Since commit 3b8f6e75f, failure to do this would lead to
submake-generated-headers not doing anything, so that references to
generated or symlinked headers would fail. Previous to that, the
omission only led to temp-install not doing anything, which apparently
affects many fewer people (doesn't anybody use "make check" in their
build rules??). Hence, backpatch to v11 but not further.
Per complaints from Christoph Berg, Jakob Egger, and others.
A database owner running a database-level REINDEX has the possibility to
also do the operation on shared system catalogs without being an owner
of them, which allows him to block resources it should not have access
to. The same goes for a schema owner. For example, PostgreSQL would go
unresponsive and even block authentication if a lock is waited for
pg_authid. This commit makes sure that a user running a REINDEX SYSTEM,
DATABASE or SCHEMA only works on the following relations:
- The user is a superuser
- The user is the table owner
- The user is the database/schema owner, only if the relation worked on
is not shared.
Robert has worded most the documentation changes, and I have coded the
core part.
Reported-by: Lloyd Albin, Jeremy Schneider
Author: Michael Paquier, Robert Haas
Reviewed by: Nathan Bossart, Kyotaro Horiguchi
Discussion: https://postgr.es/m/152512087100.19803.12733865831237526317@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20180805211059.GA2185@paquier.xyz
Backpatch-through: 11- as the current behavior has been around for a
very long time and could be disruptive for already released branches.
This Assert thought that a given rel couldn't be both leaf and
non-leaf, but it turns out that in some unusual plan trees
that's wrong, so remove it.
The lack of testing for cases like that is quite concerning ---
there is little reason for confidence that there aren't other
bugs in the area. But developing a stable test case seems
rather difficult, and in any case we don't need this Assert.
David Rowley
Discussion: https://postgr.es/m/CAJGNTeOkdk=UVuMugmKL7M=owgt4nNr1wjxMg1F+mHsXyLCzFA@mail.gmail.com
The amcheck documentation incorrectly claimed that its example query
verifies every catalog index in the database. In fact, the query only
verifies the 10 largest indexes (as determined by pg_class.relpages).
Adjust the description accordingly.
Backpatch: 10-, where contrib/amcheck was introduced.
GNUmakefile.in defined a macro "garbage" that seems to have been meant
as a suitable target for automatic "rm -rf" treatment, but it isn't
actually used anywhere (and indeed never was, AFAICT).
Moreover, we have concluded that the Makefiles shouldn't take it upon
themselves to remove files that aren't expected by-products of building,
so that doing anything like that would be against project policy anyway.
Hence, just remove the macro.
Grepping around finds another violation of that policy in ecpg/preproc,
so clean that up too.
Daniel Gustafsson (ecpg change by me)
Discussion: https://postgr.es/m/AFBEF63E-E19D-4EBB-9F08-4617CDC751ED@yesql.se
exit() is not async-signal safe. Even if the libc implementation is, 3rd
party libraries might have installed unsafe atexit() callbacks. After
receiving SIGQUIT, we really just want to exit as quickly as possible, so
we don't really want to run the atexit() callbacks anyway.
The original report by Jimmy Yih was a self-deadlock in startup_die().
However, this patch doesn't address that scenario; the signal handling
while waiting for the startup packet is more complicated. But at least this
alleviates similar problems in the SIGQUIT handlers, like that reported
by Asim R P later in the same thread.
Backpatch to 9.3 (all supported versions).
Discussion: https://www.postgresql.org/message-id/CAOMx_OAuRUHiAuCg2YgicZLzPVv5d9_H4KrL_OFsFP%3DVPekigA%40mail.gmail.com
Commit 1c2cb2744 added some code that tried to detect whether two
RelOptInfos were the "same" rel by pointer comparison; but it turns
out that inheritance_planner breaks that, through its shenanigans
with copying some relations forward into new subproblems. Compare
relid sets instead. Add a regression test case to exercise this
area.
Problem reported by Rushabh Lathia; diagnosis and fix by Amit Langote,
modified a bit by me.
Discussion: https://postgr.es/m/CAGPqQf3anJGj65bqAQ9edDr8gF7qig6_avRgwMT9MsZ19COUPw@mail.gmail.com
CreateUserMapping has a recordDependencyOnCurrentExtension call that's
been there since extensions were introduced (very possibly my fault).
However, there's no support anywhere else for user mappings as members
of extensions, nor are they listed as a possible member object type in
the documentation. Nor does it really seem like a good idea for user
mappings to belong to extensions when roles don't. Hence, remove the
bogus call.
(As we saw in bug #15310, the lack of any pg_dump support for this case
ensures that any such membership record would silently disappear during
pg_upgrade. So there's probably no need for us to do anything else
about cleaning up after this mistake.)
Discussion: https://postgr.es/m/27952.1533667213@sss.pgh.pa.us
Since commit c8e8b5a6e, this has been zeroed out using the wrong length.
In practice the length would always be too small, leading to not zeroing
the whole buffer rather than clobbering additional memory; and that's
pretty harmless, both because shmem would likely start out as zeroes
and because we'd reinitialize any given entry before use. Still,
it's bogus, so fix it.
Reported by Petru-Florin Mihancea (bug #15312)
Discussion: https://postgr.es/m/153363913073.1303.6518849192351268091@wrigleys.postgresql.org
pg_dump with --binary-upgrade must emit ALTER EXTENSION ADD commands
for all objects that are members of extensions. It forgot to do so for
event triggers, as per bug #15310 from Nick Barnes. Back-patch to 9.3
where event triggers were introduced.
Haribabu Kommi
Discussion: https://postgr.es/m/153360083872.1395.4593932457718151600@wrigleys.postgresql.org
The original coding here (which is, I believe, my fault) supposed that
it didn't need to concern itself with the possibility that one object
of a given type-priority has a namespace while another doesn't. But
that's not reliably true anymore, if it ever was; and if it does happen
then it's possible that DOTypeNameCompare returns self-inconsistent
comparison results. That leads to unspecified behavior in qsort()
and a resultant weird output order from pg_dump.
This should end up being only a cosmetic problem, because any ordering
constraints that actually matter should be enforced by the later
dependency-based sort. Still, it's a bug, so back-patch.
Report and fix by Jacob Champion, though I editorialized on his
patch to the extent of making NULL sort after non-NULL, for consistency
with our usual sorting definitions.
Discussion: https://postgr.es/m/CABAq_6Hw+V-Kj7PNfD5tgOaWT_-qaYkc+SRmJkPLeUjYXLdxwQ@mail.gmail.com
The logic in PQconnectPoll() did not take care to ensure that all of
a PGconn's internal state variables were reset before trying a new
connection attempt. If we got far enough in the connection sequence
to have changed any of these variables, and then decided to try a new
server address or server name, the new connection might be completed
with some state that really only applied to the failed connection.
While this has assorted bad consequences, the only one that is clearly
a security issue is that password_needed didn't get reset, so that
if the first server asked for a password and the second didn't,
PQconnectionUsedPassword() would return an incorrect result. This
could be leveraged by unprivileged users of dblink or postgres_fdw
to allow them to use server-side login credentials that they should
not be able to use.
Other notable problems include the possibility of forcing a v2-protocol
connection to a server capable of supporting v3, or overriding
"sslmode=prefer" to cause a non-encrypted connection to a server that
would have accepted an encrypted one. Those are certainly bugs but
it's harder to paint them as security problems in themselves. However,
forcing a v2-protocol connection could result in libpq having a wrong
idea of the server's standard_conforming_strings setting, which opens
the door to SQL-injection attacks. The extent to which that's actually
a problem, given the prerequisite that the attacker needs control of
the client's connection parameters, is unclear.
These problems have existed for a long time, but became more easily
exploitable in v10, both because it introduced easy ways to force libpq
to abandon a connection attempt at a late stage and then try another one
(rather than just giving up), and because it provided an easy way to
specify multiple target hosts.
Fix by rearranging PQconnectPoll's state machine to provide centralized
places to reset state properly when moving to a new target host or when
dropping and retrying a connection to the same host.
Tom Lane, reviewed by Noah Misch. Our thanks to Andrew Krasichkov
for finding and reporting the problem.
Security: CVE-2018-10915
There are some problems with the tls-unique channel binding type. It's not
supported by all SSL libraries, and strictly speaking it's not defined for
TLS 1.3 at all, even though at least in OpenSSL, the functions used for it
still seem to work with TLS 1.3 connections. And since we had no
mechanism to negotiate what channel binding type to use, there would be
awkward interoperability issues if a server only supported some channel
binding types. tls-server-end-point seems feasible to support with any SSL
library, so let's just stick to that.
This removes the scram_channel_binding libpq option altogether, since there
is now only one supported channel binding type.
This also removes all the channel binding tests from the SSL test suite.
They were really just testing the scram_channel_binding option, which
is now gone. Channel binding is used if both client and server support it,
so it is used in the existing tests. It would be good to have some tests
specifically for channel binding, to make sure it really is used, and the
different combinations of a client and a server that support or doesn't
support it. The current set of settings we have make it hard to write such
tests, but I did test those things manually, by disabling
HAVE_BE_TLS_GET_CERTIFICATE_HASH and/or
HAVE_PGTLS_GET_PEER_CERTIFICATE_HASH.
I also removed the SCRAM_CHANNEL_BINDING_TLS_END_POINT constant. This is a
matter of taste, but IMO it's more readable to just use the
"tls-server-end-point" string.
Refactor the checks on whether the SSL library supports the functions
needed for tls-server-end-point channel binding. Now the server won't
advertise, and the client won't choose, the SCRAM-SHA-256-PLUS variant, if
compiled with an OpenSSL version too old to support it.
In the passing, add some sanity checks to check that the chosen SASL
mechanism, SCRAM-SHA-256 or SCRAM-SHA-256-PLUS, matches whether the SCRAM
exchange used channel binding or not. For example, if the client selects
the non-channel-binding variant SCRAM-SHA-256, but in the SCRAM message
uses channel binding anyway. It's harmless from a security point of view,
I believe, and I'm not sure if there are some other conditions that would
cause the connection to fail, but it seems better to be strict about these
things and check explicitly.
Discussion: https://www.postgresql.org/message-id/ec787074-2305-c6f4-86aa-6902f98485a4%40iki.fi
Remove description of commit 1944cdc98, which has now been back-patched
so it's not relevant to v11 any longer. Add descriptions of other
recent commits that seemed worth mentioning.
I marked the update as stopping at 2018-07-30, because it's unclear
whether d06eebce5 will be allowed to stay in v11, and I didn't feel like
putting effort into writing a description of it yet. If it does stay,
I think it will deserve mention in the Source Code section.
When expanding an updatable view that is an INSERT's target, the rewriter
failed to rewrite Vars in the ON CONFLICT UPDATE clause. This accidentally
worked if the view was just "SELECT * FROM ...", as the transformation
would be a no-op in that case. With more complicated view targetlists,
this omission would often lead to "attribute ... has the wrong type" errors
or even crashes, as reported by Mario De Frutos Dieguez.
Fix by adding code to rewriteTargetView to fix up the data structure
correctly. The easiest way to update the exclRelTlist list is to rebuild
it from scratch looking at the new target relation, so factor the code
for that out of transformOnConflictClause to make it sharable.
In passing, avoid duplicate permissions checks against the EXCLUDED
pseudo-relation, and prevent useless view expansion of that relation's
dummy RTE. The latter is only known to happen (after this patch) in cases
where the query would fail later due to not having any INSTEAD OF triggers
for the view. But by exactly that token, it would create an unintended
and very poorly tested state of the query data structure, so it seems like
a good idea to prevent it from happening at all.
This has been broken since ON CONFLICT was introduced, so back-patch
to 9.5.
Dean Rasheed, based on an earlier patch by Amit Langote;
comment-kibitzing and back-patching by me
Discussion: https://postgr.es/m/CAFYwGJ0xfzy8jaK80hVN2eUWr6huce0RU8AgU04MGD00igqkTg@mail.gmail.com
6cb3372 enforces errno to ENOSPC when less bytes than what is expected
have been written when it is unset, though it forgot to properly reset
errno before doing a system call to write(), causing errno to
potentially come from a previous system call.
Reported-by: Tom Lane
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/31797.1533326676@sss.pgh.pa.us
This suite malfunctioned if the canonical name of "localhost" was
something other than "localhost", such as "localhost.localdomain". Use
hostaddr=127.0.0.1 and a fictitious host=, so the resolver's answers for
"localhost" don't affect the outcome. Back-patch to v11, which
introduced this test suite.
Discussion: https://postgr.es/m/20180801050903.GA1392916@rfd.leadboat.com
It's necessary to make sure that owning tables have a relcache
invalidation prior to advancing the command counter to make
newly-entered catalog tuples for the index visible. inval.c must be
able to maintain the consistency of the local caches in the event of
transaction abort. There is usually only a problem when CREATE INDEX
transactions abort, since there is a generic invalidation once we reach
index_update_stats().
This bug is of long standing. Problems were made much more likely by
the addition of parallel CREATE INDEX (commit 9da0cc3528), but it is
strongly suspected that similar problems can be triggered without
involving plan_create_index_workers(). (plan_create_index_workers()
triggers a relcache build or rebuild, which previously only happened in
rare edge cases.)
Author: Peter Geoghegan
Reported-By: Luca Ferrari
Diagnosed-By: Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAKoxK+5fVodiCtMsXKV_1YAKXbzwSfp7DgDqUmcUAzeAhf=HEQ@mail.gmail.com
Backpatch: 9.3-
The example output of pg_replication_slot is wrong. Correct it and make
the output stable by explicitly listing columns to output.
Author: Kyotaro Horiguchi <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20180731.190909.42582169.horiguchi.kyotaro@lab.ntt.co.jp
\conninfo prints the results of PQhost() and some other libpq functions.
It used to override the PQhost() result with the hostaddr parameter if
that'd been given, but that's unhelpful when multiple hosts were listed
in the connection string. Furthermore, it seems unnecessary in the wake
of commit 1944cdc98, since PQhost does any useful substitution itself.
So let's just remove the extra code and print PQhost()'s result without
any editorialization.
Back-patch to v10, as 1944cdc98 (just) was.
Discussion: https://postgr.es/m/23287.1533227021@sss.pgh.pa.us
Commit 1944cdc98 changed PQhost() to return the hostaddr value when that
is specified and host isn't. This is a good idea in general, but
fe-auth.c and related files contain PQhost() calls for which it isn't.
Specifically, when we compare SSL certificates or other server identity
information to the host field, we do not want to use hostaddr instead;
that's not what's documented, that's not what happened pre-v10, and
it doesn't seem like a good idea.
Instead, we can just look at connhost[].host directly. This does what
we want in v10 and up; in particular, if neither host nor hostaddr
were given, the host field will be replaced with the default host name.
That seems useful, and it's likely the reason that these places were
coded to call PQhost() originally (since pre-v10, the stored field was
not replaced with the default).
Back-patch to v10, as 1944cdc98 (just) was.
Discussion: https://postgr.es/m/23287.1533227021@sss.pgh.pa.us
The buffer usage stats is accounted only for the execution phase of the
node. For Gather and Gather Merge nodes, such stats are accumulated at
the time of shutdown of workers which is done after execution of node due
to which we missed to account them for such nodes. Fix it by treating
nodes as running while we shut down them.
We can also miss accounting for a Limit node when Gather or Gather Merge
is beneath it, because it can finish the execution before shutting down
such nodes. So we allow a Limit node to shut down the resources before it
completes the execution.
In the passing fix the gather node code to allow workers to shut down as
soon as we find that all the tuples from the workers have been retrieved.
The original code use to do that, but is accidently removed by commit
01edb5c7fc.
Reported-by: Adrien Nayrat
Author: Amit Kapila and Robert Haas
Reviewed-by: Robert Haas and Andres Freund
Backpatch-through: 9.6 where this code was introduced
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info
In the leader backend, we don't track the buffer usage for ExecutorStart
phase whereas in worker backend we track it for ExecutorStart phase as
well. This leads to different value for buffer usage stats for the
parallel and non-parallel query. Change the code so that worker backend
also starts tracking buffer usage after ExecutorStart.
Author: Amit Kapila and Robert Haas
Reviewed-by: Robert Haas and Andres Freund
Backpatch-through: 9.6 where this code was introduced
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info
pmsignal.h uses sig_atomic_t in some builds, but relied on signal.h
having been included already. We could include it conditionally
but evidently that wouldn't save anything in practice and would
add more ugly macros, so let's just include signal.h always.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/4166.1533154074%40sss.pgh.pa.us
The previous coding here supposed that if run-time partitioning applied to
a particular Append/MergeAppend plan, then all child plans of that node
must be members of a single partitioning hierarchy. This is totally wrong,
since an Append could be formed from a UNION ALL: we could have multiple
hierarchies sharing the same Append, or child plans that aren't part of any
hierarchy.
To fix, restructure the related plan-time and execution-time data
structures so that we can have a separate list or array for each
partitioning hierarchy. Also track subplans that are not part of any
hierarchy, and make sure they don't get pruned.
Per reports from Phil Florent and others. Back-patch to v11, since
the bug originated there.
David Rowley, with a lot of cosmetic adjustments by me; thanks also
to Amit Langote for review.
Discussion: https://postgr.es/m/HE1PR03MB17068BB27404C90B5B788BCABA7B0@HE1PR03MB1706.eurprd03.prod.outlook.com
This was broken in commit 9c7d06d606, which inadvertently gave the
wrong value to fast_forward in one StartupDecodingContext call. Fix by
flipping the value. Add a test for the obvious error, namely trying to
initialize a replication slot with an nonexistent output plugin.
While at it, move the CreateDecodingContext call earlier, so that any
errors are reported before sending the CopyBoth message.
Author: Dave Cramer <davecramer@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CADK3HHLVkeRe1v4P02-5hj55H3_yJg3AEtpXyEY5T3wuzO2jSg@mail.gmail.com
Some operations were being done in a longer-lived memory context,
causing intra-query leaks. It's not noticeable unless you're doing a
large COPY, but if you are, it eats enough memory to cause a problem.
Co-authored-by: Kohei KaiGai <kaigai@heterodb.com>
Co-authored-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAOP8fzYtVFWZADq4c=KoTAqgDrHWfng+AnEPEZccyxqxPVbbWQ@mail.gmail.com
Before v10, we always searched ~/.pgpass using the host parameter,
and nothing else, to match to the "hostname" field of ~/.pgpass.
(However, null host or host matching DEFAULT_PGSOCKET_DIR was replaced by
"localhost".) In v10, this got broken by commit 274bb2b38, repaired by
commit bdac9836d, and broken again by commit 7b02ba62e; in the code
actually shipped, we'd search with hostaddr if both that and host were
specified --- though oddly, *not* if only hostaddr were specified.
Since this is directly contrary to the documentation, and not
backwards-compatible, it's clearly a bug.
However, the change wasn't totally without justification, even though it
wasn't done quite right, because the pre-v10 behavior has arguably been
buggy since we added hostaddr. If hostaddr is specified and host isn't,
the pre-v10 code will search ~/.pgpass for "localhost", and ship that
password off to a server that most likely isn't local at all. That's
unhelpful at best, and could be a security breach at worst.
Therefore, rather than just revert to that old behavior, let's define
the behavior as "search with host if provided, else with hostaddr if
provided, else search for localhost". (As before, a host name matching
DEFAULT_PGSOCKET_DIR is replaced by localhost.) This matches the
behavior of the actual connection code, so that we don't pick up an
inappropriate password; and it allows useful searches to happen when
only hostaddr is given.
While we're messing around here, ensure that empty elements within a
host or hostaddr list select the same behavior as a totally-empty
field would; for instance "host=a,,b" is equivalent to "host=a,/tmp,b"
if DEFAULT_PGSOCKET_DIR is /tmp. Things worked that way in some cases
already, but not consistently so, which contributed to the confusion
about what key ~/.pgpass would get searched with.
Update documentation accordingly, and also clarify some nearby text.
Back-patch to v10 where the host/hostaddr list functionality was
introduced.
Discussion: https://postgr.es/m/30805.1532749137@sss.pgh.pa.us
CopyFrom allows multi-inserts to be used for non-partitioned tables, but
this was disabled for partitioned tables. The reason for this appeared
to be that the tuple may not belong to the same partition as the
previous tuple did. Not allowing multi-inserts here greatly slowed down
imports into partitioned tables. These could take twice as long as a
copy to an equivalent non-partitioned table. It seems wise to do
something about this, so this change allows the multi-inserts by
flushing the so-far inserted tuples to the partition when the next tuple
does not belong to the same partition, or when the buffer fills. This
improves performance when the next tuple in the stream commonly belongs
to the same partition as the previous tuple.
In cases where the target partition changes on every tuple, using
multi-inserts slightly slows the performance. To get around this we
track the average size of the batches that have been inserted and
adaptively enable or disable multi-inserts based on the size of the
batch. Some testing was done and the regression only seems to exist
when the average size of the insert batch is close to 1, so let's just
enable multi-inserts when the average size is at least 1.3. More
performance testing might reveal a better number for, this, but since
the slowdown was only 1-2% it does not seem critical enough to spend too
much time calculating it. In any case it may depend on other factors
rather than just the size of the batch.
Allowing multi-inserts for partitions required a bit of work around the
per-tuple memory contexts as we must flush the tuples when the next
tuple does not belong the same partition. In which case there is no
good time to reset the per-tuple context, as we've already built the new
tuple by this time. In order to work around this we maintain two
per-tuple contexts and just switch between them every time the partition
changes and reset the old one. This does mean that the first of each
batch of tuples is not allocated in the same memory context as the
others, but that does not matter since we only reset the context once
the previous batch has been inserted.
Author: David Rowley <david.rowley@2ndquadrant.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
This allows out-of-tree PLs and similar code to get access to
definitions needed to work with extension data types.
The following existing modules now install headers: contrib/cube,
contrib/hstore, contrib/isn, contrib/ltree, contrib/seg.
Discussion: https://postgr.es/m/87y3euomjh.fsf%40news-spur.riddles.org.uk
Commits 742869946 et al turn out to be a couple bricks shy of a load.
We were dumping the stored values of GUC_LIST_QUOTE variables as they
appear in proconfig or setconfig catalog columns. However, although that
quoting rule looks a lot like SQL-identifier double quotes, there are two
critical differences: empty strings ("") are legal, and depending on which
variable you're considering, values longer than NAMEDATALEN might be valid
too. So the current technique fails altogether on empty-string list
entries (as reported by Steven Winfield in bug #15248) and it also risks
truncating file pathnames during dump/reload of GUC values that are lists
of pathnames.
To fix, split the stored value without any downcasing or truncation,
and then emit each element as a SQL string literal.
This is a tad annoying, because we now have three copies of the
comma-separated-string splitting logic in varlena.c as well as a fourth
one in dumputils.c. (Not to mention the randomly-different-from-those
splitting logic in libpq...) I looked at unifying these, but it would
be rather a mess unless we're willing to tweak the API definitions of
SplitIdentifierString, SplitDirectoriesString, or both. That might be
worth doing in future; but it seems pretty unsafe for a back-patched
bug fix, so for now accept the duplication.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/7585.1529435872@sss.pgh.pa.us
In commit 84940644de, bms_add_range was added with an API to fail with
an error if an empty range was specified. This seems arbitrary and
unhelpful, so turn that case into a no-op instead. Callers that require
further verification on the arguments or result can apply them by
themselves.
This fixes the bug that partition pruning throws an API error for a case
involving the default partition of a default partition, as in the
included test case.
Reported-by: Rajkumar Raghuwanshi <rajkumar.raghuwanshi@enterprisedb.com>
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/16590.1532622503@sss.pgh.pa.us
"make installcheck" and some related cases, when invoked from the toplevel
directory, start out by doing "make all" in src/test/regress. Since that's
one make recursion level down, the submake-generated-headers target will
do nothing, causing us to fail to create/update generated headers before
building pg_regress. This is, I believe, a new failure mode induced by
commit 3b8f6e75f, so let's fix it. To do so, we have to invoke
submake-generated-headers at the top level.
Discussion: https://postgr.es/m/0401efec-68f1-679d-3ea3-21d4e8dd11af@gmail.com
Alvaro Herrera