All backend-side variables should be marked with PGDLLIMPORT, as per
policy introduced in 8ec569479f. aafc05de1b has forgotten
MyClientSocket, and 05c3980e7f LoadedSSL.
These can be spotted with a command like this one (be careful of not
switching __pg_log_level):
src/tools/mark_pgdllimport.pl $(git ls-files src/include/)
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/ZhzkRzrkKhbeQMRm@paquier.xyz
Previously, we had consecutive, very short chapters called "Generic
WAL" and "Custom WAL Resource Managers," explaining different approaches
to the same problem. Merge them into a single chapter. Explain most
of the differences between the approaches in the chapter's
introductory text, rather than in the individual sections.
Discussion: http://postgr.es/m/46ac50c1-6b2a-404f-a683-b67af6ab56e9@eisentraut.org
The documentation for SET ROLE states that superusers who switch to
a non-superuser role lose their superuser privileges. While this
is true for most commands, there are exceptions such as SET ROLE
and SET SESSION AUTHORIZATION, which continue to use the current
session user and the authenticated user, respectively.
Furthermore, the description of this command already describes its
effect, so it is arguably unnecessary to include this special case.
This commit removes the note about the superuser case and adds a
sentence about the aforementioned exceptions to the description.
Co-authored-by: Yurii Rashkovskii
Reviewed-by: Shubham Khanna, Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/CA%2BRLCQysHtME0znk2KUMJN343ksboSRQSU-hCnOjesX6VK300Q%40mail.gmail.com
Commit 2ed8f9a01 intended to institute a policy that if a
RangeTblFunction has a coldeflist, then the function return type is
certainly RECORD, and we should use the coldeflist as the source of
truth about what the columns of the record type are. When the
original function has been folded to a constant, inspection of the
constant might give a different answer. This situation will lead to
a tuple-type-mismatch error at execution, but up until that point we
need to consistently believe the coldeflist, or we'll have problems
from different bits of code reaching different conclusions.
expandRTE didn't get that memo though, and would try to produce a
tupdesc based on the constant in this situation, leading to an
assertion failure. (Desultory testing suggests that non-assert
builds often manage to give the expected error, although I also
saw a "cache lookup failed for type 0" error, and it seems at
least possible that a crash could happen.)
Some other callers of get_expr_result_type and get_expr_result_tupdesc
were also being incautious about this. While none of them seem to
have actual bugs, they're working harder than necessary in this case,
besides which it seems safest to have an explicit policy of not using
those functions on an RTE with a coldeflist. Adjust the code
accordingly, and add commentary to funcapi.c about this policy.
Also fix an obsolete comment that claimed "get_expr_result_type()
doesn't know how to extract type info from a RECORD constant".
That hasn't been true since commit d57534740.
Per bug #18422 from Alexander Lakhin.
As with the previous commit, back-patch to all supported branches.
Discussion: https://postgr.es/m/18422-89ca86c8eac5246d@postgresql.org
When matching constraints in AttachPartitionEnsureIndexes() we weren't
testing the constraint type, which could make a UNIQUE key lacking a
not-null constraint incorrectly satisfy a primary key requirement. Fix
this by testing that the constraint types match. (Other possible
mismatches are verified by comparing index properties.)
Discussion: https://postgr.es/m/202402051447.wimb4xmtiiyb@alvherre.pgsql
In one of the many strange corner cases of multiple inheritance being
used, commit b0e96f3119 missed a CommandCounterIncrement() call after
updating the attnotnull flag during ALTER TABLE ADD COLUMN, which caused
a catalog tuple to be update attempted twice in the same command, giving
rise to a "tuple already updated by self" error. Add the missing call
to solve that, and a test case that reproduces the scenario.
As a (perhaps surprising) secondary effect, this CCI addition triggers
another behavior change: when a primary key is added to a parent
partitioned table and the column in an existing partition does not have
a not-null constraint, we no longer error out. This will probably be a
welcome change by some users, and I think it's unlikely that anybody
will miss the old behavior.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: http://postgr.es/m/045dec3f-9b3d-aa44-0c99-85f6992306c7@gmail.com
\dD showed domain check constraints in arbitrary order, which can
cause regression test failures, which was exposed by commit
9895b35cb8. To fix, order the constraints by conname, which matches
what psql does in other queries listing constraints.
This addresses a few problems with commit e5da0fe3c2 ("Catalog domain
not-null constraints").
In CREATE DOMAIN, a NOT NULL constraint looks like
CREATE DOMAIN d1 AS int [ CONSTRAINT conname ] NOT NULL
(Before e5da0fe3c2, the constraint name was accepted but ignored.)
But in ALTER DOMAIN, a NOT NULL constraint looks like
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL VALUE
where VALUE is where for a table constraint the column name would be.
(This works as of e5da0fe3c2. Before e5da0fe3c2, this syntax
resulted in an internal error.)
But for domains, this latter syntax is confusing and needlessly
inconsistent between CREATE and ALTER. So this changes it to just
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL
(None of these syntaxes are per SQL standard; we are just living with
the bits of inconsistency that have built up over time.)
In passing, this also changes the psql \dD output to not show not-null
constraints in the column "Check", since it's already shown in the
column "Nullable". This has also been off since e5da0fe3c2.
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/9ec24d7b-633d-463a-84c6-7acff769c9e8%40eisentraut.org
Coverity pointed out that the function checks for conn->sslmode !=
NULL, which implies that it might be NULL, but later we access it
without a NULL-check anyway. It doesn't know that it is in fact always
initialized earlier, in conninfo_add_defaults(), and hence the
NULL-check is not necessary. However, there is a lot of distance
between conninfo_add_defaults() and pqConnectOptions2(), so it's not
surprising that it doesn't see that. Put back the initialization code,
as it existed before commit 05fd30c0e7, to silence the warning.
In the long run, I'd like to refactor the libpq options handling and
initalization code. It seems silly to strdup() and copy strings, for
things like sslmode that have a limited set of possible values; it
should be an enum. But that's for another day.
Commit 10e3226ba1 added padding to incremental backups to ensure the
block data is properly aligned. The code in sendFile() however failed to
consider that the header may be a multiple of BLCKSZ and thus already
aligned, adding a full BLCKSZ of unnecessary padding.
Not only does this make the incremental file a bit larger, but the other
places calculating the amount of padding did realize it's not needed and
did not include it in the formula. This resulted in pg_basebackup
getting confused while parsing the data stream, trying to access files
with invalid filenames (e.g. with binary data etc.) and failing.
Adds a regression test for parallel CREATE INDEX for BRIN indexes, to
improve coverage for BRIN code, particularly code to allow parallel
index builds introduced by b437571714.
The test is added to pageinspect, as that allows comparing the index to
one built without parallelism. Another option would be to just build the
index with parallelism and then check it produces correct results. But
checking the index is exactly as if built without parallelism makes
these query checks unnecessary.
Discussion: https://postgr.es/m/1df00a66-db5a-4e66-809a-99b386a06d86%40enterprisedb.com
Commit 6bcda4a721 replaced PG_DETOAST_DATUM with PG_DETOAST_DATUM_PACKED
in two BRIN output functions, for minmax-multi and bloom opclasses. But
this is incorrect - the code is accessing the data through structs that
already include a 4B header, so the detoast needs to match that. But the
PACKED macro may keep the 1B header, which means the struct fields will
point to incorrect data.
Backpatch-through: 16
Discussion: https://postgr.es/m/1df00a66-db5a-4e66-809a-99b386a06d86%40enterprisedb.com
Properly update the number of bits set in the bitmap after merging the
filters in brin_bloom_union.
This is mostly harmless, as the counter is used only in the output
function, which means pageinspect may show incorrect information about
the BRIN summary. The counter does not affect correctness.
Discovered while adding a regression test comparing indexes built with
and without parallelism. The parallel index builds exercise the union
procedure when merging results from workers, which is otherwise very
hard to do in a test. Which is why this went unnoticed until now.
Backpatch through 14, where the BRIN bloom opclasses were introduced.
Backpatch-through: 14
Discussion: https://postgr.es/m/1df00a66-db5a-4e66-809a-99b386a06d86%40enterprisedb.com
GetPageWithFreeSpace() callers assume the returned block exists in the
main fork, failing with "could not read block" errors if that doesn't
hold. Make that assumption reliable now. It hadn't been guaranteed,
due to the weak WAL and data ordering of participating components. Most
operations on the fsm fork are not WAL-logged. Relation extension is
not WAL-logged. Hence, an fsm-fork block on disk can reference a
main-fork block that no WAL record has initialized. That could happen
after an OS crash, a replica promote, or a PITR restore. wal_log_hints
makes the trouble easier to hit; a replica promote or PITR ending just
after a relevant fsm-fork FPI_FOR_HINT may yield this broken state. The
v16 RelationAddBlocks() mechanism also makes the trouble easier to hit,
since it bulk-extends even without extension lock waiters. Commit
917dc7d239 stopped trouble around
truncation, but vectors involving PageIsNew() pages remained.
This implementation adds a RelationGetNumberOfBlocks() call when the
cached relation size doesn't confirm a block exists. We've been unable
to identify a benchmark that slows materially, but this may show up as
additional time in lseek(). An alternative without that overhead would
be a new ReadBufferMode such that ReadBufferExtended() returns NULL
after a 0-byte read, with all other errors handled normally. However,
each GetFreeIndexPage() caller would then need code for the return-NULL
case. Back-patch to v14, due to earlier versions not caching relation
size and the absence of a pre-v16 problem report.
Ronan Dunklau. Reported by Ronan Dunklau.
Discussion: https://postgr.es/m/1878547.tdWV9SEqCh%40aivenlaptop
In the libpq encryption negotiation tests, don't run the GSSAPI tests
unless PG_TEST_EXTRA='kerberos' is also set. That makes it possible to
still run most of the tests when GSSAPI support is compiled in, but
there's no MIT Kerberos installation.
The test targets libpq's options, so 'src/test/interfaces/libpq/t' is
a more natural place for it.
While doing this, I noticed that I had missed adding the
libpq_encryption subdir to the Makefile. That's why this commit only
needs to remove it from the meson.build file.
Per Peter Eisentraut's suggestion.
Discussion: https://www.postgresql.org/message-id/09d4bf5d-d0fa-4c66-a1d7-5ec757609646@eisentraut.org
It correctly skipped tests involving SSL in the server when SSL
support was not compiled in, but even when SSL is not enabled in the
server and the connection is established without SSL, libpq behaves
differently in many of the test scenarios when libpq is compiled
without SSL support. For example, with sslmode=prefer, if libpq is
compiled with SSL support it will attempt to use SSL, but without SSL
support it will try authenticating in plaintext mode directly. The
expected test output didn't take that into account.
Discussion: https://www.postgresql.org/message-id/CA%2BhUKG%2BHRTtB%2Bx%2BKKKj_cfX6sNhbeGuqmGxjGMwdVPG7YGFP8w@mail.gmail.com
Per gripes from Michael Paquier
Discussion: https://postgr.es/m/ZhTQ6_w1vwOhqTQI@paquier.xyz
Along the way, also clean up a handful of typos in 3311ea86ed and
ea7b4e9a2a, found by Alexander Lakhin, and a couple of stylistic
snafus noted by Daniel Westermann and Daniel Gustafsson.
Coverity complained about not freeing some memory associated with
incrementally parsing backup manifests. To fix that, provide and use a new
shutdown function for the JsonManifestParseIncrementalState object, in
line with a suggestion from Tom Lane.
While analysing the problem, I noticed a buglet in freeing memory for
incremental json lexers. To fix that remove a bogus condition on
freeing the memory allocated for them.
Ensure that when updating the catalog_xmin of the synced slots, it is
first written to disk before changing the in-memory value
(effective_catalog_xmin). This is to prevent a scenario where the
in-memory value change triggers a vacuum to remove catalog tuples before
the catalog_xmin is written to disk. In the event of a crash before the
catalog_xmin is persisted, we would not know that some required catalog
tuples have been removed and the synced slot would be invalidated.
Change the sanity check to ensure that remote_slot's confirmed_flush LSN
can't precede the local/synced slot during slot sync. Note that the
restart_lsn of the synced/local slot can be ahead of remote_slot. This can
happen when slot advancing machinery finds a running xacts record after
reaching the consistent state at a later point than the primary where it
serializes the snapshot and updates the restart_lsn.
Make the check to sync slots robust by allowing to sync only when the
confirmed_lsn, restart_lsn, or catalog_xmin of the remote slot is ahead of
the synced/local slot.
Reported-by: Amit Kapila and Shveta Malik
Author: Hou Zhijie, Shveta Malik
Reviewed-by: Amit Kapila, Bertrand Drouvot
Discussion: https://postgr.es/m/OS0PR01MB57162B67D3CB01B2756FBA6D94062@OS0PR01MB5716.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/CAJpy0uCSS5zmdyUXhvw41HSdTbRqX1hbYqkOfHNj7qQ+2zn0AQ@mail.gmail.com
b262ad440 added code to have the planner remove redundant IS NOT NULL
quals and eliminate needless scans for IS NULL quals on tables where the
qual's column has a NOT NULL constraint.
That commit failed to consider that an inheritance parent table could
have differing NOT NULL constraints between the parent and the child.
This caused issues as if we eliminated a qual on the parent, when
applying the quals to child tables in apply_child_basequals(), the qual
might not have been added to the parent's baserestrictinfo.
Here we fix this by not applying the optimization to remove redundant
quals to RelOptInfos belonging to inheritance parents and applying the
optimization again in apply_child_basequals(). Effectively, this means
that the parent and child are considered independently as the parent has
both an inh=true and inh=false RTE and we still apply the optimization
to the RelOptInfo corresponding to the inh=false RTE.
We're able to still apply the optimization in add_base_clause_to_rel()
for partitioned tables as the NULLability of partitions must match that
of their parent. And, if we ever expand restriction_is_always_false()
and restriction_is_always_true() to handle partition constraints then we
can apply the same logic as, even in multi-level partitioned tables,
there's no way to route values to a partition when the qual does not
match the partition qual of the partitioned table's parent partition.
The same is true for CHECK constraints as those must also match between
arent partitioned tables and their partitions.
Author: Richard Guo, David Rowley
Discussion: https://postgr.es/m/CAMbWs4930gQSZmjR7aANzEapdy61gCg6z8dT-kAEYD0sYWKPdQ@mail.gmail.com
A pairing heap can perform the same operations as the binary heap +
index, with as good or better algorithmic complexity, and that's an
existing data structure so that we don't need to invent anything new
compared to v16. This commit makes the new binaryheap functionality
that was added in commits b840508644 and bcb14f4abc unnecessary, but
they will be reverted separately.
Remove the optimization to only build and maintain the heap when the
amount of memory used is close to the limit, becuase the bookkeeping
overhead with the pairing heap seems to be small enough that it
doesn't matter in practice.
Reported-by: Jeff Davis
Author: Heikki Linnakangas
Reviewed-by: Michael Paquier, Hayato Kuroda, Masahiko Sawada
Discussion: https://postgr.es/m/12747c15811d94efcc5cda72d6b35c80d7bf3443.camel%40j-davis.com
The user can set RELSEG_SIZE to a high number at compile time, so we
can't use it to control the size of an array on the stack: it could be
many gigabytes in size. On closer inspection, we don't really need that
intermediate array anyway. Let's just write directly into the output
array, and then perform the absolute->relative adjustment in place.
This fixes new code from commit dc21234005.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2B2hZ0sBztPW4mkLfng0qfkNtAHFUfxOMLizJ0BPmi5%2Bg%40mail.gmail.com
aa5edbe379 has tweaked _hash_freeovflpage() so as the write buffer's
LSN is updated only when necessary, when REGBUF_NO_CHANGE is not used.
The replay code was not consistent with that, causing the write buffer's
LSN to be updated and its page to be marked as dirty even if the buffer
was registered in a "clean" state. This was possible for the case of a
squeeze record when there are no tuples to add to the write buffer, for
(is_prim_bucket_same_wrt && !is_prev_bucket_same_wrt).
I have performed some validation of this commit with
wal_consistency_checking and a change in WAL that logs REGBUF_NO_CHANGE
to a new BKPIMAGE_*. Thanks to that, it is possible to know at replay
if a buffer was clean when it was registered, then cross-checked the LSN
of the "clean" page copy coming from WAL with the LSN of the block once
the record has been replayed. This eats one bit in bimg_info, which is
not acceptable to be integrated as-is, but it could become handy in the
future. I didn't spot other areas than the one fixed by this commit at
the extent of what the main regression test suite covers.
As this is an oversight in aa5edbe379, no backpatch is required.
Reported-by: Zubeyr Eryilmaz
Author: Hayato Kuroda
Reviewed-by: Amit Kapila, Michael Paquier
Discussion: https://postgr.es/m/ZbyVVG_7eW3YD5-A@paquier.xyz
Up to now, read_sql_construct() has collected all the source text from
the statement or expression's initial token up to the character just
before the "until" token. It normally tries to strip trailing
whitespace from that, largely for neatness. If there was a "-- text"
comment after the expression, this resulted in removing the newline
that terminates the comment, which creates a hazard if we try to paste
the collected text into a larger SQL construct without inserting a
newline after it. In particular this caused our handling of CASE
constructs to fail if there's a comment after a WHEN expression.
Commit 4adead1d2 noticed a similar problem with cursor arguments,
and worked around it through the rather crude hack of suppressing
the whitespace-trimming behavior for those. Rather than do that
and leave the hazard open for future hackers to trip over, let's
fix it properly. pl_scanner.c already has enough infrastructure
to report the end location of the expression's last token, so
we can copy up to that location and never collect any trailing
whitespace or comment to begin with.
Erik Wienhold and Tom Lane, per report from Michal Bartak.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAAVzF_FjRoi8fOVuLCZhQJx6HATQ7MKm=aFOHWZODFnLmjX-xA@mail.gmail.com
The tools.ietf.org site has been decommissioned and replaced by a
number of sites serving various purposes. Links to RFCs and BCPs
are now 301 redirected to their new respective IETF sites. Since
this serves no purpose and only adds network overhead, update our
links to the new locations.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/3C1CEA99-FCED-447D-9858-5A579B4C6687@yesql.se
Backpatch-through: v12
f587338dec has introduced in the test module injection_points a SQL
function called injection_points_set_local(), that can be used to make
all the injection points linked to the process where they are attached,
discarded automatically if any remain once the process exits.
e2e3b8ae9e has added a NO_INSTALLCHECK to the test module to prevent
the use of installcheck. Now that there is a way to make the test
concurrent-safe, let's use it and remove the installcheck restriction.
Concurrency issues could be easily reproduced by running in a tight
loop a command like this one, in src/test/modules/gin/ (hardcoding
pg_sleep() after attaching injection points enlarges the race window)
and a second test suite like contrib/btree_gin/:
make installcheck USE_MODULE_DB=1
Reviewed-by: Andrey Borodin
Discussion: https://postgr.es/m/ZhNG4Io9uYOgwv3F@paquier.xyz
Wait for the standby to catch up before syncing the slots with
pg_sync_replication_slots(), otherwise, the logical slot could be ahead
and the sync would fail.
The other way to fix the test is to change it to use slotsync worker and
poll for the sync to get finished but the current approach is better as
this is a predictable way to write the test.
Per buildfarm
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB571665359F2F5DCD3ADABC9F94002@OS0PR01MB5716.jpnprd01.prod.outlook.com
Commit 72559438 started copying more attributes from AttributeTemplate
to the functions we generate on the fly. In the case of deform
functions, which return void, this meant that "noundef", from
AttributeTemplate's return value (a Datum) was copied to a void type.
Older LLVM releases were OK with that, but LLVM 18 crashes.
Update our llvm_copy_attributes() function to skip copying the attribute
for the return value, if the target function returns void.
Thanks to Dmitry Dolgov for help chasing this down.
Back-patch to all supported releases, like 72559438.
Reported-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Discussion: https://postgr.es/m/CAFj8pRACpVFr7LMdVYENUkScG5FCYMZDDdSGNU-tch%2Bw98OxYg%40mail.gmail.com
This adjusts various appendStringInfo* function calls to use a more
appropriate and efficient function with the same behavior. For example,
use appendStringInfoChar() when appending a single character rather than
appendStringInfo() and appendStringInfoString() when no formatting is
required rather than using appendStringInfo().
All adjustments made here are in code that's new to v17, so it makes
sense to fix these now rather than wait a few years and make
backpatching harder.
Discussion: https://postgr.es/m/CAApHDvojY2UvMiO+9_55ArTj10P1LBNJyyoGB+C65BLDNT0GsQ@mail.gmail.com
Reviewed-by: Nathan Bossart, Tom Lane
Michael Paquier