Add a TAP test for sepgsql. This automates the previously required
manual setup before the test. The actual tests are still run by
pg_regress, as before, but now called from within the TAP Perl script.
The previous manual test script (test_sepgsql) is left in place, since
its purpose is (also) to test whether a running instance was properly
initialized for sepgsql. But it has been changed to call pg_regress
directly and no longer require make.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://www.postgresql.org/message-id/flat/651a5baf-5c45-4a5a-a202-0c8453a4ebf8@eisentraut.org
With deferred triggers, it is possible that the current role changes
between the time when the trigger is queued and the time it is
executed (for example, the triggering data modification could have
been executed in a SECURITY DEFINER function).
Up to now, deferred trigger functions would run with the current role
set to whatever was active at commit time. That does not matter for
foreign-key constraints, whose correctness doesn't depend on the
current role. But for user-written triggers, the current role
certainly can matter.
Hence, fix things so that AFTER triggers are fired under the role
that was active when they were queued, matching the behavior of
BEFORE triggers which would have actually fired at that time.
(If the trigger function is marked SECURITY DEFINER, that of course
overrides this, as it always has.)
This does not create any new security exposure: if you do DML on a
table owned by a hostile user, that user has always had various ways
to exploit your permissions, such as the aforementioned BEFORE
triggers, default expressions, etc. It might remove some security
exposure, because the old behavior could potentially expose some
other role besides the one directly modifying the table.
There was discussion of making a larger change, such as running as
the trigger's owner. However, that would break the common idiom of
capturing the value of CURRENT_USER in a trigger for auditing/logging
purposes. This change will make no difference in the typical scenario
where the current role doesn't change before commit.
Arguably this is a bug fix, but it seems too big a semantic change
to consider for back-patching.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://postgr.es/m/77ee784cf248e842f74588418f55c2931e47bd78.camel@cybertec.at
This feature was intentionally omitted when FKs were first implemented
for partitioned tables, and had been requested a few times; the
usefulness is clear.
Validation can happen for each partition individually, which is useful
to contain the number of locks held and the duration; or it can be
executed for the partitioning hierarchy as a single command, which
validates all child constraints that haven't been validated already.
This is also useful to implement NOT ENFORCED constraints on top.
Author: Amul Sul <sulamul@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b96Bp=-ZwihPPtuaNX=SrZ0U6ZsXD3+fgARO0JuKa8v2jQ@mail.gmail.com
The current boolean publish_generated_columns option only supports a
binary choice, which is insufficient for future enhancements where
generated columns can be of different types (e.g., stored or virtual). The
supported values for the publish_generated_columns option are 'none' and
'stored'.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/d718d219-dd47-4a33-bb97-56e8fc4da994@eisentraut.org
Discussion: https://postgr.es/m/B80D17B2-2C8E-4C7D-87F2-E5B4BE3C069E@gmail.com
We've long had roman-numeral output support in to_char(),
but lacked the reverse conversion. Here it is.
Author: Hunaid Sohail <hunaidpgml@gmail.com>
Reviewed-by: Maciek Sakrejda <m.sakrejda@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CAMWA6ybh4M1VQqpmnu2tfSwO+3gAPeA8YKnMHVADeB=XDEvT_A@mail.gmail.com
For the purposes of this discussion, row_number() is just as good
as rank(), and its behavior is easier to understand and describe.
So let's switch the examples to using row_number().
Along the way to checking the results given in the tutorial,
I found it helpful to extract the empsalary table we use in the
regression tests, which is evidently the same data that was used
to make these results. So I shoved that into advanced.source
to improve the coverage of that file a little. (There's still
several pages of the tutorial that are not included in it,
but at least now 3.5 Window Functions is covered.)
Suggested-by: "David G. Johnston" <david.g.johnston@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/173737973383.1070.1832752929070067441@wrigleys.postgresql.org
The PG_UNICODE_FAST locale uses code point sort order (fast,
memcmp-based) combined with Unicode character semantics. The character
semantics are based on Unicode full case mapping.
Full case mapping can map a single codepoint to multiple codepoints,
such as "ß" uppercasing to "SS". Additionally, it handles
context-sensitive mappings like the "final sigma", and it uses
titlecase mappings such as "Dž" when titlecasing (rather than plain
uppercase mappings).
Importantly, the uppercasing of "ß" as "SS" is specifically mentioned
by the SQL standard. In Postgres, UCS_BASIC uses plain ASCII semantics
for case mapping and pattern matching, so if we changed it to use the
PG_UNICODE_FAST locale, it would offer better compliance with the
standard. For now, though, do not change the behavior of UCS_BASIC.
Discussion: https://postgr.es/m/ddfd67928818f138f51635712529bc5e1d25e4e7.camel@j-davis.com
Discussion: https://postgr.es/m/27bb0e52-801d-4f73-a0a4-02cfdd4a9ada@eisentraut.org
Reviewed-by: Peter Eisentraut, Daniel Verite
This topic wasn't really covered before, so fill in some details.
Author: Florents Tselai <florents.tselai@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/90853055-5BBD-493D-91E5-721677C7C59B@gmail.com
Remove the flex version checks from configure and meson. The cutoff
versions are all so ancient that this is no longer relevant, and what
the actual cutoff should be is a bit fuzzy.
This also removes the ancient behavior that configure would also
accept a "lex" program if it is actuall flex. This aligns the check
with meson in this respect.
For future reference, as of this commit, these are relevant flex
versions:
- The hard required minimum is flex 2.5.34 as of commit b1ef48980d,
but this has not actually been tested.
- Prior to this, the minimum enforced by configure/meson was flex
2.5.35, which is the oldest present in the buildfarm right now.
- As of commit 6fdd5d9563, the oldest version that will compile
without warnings due to flex-generated code is flex 2.5.36.
- The oldest version that probably still has some practical relevance
is flex 2.5.37, which ships with CentOS/RHEL 7.
Discussion: https://www.postgresql.org/message-id/1a204ccd-7ae6-478c-a431-407b5c48ccc6@eisentraut.org
If a time zone abbreviation used in datetime input is defined in
the currently active timezone, use that definition in preference
to looking in the timezone_abbreviations list. That allows us to
correctly handle abbreviations that have different meanings in
different timezones. Also, it eliminates an inconsistency between
datetime input and datetime output: the non-ISO datestyles for
timestamptz have always printed abbreviations taken from the IANA
data, not from timezone_abbreviations. Before this fix, it was
possible to demonstrate cases where casting a timestamp to text
and back fails or changes the value significantly because of that
inconsistency.
While this change removes the ability to override the IANA data about
an abbreviation known in the current zone, it's not clear that there's
any real use-case for doing so. But it is clear that this makes life
a lot easier for dealing with abbreviations that have conflicts across
different time zones.
Also update the pg_timezone_abbrevs view to report abbreviations
that are recognized via the IANA data, and *not* report any
timezone_abbreviations entries that are thereby overridden.
Under the hood, there are now two SRFs, one that pulls the IANA
data and one that pulls timezone_abbreviations entries. They're
combined by logic in the view. This approach was useful for
debugging (since the functions can be called on their own).
While I don't intend to document the functions explicitly,
they might be useful to call directly.
Also improve DecodeTimezoneAbbrev's caching logic so that it can
cache zone abbreviations found in the IANA data. Without that,
this patch would have caused a noticeable degradation of the
runtime of timestamptz_in.
Per report from Aleksander Alekseev and additional investigation.
Discussion: https://postgr.es/m/CAJ7c6TOATjJqvhnYsui0=CO5XFMF4dvTGH+skzB--jNhqSQu5g@mail.gmail.com
This allows the RETURNING list of INSERT/UPDATE/DELETE/MERGE queries
to explicitly return old and new values by using the special aliases
"old" and "new", which are automatically added to the query (if not
already defined) while parsing its RETURNING list, allowing things
like:
RETURNING old.colname, new.colname, ...
RETURNING old.*, new.*
Additionally, a new syntax is supported, allowing the names "old" and
"new" to be changed to user-supplied alias names, e.g.:
RETURNING WITH (OLD AS o, NEW AS n) o.colname, n.colname, ...
This is useful when the names "old" and "new" are already defined,
such as inside trigger functions, allowing backwards compatibility to
be maintained -- the interpretation of any existing queries that
happen to already refer to relations called "old" or "new", or use
those as aliases for other relations, is not changed.
For an INSERT, old values will generally be NULL, and for a DELETE,
new values will generally be NULL, but that may change for an INSERT
with an ON CONFLICT ... DO UPDATE clause, or if a query rewrite rule
changes the command type. Therefore, we put no restrictions on the use
of old and new in any DML queries.
Dean Rasheed, reviewed by Jian He and Jeff Davis.
Discussion: https://postgr.es/m/CAEZATCWx0J0-v=Qjc6gXzR=KtsdvAE7Ow=D=mu50AgOe+pvisQ@mail.gmail.com
This enables SCRAM authentication for postgres_fdw when connecting to
a foreign server without having to store a plain-text password on user
mapping options.
This is done by saving the SCRAM ClientKey and ServeryKey from the
client authentication and using those instead of the plain-text
password for the server-side SCRAM exchange. The new foreign-server
or user-mapping option "use_scram_passthrough" enables this.
Co-authored-by: Matheus Alcantara <mths.dev@pm.me>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/27b29a35-9b96-46a9-bc1a-914140869dac@gmail.com
This changes commit 7406ab623f in that the gist strategy number
mapping support function is changed to use the CompareType enum as
input, instead of the "well-known" RT*StrategyNumber strategy numbers.
This is a bit cleaner, since you are not dealing with two sets of
strategy numbers. Also, this will enable us to subsume this system
into a more general system of using CompareType to define operator
semantics across index methods.
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
This allows "x" to be appended to any psql list-like meta-command,
forcing its output to be displayed in expanded mode. This improves
readability in cases where the output is very wide. For example,
"\dfx+" (or equivalently "\df+x") will produce a list of functions,
with additional details, in expanded mode.
This works with all \d* meta-commands, plus \l, \z, and \lo_list, with
the one exception that the expanded mode option "x" cannot be appended
to "\d" by itself, since "\dx" already means something else.
Dean Rasheed, reviewed by Greg Sabino Mullane.
Discussion: https://postgr.es/m/CAEZATCVXJk3KsmCncf7PAVbxdDAUDm3QzDgGT7mBYySWikuOYw@mail.gmail.com
This allows users to determine whether particular functions are
leakproof, and whether the underlying functions used by operators and
casts are leakproof. This is useful to determine whether indexes can
be used in queries on security barrier views or tables with row-level
security policies.
Yugo Nagata, reviewed by Erik Wienhold and Dean Rasheed.
Discussion: https://postgr.es/m/20240701220817.483f9b645b95611f8b1f65da%40sranhm.sraoss.co.jp
Currently in pg_stat_io view, IOs are counted as blocks of size
BLCKSZ. There are two limitations with this design:
* The actual number of I/O requests sent to the kernel is lower because
I/O requests may be merged before being sent. Additionally, it gives
the impression that all I/Os are done in block size, which shadows the
benefits of merging I/O requests.
* Some patches are under work to extend pg_stat_io for the tracking of
operations that may not be linked to the block size. For example, WAL
read IOs are done in variable bytes and it is not possible to correctly
show these IOs in pg_stat_io view, and we want to keep all this data in
a single system view rather than spread it across multiple relations to
ease monitoring.
WaitReadBuffers() can now be tracked as a single read operation
worth N blocks. Same for ExtendBufferedRelShared() and
ExtendBufferedRelLocal() for extensions.
Three columns are added to pg_stat_io for reads, writes and extensions
for the byte calculations. op_bytes, which was always hardcoded to
BLCKSZ, is removed. IO backend statistics are updated to reflect these
changes.
Bump catalog version.
Author: Nazir Bilal Yavuz
Reviewed-by: Bertrand Drouvot, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ0oqxBaaHAEsj=xFqkzE3n5P=3RA1V_igXwL-RV7QRzyw@mail.gmail.com
This adds support for the NOT ENFORCED/ENFORCED flag for constraints,
with support for check constraints.
The plan is to eventually support this for foreign key constraints,
where it is typically more useful.
Note that CHECK constraints do not currently support ALTER operations,
so changing the enforceability of an existing constraint isn't
possible without dropping and recreating it. This could be added
later.
Author: Amul Sul <amul.sul@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Tested-by: Triveni N <triveni.n@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b962c5AcYW9KUt_R_ER5qs3fUGbe4az-SP-vuwPS-w-AGA@mail.gmail.com
GUCs related to vacuum's freezing behavior were documented in a
subsection of the Client Connection Defaults documentation. These GUCs
don't belong there, as they affect the freezing behavior of all vacuums
-- including autovacuums.
There wasn't a clear alternative location, so this commit makes a new
"Server Configuration" docs subsection, "Vacuuming", with a subsection
for "Freezing". It also moves the "Automatic Vacuuming" subsection and
the docs on GUCs controlling cost-based vacuum delay under the new
"Vacuuming" subsection.
The other vacuum-related GUCs under the "Resource Consumption"
subsection have been left in their current location, as they seem to fit
there.
The GUCs' documentation was largely lifted and shifted. The only
modification made was the addition of a few missing <literal> tags.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/flat/CAAKRu_aQUOaMYrcjNuXeSkJtaX9oRUzKP57bsYbC0gVVWS%2BcbA%40mail.gmail.com
Harden hstore_plperl, hstore_plpython, and ltree_plpython
against search-path-based attacks by using @extschema:name@
notation to refer to the underlying hstore or ltree data type.
This allows removal of the previous documentation warning
suggesting that they must be installed in the same schema as
the underlying data type. In passing, also improve a para in
extend.sgml to suggest using @extschema:name@ for such purposes.
Discussion: https://postgr.es/m/692480.1736021695@sss.pgh.pa.us
The synchronous_standby_names GUC allows specifying num_sync,
the number of synchronous standbys transactions must wait for
replies from. This value must be an integer greater than zero.
This commit updates the documentation to clarify this requirement.
Reported-by: Asphator <asphator@gmail.com>
Discussion: https://postgr.es/m/18663-b02f75cb919f1b60@postgresql.org
This new parameter can be used to change the minimum allowed
password length (in bytes). Note that it has no effect if a user
supplies a pre-encrypted password.
Author: Emanuele Musella, Maurizio Boriani
Reviewed-by: Tomas Vondra, Bertrand Drouvot, Japin Li
Discussion: https://postgr.es/m/CA%2BugDNyYtHOtWCqVD3YkSVYDWD_1fO8Jm_ahsDGA5dXhbDPwrQ%40mail.gmail.com
Commit c758119e5b increased the default number of semaphores
required for autovacuum workers from 3 to 16. Unfortunately, some
systems have very low default settings for SEMMNS, and this change
moved the minimum required for Postgres well beyond that limit (see
commit 38da053463 for more details).
With this commit, initdb will lower the default value for
autovacuum_worker_slots as needed, just like it already does for
parameters such as max_connections and shared_buffers. We test
for (max_connections / 6) slots, which conveniently has the
following properties:
* For the initial max_connections default of 100, the default of
autovacuum_worker_slots will be 16, which is its initial default
value specified in the documentation and in guc_tables.c.
* For the lowest possible max_connections default of 25, the
default of autovacuum_worker_slots will be 4, which means we only
need one additional semaphore for autovacuum workers (as compared
to before commit c758119e5b). This leaves some wiggle room for
new auxiliary workers, etc. on systems with low SEMMNS, and it
ensures that the default number of slots will be greater than or
equal to the default value of autovacuum_max_workers (3).
Reported-by: Tom Lane
Suggested-by: Andres Freund
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1346002.1736198977%40sss.pgh.pa.us
This commit introduces a new parameter named
autovacuum_worker_slots that controls how many autovacuum worker
slots to reserve during server startup. Modifying this new
parameter's value does require a server restart, but it should
typically be set to the upper bound of what you might realistically
need to set autovacuum_max_workers. With that new parameter in
place, autovacuum_max_workers can now be changed with a SIGHUP
(e.g., pg_ctl reload).
If autovacuum_max_workers is set higher than
autovacuum_worker_slots, a WARNING is emitted, and the server will
only start up to autovacuum_worker_slots workers at a given time.
If autovacuum_max_workers is set to a value less than the number of
currently-running autovacuum workers, the existing workers will
continue running, but no new workers will be started until the
number of running autovacuum workers drops below
autovacuum_max_workers.
Reviewed-by: Sami Imseih, Justin Pryzby, Robert Haas, Andres Freund, Yogesh Sharma
Discussion: https://postgr.es/m/20240410212344.GA1824549%40nathanxps13
VERBOSE messages from ANALYZE, CLUSTER, REINDEX, and VACUUM are logged
at the INFO level, but this detail was missing from the documentation.
This commit updates the docs to mention the log level for these messages.
Author: Masahiro Ikeda
Reviewed-by: Yugo Nagata
Discussion: https://postgr.es/m/b4a4b7916982dccd9607c8efb3ce5116@oss.nttdata.com
Slightly faulty logic in the original jsonb code (commit d9134d0a35)
results in an empty top level array sorting less than a json null. We
can't change the sort order now since it would affect btree indexes over
jsonb, so document the anomaly.
Backpatch to all live branches (13 .. 17)
In master, also add a code comment noting the anomaly.
Reported-by: Yan Chengpen
Reviewed-by: Jian He
Discussion: https://postgr.es/m/OSBPR01MB45199DD8DA2D1CECD50518188E272@OSBPR01MB4519.jpnprd01.prod.outlook.com
These two platforms have a remarkably tight default limit on the
number of SysV semaphores in the system: SEMMNS is only 60
out-of-the-box. Unless manual action is taken to raise that,
we'll only be able to allocate 3 sets of 16 usable semaphores
each, leading to initdb setting max_connections to just 20.
That's problematic because the core regression tests expect
to be able to launch 20 concurrent sessions, leaving us with
no headroom. This seems to be the cause of intermittent
buildfarm failures on some machines.
While there's no getting around the fact that you'd better raise
SEMMNS for production use on these platforms, it does seem desirable
for "make check" to pass reliably without that. We can make that
happen, at least for awhile longer, with two small changes:
* Change sysv_sema.c's SEMAS_PER_SET to 19, so that we can eat up
all of the available semas not just most of them.
* Change initdb to make the smallest max_connections value it will
consider be 25 not 20.
As of HEAD this will leave us with four free semaphores (using the
default values for other relevant parameters such as max_wal_senders).
So we won't need to consider this again until we've invented five
more background processes. Maybe by then we can switch both these
platforms to some other semaphore API.
For the moment, do this only in master; there've not been field
complaints that might justify a back-patch.
Discussion: https://postgr.es/m/db2773a2-aca0-43d0-99c1-060efcd9954e@gmail.com
This adds a new variable-numbered statistics kind in pgstats, where the
object ID key of the stats entries is based on the proc number of the
backends. This acts as an upper-bound for the number of stats entries
that can exist at once. The entries are created when a backend starts
after authentication succeeds, and are removed when the backend exits,
making the stats entry exist for as long as their backend is up and
running. These are not written to the pgstats file at shutdown (note
that write_to_file is disabled, as a safety measure).
Currently, these stats include only information about the I/O generated
by a backend, using the same layer as pg_stat_io, except that it is now
possible to know how much activity is happening in each backend rather
than an overall aggregate of all the activity. A function called
pg_stat_get_backend_io() is added to access this data depending on the
PID of a backend. The existing structure could be expanded in the
future to add more information about other statistics related to
backends, depending on requirements or ideas.
Auxiliary processes are not included in this set of statistics. These
are less interesting to have than normal backends as they have dedicated
entries in pg_stat_io, and stats kinds of their own.
This commit includes also pg_stat_reset_backend_stats(), function able
to reset all the stats associated to a single backend.
Bump catalog version and PGSTAT_FILE_FORMAT_ID.
Author: Bertrand Drouvot
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, Michael Paquier, Nazir
Bilal Yavuz
Discussion: https://postgr.es/m/ZtXR+CtkEVVE/LHF@ip-10-97-1-34.eu-west-3.compute.internal
This commit adds support for the following items in psql, able to show a
service name, when available:
- Variable SERVICE.
- Substitution %s in PROMPT{1,2,3}.
This relies on 4b99fed754, that has made the service name available in
PGconn for libpq.
Author: Michael Banck
Reviewed-by: Greg Sabino Mullane
Discussion: https://postgr.es/m/6723c612.050a0220.1567f4.b94a@mx.google.com
This commit adds one field to PGconn for the database service name (if
any), with PQservice() as routine to retrieve it. Like the other
routines of this area, NULL is returned as result if the connection is
NULL.
A follow-up patch will make use of this feature to be able to display
the service name in the psql prompt.
Author: Michael Banck
Reviewed-by: Greg Sabino Mullane
Discusion: https://postgr.es/m/6723c612.050a0220.1567f4.b94a@mx.google.com
Two places in the documentation suggest B-tree is the only index access
method allowing parallel builds. Commit b4375717 added parallel builds
for BRIN too, but failed to update the docs. So fix that, and backpatch
to 17, where parallel BRIN builds were introduced.
Author: Egor Rogov
Backpatch-through: 17
Discussion: https://postgr.es/m/114e2d5d-125e-07d8-94aa-5ad175fb7443@postgrespro.ru
The documentation in wal.sgml explains that old WAL files cannot be
removed or recycled until they are archived (when WAL archiving is used)
or replicated (when using replication slots). However, it did not mention
that, similarly, old WAL files are also kept until they are summarized
if WAL summarization is enabled. This commit adds that clarification
to the documentation.
Back-patch to v17 where WAL summarization was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/fd0eb0a5-f43b-4e06-b450-cbca011b6cff@oss.nttdata.com
This commit introduces the uuidv7() SQL function, which generates UUID
version 7 as specified in RFC 9652. UUIDv7 combines a Unix timestamp
in milliseconds and random bits, offering both uniqueness and
sortability.
In our implementation, the 12-bit sub-millisecond timestamp fraction
is stored immediately after the timestamp, in the space referred to as
"rand_a" in the RFC. This ensures additional monotonicity within a
millisecond. The rand_a bits also function as a counter. We select a
sub-millisecond timestamp so that it monotonically increases for
generated UUIDs within the same backend, even when the system clock
goes backward or when generating UUIDs at very high
frequency. Therefore, the monotonicity of generated UUIDs is ensured
within the same backend.
This commit also expands the uuid_extract_timestamp() function to
support UUID version 7.
Additionally, an alias uuidv4() is added for the existing
gen_random_uuid() SQL function to maintain consistency.
Bump catalog version.
Author: Andrey Borodin
Reviewed-by: Sergey Prokhorenko, Przemysław Sztoch, Nikolay Samokhvalov
Reviewed-by: Peter Eisentraut, Jelte Fennema-Nio, Aleksander Alekseev
Reviewed-by: Masahiko Sawada, Lukas Fittl, Michael Paquier, Japin Li
Reviewed-by: Marcos Pegoraro, Junwang Zhao, Stepan Neretin
Reviewed-by: Daniel Vérité
Discussion: https://postgr.es/m/CAAhFRxitJv%3DyoGnXUgeLB_O%2BM7J2BJAmb5jqAT9gZ3bij3uLDA%40mail.gmail.com
The topic of turning EXPLAIN's BUFFERS option on with the ANALYZE option
has come up a few times over the past few years. In many ways, doing this
seems like a good idea as it may be more obvious to users why a given
query is running more slowly than they might expect. Also, from my own
(David's) personal experience, I've seen users posting to the mailing
lists with two identical plans, one slow and one fast asking why their
query is sometimes slow. In many cases, this is due to additional reads.
Having BUFFERS on by default may help reduce some of these questions, and
if not, make it more obvious to the user before they post, or save a
round-trip to the mailing list when additional I/O effort is the cause of
the slowness.
The general consensus is that we want BUFFERS on by default with
ANALYZE. However, there were more than zero concerns raised with doing
so. The primary reason against is the additional verbosity, making it
harder to read large plans. Another concern was that buffer information
isn't always useful so may not make sense to have it on by default.
It's currently December, so let's commit this to see if anyone comes
forward with a strong objection against making this change. We have over
half a year remaining in the v18 cycle where we could still easily consider
reverting this if someone were to come forward with a convincing enough
reason as to why doing this is a bad idea.
There were two patches independently submitted to achieve this goal, one
by me and the other by Guillaume. This commit is a mix of both of these
patches with some additional work done by me to adjust various
additional places in the documentation which include EXPLAIN ANALYZE
output.
Author: Guillaume Lelarge, David Rowley
Reviewed-by: Robert Haas, Greg Sabino Mullane, Michael Christofides
Discussion: https://postgr.es/m/CANNMO++W7MM8T0KyXN3ZheXXt-uLVM3aEtZd+WNfZ=obxffUiA@mail.gmail.com
It looks like the example case was once modified to increase the number
of rows but the EXPLAIN ANALYZE output wasn't updated to reflect that.
Also adjust the text which discusses the index sizes. With the example
table size, the bloom index isn't quite 8 times more space efficient
than the btree indexes.
Discussion: https://postgr.es/m/CAApHDvovx8kQ0=HTt85gFDAwmTJHpCgiSvRmQZ_6u_g-vQYM_w@mail.gmail.com
Backpatch-through: 13, all supported versions
Ensure stored generated columns that are part of REPLICA IDENTITY must be
published explicitly for UPDATE and DELETE operations to be published. We
can publish generated columns by listing them in the column list or by
enabling the publish_generated_columns option.
This commit changes the behavior of the test added in commit adedf54e65 by
giving an ERROR for the UPDATE operation in such cases. There is no way to
trigger the bug reported in commit adedf54e65 but we didn't remove the
corresponding code change because it is still relevant when replicating
changes from a publisher with version less than 18.
We decided not to backpatch this behavior change to avoid the risk of
breaking existing output plugins that may be sending generated columns by
default although we are not aware of any such plugin. Also, we didn't see
any reports related to this on STABLE branches which is another reason not
to backpatch this change.
Author: Shlok Kyal, Hou Zhijie
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CANhcyEVw4V2Awe2AB6i0E5AJLNdASShGfdBLbUd1XtWDboymCA@mail.gmail.com
The last section of pg_createsubscriber used the terms
"publication-name", "replication-slot-name", and "subscription-name".
These terms are not defined on the page, which was confusing, and the
intention is clearly to refer to the values one would give to the
options --publication, --subscription and --replication-slot. Let's
simplify the documentation by mentioning the option switches, instead of
these terms.
Reported-by: Christophe Courtois
Author: Shubham Khanna
Reviewed-by: Vignesh C, Peter Smith
Discussion: https://postgr.es/m/173288198026.714.15127074046508836738@wrigleys.postgresql.org
Backpatch-through: 17
Peter Eisentraut