Restore nbtree preprocessing comments describing how we mark nbtree row
compare members required to how they were prior to 2016 bugfix commit
a298a1e0.
Oversight in commit bd3f59fd, which made nbtree preprocessing revert to
the original 2006 rules, but neglected to revert these comments.
Backpatch-through: 18
The array-based variant of width_bucket() has always accepted NaN
inputs, treating them as equal but larger than any non-NaN,
as we do in ordinary comparisons. But up to now, the four-argument
variants threw errors for a NaN operand. This is inconsistent
and unnecessary, since we can perfectly well regard NaN as falling
after the last bucket.
We do still throw error for NaN or infinity histogram-bound inputs,
since there's no way to compute sensible bucket boundaries.
Arguably this is a bug fix, but given the lack of field complaints
I'm content to fix it in master.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/2822872.1750540911@sss.pgh.pa.us
Trying to alter a constraint so that it becomes NOT VALID results in an
error that assumes the constraint is a foreign key. This is potentially
wrong, so give a more generic error message.
While at it, give CREATE CONSTRAINT TRIGGER a better error message as
well.
Co-authored-by: jian he <jian.universality@gmail.com>
Co-authored-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Co-authored-by: Álvaro Herrera <alvherre@kurilemu.de>
Co-authored-by: Amul Sul <sulamul@gmail.com>
Discussion: https://postgr.es/m/CACJufxHSp2puxP=q8ZtUGL1F+heapnzqFBZy5ZNGUjUgwjBqTQ@mail.gmail.com
Recent nbtree bugfix commit 5f4d98d4 added a special case to the code
that sets up a page-level prefix of keys that are definitely satisfied
by every tuple on the page: whenever _bt_set_startikey reached a row
compare key, we'd refuse to apply the pstate.forcenonrequired behavior
in scans where that usually happens (scans with a higher-order array
key). That hack made the scan avoid essentially the same infinite
cycling behavior that also affected nbtree scans with redundant keys
(keys that preprocessing could not eliminate) prior to commit f09816a0.
There are now serious doubts about this row compare workaround.
Testing has shown that a scan with a row compare key and an array key
could still read the same leaf page twice (without the scan's direction
changing), which isn't supposed to be possible following the SAOP
enhancements added by Postgres 17 commit 5bf748b8. Also, we still
allowed a required row compare key to be used with forcenonrequired mode
when its header key happened to be beyond the pstate.ikey set by
_bt_set_startikey, which was complicated and brittle.
The underlying problem was that row compares had inconsistent rules
around how scans start (which keys can be used for initial positioning
purposes) and how scans end (which keys can set continuescan=false).
Quals with redundant keys that could not be eliminated by preprocessing
also had that same quality to them prior to today's bugfix f09816a0. It
now seems prudent to bring row compare keys in line with the new charter
for required keys, by making the start and end rules symmetric.
This commit fixes two points of disagreement between _bt_first and
_bt_check_rowcompare. Firstly, _bt_check_rowcompare was capable of
ending the scan at the point where it needed to compare an ISNULL-marked
row compare member that came immediately after a required row compare
member. _bt_first now has symmetric handling for NULL row compares.
Secondly, _bt_first had its own ideas about which keys were safe to use
for initial positioning purposes. It could use fewer or more keys than
_bt_check_rowcompare. _bt_first now uses the same requiredness markings
as _bt_check_rowcompare for this.
Now that _bt_first and _bt_check_rowcompare agree on how to start and
end scans, we can get rid of the forcenonrequired special case, without
any risk of infinite cycling. This approach also makes row compare keys
behave more like regular scalar keys, particularly within _bt_first.
Fixing these inconsistencies necessitates dealing with a related issue
with the way that row compares were marked required by preprocessing: we
didn't mark any lower-order row members required following 2016 bugfix
commit a298a1e0. That approach was over broad. The bug in question was
actually an oversight in how _bt_check_rowcompare dealt with tuple NULL
values that failed to satisfy a scan key marked required in the opposite
scan direction (it was a bug in 2011 commits 6980f817 and 882368e8, not
a bug in 2006 commit 3a0a16cb). Go back to marking row compare members
as required using the original 2006 rules, and fix the 2016 bug in a
more principled way: by limiting use of the "set continuescan=false with
a key required in the opposite scan direction upon encountering a NULL
tuple value" optimization to the first/most significant row member key.
While it isn't safe to use an implied IS NOT NULL qualifier to end the
scan when it comes from a required lower-order row compare member key,
it _is_ generally safe for such a required member key to end the scan --
provided the key is marked required in the _current_ scan direction.
This fixes what was arguably an oversight in either commit 5f4d98d4 or
commit 8a510275. It is a direct follow-up to today's commit f09816a0.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <heikki.linnakangas@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wz=pcijHL_mA0_TJ5LiTB28QpQ0cGtT-ccFV=KzuunNDDQ@mail.gmail.com
Backpatch-through: 18
nbtree preprocessing's handling of redundant (and contradictory) keys
created problems for scans with = arrays. It was just about possible
for a scan with an = array key and one or more redundant keys (keys that
preprocessing could not eliminate due an incomplete opfamily and a
cross-type key) to get stuck. Testing has shown that infinite cycling
where the scan never manages to make forward progress was possible.
This could happen when the scan's arrays were reset in _bt_readpage's
forcenonrequired=true path (added by bugfix commit 5f4d98d4) when the
arrays weren't at least advanced up to the same point that they were in
at the start of the _bt_readpage call. Earlier redundant keys prevented
the finaltup call to _bt_advance_array_keys from reaching lower-order
keys that needed to be used to sufficiently advance the scan's arrays.
To fix, make preprocessing leave the scan's keys in a state that is as
close as possible to how it'll usually leave them (in the common case
where there's no redundant keys that preprocessing failed to eliminate).
Now nbtree preprocessing _reliably_ leaves behind at most one required
>/>= key per index column, and at most one required </<= key per index
column. Columns that have one or more = keys that are eligible to be
marked required (based on the traditional rules) prioritize the = keys
over redundant inequality keys; they'll _reliably_ be left with only one
of the = keys as the index column's only required key.
Keys that are not marked required (whether due to the new preprocessing
step running or for some other reason) are relocated to the end of the
so->keyData[] array as needed. That way they'll always be evaluated
after the scan's required keys, and so cannot prevent code in places
like _bt_advance_array_keys and _bt_first from reaching a required key.
Also teach _bt_first to decide which initial positioning keys to use
based on the same requiredness markings that have long been used by
_bt_checkkeys/_bt_advance_array_keys. This is a necessary condition for
reliably avoiding infinite cycling. _bt_advance_array_keys expects to
be able to reason about what'll happen in the next _bt_first call should
it start another primitive index scan, by evaluating inequality keys
that were marked required in the opposite-to-scan scan direction only.
Now everybody (_bt_first, _bt_checkkeys, and _bt_advance_array_keys)
will always agree on which exact key will be used on each index column
to start and/or end the scan (except when row compare keys are involved,
which have similar problems not addressed by this commit).
An upcoming commit will finish off the work started by this commit by
harmonizing how _bt_first, _bt_checkkeys, and _bt_advance_array_keys
apply row compare keys to start and end scans.
This fixes what was arguably an oversight in either commit 5f4d98d4 or
commit 8a510275.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <heikki.linnakangas@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wz=ds4M+3NXMgwxYxqU8MULaLf696_v5g=9WNmWL2=Uo2A@mail.gmail.com
Backpatch-through: 18
The previous minimum was to maintain support for Python 3.5, but we
now require Python 3.6 anyway (commit 45363fca63), so that reason is
obsolete. A small raise to Meson 0.57 allows getting rid of a fair
amount of version conditionals and silences some future-deprecated
warnings.
With the version bump, the following deprecation warnings appeared and
are fixed:
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.55.0': ExternalProgram.path. use ExternalProgram.full_path() instead
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.56.0': meson.build_root. use meson.project_build_root() or meson.global_build_root() instead.
It turns out that meson 0.57.0 and 0.57.1 are buggy for our use, so
the minimum is actually set to 0.57.2. This is specific to this
version series; in the future we won't necessarily need to be this
precise.
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/42e13eb0-862a-441e-8d84-4f0fd5f6def0%40eisentraut.org
Commit c120550edb optimized the vacuuming of relations without
indexes (a.k.a. one-pass strategy) by directly marking dead item IDs
as LP_UNUSED. However, the periodic FSM vacuum was still checking if
dead item IDs had been marked as LP_DEAD when attempting to vacuum the
FSM every VACUUM_FSM_EVERY_PAGES blocks. This condition was never met
due to the optimization, resulting in missed FSM vacuum
opportunities.
This commit modifies the periodic FSM vacuum condition to use the
number of tuples deleted during HOT pruning. This count includes items
marked as either LP_UNUSED or LP_REDIRECT, both of which are expected
to result in new free space to report.
Back-patch to v17 where the vacuum optimization for tables with no
indexes was introduced.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAD21AoBL8m6B9GSzQfYxVaEgvD7-Kr3AJaS-hJPHC+avm-29zw@mail.gmail.com
Backpatch-through: 17
When decompressing some input data, the calculation for the initial
starting point and the initial size were incorrect, potentially leading
to failures when decompressing contents with LZ4. These initialization
points are fixed in this commit, bringing the logic closer to what
exists for gzip and zstd.
The contents of the compressed data is clear (for example backups taken
with LZ4 can still be decompressed with a "lz4" command), only the
decompression part reading the input data was impacted by this issue.
This code path impacts pg_basebackup and pg_verifybackup, which can use
the LZ4 decompression routines with an archive streamer, or any tools
that try to use the archive streamers in src/fe_utils/.
The issue is easier to reproduce with files that have a low-compression
rate, like ones filled with random data, for a size of at least 512kB,
but this could happen with anything as long as it is stored in a data
folder. Some tests are added based on this idea, with a file filled
with random bytes grabbed from the backend, written at the root of the
data folder. This is proving good enough to reproduce the original
problem.
Author: Mikhail Gribkov <youzhick@gmail.com>
Discussion: https://postgr.es/m/CAMEv5_uQS1Hg6KCaEP2JkrTBbZ-nXQhxomWrhYQvbdzR-zy-wA@mail.gmail.com
Backpatch-through: 15
This commit moves all the routines related to the bytea data type into
its own new file, called bytea.c, clearing some of the bloat in
varlena.c. This includes the routines for:
- Input, output, receive and send
- Comparison
- Casts to integer types
- bytea-specific functions
The internals of the routines moved here are unchanged, with one
exception. This comes with a twist in bytea_string_agg_transfn(), where
the call to makeStringAggState() is replaced by the internals of this
routine, still located in varlena.c. This simplifies the move to the
new file by not having to expose makeStringAggState().
Author: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CAJ7c6TMPVPJ5DL447zDz5ydctB8OmuviURtSwd=PHCRFEPDEAQ@mail.gmail.com
Prior to this patch, every FETCH call would generate a unique queryId
with a different size specified. Depending on the workloads, this could
lead to a significant bloat in pg_stat_statements, as repeatedly calling
a specific cursor would result in a new queryId each time. For example,
FETCH 1 c1; and FETCH 2 c1; would produce different queryIds.
This patch improves the situation by normalizing the fetch size, so as
semantically similar statements generate the same queryId. As a result,
statements like the below, which differ syntactically but have the same
effect, will now share a single queryId:
FETCH FROM c1
FETCH NEXT c1
FETCH 1 c1
In order to do a normalization based on the keyword used in FETCH,
FetchStmt is tweaked with a new FetchDirectionKeywords. This matters
for "howMany", which could be set to a negative value depending on the
direction, and we want to normalize the queries with enough information
about the direction keywords provided, including RELATIVE, ABSOLUTE or
all the ALL variants.
Author: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0tA6LbHCg2qSS+KuM850BZC_+ZgHV7Ug6BXw22TNyF+MA@mail.gmail.com
We stopped defining IOV_MAX on non-Windows systems in 75357ab94, on
the assumption that every non-Windows system defines it in <limits.h>
as required by X/Open. GNU Hurd, however, doesn't follow that
standard either. Put back the old logic to assume 16 if it's
not defined.
Author: Michael Banck <mbanck@gmx.net>
Co-authored-by: Christoph Berg <myon@debian.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/6862e8d1.050a0220.194b8d.76fa@mx.google.com
Discussion: https://postgr.es/m/6846e0c3.df0a0220.39ef9b.c60e@mx.google.com
Backpatch-through: 16
The existing code assumed that O_RDONLY is defined as 0, but this is
not required by POSIX and is not true on GNU Hurd. We can avoid
the assumption by relying on O_ACCMODE to mask the fcntl() result.
(Hopefully, all supported platforms define that.)
Author: Michael Banck <mbanck@gmx.net>
Co-authored-by: Samuel Thibault
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/6862e8d1.050a0220.194b8d.76fa@mx.google.com
Discussion: https://postgr.es/m/68480868.5d0a0220.1e214d.68a6@mx.google.com
Backpatch-through: 13
Previously, pattern matching and case mapping behavior branched based
on the provider. Refactor to use a method table, which is less
error-prone.
This is also a step toward multiple provider versions, which we may
want to support in the future.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/2830211e1b6e6a2e26d845780b03e125281ea17b.camel%40j-davis.com
Querying the NUMA status can be quite time consuming, especially with
large shared buffers. 8cc139bec3 called numa_move_pages() once, for
all buffers, and we had to wait for the syscall to complete.
But with the chunking, introduced by 7fe2f67c7c to work around a kernel
bug, we can do CHECK_FOR_INTERRUPTS() after each chunk, allowing users
to abort the execution.
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aEtDozLmtZddARdB@msg.df7cb.de
Backpatch-through: 18
When querying NUMA status of pages in shared memory, we need to touch
the memory first to get valid results. This may trigger valgrind
reports, because some of the memory (e.g. unpinned buffers) may be
marked as noaccess.
Solved by adding a valgrind suppresion. An alternative would be to
adjust the access/noaccess status before touching the memory, but that
seems far too invasive. It would require all those places to have
detailed knowledge of what the shared memory stores.
The pg_numa_touch_mem_if_required() macro is replaced with a function.
Macros are invisible to suppressions, so it'd have to suppress reports
for the caller - e.g. pg_get_shmem_allocations_numa(). So we'd suppress
reports for the whole function, and that seems to heavy-handed. It might
easily hide other valid issues.
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aEtDozLmtZddARdB@msg.df7cb.de
Backpatch-through: 18
There's a kernel bug in do_pages_stat(), affecting systems combining
64-bit kernel and 32-bit user space. The function splits the request
into chunks of 16 pointers, but forgets the pointers are 32-bit when
advancing to the next chunk. Some of the pointers get skipped, and
memory after the array is interpreted as pointers. The result is that
the produced status of memory pages is mostly bogus.
Systems combining 64-bit and 32-bit environments like this might seem
rare, but that's not the case - all 32-bit Debian packages are built in
a 32-bit chroot on a system with a 64-bit kernel.
This is a long-standing kernel bug (since 2010), affecting pretty much
all kernels, so it'll take time until all systems get a fixed kernel.
Luckily, we can work around the issue by chunking the requests the same
way do_pages_stat() does, at least on affected systems. We don't know
what kernel a 32-bit build will run on, so all 32-bit builds use chunks
of 16 elements (the largest chunk before hitting the issue).
64-bit builds are not affected by this issue, and so could work without
the chunking. But chunking has other advantages, so we apply chunking
even for 64-bit builds, with chunks of 1024 elements.
Reported-by: Christoph Berg <myon@debian.org>
Author: Christoph Berg <myon@debian.org>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aEtDozLmtZddARdB@msg.df7cb.de
Context: https://marc.info/?l=linux-mm&m=175077821909222&w=2
Backpatch-through: 18
Switch MSVC to use the conforming preprocessor, using the
/Zc:preprocessor option.
This allows us to drop the alternative implementation of
VA_ARGS_NARGS() for the previous "traditional" preprocessor.
This also prepares the way for enabling C11 mode in the future, which
enables the conforming preprocessor by default.
This now requires Visual Studio 2019. The installation documentation
is adjusted accordingly.
Discussion: https://www.postgresql.org/message-id/flat/01a69441-af54-4822-891b-ca28e05b215a%40eisentraut.org
The contrib module xml2/ has always been fuzzy with the cleanup of the
memory allocated by the calls internal to libxml2, even if there are
APIs in place giving a lot of control over the error behavior, all
located in the backend's xml.c.
The code paths fixed in the commit address multiple defects, while
sanitizing the code:
- In xpath.c, several allocations are done by libxml2 for
xpath_workspace, whose memory cleanup could go out of sight as it relied
on a single TRY/CATCH block done in pgxml_xpath(). workspace->res is
allocated by libxml2, and may finish by not being freed at all upon a
failure outside of a TRY area. This code is refactored so as the
TRY/CATCH block of pgxml_xpath() is moved one level higher to its
callers, which are responsible for cleaning up the contents of a
workspace on failure. cleanup_workspace() now requires a volatile
workspace, forcing as a rule that a TRY/CATCH block should be used.
- Several calls, like xmlStrdup(), xmlXPathNewContext(),
xmlXPathCtxtCompile(), etc. can return NULL on failures (for most of
them allocation failures. These forgot to check for failures, or missed
that pg_xml_error_occurred() should be called, to check if an error is
already on the stack.
- Some memory allocated by libxml2 calls was freed in an incorrect way,
"resstr" in xslt_process() being one example.
The class of errors fixed here are for problems that are unlikely going
to happen in practice, so no backpatch is done. The changes have
finished by being rather invasive, so it is perhaps not a bad thing to
be conservative and to keep these changes only on HEAD anyway.
Author: Michael Paquier <michael@paquier.xyz>
Reported-by: Karavaev Alexey <maralist86@mail.ru>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18943-2f2a04ab03904598@postgresql.org
This commit fixes some defects in the backend's xml.c, found upon
inspection of the internals of libxml2:
- xmlEncodeSpecialChars() can fail on malloc(), returning NULL back to
the caller. xmltext() assumed that this could never happen. Like other
code paths, a TRY/CATCH block is added there, covering also the fact
that cstring_to_text_with_len() could fail a memory allocation, where
the backend would miss to free the buffer allocated by
xmlEncodeSpecialChars().
- Some libxml2 routines called in xmlelement() can return NULL, like
xmlAddChildList() or xmlTextWriterStartElement(). Dedicated errors are
added for them.
- xml_xmlnodetoxmltype() missed that xmlXPathCastNodeToString() can fail
on an allocation failure. In this case, the call can just be moved to
the existing TRY/CATCH block.
All these code paths would cause the server to crash. As this is
unlikely a problem in practice, no backpatch is done. Jim and I have
caught these defects, not sure who has scored the most. The contrib
module xml2/ has similar defects, which will be addressed in a separate
change.
Reported-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/aEEingzOta_S_Nu7@paquier.xyz
The current code in resolve_column_ref (dating to commits 01f7d2990
and fe24d7816) believes that not finding a RECFIELD datum is a
can't-happen case, in consequence of which I didn't spend a whole lot
of time considering what to do if it did happen. But it turns out
that it *can* happen if the would-be field name is a fully-reserved
PL/pgSQL keyword. Change the error message to describe that
situation, and add a test case demonstrating it.
This might need further refinement if anyone can find other ways to
trigger a failure here; but without an example it's not clear what
other error to throw.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://postgr.es/m/2185258.1745617445@sss.pgh.pa.us
On close inspection, there does not seem to be a strong reason
why these should be fully-reserved keywords. I guess they just
escaped consideration in previous attempts to minimize PL/pgSQL's
list of reserved words.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://postgr.es/m/2185258.1745617445@sss.pgh.pa.us
This provides a convenient way to look up a database's OID. For
example, the query
SELECT * FROM pg_shdepend
WHERE dbid = (SELECT oid FROM pg_database
WHERE datname = current_database());
can now be simplified to
SELECT * FROM pg_shdepend
WHERE dbid = current_database()::regdatabase;
Like the regrole type, regdatabase has cluster-wide scope, so we
disallow regdatabase constants from appearing in stored
expressions.
Bumps catversion.
Author: Ian Lawrence Barwick <barwick@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/aBpjJhyHpM2LYcG0%40nathan
If the method is called in scalar context and we didn't pass in a stderr
handle, one won't be created. However, some error paths assume that it
exists, so in this case create a dummy stderr to avoid the resulting
perl error.
Per gripe from Oleg Tselebrovskiy <o.tselebrovskiy@postgrespro.ru> and
adapted from his patch.
Discussion: https://postgr.es/m/378eac5de4b8ecb5be7bcdf2db9d2c4d@postgrespro.ru
Previously, tab completion for COPY only suggested plain tables
and partitioned tables, even though materialized views are also
valid for COPY TO (since commit 534874fac0), and foreign tables
are valid for COPY FROM.
This commit enhances tab completion for COPY to also include
materialized views and foreign tables.
Views with INSTEAD OF INSERT triggers are supported with
COPY FROM but rarely used, so plain views are intentionally
excluded from completion.
Author: jian he <jian.universality@gmail.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/CACJufxFxnSkikp+GormAGHcMTX1YH2HRXW1+3dJM9w7yY9hdsg@mail.gmail.com
When postfix operators where dropped in 1ed6b8956, the CREATE OPERATOR
docs were not updated to make the RIGHTARG argument mandatory in the
grammar.
While at it, make the RIGHTARG docs more concise. Also, the operator
docs were mentioning "infix" in the introduction, while using "binary"
everywhere else.
Author: Christoph Berg <myon@debian.org>
Discussion: https://www.postgresql.org/message-id/flat/aAtpbnQphv4LWAye@msg.df7cb.de
Commit 1546e17f9d accidentally misspelled additionally as
additionaly. Backpatch to v17 to match where the original
commit was backpatched.
Author: Daniel Gustafsson <daniel@yesql.se>
Backpatch-through: 17
Peter Geoghegan