Most of our platforms have better-than-microsecond timing resolution,
so the original definition of this program is getting less and less
useful. Make it report nanoseconds not microseconds. Also, add a
second output table that reports the exact observed timing durations,
up to a limit of 1024 ns; and be sure to report the largest observed
duration.
The documentation for this program included a lot of system-specific
details that now seem largely obsolete. Move all that text to the
PG wiki, where perhaps it will be easier to maintain and update.
Also, improve the TAP test so that it actually runs a short standard
run, allowing most of the code to be exercised; its coverage before
was abysmal.
Author: Hannu Krosing <hannuk@google.com>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/be0339cc-1ae1-4892-9445-8e6d8995a44d@eisentraut.org
This commit standardizes the output format for LSNs to ensure consistent
representation across various tools and messages. Previously, LSNs were
inconsistently printed as `%X/%X` in some contexts, while others used
zero-padding. This often led to confusion when comparing.
To address this, the LSN format is now uniformly set to `%X/%08X`,
ensuring the lower 32-bit part is always zero-padded to eight
hexadecimal digits.
Author: Japin Li <japinli@hotmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/ME0P300MB0445CA53CA0E4B8C1879AF84B641A@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
Extend the infrastructure in btree_gin.c to permit cross-type
operators, and add the code to support them for the int2, int4,
and int8 opclasses. (To keep this patch digestible, I left
the other datatypes for a separate patch.) This improves the
usability of btree_gin indexes by allowing them to support the
same set of queries that a regular btree index does.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Discussion: https://postgr.es/m/262624.1738460652@sss.pgh.pa.us
The documentation for pg_replication_slots previously mentioned only
max_slot_wal_keep_size as a condition under which the wal_status column
could show unreserved or lost. However, since commit be87200,
replication slots can also be invalidated due to horizon or wal_level,
and since commit ac0e33136a, idle_replication_slot_timeout can also
trigger this state.
This commit updates the description of the wal_status column to
reflect that max_slot_wal_keep_size is not the only cause of the lost state.
Back-patched to v16, where the additional invalidation cases were introduced.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Discussion: https://postgr.es/m/78b34e84-2195-4f28-a151-5d204a382fdd@oss.nttdata.com
Backpatch-through: 16
If certain constraint characteristic clauses (NO INHERIT, NOT VALID, NOT
ENFORCED) are given to CREATE CONSTRAINT TRIGGER, the resulting error
message is
ERROR: TRIGGER constraints cannot be marked NO INHERIT
which is a bit silly, because these aren't "constraints of type
TRIGGER". Hardcode a better error message to prevent it. This is a
cosmetic fix for quite a fringe problem with no known complaints from
users, so no backpatch.
While at it, silently accept ENFORCED if given.
Author: Amul Sul <sulamul@gmail.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CAAJ_b97hd-jMTS7AjgU6TDBCzDx_KyuKxG+K-DtYmOieg+giyQ@mail.gmail.com
Discussion: https://postgr.es/m/CACJufxHSp2puxP=q8ZtUGL1F+heapnzqFBZy5ZNGUjUgwjBqTQ@mail.gmail.com
The documentation previously stated that the wal_status column is NULL
if restart_lsn is NULL in the pg_replication_slots view. This is incorrect,
and wal_status can be "lost" even when restart_lsn is NULL.
This commit removes the incorrect description.
Back-patched to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Discussion: https://postgr.es/m/c9d23cdc-b5dd-455a-8ee9-f1f24d701d89@oss.nttdata.com
Backpatch-through: 13
The COPY FROM command now accepts a non-negative integer for the HEADER option,
allowing multiple header lines to be skipped. This is useful when the input
contains multi-line headers that should be ignored during data import.
Author: Shinya Kato <shinya11.kato@gmail.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/CAOzEurRPxfzbxqeOPF_AGnAUOYf=Wk0we+1LQomPNUNtyZGBZw@mail.gmail.com
The previous minimum was to maintain support for Python 3.5, but we
now require Python 3.6 anyway (commit 45363fca63), so that reason is
obsolete. A small raise to Meson 0.57 allows getting rid of a fair
amount of version conditionals and silences some future-deprecated
warnings.
With the version bump, the following deprecation warnings appeared and
are fixed:
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.55.0': ExternalProgram.path. use ExternalProgram.full_path() instead
WARNING: Project targets '>=0.57' but uses feature deprecated since '0.56.0': meson.build_root. use meson.project_build_root() or meson.global_build_root() instead.
It turns out that meson 0.57.0 and 0.57.1 are buggy for our use, so
the minimum is actually set to 0.57.2. This is specific to this
version series; in the future we won't necessarily need to be this
precise.
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/42e13eb0-862a-441e-8d84-4f0fd5f6def0%40eisentraut.org
Switch MSVC to use the conforming preprocessor, using the
/Zc:preprocessor option.
This allows us to drop the alternative implementation of
VA_ARGS_NARGS() for the previous "traditional" preprocessor.
This also prepares the way for enabling C11 mode in the future, which
enables the conforming preprocessor by default.
This now requires Visual Studio 2019. The installation documentation
is adjusted accordingly.
Discussion: https://www.postgresql.org/message-id/flat/01a69441-af54-4822-891b-ca28e05b215a%40eisentraut.org
This provides a convenient way to look up a database's OID. For
example, the query
SELECT * FROM pg_shdepend
WHERE dbid = (SELECT oid FROM pg_database
WHERE datname = current_database());
can now be simplified to
SELECT * FROM pg_shdepend
WHERE dbid = current_database()::regdatabase;
Like the regrole type, regdatabase has cluster-wide scope, so we
disallow regdatabase constants from appearing in stored
expressions.
Bumps catversion.
Author: Ian Lawrence Barwick <barwick@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/aBpjJhyHpM2LYcG0%40nathan
When postfix operators where dropped in 1ed6b8956, the CREATE OPERATOR
docs were not updated to make the RIGHTARG argument mandatory in the
grammar.
While at it, make the RIGHTARG docs more concise. Also, the operator
docs were mentioning "infix" in the introduction, while using "binary"
everywhere else.
Author: Christoph Berg <myon@debian.org>
Discussion: https://www.postgresql.org/message-id/flat/aAtpbnQphv4LWAye@msg.df7cb.de
Commit 1546e17f9d accidentally misspelled additionally as
additionaly. Backpatch to v17 to match where the original
commit was backpatched.
Author: Daniel Gustafsson <daniel@yesql.se>
Backpatch-through: 17
This commit renames the pg_recvlogical options --two-phase and
--failover to --enable-two-phase and --enable-failover, respectively.
The new names distinguish these enabling options from action options
like --start and --create-slot, while clearly indicating their purpose
to enable specific logical slot features.
The option --failover is new in PostgreSQL 18 (commit cf2655a902), so
no compatibility break there. The option --two-phase has existed
since PostgreSQL 15 (commit cda03cfed6), so for compatibility we keep
the old option name --two-phase around as deprecated.
Also note that pg_createsubscriber has acquired an --enable-two-phase
option, so this increases consistency across tools.
Co-authored-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/a28f66df-1354-4709-8d63-932ded4cac35@eisentraut.org
We were missing collecting comments for not-null constraints that are
dumped inline with the table definition (i.e., valid ones), because they
aren't represented by a separately dumpable object. Fix by creating
separate TocEntries for the comments.
Co-Authored-By: Jian He <jian.universality@gmail.com>
Co-Authored-By: Álvaro Herrera <alvherre@kurilemu.de>
Reported-By: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-By: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/d50ff977-c728-4e9e-8488-fc2688e08754@oss.nttdata.com
The convention in the documentation for other SQL commands is to
indent continuation lines and sub-clauses in the "Synopsis" section by
4 spaces, so do the same for MERGE.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/CAEZATCV+9tR9+WM-SCcdBEZ3x7WVxUpADD5jX9WeGX97z4LCGA@mail.gmail.com
Backpatch-through: 15
Just like selecting from a view is exploitable (CVE-2024-7348),
selecting from a table with virtual generated columns is exploitable.
Users who are concerned about this can avoid selecting from views, but
telling them to avoid selecting from tables is less practical.
To address this, this changes it so that generation expressions for
virtual generated columns are restricted to using built-in functions
and types, and the columns are restricted to having a built-in type.
We assume that built-in functions and types cannot be exploited for
this purpose.
In the future, this could be expanded by some new mechanism to declare
other functions and types as safe or trusted for this purpose, but
that is to be designed.
(An alternative approach might have been to expand the
restrict_nonsystem_relation_kind GUC to handle this, like the fix for
CVE-2024-7348. But that is kind of an ugly approach. That fix had to
fit in the constraints of fixing an ancient vulnerability in all
branches. Since virtual generated columns are new, we're free from
the constraints of the past, and we can and should use cleaner
options.)
Reported-by: Feike Steenbergen <feikesteenbergen@gmail.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAK_s-G2Q7de8Q0qOYUR%3D_CTB5FzzVBm5iZjOp%2BmeVWpMpmfO0w%40mail.gmail.com
Protocol v4 introduces parallel streaming, which allows Stream Abort
messages to include additional abort information such as LSN and
timestamp. However, the current documentation only states, "This field is
available since protocol version 4," which may misleadingly suggest that
the fields are always present when using protocol v4.
This patch clarifies that the abort LSN and timestamp are included only
when parallel streaming is enabled, even under protocol v4.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16, where it was introduced
Discussion: https://postgr.es/m/CAO6_XqoKteQR1AnaR8iPcegbBE+HkAc2-g12rxN04yOt4-2ORg@mail.gmail.com
The documentation previously described the type of the io_workers GUC
parameter as "int". However, the documentation consistently uses "integer"
for parameters of this type.
This commit updates the type description of io_workers to "integer"
for consistency with other GUC parameter descriptions.
Author: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/e95c899a-2aeb-45b7-8fd3-7a27dcdb475b@oss.nttdata.com
The documentation for track_cost_delay_timing describes where cost-based
vacuum delay timing information is displayed when the setting is enabled.
While this information is also shown in the output of ANALYZE VERBOSE,
that was previously omitted from the list.
This commit updates the documentation to include ANALYZE VERBOSE in the list,
clarifying that it also reports cost-based delay timing information.
Author: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/e95c899a-2aeb-45b7-8fd3-7a27dcdb475b@oss.nttdata.com
For parameters that exist as both configuration and storage options,
the documentation typically includes secondary index entries to
help users distinguish and locate the relevant references easily.
However, such index entries were missing for vacuum_truncate and
vacuum_max_eager_freeze_failure_rate, both introduced in v18.
This commit adds appropriate secondary index terms for these parameters
to ensure consistency with other parameters and improve usability of
the documentation index.
Author: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/e95c899a-2aeb-45b7-8fd3-7a27dcdb475b@oss.nttdata.com
The link returns 404 and no replacement is available in the project
on Sourceforge where the content once was. Since we already link to
resources for both beginner and experienced docs hackers, remove the
the dead link.
Backpatch to all supported versions as the link was added in 8.1.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reported-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxH=YzQPDOe+2WuYZ7seD-BOyjCBmP6JiErpoSiVZWDRnw@mail.gmail.com
Backpatch-through: 13
Previously, the UUID functions documentation defined the "UUID" index entry
to link to the UUID data type page, even though that entry already exists there.
Instead, the UUID functions page should define its own index entry linking
to itself.
This commit updates the UUID index entry in the UUID functions documentation
to point to the correct section, improving navigation and avoiding duplication.
Back-patch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/f33e0493-5773-4296-87c5-7ce459054cfe@oss.nttdata.com
Backpatch-through: 13
\close has been introduced in d55322b0da to be able to close a
prepared statement using the extended protocol in psql. Per discussion,
the name "close" is ambiguous. At the SQL level, CLOSE is used to close
a cursor. At protocol level, the close message can be used to either
close a statement or a portal.
This patch renames \close to \close_prepared to avoid any ambiguity and
make it clear that this is used to close a prepared statement. This new
name has been chosen based on the feedback from the author and the
reviewers.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/3e694442-0df5-4f92-a08f-c5d4c4346b85@eisentraut.org
Specify whether the bucket bounds are inclusive or exclusive,
and improve some other vague language. Explain the behavior that
occurs when the "low" bound is greater than the "high" bound.
Make width_bucket_numeric's comment more like that for
width_bucket_float8, in particular noting that infinite
bounds are rejected (since they became possible in v14).
Reported-by: Ben Peachey Higdon <bpeacheyhigdon@gmail.com>
Author: Robert Treat <rob@xzilla.net>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/2BD74F86-5B89-4AC1-8F13-23CED3546AC1@gmail.com
Backpatch-through: 13
In version 17 we added support for cross-partition EXCLUDE
constraints, as long as they included all partition key columns and
compared them with equality (see 8c852ba9a4). I updated the docs for
exclusion constraints, but I missed that the docs for CREATE TABLE
still said that they were not supported. This commit fixes that.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Co-authored-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/c955d292-b92d-42d1-a2a0-1ec6715a2546@illuminatedcomputing.com
Backpatch-through: 17
Increase consistency of --help and man page synopses between pg_dump
and pg_dumpall. These should now be very similar, as pg_dumpall can
now also produce non-text dump output. But actually, they had drifted
further apart.
- Use verb "export" consistently, instead of "dump" or "extract".
- Use "SQL script" instead of just "script" or "text file".
- Maintain consistent distinction between SQL script and other
formats/archives (which is relevant for pg_restore).
Reviewed-by: Robert Treat <rob@xzilla.net>
Discussion: https://www.postgresql.org/message-id/flat/3f71d8a7-095b-4829-9b0b-fce09e9866b3%40eisentraut.org
Improve the clarity of LOG messages when a failover logical slot
synchronization fails, making the reasons more explicit for easier
debugging.
Update the documentation to outline scenarios where slot synchronization
can fail, especially during the initial sync, and emphasize that
pg_sync_replication_slot() is primarily intended for testing and
debugging purposes.
We also discussed improving the functionality of
pg_sync_replication_slot() so that it can be used reliably, but we would
take up that work for next version after some more discussion and review.
Reported-by: Suraj Kharage <suraj.kharage@enterprisedb.com>
Author: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/CAF1DzPWTcg+m+x+oVVB=y4q9=PYYsL_mujVp7uJr-_oUtWNGbA@mail.gmail.com
Commit 8492feb98f added support for parallel CREATE INDEX on GIN indexes.
However, previously two places in the documentation and two in the source
code comments still stated that only B-tree and BRIN indexes support
parallel builds.
This commit updates those references to correctly include GIN indexes.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Discussion: https://postgr.es/m/7d27d068-90e2-4022-9bd7-09b0fd3d4f47@oss.nttdata.com
Commit 302cf15759 added support for LIKE in CREATE FOREIGN TABLE.
In this feature, since indexes are not created for foreign tables,
comments on indexes are not copied either.
However, the documentation incorrectly stated that index comments
would be copied when using INCLUDING COMMENTS. This commit
corrects that by removing the mention of index comments.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/f86cd84f-a6a3-4451-bae7-5cca9e63b06d@oss.nttdata.com
I thought underscores wouldn't even work in "id"s, so I never checked to
see if anything referenced it, but it seems it does work, so adjust the
calling site for the dash syntax.
Commit 1fd1bd8710 introduced support for dumping statistics with
pg_dump and pg_dumpall, covering tables, materialized views, and indexes.
However, it overlooked foreign tables, even though functions like
pg_restore_relation_stats() support them.
This commit fixes that oversight by allowing pg_dump and pg_dumpall
to include statistics for foreign tables.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/3772e4e4-ef39-4deb-bb76-aa8165f33fb6@oss.nttdata.com
Álvaro Herrera