened because pg_dump identified keywords as sequences of
ASCII alphabetic characters, treating non-alphabetic characters
(like hyphens) as keyword boundaries. As a result, "table-data" was
parsed as "table".
To fix this, pg_dump --filter now treats keywords as strings of
non-whitespace characters, ensuring invalid types like "table-data"
are correctly rejected.
Back-patch to v17, where the --filter option was introduced.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Srinath Reddy <srinath2133@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAHGQGwFzPKUwiV5C-NLBqz1oK1+z9K8cgrF+LcxFem-p3_Ftug@mail.gmail.com
Backpatch-through: 17
Commit 9e6104c66 disallowed transition tables on foreign tables, but
failed to account for cases where a foreign table is a child table of a
partitioned/inherited table on which transition tables exist, leading to
incorrect transition tuples collected from such foreign tables for
queries on the parent table triggering transition capture. This
occurred not only for inherited UPDATE/DELETE but for partitioned INSERT
later supported by commit 3d956d956, which should have handled it at
least for the INSERT case, but didn't.
To fix, modify ExecAR*Triggers to throw an error if the given relation
is a foreign table requesting transition capture. Also, this commit
fixes make_modifytable so that in case of an inherited UPDATE/DELETE
triggering transition capture, FDWs choose normal operations to modify
child foreign tables, not DirectModify; which is needed because they
would otherwise skip the calls to ExecAR*Triggers at execution, causing
unexpected behavior.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14QJYikKzBDCe3jMbpGENnQ7popFmbEgm-XTNuk55oyHg%40mail.gmail.com
Backpatch-through: 13
Dropping twice a pgstats entry should not happen, and the error report
generated was missing the "generation" counter (tracking when an entry
is reused) that has been added in 818119afcc.
Like d92573adcb, backpatch down to v15 where this information is
useful to have, to gather more information from instances where the
problem shows up. A report has shown that this error path has been
reached on a standby based on 17.3, for a relation stats entry and an
OID close to wraparound.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/CAN4RuQvYth942J2+FcLmJKgdpq6fE5eqyFvb_PuskxF2eL=Wzg@mail.gmail.com
Backpatch-through: 15
libpq-oauth was missing from the installed_targets list, so
$ ninja clean && ninja install-quiet
failed with the error message
ERROR: File 'src/interfaces/libpq-oauth/libpq-oauth.a' could not be found
It seems a little odd to have to tell Meson what's missing, since it
clearly knows how to build that file during regular installation. But
the "quiet" variant we've created must use --no-rebuild, to avoid
spawning concurrent ninja processes that would step on each other.
Reported-by: Andres Freund <andres@anarazel.de>
Backpatch-through: 18
Discussion: https://postgr.es/m/hbpqdwxkfnqijaxzgdpvdtp57s7gwxa5d6sbxswovjrournlk6%404jnb2gzan4em
Although the "Floating-Point Types" section says that "float" data
type is taken to mean "double precision", this information was not
reflected in the data type table that lists all data type aliases.
Reported-by: alexander.kjall@hafslund.no
Author: Euler Taveira <euler@eulerto.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/175456294638.800.12038559679827947313@wrigleys.postgresql.org
Backpatch-through: 13
Small touch-up on commits 25505082f0 and 50fd428b2b. Fix the
formatting of the example messages in the documentation and adjust the
wording to match the code.
Use Min(NBuffers, MAX_CHECKPOINT_REQUESTS) instead of NBuffers in
CheckpointerShmemSize() to match the actual array size limit set in
CheckpointerShmemInit(). This prevents wasting shared memory when
NBuffers > MAX_CHECKPOINT_REQUESTS. Also, fix the comment.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1439188.1754506714%40sss.pgh.pa.us
Author: Xuneng Zhou <xunengzhou@gmail.com>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Recent ICU versions have added U_SHOW_CPLUSPLUS_HEADER_API, and we need
to set this to zero as well to hide the ICU C++ APIs from pg_locale.h
Per discussion, we want cpluspluscheck to work cleanly in backbranches,
so backpatch both this and its predecessor commit ed26c4e25a to all
supported versions.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1115793.1754414782%40sss.pgh.pa.us
Backpatch-through: 13
Commit d85ce012f9 has added some new error handling code to
date_trunc() of timestamp, timestamptz, and interval with infinite
values.
However, the new test cases added by that commit did not actually test
all of the new code, missing coverage for the following cases:
1) For timestamp without time zone:
1-1) infinite value with valid unit
1-2) infinite value with unsupported unit
1-3) finite value with unsupported unit, for a code path older than
d85ce012f9.
2) For timestamp with time zone, without a time zone specified for the
truncation:
2-1) infinite value with valid unit
2-2) infinite value with unsupported unit
2-3) finite value with unsupported unit, for a code path older than
d85ce012f9.
3) For timestamp with time zone, with a time zone specified for the
truncation:
3-1) infinite value with valid unit.
3-2) infinite value with unsupported unit.
This commit also provides coverage for the bug fixed in 2242b26ce4,
through cases 2-1) and 3-1), when using an infinite value with a valid
unit, with[out] the optional time zone parameter used for the
truncation.
Author: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/2d320b6f-b4af-4fbc-9eec-5d0fa15d187b@eisentraut.org
Discussion: https://postgr.es/m/4bf60a84-2862-4a53-acd5-8eddf134a60e@eisentraut.org
Backpatch-through: 18
The code used a PG_RETURN_TIMESTAMPTZ() where the return type is
TimestampTz and not a Datum.
On 64-bit systems, there is no effect since this just ends up casting
64-bit integers back and forth. On 32-bit systems, timestamptz is
pass-by-reference. PG_RETURN_TIMESTAMPTZ() allocates new memory and
returns the address, meaning that the caller could interpret this as a
timestamp value.
The effect is using "date_trunc(..., 'infinity'::timestamptz) will
return random values (instead of the correct return value 'infinity').
Bug introduced in commit d85ce012f9.
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2d320b6f-b4af-4fbc-9eec-5d0fa15d187b@eisentraut.org
Discussion: https://postgr.es/m/4bf60a84-2862-4a53-acd5-8eddf134a60e@eisentraut.org
Backpatch-through: 18
These were introduced (commit efdc7d7475) at the same time as we were
moving to using the standard inttypes.h format macros (commit
a0ed19e0a9). It doesn't seem useful to keep a new already-deprecated
interface like this with only a few users, so remove the new symbols
again and have the callers use PRIx64.
(Also, INT64_HEX_FORMAT was kind of a misnomer, since hex formats all
use unsigned types.)
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/0ac47b5d-e5ab-4cac-98a7-bdee0e2831e4%40eisentraut.org
ALTER TABLE ... SET EXPRESSION AS removes statistics for the target column,
so running ANALYZE afterward is recommended. But this was previously not
documented, even though a similar recommendation exists for
ALTER TABLE ... SET DATA TYPE, which also clears the column's statistics.
This commit updates the documentation to include the ANALYZE recommendation
for SET EXPRESSION AS.
Since v18, virtual generated columns are supported, and these columns never
have statistics. Therefore, ANALYZE is not needed after SET DATA TYPE or
SET EXPRESSION AS when used on virtual generated columns. This commit also
updates the documentation to clarify that ANALYZE is unnecessary in such cases.
Back-patch the ANALYZE recommendation for SET EXPRESSION AS to v17
where the feature was introduced, and the note about virtual generated
columns to v18 where those columns were added.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/20250804151418.0cf365bd2855d606763443fe@sraoss.co.jp
Backpatch-through: 17
The result of "DirectFunctionCall1(numeric_float8, d)" is already in
Datum form, but the code was incorrectly applying PG_RETURN_FLOAT8()
to it. On machines where float8 is pass-by-reference, this would
result in complete garbage, since an unpredictable pointer value
would be treated as an integer and then converted to float. It's not
entirely clear how much of a problem would ensue on 64-bit hardware,
but certainly interpreting a float8 bitpattern as uint64 and then
converting that to float isn't the intended behavior.
As luck would have it, even the complete-garbage case doesn't break
BRIN indexes, since the results are only used to make choices about
how to merge values into ranges: at worst, we'd make poor choices
resulting in an inefficient index. Doubtless that explains the lack
of field complaints. However, users with BRIN indexes that use the
numeric_minmax_multi_ops opclass may wish to reindex in hopes of
making their indexes more efficient.
Author: Peter Eisentraut <peter@eisentraut.org>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2093712.1753983215@sss.pgh.pa.us
Backpatch-through: 14
During CREATE DATABASE, if changing the locale provider, require that
a new locale is specified rather than trying to reinterpret the
template's locale using the new provider.
This only affects the behavior when the template uses the builtin
provider and CREATE DATABASE specifies the ICU provider without
specifying the locale. Previously, that may have succeeded due to
loose validation by ICU, whereas now that will cause an error. Because
it can cause an error, backport only to unreleased versions.
Discussion: https://postgr.es/m/5038b33a6dc639009f4b3d43fa6ae0c5ba9e04f7.camel@j-davis.com
Backpatch-through: 18
Previously, specifying the publication option 'publish_generated_columns'
without an explicit value would incorrectly default to 'stored', which is
not the intended behavior.
This patch fixes the issue by raising an ERROR when no value is provided
for 'publish_generated_columns', ensuring that users must explicitly
specify a valid option.
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Backpatch-through: 18, where it was introduced
Discussion: https://postgr.es/m/CAHut+PsCUCWiEKmB10DxhoPfXbF6jw5RD9ib2LuaQeA_XraW7w@mail.gmail.com
Import usleep, which, due to an oversight in oversight in commit
48796a98d5 was used but not imported.
Correct the comparison string used in two logfile checks. Previously, it
was incorrect and thus the test could never have failed.
Also wordsmith a comment to make it clear when hot_standby_feedback is
meant to be on during the test scenarios.
Reported-by: Melanie Plageman <melanieplageman@gmail.com>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_YO2mEm%3DZWZKPjTMU%3DgW5Y83_KMi_1cr51JwavH0ctd7w%40mail.gmail.com
Backpatch-through: 16
Previously, enabling sync_replication_slots while wal_level was not set
to logical could cause the server to shut down. This was because
the postmaster performed a configuration check before launching
the slot synchronization worker and raised an ERROR if the settings
were incompatible. Since ERROR is treated as FATAL in the postmaster,
this resulted in the entire server shutting down unexpectedly.
This commit changes the postmaster to log that message with a LOG-level
instead of raising an ERROR, allowing the server to continue running
even with the misconfiguration.
Back-patch to v17, where slot synchronization was introduced.
Reported-by: Hugo DUBOIS <hdubois@scaleway.com>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Hugo DUBOIS <hdubois@scaleway.com>
Reviewed-by: Shveta Malik <shveta.malik@gmail.com>
Discussion: https://postgr.es/m/CAH0PTU_pc3oHi__XESF9ZigCyzai1Mo3LsOdFyQA4aUDkm01RA@mail.gmail.com
Backpatch-through: 17
It's possible to use a CHECK (col IS NOT NULL) constraint to skip
scanning a table for nulls when adding a NOT NULL constraint on the same
column. However, if the CHECK constraint is dropped on the same command
that the NOT NULL is added, this fails, i.e., makes the NOT NULL addition
slow. The best we can do about it at this stage is to document this so
that users aren't taken by surprise.
(In Postgres 18 you can directly add the NOT NULL constraint as NOT
VALID instead, so there's no longer much use for the CHECK constraint,
therefore no point in building mechanism to support the case better.)
Reported-by: Andrew <psy2000usa@yahoo.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/175385113607.786.16774570234342968908@wrigleys.postgresql.org
Previously, when running pgbench in pipeline mode with a custom script
that triggered retriable errors (e.g., serialization errors),
an assertion failure could occur:
Assertion failed: (res == ((void*)0)), function discardUntilSync, file pgbench.c, line 3515.
The root cause was that pgbench incorrectly assumed only a single
pipeline sync message would be received at the end. In reality,
multiple pipeline sync messages can be sent and must be handled properly.
This commit fixes the issue by updating pgbench to correctly process
multiple pipeline sync messages, preventing the assertion failure.
Back-patch to v15, where the bug was introduced.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Discussion: https://postgr.es/m/CAHGQGwFAX56Tfx+1ppo431OSWiLLuW72HaGzZ39NkLkop6bMzQ@mail.gmail.com
Backpatch-through: 15
It was not very clear that the triggers are only allowed on plain tables
(not foreign tables). Also, rephrase the documentation for better
readability.
Follow up to commit 9e6104c66.
Reported-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAPmGK16XBs9ptNr8Lk4f-tJZogf6y-Prz%3D8yhvJbb_4dpsc3mQ%40mail.gmail.com
Backpatch-through: 13
In ReorderBufferProcessTXN(), used to send the data of a transaction to
an output plugin, INSERT ON CONFLICT changes (INTERNAL_SPEC_INSERT) are
delayed until a confirmation record arrives (INTERNAL_SPEC_CONFIRM),
updating the change being processed.
8c58624df4 has added an extra step after processing a change to update
the progress of the transaction, by calling the callback
update_progress_txn() based on the LSN stored in a change after a
threshold of CHANGES_THRESHOLD (100) is reached. This logic has missed
the fact that for an INSERT ON CONFLICT change the data is freed once
processed, hence update_progress_txn() could be called pointing to a LSN
value that's already been freed. This could result in random crashes,
depending on the workload.
Per discussion, this issue is fixed by reusing in update_progress_txn()
the LSN from the change processed found at the beginning of the loop,
meaning that for a INTERNAL_SPEC_CONFIRM change the progress is updated
using the LSN of the INTERNAL_SPEC_CONFIRM change, and not the LSN from
its INTERNAL_SPEC_INSERT change. This is actually more correct, as we
want to update the progress to point to the INTERNAL_SPEC_CONFIRM
change.
Masahiko Sawada has found a nice trick to reproduce the issue: hardcode
CHANGES_THRESHOLD at 1 and run test_decoding (test "ddl" being enough)
on an instance running valgrind. The bug has been analyzed by Ethan
Mertz, who also originally suggested the solution used in this patch.
Issue introduced by 8c58624df4, so backpatch down to v16.
Author: Ethan Mertz <ethan.mertz@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/aIsQqDZ7x4LAQ6u1@paquier.xyz
Backpatch-through: 16
Currently, ALTER DATABASE/ROLE/SYSTEM RESET [ALL] with an unknown
custom GUC with a prefix reserved by MarkGUCPrefixReserved() errors
(unless a superuser runs a RESET ALL variant). This is problematic
for cases such as an extension library upgrade that removes a GUC.
To fix, simply make sure the relevant code paths explicitly allow
it. Note that we require superuser or privileges on the parameter
to reset it. This is perhaps a bit more restrictive than is
necessary, but it's not clear whether further relaxing the
requirements is safe.
Oversight in commit 88103567cb. The ALTER SYSTEM fix is dependent
on commit 2d870b4aef, which first appeared in v17. Unfortunately,
back-patching that commit would introduce ABI breakage, and while
that breakage seems unlikely to bother anyone, it doesn't seem
worth the risk. Hence, the ALTER SYSTEM part of this commit is
omitted on v15 and v16.
Reported-by: Mert Alev <mert@futo.org>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/18964-ba09dea8c98fccd6%40postgresql.org
Backpatch-through: 15
PostgreSQL always sends the BackendKeyData message at connection
startup, but there are some third party backend implementations out
there that don't support cancellation, and don't send the message
[1]. While the protocol docs left it up for interpretation if that is
valid behavior, libpq in PostgreSQL 17 and below accepted it. It does
not seem like the libpq behavior was intentional though, since it did
so by sending CancelRequest messages with all zeros to such servers
(instead of returning an error or making the cancel a no-op).
In version 18 the behavior was changed to return an error when trying
to create the cancel object with PGgetCancel() or PGcancelCreate().
This was done without any discussion, as part of supporting different
lengths of cancel packets for the new 3.2 version of the protocol.
This commit changes the behavior of PGgetCancel() / PGcancel() once
more to only return an error when the cancel object is actually used
to send a cancellation, instead of when merely creating the object.
The reason to do so is that some clients [2] create a cancel object as
part of their connection creation logic (thus having the cancel object
ready for later when they need it), so if creating the cancel object
returns an error, the whole connection attempt fails. By delaying the
error, such clients will still be able to connect to the third party
backend implementations in question, but when actually trying to
cancel a query, the user will be notified that that is not possible
for the server that they are connected to.
This commit only changes the behavior of the older PGgetCancel() /
PQcancel() functions, not the more modern PQcancelCreate() family of
functions. I.e. PQcancelCreate() returns a failed connection object
(CONNECTION_BAD) if the server didn't send a cancellation key. Unlike
the old PQgetCancel() function, we're not aware of any clients in the
field that use PQcancelCreate() during connection startup in a way
that would prevent connecting to such servers.
[1] AWS RDS Proxy is definitely one of them, and CockroachDB might be
another.
[2] psycopg2 (but not psycopg3).
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Backpatch-through: 18
Discussion: https://www.postgresql.org/message-id/20250617.101056.1437027795118961504.ishii%40postgresql.org
A deadlock can occur when the DDL command and the apply worker acquire
catalog locks in different orders while dropping replication origins.
The issue is rare in PG16 and higher branches because, in most cases, the
tablesync worker performs the origin drop in those branches, and its
locking sequence does not conflict with DDL operations.
This patch ensures consistent lock acquisition to prevent such deadlocks.
As per buildfarm.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Ajin Cherian <itsajin@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/bab95e12-6cc5-4ebb-80a8-3e41956aa297@gmail.com
Commit c407d5426b added tab completion for ALTER ROLE|USER ... RESET,
with the intent to offer only the variables actually set on the role.
But as soon as the user started typing something, it would start to
offer all possible matching variables.
Fix this the same way ALTER DATABASE ... RESET does it, i.e. by
properly considering the prefix.
A second issue causing similar symptoms (offering variables that are not
actually set for a role) was caused by a match to another pattern. The
ALTER DATABASE ... RESET was already excluded, so do the same thing for
ROLE/USER.
Report and fix by Dagfinn Ilmari Mannsåker. Backpatch to 18, same as
c407d5426b.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/87qzyghw2x.fsf%40wibble.ilmari.org
Discussion: https://postgr.es/m/87tt4lumqz.fsf%40wibble.ilmari.org
Backpatch-through: 18
Commit 9df8727c50 failed to schema-quality the unnest() call in the
query used to list the variables in ALTER DATABASE ... RESET. If there's
another unnest() function in the search_path, this could cause either
failures, or even security issues (when the tab-completion gets used by
privileged accounts).
Report and fix by Dagfinn Ilmari Mannsåker. Backpatch to 18, same as
9df8727c50.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/87qzyghw2x.fsf%40wibble.ilmari.org
Discussion: https://postgr.es/m/87tt4lumqz.fsf%40wibble.ilmari.org
Backpatch-through: 18
pg_dump sorts objects by their logical names, e.g. (nspname, relname,
tgname), before dependency-driven reordering. That removes one source
of logically-identical databases differing in their schema-only dumps.
In other words, it helps with schema diffing. The logical name sort
ignored essential sort keys for constraints, operators, PUBLICATION
... FOR TABLE, PUBLICATION ... FOR TABLES IN SCHEMA, operator classes,
and operator families. pg_dump's sort then depended on object OID,
yielding spurious schema diffs. After this change, OIDs affect dump
order only in the event of catalog corruption. While pg_dump also
wrongly ignored pg_collation.collencoding, CREATE COLLATION restrictions
have been keeping that imperceptible in practical use.
Use techniques like we use for object types already having full sort key
coverage. Where the pertinent queries weren't fetching the ignored sort
keys, this adds columns to those queries and stores those keys in memory
for the long term.
The ignorance of sort keys became more problematic when commit
172259afb5 added a schema diff test
sensitive to it. Buildfarm member hippopotamus witnessed that.
However, dump order stability isn't a new goal, and this might avoid
other dump comparison failures. Hence, back-patch to v13 (all supported
versions).
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20250707192654.9e.nmisch@google.com
Backpatch-through: 13
The sentence in question gave readers the impression that vacuumdb
removes statistics for a period of time while analyzing, but it's
actually meant to convey that --analyze-in-stages temporarily
replaces existing statistics with ones generated with lower
statistics targets.
Reported-by: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Reviewed-by: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Reviewed-by: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/4b94ca16-7a6d-4581-b2aa-4ea79dbc082a%40dalibo.com
Backpatch-through: 18
Recent discussions of the mechanisms used to manage global data have
raised concerns about their robustness and security. Rather than try
to deal with those concerns at a very late stage of the release cycle,
the conclusion is to revert these features and work on them for the
next release.
This reverts parts or all of the following commits:
1495eff7bd Non text modes for pg_dumpall, correspondingly change pg_restore
5db3bf7391 Clean up from commit 1495eff7bd289f74d0cb Add more TAP tests for pg_dumpall
2ef5790806 Fix a couple of error messages and tests for them
b52a4a5f28 Clean up error messages from 1495eff7bd4170298b6e Further cleanup for directory creation on pg_dump/pg_dumpall
22cb6d2895 Fix memory leak in pg_restore.c
928394b664 Improve various new-to-v18 appendStringInfo calls
39729ec01d Fix fat fingering in 22cb6d28955822bf21d5 Add missing space in pg_restore documentation.
f09088a01d Free memory properly in pg_restore.c
40b9c27014 pg_restore cleanups
4aad2cb770 Portability fix: isdigit() must be passed an unsigned char.
88e947136b Fix typos and grammar in the code
f60420cff6 doc: Alphabetize long options for pg_dump[all].
bc35adee8d doc: Put new options in consistent order on man pages
a876464abc Message style improvements
dec6643487 Improve pg_dump/pg_dumpall help synopses and terminology
0ebd242555 Run pgperltidy
Discussion: https://postgr.es/m/20250708212819.09.nmisch@google.com
Backpatch-to: 18
Reviewed-by: Noah Misch <noah@leadboat.com>
The configure checks used two incorrect functions when checking the
presence of some routines in an environment:
- __get_cpuidex() for the check of __cpuidex().
- __get_cpuid() for the check of __cpuid().
This means that Postgres has never been able to detect the presence of
these functions, impacting environments where these exist, like Windows.
Simply fixing the function name does not work. For example, using
configure with MinGW on Windows causes the checks to detect all four of
__get_cpuid(), __get_cpuid_count(), __cpuidex() and __cpuid() to be
available, causing a compilation failure as this messes up with the
MinGW headers as we would include both <intrin.h> and <cpuid.h>.
The Postgres code expects only one in { __get_cpuid() , __cpuid() } and
one in { __get_cpuid_count() , __cpuidex() } to exist. This commit
reshapes the configure checks to do exactly what meson is doing, which
has been working well for us: check one, then the other, but never allow
both to be detected in a given build.
The logic is wrong since 3dc2d62d04 and 792752af4e where these
checks have been introduced (the second case is most likely a copy-pasto
coming from the first case), with meson documenting that the configure
checks were broken. As far as I can see, they are not once applied
consistently with what the code expects, but let's see if the buildfarm
has different something to say. The comment in meson.build is adjusted
as well, to reflect the new reality.
Author: Lukas Fittl <lukas@fittl.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aIgwNYGVt5aRAqTJ@paquier.xyz
Backpatch-through: 13
If the client sent a query cancel request with backend PID 0, it
tripped an assertion. With assertions disabled, you got this in the
log instead:
LOG: invalid cancel request with PID 0
LOG: wrong key in cancel request for process 0
Query cancellations don't even require authentication, so we better
tolerate bogus requests. Fix by turning the assertion into a regular
runtime check.
Spotted while testing libpq behavior with a modified server that
didn't send BackendKeyData to the client.
Backpatch-through: 18
Peter Eisentraut