Remove conditionally-compiled code for smaller Datum widths,
and simplify comments that describe cases no longer of interest.
I also fixed up a few more places that were not using
DatumGetIntXX where they should, and made some cosmetic
adjustments such as using sizeof(int64) not sizeof(Datum)
in places where that fit better with the surrounding code.
One thing I remembered while preparing this part is that SP-GiST
stores pass-by-value prefix keys as Datums, so that the on-disk
representation depends on sizeof(Datum). That's even more
unfortunate than the existing commentary makes it out to be,
because now there is a hazard that the change of sizeof(Datum)
will break SP-GiST indexes on 32-bit machines. It appears that
there are no existing SP-GiST opclasses that are actually
affected; and if there are some that I didn't find, the number
of installations that are using them on 32-bit machines is
doubtless tiny. So I'm proceeding on the assumption that we
can get away with this, but it's something to worry about.
(gininsert.c looks like it has a similar problem, but it's okay
because the "tuples" it's constructing are just transient data
within the tuplesort step. That's pretty poorly documented
though, so I added some comments.)
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/1749799.1752797397@sss.pgh.pa.us
Set body indent to 0 to make use of the horizontal space better (and
some reviewers thought it was also more readable).
Add some left and right margin to the warning boxes, otherwise they
drift too far off the page in combination with the above change.
Author: Noboru Saito <noborusai@gmail.com>
Reviewed-by: Hayato Kuroda (Fujitsu) <kuroda.hayato@fujitsu.com>
Reviewed-by: Florents Tselai <florents.tselai@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Discussion: https://www.postgresql.org/message-id/flat/CAAM3qnLyMUD79XF+SqAVwWCwURCF3hyuFY9Ki9Csbqs-zMwwnw@mail.gmail.com
A malicious server could inject psql meta-commands into plain-text
dump output (i.e., scripts created with pg_dump --format=plain,
pg_dumpall, or pg_restore --file) that are run at restore time on
the machine running psql. To fix, introduce a new "restricted"
mode in psql that blocks all meta-commands (except for \unrestrict
to exit the mode), and teach pg_dump, pg_dumpall, and pg_restore to
use this mode in plain-text dumps.
While at it, encourage users to only restore dumps generated from
trusted servers or to inspect it beforehand, since restoring causes
the destination to execute arbitrary code of the source superusers'
choice. However, the client running the dump and restore needn't
trust the source or destination superusers.
Reported-by: Martin Rakhmanov
Reported-by: Matthieu Denais <litezeraw@gmail.com>
Reported-by: RyotaK <ryotak.mail@gmail.com>
Suggested-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Security: CVE-2025-8714
Backpatch-through: 13
Although the "Floating-Point Types" section says that "float" data
type is taken to mean "double precision", this information was not
reflected in the data type table that lists all data type aliases.
Reported-by: alexander.kjall@hafslund.no
Author: Euler Taveira <euler@eulerto.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/175456294638.800.12038559679827947313@wrigleys.postgresql.org
Backpatch-through: 13
Small touch-up on commits 25505082f0 and 50fd428b2b. Fix the
formatting of the example messages in the documentation and adjust the
wording to match the code.
ALTER TABLE ... SET EXPRESSION AS removes statistics for the target column,
so running ANALYZE afterward is recommended. But this was previously not
documented, even though a similar recommendation exists for
ALTER TABLE ... SET DATA TYPE, which also clears the column's statistics.
This commit updates the documentation to include the ANALYZE recommendation
for SET EXPRESSION AS.
Since v18, virtual generated columns are supported, and these columns never
have statistics. Therefore, ANALYZE is not needed after SET DATA TYPE or
SET EXPRESSION AS when used on virtual generated columns. This commit also
updates the documentation to clarify that ANALYZE is unnecessary in such cases.
Back-patch the ANALYZE recommendation for SET EXPRESSION AS to v17
where the feature was introduced, and the note about virtual generated
columns to v18 where those columns were added.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/20250804151418.0cf365bd2855d606763443fe@sraoss.co.jp
Backpatch-through: 17
This commit introduces a new column backup_type that indicates the
type of backup being performed: either 'full' or 'incremental'.
Bump catalog version.
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/CAOzEurQuzbHwTj1ehk1a+eeQDidJPyrE5s6mYumkjwjZnurhkQ@mail.gmail.com
We've only bothered converting the external interfaces, not the
endian-dependent internal macros (which should not be used by any
callers other than the interface functions in this header, anyway).
The VARTAG_1B_E() changes are required for C++ compatibility.
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/928ea48f-77c6-417b-897c-621ef16685a6@eisentraut.org
func.sgml has grown over the years to the point where it is very
difficult to manage. This commit splits out each sect1 piece into its
own file, which is then included in the main file, so that the built
documentation should be identical to the pre-split documentation. All
these new files are placed in a new "func" subdirectory, and the
previous func.sgml is removed.
Done using scripts developed by:
Author: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxFgAh1--EMwOjMuANe=VTmjkNaZjH+AzSe04-8ZCGiESA@mail.gmail.com
This name is only used as documentation, and using this name is
consistent with its byte being a 'w'. Renaming it would also make the
use of a symbolic name based on the word "WAL" rather than the obsolete
"XLog" term more consistent, per future commits along the lines of
37c7a7eeb6, 4a68d50088, f4b54e1ed9.
Discussion: https://postgr.es/m/aIECfYfevCUpenBT@nathan
It's possible to use a CHECK (col IS NOT NULL) constraint to skip
scanning a table for nulls when adding a NOT NULL constraint on the same
column. However, if the CHECK constraint is dropped on the same command
that the NOT NULL is added, this fails, i.e., makes the NOT NULL addition
slow. The best we can do about it at this stage is to document this so
that users aren't taken by surprise.
(In Postgres 18 you can directly add the NOT NULL constraint as NOT
VALID instead, so there's no longer much use for the CHECK constraint,
therefore no point in building mechanism to support the case better.)
Reported-by: Andrew <psy2000usa@yahoo.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/175385113607.786.16774570234342968908@wrigleys.postgresql.org
This enhancement builds upon the infrastructure introduced in commit
228c370868, which enables the preservation of deleted tuples and their
origin information on the subscriber. This capability is crucial for
handling concurrent transactions replicated from remote nodes.
The update introduces support for detecting update_deleted conflicts
during the application of update operations on the subscriber. When an
update operation fails to locate the target row-typically because it has
been concurrently deleted-we perform an additional table scan. This scan
uses the SnapshotAny mechanism and we do this additional scan only when
the retain_dead_tuples option is enabled for the relevant subscription.
The goal of this scan is to locate the most recently deleted tuple-matching
the old column values from the remote update-that has not yet been removed
by VACUUM and is still visible according to our slot (i.e., its deletion
is not older than conflict-detection-slot's xmin). If such a tuple is
found, the system reports an update_deleted conflict, including the origin
and transaction details responsible for the deletion.
This provides a groundwork for more robust and accurate conflict
resolution process, preventing unexpected behavior by correctly
identifying cases where a remote update clashes with a deletion from
another origin.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB5716BE80DAEB0EE2A6A5D1F5949D2@OS0PR01MB5716.jpnprd01.prod.outlook.com
It was not very clear that the triggers are only allowed on plain tables
(not foreign tables). Also, rephrase the documentation for better
readability.
Follow up to commit 9e6104c66.
Reported-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAPmGK16XBs9ptNr8Lk4f-tJZogf6y-Prz%3D8yhvJbb_4dpsc3mQ%40mail.gmail.com
Backpatch-through: 13
PostgreSQL always sends the BackendKeyData message at connection
startup, but there are some third party backend implementations out
there that don't support cancellation, and don't send the message
[1]. While the protocol docs left it up for interpretation if that is
valid behavior, libpq in PostgreSQL 17 and below accepted it. It does
not seem like the libpq behavior was intentional though, since it did
so by sending CancelRequest messages with all zeros to such servers
(instead of returning an error or making the cancel a no-op).
In version 18 the behavior was changed to return an error when trying
to create the cancel object with PGgetCancel() or PGcancelCreate().
This was done without any discussion, as part of supporting different
lengths of cancel packets for the new 3.2 version of the protocol.
This commit changes the behavior of PGgetCancel() / PGcancel() once
more to only return an error when the cancel object is actually used
to send a cancellation, instead of when merely creating the object.
The reason to do so is that some clients [2] create a cancel object as
part of their connection creation logic (thus having the cancel object
ready for later when they need it), so if creating the cancel object
returns an error, the whole connection attempt fails. By delaying the
error, such clients will still be able to connect to the third party
backend implementations in question, but when actually trying to
cancel a query, the user will be notified that that is not possible
for the server that they are connected to.
This commit only changes the behavior of the older PGgetCancel() /
PQcancel() functions, not the more modern PQcancelCreate() family of
functions. I.e. PQcancelCreate() returns a failed connection object
(CONNECTION_BAD) if the server didn't send a cancellation key. Unlike
the old PQgetCancel() function, we're not aware of any clients in the
field that use PQcancelCreate() during connection startup in a way
that would prevent connecting to such servers.
[1] AWS RDS Proxy is definitely one of them, and CockroachDB might be
another.
[2] psycopg2 (but not psycopg3).
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Backpatch-through: 18
Discussion: https://www.postgresql.org/message-id/20250617.101056.1437027795118961504.ishii%40postgresql.org
This patch adds two new counters to pg_stat_statements:
- generic_plan_calls
- custom_plan_calls
These counters track how many times a prepared statement was executed
using a generic or custom plan, respectively, providing a global
equivalent at query level, for top and non-top levels, of
pg_prepared_statements whose data is restricted to a single session.
This commit builds upon e125e36002. The module is bumped to version
1.13. PGSS_FILE_HEADER is bumped as well, something that the latest
patches touching the on-disk format of the PGSS file did not actually
bother with since 2022..
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Ilia Evdokimov <ilya.evdokimov@tantorlabs.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Nikolay Samokhvalov <nik@postgres.ai>
Discussion: https://postgr.es/m/CAA5RZ0uFw8Y9GCFvafhC=OA8NnMqVZyzXPfv_EePOt+iv1T-qQ@mail.gmail.com
The sentence in question gave readers the impression that vacuumdb
removes statistics for a period of time while analyzing, but it's
actually meant to convey that --analyze-in-stages temporarily
replaces existing statistics with ones generated with lower
statistics targets.
Reported-by: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Reviewed-by: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Reviewed-by: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/4b94ca16-7a6d-4581-b2aa-4ea79dbc082a%40dalibo.com
Backpatch-through: 18
Recent discussions of the mechanisms used to manage global data have
raised concerns about their robustness and security. Rather than try
to deal with those concerns at a very late stage of the release cycle,
the conclusion is to revert these features and work on them for the
next release.
This reverts parts or all of the following commits:
1495eff7bd Non text modes for pg_dumpall, correspondingly change pg_restore
5db3bf7391 Clean up from commit 1495eff7bd289f74d0cb Add more TAP tests for pg_dumpall
2ef5790806 Fix a couple of error messages and tests for them
b52a4a5f28 Clean up error messages from 1495eff7bd4170298b6e Further cleanup for directory creation on pg_dump/pg_dumpall
22cb6d2895 Fix memory leak in pg_restore.c
928394b664 Improve various new-to-v18 appendStringInfo calls
39729ec01d Fix fat fingering in 22cb6d28955822bf21d5 Add missing space in pg_restore documentation.
f09088a01d Free memory properly in pg_restore.c
40b9c27014 pg_restore cleanups
4aad2cb770 Portability fix: isdigit() must be passed an unsigned char.
88e947136b Fix typos and grammar in the code
f60420cff6 doc: Alphabetize long options for pg_dump[all].
bc35adee8d doc: Put new options in consistent order on man pages
a876464abc Message style improvements
dec6643487 Improve pg_dump/pg_dumpall help synopses and terminology
0ebd242555 Run pgperltidy
Discussion: https://postgr.es/m/20250708212819.09.nmisch@google.com
Backpatch-to: 18
Reviewed-by: Noah Misch <noah@leadboat.com>
This commit documents differences in the definition of word separators for
the initcap function between libc and ICU locale providers.
Backpatch to all supported branches.
Discussion: https://postgr.es/m/804cc10ef95d4d3b298e76b181fd9437%40postgrespro.ru
Author: Oleg Tselebrovskiy <o.tselebrovskiy@postgrespro.ru>
Backpatch-through: 13
This commit adds missing index entries for the functions pg_buffercache_numa()
and pg_buffercache_usage_counts() in the pg_buffercache documentation.
It also makes the function titles consistent by adding parentheses after
function names where they were previously missing.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/7d19af4b-7da3-4862-9f52-ff958960bd8d@oss.nttdata.com
Backpatch-through: 18
Logical replication requires reliable conflict detection to maintain data
consistency across nodes. To achieve this, we must prevent premature
removal of tuples deleted by other origins and their associated commit_ts
data by VACUUM, which could otherwise lead to incorrect conflict reporting
and resolution.
This patch introduces a mechanism to retain deleted tuples on the
subscriber during the application of concurrent transactions from remote
nodes. Retaining these tuples allows us to correctly ignore concurrent
updates to the same tuple. Without this, an UPDATE might be misinterpreted
as an INSERT during resolutions due to the absence of the original tuple.
Additionally, we ensure that origin metadata is not prematurely removed by
vacuum freeze, which is essential for detecting update_origin_differs and
delete_origin_differs conflicts.
To support this, a new replication slot named pg_conflict_detection is
created and maintained by the launcher on the subscriber. Each apply
worker tracks its own non-removable transaction ID, which the launcher
aggregates to determine the appropriate xmin for the slot, thereby
retaining necessary tuples.
Conflict information retention (deleted tuples and commit_ts) can be
enabled per subscription via the retain_conflict_info option. This is
disabled by default to avoid unnecessary overhead for configurations that
do not require conflict resolution or logging.
During upgrades, if any subscription on the old cluster has
retain_conflict_info enabled, a conflict detection slot will be created to
protect relevant tuples from deletion when the new cluster starts.
This is a foundational work to correctly detect update_deleted conflict
which will be done in a follow-up patch.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB5716BE80DAEB0EE2A6A5D1F5949D2@OS0PR01MB5716.jpnprd01.prod.outlook.com
The definition of \dRp+ was modified in commit 7054186c4e. This patch
updates the column list and row filter examples to align with the revised
definition.
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed by: Peter Smith <smithpb2250@gmail.com>
Backpatch-through: 18, where it was introduced
Discussion: https://postgr.es/m/CANhcyEUvqkSO6b9zi_fs_BBPEge5acj4mf8QKmq2TX-7axa7EQ@mail.gmail.com
This index AM callback has been introduced in c1ec02be1d and it is
optional, currently only being used by BRIN. Optional callbacks are
documented with NULL as possible value in amapi.h and indexam.sgml, but
this callback has missed this part of the description.
Reported-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/CAHut+PvgYcPmPDi1YdHMJY5upnyGRpc0N8pk1xNB11xDSBwNog@mail.gmail.com
Backpatch-through: 17
When pg_recvlogical receives a SIGHUP signal, it closes the current
output file and reopens a new one. This is useful since it allows us to
rotate the output file by renaming the current file and sending a SIGHUP.
This behavior was previously undocumented. This commit adds
the missing documentation.
Back-patch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Shinya Kato <shinya11.kato@gmail.com>
Discussion: https://postgr.es/m/0977fc4f-1523-4ecd-8a0e-391af4976367@oss.nttdata.com
Backpatch-through: 13
This commit adds a note to the pg_overexplain page that describes
how to use it (LOAD, session_preload_libraries, or
shared_preload_libraries). The new text is mostly lifted from the
auto_explain page. We should probably consider centralizing this
information in the future.
While at it, add a missing "module" to the opening sentence.
Reviewed-by: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/aHVWKM8l8kLlZzgv%40nathan
Backpatch-through: 18
The paragraph for introducing INSERT and COPY discussed how a file
could be used for bulk loading with COPY, without actually showing
what the file would look like. This adds a programlisting for the
file contents.
Backpatch to all supported branches since this example has lacked
the file contents since PostgreSQL 7.2.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/158017814191.19852.15019251381150731439@wrigleys.postgresql.org
Backpatch-through: 13
Avoid dependence on setlocale().
strcoll(), etc., are not called directly; all collation-sensitive
calls should go through pg_locale.c and use the appropriate
provider. By setting LC_COLLATE to C, we avoid accidentally depending
on libc behavior when using a different provider.
No behavior change in the backend, but it's possible that some
extensions will be affected. Such extensions should be updated to use
the pg_locale_t APIs.
Discussion: https://postgr.es/m/9875f7f9-50f1-4b5d-86fc-ee8b03e8c162@eisentraut.org
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
The pgoutput plugin options are described in the logical streaming
replication protocol documentation, but their default values were
previously not mentioned. This made it less convenient for users,
for example, when specifying those options to use pg_recvlogical
with pgoutput plugin.
This commit adds the explanations of the default values for pgoutput
options to improve clarity and usability.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/d2790f10-238d-4cb5-a743-d9d2a9dd900f@oss.nttdata.com
Previously, the documentation described the streaming option as a boolean,
which is outdated since it's no longer a boolean as of protocol version 4.
This could confuse users.
This commit updates the description to remove the "boolean" reference and
clearly list the valid values for the streaming option.
Back-patch to v16, where the streaming option changed to a non-boolean.
Author: Euler Taveira <euler@eulerto.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/8d21fb98-5c25-4dee-8387-e5a62b01ea7d@app.fastmail.com
Backpatch-through: 16
The last_vacuum and vacuum_count fields in pg_stat_all_tables already
state that they do not include VACUUM FULL. However, total_vacuum_time,
which also excludes VACUUM FULL, did not mention this. This could
mislead users into thinking VACUUM FULL time is included.
To address this, this commit updates the documentation for
pg_stat_all_tables to explicitly state that total_vacuum_time does not
count VACUUM FULL.
Back-patched to v18, where total_vacuum_time was introduced.
Additionally, this commit clarifies that n_ins_since_vacuum also
excludes VACUUM FULL. Although n_ins_since_vacuum was added in v13,
we are not back-patching this change to stable branches, as it is
a documentation improvement, not a bug fix.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/2ac375d1-591b-4f1b-a2af-f24335567866@oss.nttdata.com
Backpatch-through: 18
The grammar was a little shaky and confusing here, so word-smith it
a bit. Also, adjust the comments in pg_ident.conf.sample to use the
same terminology as the SGML docs, in particular "DATABASE-USERNAME"
not "PG-USERNAME".
Back-patch appropriate subsets. I did not risk changing
pg_ident.conf.sample in released branches, but it still seems OK
to change it in v18.
Reported-by: Alexey Shishkin <alexey.shishkin@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/175206279327.3157504.12519088928605422253@wrigleys.postgresql.org
Backpatch-through: 13
Minor wordsmithing of the func.sgml paragraph describing
statement_timestamp() and allied functions: don't switch between
"statement" and "command" when those are being used to mean about
the same thing.
Also, add some text to protocol.sgml describing the perhaps-surprising
behavior these functions have in a multi-statement Query message.
Reported-by: P M <petermittere@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/175223006802.3157505.14764328206246105568@wrigleys.postgresql.org
Backpatch-through: 13
This new psql variable can be used to check which service file has been
used for a connection. Like other variables, this can be set in a
PROMPT or reported by an \echo, like these commands:
\echo :SERVICEFILE
\set PROMPT1 '=(%:SERVICEFILE:)%# '
This relies on commits 092f3c63ef and fef6da9e9c to retrieve this
information from the connection's PQconninfoOption.
Author: Ryo Kanbayashi <kanbayashi.dev@gmail.com>
Discussion: https://postgr.es/m/CAKkG4_nCjx3a_F3gyXHSPWxD8Sd8URaM89wey7fG_9g7KBkOCQ@mail.gmail.com
This commit adds the possibility to specify a service file in a
connection string, using a new option called "servicefile". The parsing
of the service file happens so as things are done in this order of
priority:
- The servicefile connection option.
- Environment variable PGSERVICEFILE.
- Default path, depending on the HOME environment.
Note that in the last default case, we need to fill in "servicefile" for
the connection's PQconninfoOption to let clients know which service file
has been used for the connection. Some TAP tests are added, with a few
tweaks required for Windows when using URIs or connection option values,
for the location paths.
Author: Torsten Förtsch <tfoertsch123@gmail.com>
Co-authored-by: Ryo Kanbayashi <kanbayashi.dev@gmail.com>
Discussion: https://postgr.es/m/CAKkG4_nCjx3a_F3gyXHSPWxD8Sd8URaM89wey7fG_9g7KBkOCQ@mail.gmail.com
This option, which is disabled by default, can be used to request
the checkpoint also flush dirty buffers of unlogged relations. As
with the MODE option, the server may consolidate the options for
concurrently requested checkpoints. For example, if one session
uses (FLUSH_UNLOGGED FALSE) and another uses (FLUSH_UNLOGGED TRUE),
the server may perform one checkpoint with FLUSH_UNLOGGED enabled.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
This option may be set to FAST (the default) to request the
checkpoint be completed as fast as possible, or SPREAD to request
the checkpoint be spread over a longer interval (based on the
checkpoint-related configuration parameters). Note that the server
may consolidate the options for concurrently requested checkpoints.
For example, if one session requests a "fast" checkpoint and
another requests a "spread" checkpoint, the server may perform one
"fast" checkpoint.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
This commit adds the boilerplate code for supporting a list of
options in CHECKPOINT commands. No actual options are supported
yet, but follow-up commits will add support for MODE and
FLUSH_UNLOGGED. While at it, this commit refactors the code for
executing CHECKPOINT commands to its own function since it's about
to become significantly larger.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
The new name more accurately reflects the effects of this flag on a
requested checkpoint. Checkpoint-related log messages (i.e., those
controlled by the log_checkpoints configuration parameter) will now
say "fast" instead of "immediate", too. Likewise, references to
"immediate" checkpoints in the documentation have been updated to
say "fast". This is preparatory work for a follow-up commit that
will add a MODE option to the CHECKPOINT command.
Author: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
In the description of StartupMessage, the protocol version was left
3.0. Instead of just updating it, this commit removes the hard coded
protocol version and shows the numbers as an example. This makes that
the part of the doc does not need to be updated when the version is
changed in the future.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://postgr.es/m/20250626.155608.568829483879866256.ishii%40postgresql.org
This commit updates the documentation to clarify that "idle" in
idle_replication_slot_timeout means the replication slot is inactive,
that is, not currently used by any replication connection.
Without this clarification, "idle" could be misinterpreted to mean
that the slot is not advancing or that no data is being streamed,
even if a connection exists.
Back-patch to v18 where idle_replication_slot_timeout was added.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Gunnar Morling <gunnar.morling@googlemail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CADGJaX_0+FTguWpNSpgVWYQP_7MhoO0D8=cp4XozSQgaZ40Odw@mail.gmail.com
Backpatch-through: 18
Previously, the idle_replication_slot_timeout parameter used minutes
as its unit, based on the assumption that values would typically exceed
one minute in production environments. However, this caused unexpected
behavior: specifying a value below 30 seconds would round down to 0,
effectively disabling the timeout. This could be surprising to users.
To allow finer-grained control and avoid such confusion, this commit changes
the unit of idle_replication_slot_timeout to seconds. Larger values can
still be specified easily using standard time suffixes, for example,
'24h' for 24 hours.
Back-patch to v18 where idle_replication_slot_timeout was added.
Reported-by: Gunnar Morling <gunnar.morling@googlemail.com>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CADGJaX_0+FTguWpNSpgVWYQP_7MhoO0D8=cp4XozSQgaZ40Odw@mail.gmail.com
Backpatch-through: 18
Increase the size of the "direct" histogram to 10K elements,
so that we can precisely track loop times up to 10 microseconds.
(Going further than that seems pretty uninteresting, even for
very old and slow machines.)
Relabel "Per loop time" as "Average loop time" for clarity.
Pre-zero the histogram arrays to make sure that they are loaded
into processor cache and any copy-on-write overhead has happened
before we enter the timing loop. Also use unlikely() to keep
the compiler from thinking that the clock-went-backwards case
is part of the hot loop. Neither of these hacks made a lot of
difference on my own machine, but they seem like they might help
on some platforms.
Discussion: https://postgr.es/m/be0339cc-1ae1-4892-9445-8e6d8995a44d@eisentraut.org
This commit adds a new system view that provides information about
entries in the dynamic shared memory (DSM) registry. Specifically,
it returns the name, type, and size of each entry. Note that since
we cannot discover the size of dynamic shared memory areas (DSAs)
and hash tables backed by DSAs (dshashes) without first attaching
to them, the size column is left as NULL for those.
Bumps catversion.
Author: Florents Tselai <florents.tselai@gmail.com>
Reviewed-by: Sungwoo Chang <swchangdev@gmail.com>
Discussion: https://postgr.es/m/4D445D3E-81C5-4135-95BB-D414204A0AB4%40gmail.com
Clarified that the failover steps apply to a specific PostgreSQL subscriber
and added guidance for verifying replication slot synchronization during
planned failover. Additionally, corrected the standby query to avoid false
positives by checking invalidation_reason IS NULL instead of conflicting.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Author: Shveta Malik <shveta.malik@gmail.com>
Backpatch-through: 17, where it was introduced
Discussion: https://www.postgresql.org/message-id/CAExHW5uiZ-fF159=jwBwPMbjZeZDtmcTbN+hd4mrURLCg2uzJg@mail.gmail.com
This routine has been introduced as a shortcut to be able to retrieve a
service name from an active connection, for psql. Per discussion, and
as it is only used by psql, let's remove it to not clutter the libpq API
more than necessary.
The logic in psql is replaced by lookups of PQconninfoOption for the
active connection, instead, updated each time the variables are synced
by psql, the prompt shortcut relying on the variable synced.
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20250706161319.c1.nmisch@google.com
Backpatch-through: 18
Tom Lane