It was walking into the ColumnDef->compression field, which is not a
node but a string. This code is currently not reachable (because the
compression field is only set in situations that don't go through
raw_expression_tree_walker()), but if it had been, this could have
behaved erratically.
Not including the timeline IDs to the file names generated by pg_waldump
for the individual blocks saved could cause some of these files to be
overwritten when scanning segments across multiple timelines. Having
this information is also as much useful as the LSNs, to be able to know
from exactly which WAL segment a block is comes from.
While on it, this fixes a few comments in the tests, where the format of
the file was not described as matching with the reality.
Reported-by: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, David Christensen
Discussion: https://postgr.es/m/ZJp921+nITFnvBVS@paquier.xyz
A portion of ALTER TABLE .. ATTACH PARTITION is to ensure that the
partition being attached to the partitioned table has a correct set of
indexes, so as there is a consistent index mapping between the
partitioned table and its new-to-be partition. However, as introduced
in 8b08f7d, the current logic could choose an invalid index as a match,
which is something that can exist when dealing with more than two levels
of partitioning, like attaching a partitioned table (that has
partitions, with an index created by CREATE INDEX ON ONLY) to another
partitioned table.
A partitioned index with indisvalid set to false is equivalent to an
incomplete partition tree, meaning that an invalid partitioned index
does not have indexes defined in all its partitions. Hence, choosing an
invalid partitioned index can create inconsistent partition index trees,
where the parent attaching to is valid, but its partition may be
invalid.
In the report from Alexander Lakhin, this showed up as an assertion
failure when validating an index. Without assertions enabled, the
partition index tree would be actually broken, as indisvalid should
be switched to true for a partitioned index once all its partitions are
themselves valid. With two levels of partitioning, the top partitioned
table used a valid index and was able to link to an invalid index stored
on its partition, itself a partitioned table.
I have studied a few options here (like the possibility to switch
indisvalid to false for the parent), but came down to the conclusion
that we'd better rely on a simple rule: invalid indexes had better never
be chosen, so as the partition attached uses and creates indexes that
the parent expects. Some regression tests are added to provide some
coverage. Note that the existing coverage is not impacted.
This is a problem since partitioned indexes exist, so backpatch all the
way down to v11.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/14987634-43c0-0cb3-e075-94d423607e08@gmail.com
Backpatch-through: 11
Since 3db72eb, the query ID of utilities is generated using the Query
structure, making the use of the query string in JumbleQuery()
unnecessary. This commit removes the argument "querytext" from
JumbleQuery().
Reported-by: Joe Conway
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/ZJlQAWE4COFqHuAV@paquier.xyz
TParserGet() recurses for some token types, meaning it's possible
to drive it to stack overflow. Since this is a minority behavior,
I chose to add the check_stack_depth() call to the two places that
recurse rather than doing it during every single call.
While at it, add CHECK_FOR_INTERRUPTS(), because this can run
unpleasantly long for long inputs.
Per bug #17995 from Zuming Jiang. This is old, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/17995-9f20ff3e6389db4c@postgresql.org
One of the tests for the pipeline mode with portal description expects a
non-NULL PQgetResult, but used an incorrect error message on failure,
telling that PQgetResult being NULL was the expected result.
Author: Jelte Fennema
Discussion: https://postgr.es/m/CAGECzQTkShHecFF+EZrm94Lbsu2ej569T=bz+PjMbw9Aiioxuw@mail.gmail.com
Backpatch-through: 14
The documentation of the required privileges for maintenance
commands (i.e., VACUUM, ANALYZE, CLUSTER, LOCK TABLE, REFRESH
MATERIALIZED VIEW, and REINDEX) is redundant, inaccurate, and
difficult to read. This commit fixes and simplifies this
documentation by removing references to ownership, superuser, and
the pg_maintain role. In addition, this removes notes about
database-wide VACUUM and ANALYZE, clarifies matters for REINDEX on
partitioned indexes and tables, and strengthens the description of
the pg_maintain role.
Reviewed-by: Michael Paquier, Jeff Davis
Discussion: https://postgr.es/m/20230615041044.GA736001%40nathanxps13
ff9618e82a introduced has_partition_ancestor_privs(), which is used
to check whether a user has MAINTAIN on any partition ancestors.
This involves syscache lookups, and presently this function does
not take any relation locks, so it is likely subject to the same
kind of cache lookup failures that were fixed by 19de0ab23c.
To fix this problem, this commit partially reverts ff9618e82a.
Specifically, it removes the partition-related changes, including
the has_partition_ancestor_privs() function mentioned above. This
means that MAINTAIN on a partitioned table is no longer sufficient
to perform maintenance commands on its partitions. This is more
like how privileges for maintenance commands work on supported
versions. Privileges are checked for each partition, so a command
that flows down to all partitions might refuse to process them
(e.g., if the current user doesn't have MAINTAIN on the partition).
In passing, adjust a few related comments and error messages, and
add a test for the privilege checks for CLUSTER on a partitioned
table.
Reviewed-by: Michael Paquier, Jeff Davis
Discussion: https://postgr.es/m/20230613211246.GA219055%40nathanxps13
By default, triggers and rules do not fire on a logical replication
subscriber based on the "session_replication_role" GUC being set to
"replica". However, the docs in the logical replication section assumed
that the reader understood how this GUC worked. This modifies the docs to
be more explicit and links back to the GUC itself.
Author: Jonathan Katz, Peter Smith
Reviewed-by: Vignesh C, Euler Taveira
Backpatch-through: 11
Discussion: https://postgr.es/m/5bb2c9a2-499f-e1a2-6e33-5ce96b35cc4a@postgresql.org
Statistics defined by the CREATE STATISTICS command are only used to
assist with the selectivity estimations of base relations, never for
joins. Here we mention this fact in the notes section of the CREATE
STATISTICS command.
Discussion: https://postgr.es/m/CAApHDvrMuVgDOrmg_EtFDZ=AOovq6EsJNnHH1ddyZ8EqL4yzMw@mail.gmail.com
Backpatch-through: 11
Avoid "right sibling %u of block %u is not next child" errors when
vacuuming a corrupt nbtree index. Just LOG the issue and press on.
That way VACUUM will have a decent chance of finishing off all required
processing for the index (and for the table as a whole).
This is similar to recent work from commit 5abff197, as well as work
from commit 5b861baa (later backpatched as commit 43e409ce), which
taught nbtree VACUUM to keep going when its "re-find" check fails. The
hardening added by this commit takes place directly after the "re-find"
check, right before the critical section for the first stage of page
deletion.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=dayg0vjs4+er84TS9ami=csdzjpuiCGbEw=idhwqhzQ@mail.gmail.com
Backpatch: 11- (all supported versions).
exec_parse_message() wants to create a cached plan in all cases,
including for empty input. The empty-input path does not have
a test for being in an aborted transaction, making it possible
that plancache.c will fail due to trying to do database lookups
even though there's no real work to do.
One solution would be to throw an aborted-transaction error in
this path too, but it's not entirely clear whether the lack of
such an error was intentional or whether some clients might be
relying on non-error behavior. Instead, let's hack plancache.c
so that it treats empty statements with the same logic it
already had for transaction control commands, ensuring that it
can soldier through even in an already-aborted transaction.
Per bug #17983 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/17983-da4569fcb878672e@postgresql.org
pgperltidy as well as pgperlcritic and pgperlsyncheck now allow
passing files and directories on the command line, like pgindent does.
(Previously, they would always operate on the whole tree.)
Also, for consistency with pgindent's new behavior (as of b16259b3c1),
passing an argument is now required. To get the previous default
behavior, use "pgperltidy ." for example.
Discussion: https://www.postgresql.org/message-id/flat/45aacd8a-5265-d9da-8df2-b8e2c0cf6a07%40eisentraut.org
This partially reverts 68cb5af, as using archiving to enforce the
rename of the last partial segment of the old timeline at promotion to
use .partial as suffix is impacting the tests when it does switchovers.
As showed by the logs gathered by the CI in the tests that failed, a new
standby may fail to find the WAL segment it needs to follow a promoted
instance with its timeline jump, as it got renamed to .partial.
This problem would manifest as a run timeout with 009_twophase.pl, as
the new standby repeatedly requests a segment from the promoted primary
that it would not find.
Reported-by: Nathan Bossart
Discussion: https://postgr.es/m/20230621043345.GA787473@nathanxps13
Backpatch-through: 13
The existing errhint message and docs were missing the fact that we can't
disassociate from the slot unless the subscription is disabled.
Author: Robert Sjöblom, Peter Smith
Reviewed-by: Peter Eisentraut, Amit Kapila
Backpatch-through: 11
Discussion: https://postgr.es/m/807bdf85-61ea-88e2-5712-6d9fcd4eabff@fortnox.se
ff9618e82a introduced the skip_privs parameter, which is used to
skip privilege checks when recursing to a relation's TOAST table.
This parameter should have been added as a flag bit in
VacuumParams->options instead.
Suggested-by: Michael Paquier
Reviewed-by: Michael Paquier, Jeff Davis
Discussion: https://postgr.es/m/ZIj4v1CwqlDVJZfB%40paquier.xyz
If the inner-side expressions contain PARAM_EXEC Params, we must
re-hash whenever the values of those Params change. The executor
mechanism for that exists already, but we failed to invoke it because
finalize_plan() neglected to search the Hash.hashkeys field for
Params. This allowed a previous scan's hash table to be re-used
when it should not be, leading to rows missing from the join's output.
(I believe incorrectly-included join rows are impossible however,
since checking the real hashclauses would reject false matches.)
This bug is very ancient, dating probably to d24d75ff1 of 7.4.
Sadly, this simple fix depends on the plan representational changes
made by 2abd7ae9b, so it will only work back to v12. I thought
about trying to make some kind of hack for v11, but I'm leery
of putting code significantly different from what is used in the
newer branches into a nearly-EOL branch. Seeing that the bug
escaped detection for a full twenty years, problematic cases
must be rare; so I don't feel too awful about leaving v11 as-is.
Per bug #17985 from Zuming Jiang. Back-patch to v12.
Discussion: https://postgr.es/m/17985-748b66607acd432e@postgresql.org
I removed the delay_upper_joins mechanism in commit b448f1c8d,
reasoning that it was only needed when we have a single-table
(SELECT ... WHERE) as the immediate RHS child of a left join,
and we could get rid of that by hoisting the WHERE condition into
the parent join's quals. However that new code missed a case:
we could have "foo LEFT JOIN ((SELECT ... WHERE) LEFT JOIN bar)",
and if the two left joins can be commuted then we now have the
problematic query shape. We can fix this too easily enough,
by allowing the syntactically-lower left join to pass through
its parent qual location pointer recursively. That lets
prepjointree.c discard the SELECT by temporarily hoisting the
WHERE condition into the ancestor join's qual.
Per bug #17978 from Zuming Jiang.
Discussion: https://postgr.es/m/17978-12f3d93a55297266@postgresql.org
This avoids an assertion failure when outer joins are rearranged
per identity 3. Listing only the baserels from a PlaceHolderVar's
ph_lateral set should be enough to ensure that the required values
are available when we need to compute the PHV --- it's what we
did before inventing nullingrel sets, after all. It's a bit
unsatisfying; but with beta2 hard upon us, there's not time to
look for an aesthetically cleaner fix.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/CAMbWs48Jcw-NvnxT23WiHP324wG44DvzcH1j4hc0Zn+3sR9cfg@mail.gmail.com
It turns out that the fixes we applied in commits bfd332b3f
and 63e4f13d2 were not nearly enough to solve the problem.
We'd focused narrowly on subquery RTEs with lateral references,
but lateral references can occur in several other RTE kinds
such as function RTEs. Putting the same hack into half a dozen
code paths seems quite unattractive. Hence, revert the code changes
(but not the test cases) from those commits and instead solve it
centrally in identify_current_nestloop_params(), as Richard proposed
originally. This is a bit annoying because it could mask erroneous
nullingrels in nestloop params that are generated from non-LATERAL
parameterized paths; but on balance I don't see a better way.
Maybe at some future time we'll be motivated to find a more rigorous
approach to nestloop params, but that's not happening for beta2.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/CAMbWs48Jcw-NvnxT23WiHP324wG44DvzcH1j4hc0Zn+3sR9cfg@mail.gmail.com
Run pgindent and pgperltidy. It seems we're still some ways
away from all committers doing this automatically. Now that
we have a buildfarm animal that will whine about poorly-indented
code, we'll try to keep the tree more tidy.
Discussion: https://postgr.es/m/3156045.1687208823@sss.pgh.pa.us
Specify --no-locale and --encoding=UTF8 to be consistent with the
Makefile, which specifies NO_LOCALE=1. Fixes test for some locales
when meson is used and ICU is disabled. May have been an oversight in
e6927270cd.
Also switch argument order in unaccent/meson.build to make it
consistent in style.
Discussion: https://postgr.es/m/CABwTF4Wz41pNMJ9q3tpH=6mnvg6aopDU5Lzvers5=6=WJVekww@mail.gmail.com
Author: Gurjeet Singh
Author: Jeff Davis
This is a follow-up of f663b00, that has been committed to v13 and v14,
tweaking the TAP test for two-phase transactions so as it provides
coverage for the bug that has been fixed. This change is done in its
own commit for clarity, as v15 and HEAD did not show the problematic
behavior, still missed coverage for it.
While on it, this adds a comment about the dependency of the last
partial segment rename and RecoverPreparedTransactions() at the end of
recovery, as that can be easy to miss.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/743b9b45a2d4013bd90b6a5cba8d6faeb717ee34.camel@cybertec.at
Backpatch-through: 13
Starting with 4d330a61bb we can use posix_fallocate() to extend
files. Unfortunately in some situation, e.g. on tmpfs filesystems, EINTR may
be returned. See also 4518c798b2.
To fix, add a retry path to FileFallocate(). In contrast to 4518c798b2 the
amount we extend by is limited and the extending may happen at a high
frequency, so disabling signals does not appear to be the correct path here.
Also add retry paths to other file operations currently lacking them (around
fdatasync(), fsync(), ftruncate(), posix_fadvise(), sync_file_range(),
truncate()) - they are all documented or have been observed to return EINTR.
Even though most of these functions used in the back branches, it does not
seem worth the risk to backpatch - outside of the new-to-16 case of
posix_fallocate() I am not aware of problem reports due to the lack of
retries.
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/ZEZDj1H61ryrmY9o@msg.df7cb.de
Backpatch: -
Instead of specifying LC_COLLATE='C' and LC_CTYPE='C', specify
LOCALE='C' which will also affect ICU. This makes pg_regress
consistent with recent changes to initdb in commit a14e75eb0b.
Fixes buildfarm failure.
Discussion: https://postgr.es/m/2458565.1686953169@sss.pgh.pa.us
Here we adjust relation_has_unique_index_for() so that it no longer makes
use of partial unique indexes as uniqueness proofs. It is incorrect to
use these as the predicates used by check_index_predicates() to set
predOK makes use of not only baserestrictinfo quals as proofs, but also
qual from join conditions. For relation_has_unique_index_for()'s case, we
need to know the relation is unique for a given set of columns before any
joins are evaluated, so if predOK was only set to true due to some join
qual, then it's unsafe to use such indexes in
relation_has_unique_index_for(). The final plan may not even make use
of that index, which could result in reading tuples that are not as
unique as the planner previously expected them to be.
Bug: #17975
Reported-by: Tor Erik Linnerud
Backpatch-through: 11, all supported versions
Discussion: https://postgr.es/m/17975-98a90c156f25c952%40postgresql.org
Peter Eisentraut