Now that the documentation sources are in XML rather than SGML, some of
the documentation about the editor, or more specifically Emacs, setup
needs updating. The updated instructions recommend using nxml-mode,
which works mostly out of the box, with some small tweaks in
emacs.samples and .dir-locals.el.
Also remove some obsolete stuff in .dir-locals.el. I did, however,
leave the sgml-mode settings in there so that someone using Emacs
without emacs.samples gets those settings when editing a *.sgml file.
As of commit 37a795a60, populate_recordset_worker() tried to pass back
(as rsi.setDesc) a tupdesc that it also had cached in its fn_extra.
But the core executor would free the passed-back tupdesc, risking a
crash if the function were called again in the same query. The safest
and least invasive way to fix that is to make an extra tupdesc copy
to pass back.
While at it, I failed to resist the temptation to get rid of unnecessary
get_fn_expr_argtype() calls here and in populate_record_worker().
Per report from Dmitry Dolgov; thanks to Michael Paquier and
Andrew Gierth for investigation and discussion.
Discussion: https://postgr.es/m/CA+q6zcWzN9ztCfR47ZwgTr1KLnuO6BAY6FurxXhovP4hxr+yOQ@mail.gmail.com
The patch that ended up as commit 3de241dba8 ("Foreign keys on
partitioned tables") lacked pg_dump tests, so the pg_dump code that was
there to support it inadvertently stopped working when in later
development I modified the backend code not to emit pg_trigger rows for
the partitioned table itself.
Bug analysis and code fix is by Michaël. I (Álvaro) added the test.
Reported-by: amul sul <sulamul@gmail.com>
Co-authored-by: Michaël Paquier <michael@paquier.xyz>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAAJ_b94n=UsNVhgs97vCaWEZAMe-tGDRVuZ73oePQH=eaJKGSA@mail.gmail.com
When reading an existing FSM or VM page that was found to be corrupt by the
buffer manager, the code applied PageInit() to reinitialize the page, but
did so without any locking. There is thus a hazard that two backends might
concurrently do PageInit, which in itself would still be OK, but the slower
one might then zero over subsequent data changes applied by the faster one.
Even that is unlikely to be fatal; but it's not desirable, so add locking
to prevent it.
This does not add any locking overhead in the normal code path where the
page is OK. It's not immediately obvious that that's safe, but I believe
it is, for reasons explained in the added comments.
Problem noted by R P Asim. It's been like this for a long time, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/CANXE4Te4G0TGq6cr0-TvwP0H4BNiK_-hB5gHe8mF+nz0mcYfMQ@mail.gmail.com
Starting and aborting transactions in security definer procedures
doesn't work. StartTransaction() insists that the security context
stack is empty, so this would currently cause a crash, and
AbortTransaction() resets it. This could be made to work by
reorganizing the code, but right now we just prohibit it.
Reported-by: amul sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b96Gupt_LFL7uNyy3c50-wbhA68NUjiK5%3DrF6_w%3Dpq_T%3DQ%40mail.gmail.com
In ad9a274778, shmem_exit_inprogress was
introduced. But we need to reset it after shmem_exit(), because unlike
the similar proc_exit(), shmem_exit() can also be called for cleanup
when the process will not exit.
Reported-by: Andrew Gierth <andrew@tao11.riddles.org.uk>
Explain that you can use any integer expression for the "count" in
pl/pgsql's versions of FETCH/MOVE, unlike the SQL versions which only
allow a constant.
Remove the duplicate version of this para under MOVE. I don't see
a good reason to maintain two identical paras when we just said that
MOVE works exactly like FETCH.
Per Pavel Stehule, though I didn't use his text.
Discussion: https://postgr.es/m/CAFj8pRAcvSXcNdUGx43bOK1e3NNPbQny7neoTLN42af+8MYWEA@mail.gmail.com
When truncating a table that is referenced by foreign keys in
partitioned tables, the check to ensure the referencing table are also
truncated spuriously failed. This is because it was relying on
relhastriggers as a proxy for the table having FKs, and that's wrong for
partitioned tables. Fix it to consider such tables separately. There
may be a better way ... but this code is pretty inefficient already.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/20180711000624.zmeizicibxeehhsg@alvherre.pgsql
Commit ff4f88916 adjusted the code to enforce the SQL spec's requirement
that a window using GROUPS mode must have an ORDER BY clause. But I missed
that the documentation explicitly said you didn't have to have one.
Also minor wordsmithing in the window-function section of select.sgml.
Per Masahiko Sawada, though I didn't use his patch.
An update that causes the tuple to be moved to a different partition was
missing out on re-constructing the to-be-updated tuple, based on the latest
tuple in the update chain. Instead, it's simply deleting the latest tuple
and inserting a new tuple in the new partition based on the old tuple.
Commit 2f17844104 didn't consider this case, so some of the updates were
getting lost.
In passing, change the argument order for output parameter in ExecDelete
and add some commentary about it.
Reported-by: Pavan Deolasee
Author: Amit Khandekar, with minor changes by me
Reviewed-by: Dilip Kumar, Amit Kapila and Alvaro Herrera
Backpatch-through: 11
Discussion: https://postgr.es/m/CAJ3gD9fRbEzDqdeDq1jxqZUb47kJn+tQ7=Bcgjc8quqKsDViKQ@mail.gmail.com
WAL senders sending logically-decoded data fail to properly report in
"streaming" state when starting up, hence as long as one extra record is
not replayed, such WAL senders would remain in a "catchup" state, which
is inconsistent with the physical cousin.
This can be easily reproduced by for example using pg_recvlogical and
restarting the upstream server. The TAP tests have been slightly
modified to detect the failure and strengthened so as future tests also
make sure that a node is in streaming state when waiting for its
catchup.
Backpatch down to 9.4 where this code has been introduced.
Reported-by: Sawada Masahiko
Author: Simon Riggs, Sawada Masahiko
Reviewed-by: Petr Jelinek, Michael Paquier, Vaishnavi Prabakaran
Discussion: https://postgr.es/m/CAD21AoB2ZbCCqOx=bgKMcLrAvs1V0ZMqzs7wBTuDySezTGtMZA@mail.gmail.com
We should only run apply_pathtarget_labeling_to_tlist if CP_LABEL_TLIST
was specified, because only in that case has use_physical_tlist checked
that the labeling will succeed; otherwise we may get an "ORDER/GROUP BY
expression not found in targetlist" error. (This subsumes the previous
test about gating_clauses, because we reset "flags" to zero earlier
if there are gating clauses to apply.)
The only known case in which a failure can occur is with a ProjectSet
path directly atop a table scan path, although it seems likely that there
are other cases or will be such in future. This means that the failure
is currently only visible in the v10 branch: 9.6 didn't have ProjectSet,
while in v11 and HEAD, apply_scanjoin_target_to_paths for some weird
reason is using create_projection_path not apply_projection_to_path,
masking the problem because there's a ProjectionPath in between.
Nonetheless this code is clearly wrong on its own terms, so back-patch
to 9.6 where this logic was introduced.
Per report from Regina Obe.
Discussion: https://postgr.es/m/001501d40f88$75186950$5f493bf0$@pcorp.us
nodeWindowAgg.c failed to cope with the possibility that no ordering
columns are defined in the window frame for GROUPS mode or RANGE OFFSET
mode, leading to assertion failures or odd errors, as reported by Masahiko
Sawada and Lukas Eder. In RANGE OFFSET mode, an ordering column is really
required, so add an Assert about that. In GROUPS mode, the code would
work, except that the node initialization code wasn't in sync with the
execution code about when to set up tuplestore read pointers and spare
slots. Fix the latter for consistency's sake (even though I think the
changes described below make the out-of-sync cases unreachable for now).
Per SQL spec, a single ordering column is required for RANGE OFFSET mode,
and at least one ordering column is required for GROUPS mode. The parser
enforced the former but not the latter; add a check for that.
We were able to reach the no-ordering-column cases even with fully spec
compliant queries, though, because the planner would drop partitioning
and ordering columns from the generated plan if they were redundant with
earlier columns according to the redundant-pathkey logic, for instance
"PARTITION BY x ORDER BY y" in the presence of a "WHERE x=y" qual.
While in principle that's an optimization that could save some pointless
comparisons at runtime, it seems unlikely to be meaningful in the real
world. I think this behavior was not so much an intentional optimization
as a side-effect of an ancient decision to construct the plan node's
ordering-column info by reverse-engineering the PathKeys of the input
path. If we give up redundant-column removal then it takes very little
code to generate the plan node info directly from the WindowClause,
ensuring that we have the expected number of ordering columns in all
cases. (If anyone does complain about this, the planner could perhaps
be taught to remove redundant columns only when it's safe to do so,
ie *not* in RANGE OFFSET mode. But I doubt anyone ever will.)
With these changes, the WindowAggPath.winpathkeys field is not used for
anything anymore, so remove it.
The test cases added here are not actually very interesting given the
removal of the redundant-column-removal logic, but they would represent
important corner cases if anyone ever tries to put that back.
Tom Lane and Masahiko Sawada. Back-patch to v11 where RANGE OFFSET
and GROUPS modes were added.
Discussion: https://postgr.es/m/CAD21AoDrWqycq-w_+Bx1cjc+YUhZ11XTj9rfxNiNDojjBx8Fjw@mail.gmail.com
Discussion: https://postgr.es/m/153086788677.17476.8002640580496698831@wrigleys.postgresql.org
Such replication slots are physical slots freshly created without WAL
being reserved, which is the default behavior, which have not been used
yet as WAL consumption resources to retain WAL. This prevents advancing
a slot to a position older than any WAL available, which could falsify
calculations for WAL segment recycling.
This also cleans up a bit the code, as ReplicationSlotRelease() would be
called on ERROR, and improves error messages.
Reported-by: Kyotaro Horiguchi
Author: Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/20180626071305.GH31353@paquier.xyz
We fail to handle polymorphic types properly when they are used as
partition keys: we were unnecessarily adding a RelabelType node on top,
which confuses code examining the nodes. In particular, this makes
predtest.c-based partition pruning not to work, and ruleutils.c to emit
expressions that are uglier than needed. Fix it by not adding RelabelType
when not needed.
In master/11 the new pruning code is separate so it doesn't suffer from
this problem, since we already fixed it (in essentially the same way) in
e5dcbb88a1, which also added a few tests; back-patch those tests to
pg10 also. But since UPDATE/DELETE still uses predtest.c in pg11, this
change improves partitioning for those cases too. Add tests for this.
The ruleutils.c behavior change is relevant in pg11/master too.
Co-authored-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/54745d13-7ed4-54ac-97d8-ea1eec95ae25@lab.ntt.co.jp
Commit fafa374f2 caused _bt_getbuf() to possibly emit a WAL record for
a page that it was about to recycle. However, it failed to distinguish
all-zero pages from dead pages, which is important because only the
latter have valid btpo.xact values, or indeed any special space at all.
Recycling an all-zero page with XLogStandbyInfoActive() enabled therefore
led to an Assert failure, or to emission of a WAL record containing a
bogus cutoff XID, which might lead to unnecessary query cancellations
on hot standby servers.
Per reports from Antonin Houska and 自己. Amit Kapila was first to
propose this fix, and Robert Haas, myself, and Kyotaro Horiguchi
reviewed it at various times.
This is an old bug, so back-patch to all supported branches.
Discussion: https://postgr.es/m/2628.1474272158@localhost
Discussion: https://postgr.es/m/48875502.f4a0.1635f0c27b0.Coremail.zoulx1982@163.com
Commit 716ea626a attempted to fix the problem of building 1-D zero-size
arrays once and for all. But it turns out that contrib/intarray has some
code that doesn't use construct_array() but just builds arrays by hand,
so it didn't get the memo. This appears to affect all of subarray(),
intset_subtract(), inner_int_union(), inner_int_inter(), and
intarray_concat_arrays().
Back-patch into v11. In the past we've not back-patched this type of
change, but since v11 is still in beta it seems all right to include
this fix in it. Besides it's more consistent to make the fix in v11
where 716ea626a appeared.
Report and patch by Alexey Kryuchkov, some cosmetic adjustments by me
Report: https://postgr.es/m/153053285112.13258.434620894305716755@wrigleys.postgresql.org
Discussion: https://postgr.es/m/CAN85JcYphDLYt4CpMDLZjjNVqGDrFJ5eS3YF=wLAhFoDQuBsyg@mail.gmail.com
A critical failure in some of the end-of-recovery actions before the
end-of-recovery record is written can cause PostgreSQL to react
inconsistently with the rest of the cluster in the event of a crash
before the final record is written. Two such failures are for example
an error while processing a two-phase state files or when operating on
recovery.conf. With this commit, the failures are still considered
FATAL, but the write of the timeline history file is delayed as much as
possible so as the window between the moment the file is written and the
end-of-recovery record is generated gets minimized. This way, in the
event of a crash or a failure, the new timeline decided at promotion
will not seem taken by other nodes in the cluster. It is not really
possible to reduce to zero this window, hence one could still see
failures if a crash happens between the history file write and the
end-of-recovery record, so any future code should be careful when
adding new end-of-recovery actions. The original report from Magnus
Hagander mentioned a renamed recovery.conf as original end-of-recovery
failure which caused a timeline to be seen as taken but the subsequent
processing on the now-missing recovery.conf cause the startup process to
issue stop on FATAL, which at follow-up startup made the system
inconsistent because of on-disk changes which already happened.
Processing of two-phase state files still needs some work as corrupted
entries are simply ignored now. This is left as a future item and this
commit fixes the original complain.
Reported-by: Magnus Hagander
Author: Heikki Linnakangas
Reviewed-by: Alexander Korotkov, Michael Paquier, David Steele
Discussion: https://postgr.es/m/CABUevEz09XY2EevA2dLjPCY-C5UO4Hq=XxmXLmF6ipNFecbShQ@mail.gmail.com
While we probably don't want to split up all error messages into
function and procedure variants, this one is a very prominent one, so
it's helpful to be more specific here.
When performing pg_rewind, the presence of a read-only file which is not
accessible for writes will cause a failure while processing. This can
cause the control file of the target data folder to be truncated,
causing it to not be reusable with a successive run.
Also, when pg_rewind fails mid-flight, there is likely no way to be able
to recover the target data folder anyway, in which case a new base
backup is the best option. A note is added in the documentation as
well about.
Reported-by: Christian H.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20180104200633.17004.16377%40wrigleys.postgresql.org
When executing CALL in PL/pgSQL, we need to set a snapshot before
invoking the to-be-called procedure. Otherwise, the to-be-called
procedure might end up running without a snapshot. For LANGUAGE SQL
procedures, this would result in an assertion failure. (For most other
languages, this is usually not a problem, because those use SPI and SPI
sets snapshots in most cases.) Setting the snapshot restores the
behavior of how CALL worked when it was handled as a generic SQL
statement in PL/pgSQL (exec_stmt_execsql()).
This change revealed another problem: In SPI_commit(), we popped the
active snapshot before committing the transaction, to avoid "snapshot %p
still active" errors. However, there is no particular reason why only
at most one snapshot should be on the stack. So change this to pop all
active snapshots instead of only one.
Starting with commit 9915de6c1c, replication slot drop uses a
condition variable sleep to wait until the current user of the slot goes
away. This is more user friendly than the previous behavior of erroring
out if the slot is in use, but it fails with a not-for-user-consumption
error message in single-user mode; plus, if you're using single-user
mode because you don't want to start the server in the regular mode
(say, disk is full and WAL won't recycle because of the slot), it's
inconvenient.
Fix by skipping the cond variable sleep in single-user mode, since
there can't be anybody to wait for anyway.
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3b2f809f-326c-38dd-7a9e-897f957a4eb1@enterprisedb.com
Prefer to use phrases like "child" instead of "partition" when
describing the legacy inheritance-based partitioning. The word
"partition" now has a fixed meaning for the built-in partitioning, so
keeping it out of the documentation of the old method makes things
clearer.
Author: Justin Pryzby <pryzby@telsasoft.com>
Committer: Peter Eisentraut <peter_e@gmx.net>
Backpatch of: 0c06534bd6
Coverity complains that there is no protection in the code (at least in
non-assertion-enabled builds) against speculative insertion failing to
follow the expected protocol. Add an elog(ERROR) for the case.
Change a whole-database VACUUM into doing just pg_attribute, which is
the portion that verifies what we want it to do. The original
formulation wastes a lot of CPU time, which leads the test to fail when
runtime exceeds isolationtester timeout when it's super-slow, such as
under CLOBBER_CACHE_ALWAYS. Per buildfarm member friarbird.
It turns out that the previous shape of the test doesn't always detect
the condition it is supposed to detect (on unpatched reorderbuffer
code): the reason is that there is a good chance of encountering a
xl_running_xacts record (logged every 15 seconds) before the checkpoint
-- and because we advance the xmin when we receive that WAL record, and
we *don't* advance the xmin twice consecutively without receiving a
client message in between, that means the xmin is not advanced enough
for the tuple to be pruned from pg_attribute by VACUUM. So the test
would spuriously pass.
The reason this test deficiency wasn't detected earlier is that HOT
pruning removes the tuple anyway, even if vacuum leaves it in place, so
the test correctly fails (detecting the coding mistake), but for the
wrong reason.
To fix this mess, run the s0_get_changes step twice before vacuum
instead of once: this seems to cause the xmin to be advanced reliably,
wreaking havoc with more certainty.
Author: Arseny Sher
Discussion: https://postgr.es/m/87h8lkuxoa.fsf@ars-thinkpad
If a standby crashes after promotion before having completed its first
post-recovery checkpoint, then the minimal recovery point which marks
the LSN position where the cluster is able to reach consistency may be
set to a position older than the first end-of-recovery checkpoint while
all the WAL available should be replayed. This leads to the instance
thinking that it contains inconsistent pages, causing a PANIC and a hard
instance crash even if all the WAL available has not been replayed for
certain sets of records replayed. When in crash recovery,
minRecoveryPoint is expected to always be set to InvalidXLogRecPtr,
which forces the recovery to replay all the WAL available, so this
commit makes sure that the local copy of minRecoveryPoint from the
control file is initialized properly and stays as it is while crash
recovery is performed. Once switching to archive recovery or if crash
recovery finishes, then the local copy minRecoveryPoint can be safely
updated.
Pavan Deolasee has reported and diagnosed the failure in the first
place, and the base fix idea to rely on the local copy of
minRecoveryPoint comes from Kyotaro Horiguchi, which has been expanded
into a full-fledged patch by me. The test included in this commit has
been written by Álvaro Herrera and Pavan Deolasee, which I have modified
to make it faster and more reliable with sleep phases.
Backpatch down to all supported versions where the bug appears, aka 9.3
which is where the end-of-recovery checkpoint is not run by the startup
process anymore. The test gets easily supported down to 10, still it
has been tested on all branches.
Reported-by: Pavan Deolasee
Diagnosed-by: Pavan Deolasee
Reviewed-by: Pavan Deolasee, Kyotaro Horiguchi
Author: Michael Paquier, Kyotaro Horiguchi, Pavan Deolasee, Álvaro
Herrera
Discussion: https://postgr.es/m/CABOikdPOewjNL=05K5CbNMxnNtXnQjhTx2F--4p4ruorCjukbA@mail.gmail.com
When deleting pages the nbtree code has to walk through siblings of a
tree node. When those sibling links are corrupted that can lead to
endless loops - which are currently not interruptible. This is
especially problematic if autovacuum is repeatedly blocked on such
indexes, as it can be hard to get out of that situation without
resorting to single user mode.
Thus add interrupt checks to appropriate places in such
loops. Unfortunately in one of the cases it's it's not easy to do so.
Between 9.3 and 9.4 the page deletion (and page split) code changed
significantly. Before it was significantly less robust against
interruptions. Therefore don't backpatch to 9.3.
Author: Andres Freund
Discussion: https://postgr.es/m/20180627191629.wkunw2qbibnvlz53@alap3.anarazel.de
Backpatch: 9.4-
When multiple relations are deleted at the same transaction,
the files of those relations are deleted by one call to smgrdounlinkall(),
which leads to scan whole shared_buffers only one time. OTOH,
previously, during recovery, smgrdounlink() (not smgrdounlinkall()) was
called for each file to delete, which led to scan shared_buffers
multiple times. Obviously this could cause to increase the WAL replay
time very much especially when shared_buffers was huge.
To alleviate this situation, this commit changes the recovery so that
it also calls smgrdounlinkall() only one time to delete multiple
relation files.
This is just fix for oversight of commit 279628a0a7, not new feature.
So, per discussion on pgsql-hackers, we concluded to backpatch this
to all supported versions.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Andres Freund, Thomas Munro, Kyotaro Horiguchi, Takayuki Tsunakawa
Discussion: https://postgr.es/m/CAHGQGwHVQkdfDqtvGVkty+19cQakAydXn1etGND3X0PHbZ3+6w@mail.gmail.com
Since recent commit 1c7c317c, temporary relations cannot be mixed with
permanent relations within the same partition tree, and the same counts
for temporary relations created by other sessions, which the planner
simply discarded. Instead be paranoid and issue an error, as those
should be blocked at definition time, at least for now.
At the same time, a test case is added to stress what has been moved
when expand_partitioned_rtentry gets called recursively but bumps on a
partitioned relation with no partitions which should be handled the same
way as the non-inheritance case. This code may be reworked in a close
future, and covering this code path will limit surprises.
Reported-by: David Rowley
Author: David Rowley
Reviewed-by: Amit Langote, Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/CAKJS1f_HyV1txn_4XSdH5EOhBMYaCwsXyAj6bHXk9gOu4JKsbw@mail.gmail.com
When these programs call pg_catalog.set_config, they need to check for
PGRES_TUPLES_OK instead of PGRES_COMMAND_OK. Fix for
5770172cb0.
Reported-by: Ideriha, Takeshi <ideriha.takeshi@jp.fujitsu.com>
In a partition, row triggers that had been cloned from their parent
partitioned table would not be listed at all in psql's \d, which could
surprise users, per insistent complaint from Ashutosh Bapat (though his
aim was elsewhere). The simplest possible fix, suggested by Peter
Eisentraut, seems to be to list triggers marked as internal if they have
a row in pg_depend that points to some other trigger.
Author: Álvaro Herrera
Discussion: https://postgr.es/m/20180618165910.p26vhk7dpq65ix54@alvherre.pgsql
search.cpan.org has been EOL'd, with metacpan.org being the official
replacement to which URLs now redirect. Update links to match the new
URL. Also update links to CPAN to use https as it will redirect from
http.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/B74C0219-6BA9-46E1-A524-5B9E8CD3BDB3@yesql.se
Peter Eisentraut