This commit adds query ID reports for two code paths when processing
extended query protocol messages:
- When receiving a bind message, setting it to the first Query retrieved
from a cached cache.
- When receiving an execute message, setting it to the first PlannedStmt
stored in a portal.
An advantage of this method is that this is able to cover all the types
of portals handled in the extended query protocol, particularly these
two when the report done in ExecutorStart() is not enough (neither is an
addition in ExecutorRun(), actually, for the second point):
- Multiple execute messages, with multiple ExecutorRun().
- Portal with execute/fetch messages, like a query with a RETURNING
clause and a fetch size that stores the tuples in a first execute
message going though ExecutorStart() and ExecuteRun(), followed by one
or more execute messages doing only fetches from the tuplestore created
in the first message. This corresponds to the case where
execute_is_fetch is set, for example.
Note that the query ID reporting done in ExecutorStart() is still
necessary, as an EXECUTE requires it. Query ID reporting is optimistic
and more calls to pgstat_report_query_id() don't matter as the first
report takes priority except if the report is forced. The comment in
ExecutorStart() is adjusted to reflect better the reality with the
extended query protocol.
The test added in pg_stat_statements is a courtesy of Robert Haas. This
uses psql's \bind metacommand, hence this part is backpatched down to
v16.
Reported-by: Kaido Vaikla, Erik Wienhold
Author: Sami Imseih
Reviewed-by: Jian He, Andrei Lepikhov, Michael Paquier
Discussion: https://postgr.es/m/CA+427g8DiW3aZ6pOpVgkPbqK97ouBdf18VLiHFesea2jUk3XoQ@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoZxtnf_jZ=VqBSyaU8hfUkkwoJCJ6ufy4LGpXaunKrjrg@mail.gmail.com
Discussion: https://postgr.es/m/1391613709.939460.1684777418070@office.mailbox.org
Backpatch-through: 14
Since we introduced unlogged sequences in v15, identity sequences
have defaulted to having the same persistence as their owning table.
However, it is possible to change that with ALTER SEQUENCE, and
pg_dump tries to preserve the logged-ness of sequences when it doesn't
match (as indeed it wouldn't for an unlogged table from before v15).
The fly in the ointment is that ALTER SEQUENCE SET [UN]LOGGED fails
in binary-upgrade mode, because it needs to assign a new relfilenode
which we cannot permit in that mode. Thus, trying to pg_upgrade a
database containing a mismatching identity sequence failed.
To fix, add syntax to ADD/ALTER COLUMN GENERATED AS IDENTITY to allow
the sequence's persistence to be set correctly at creation, and use
that instead of ALTER SEQUENCE SET [UN]LOGGED in pg_dump. (I tried to
make SET [UN]LOGGED work without any pg_dump modifications, but that
seems too fragile to be a desirable answer. This way should be
markedly faster anyhow.)
In passing, document the previously-undocumented SEQUENCE NAME option
that pg_dump also relies on for identity sequences; I see no value
in trying to pretend it doesn't exist.
Per bug #18618 from Anthony Hsu.
Back-patch to v15 where we invented this stuff.
Discussion: https://postgr.es/m/18618-d4eb26d669ed110a@postgresql.org
In existing releases of libxml2, xmlXPathCompile can be driven
to stack overflow because it fails to protect itself against
too-deeply-nested input. While there is an upstream fix as of
yesterday, it will take years for that to propagate into all
shipping versions. In the meantime, we can protect our own
usages basically for free by calling xmlXPathCtxtCompile instead.
(The actual bug is that libxml2 keeps its nesting counter in the
xmlXPathContext, and its parsing code was willing to just skip
counting nesting levels if it didn't have a context. So if we supply
a context, all is well. It seems odd actually that it works at all
to not supply a context, because this means that XPath parsing does
not have access to XML namespace info. Apparently libxml2 never
checks namespaces until runtime? Anyway, this seems like good
future-proofing even if its only immediate effect is to dodge a bug.)
Sadly, this hack only offers protection with libxml2 2.9.11 and newer.
Before that there are multiple similar problems, so if you are
processing untrusted XML it behooves you to get a newer version.
But we have some pretty old libxml2 in the buildfarm, so it seems
impractical to add a regression test to verify this fix.
Per bug #18617 from Jingzhou Fu. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/18617-1cee4d2ed1f4e7ae@postgresql.org
Discussion: https://gitlab.gnome.org/GNOME/libxml2/-/issues/799
Historically we've used timezone "PST8PDT", but the recent release
2024b of tzdb changes the definition of that zone in a way that
breaks many test cases concerned with dates before 1970. Although
we've not yet adopted 2024b into our own tree, this is already
problematic for people using --with-system-tzdata if their platform
has already adopted 2024b. To work with both older and newer
versions of tzdb, switch to using "America/Los_Angeles", accepting
the ensuing changes in regression test results.
Back-patch to all supported branches.
Per report and patch from Wolfgang Walther.
Discussion: https://postgr.es/m/0a997455-5aba-4cf2-a354-d26d8bcbfae6@technowledgy.de
Latest versions of Strawberry Perl define USE_THREAD_SAFE_LOCALE, and we
therefore get a handshake error when building against such instances.
The solution is to perform a test to see if USE_THREAD_SAFE_LOCALE is
defined and only define NO_THREAD_SAFE_LOCALE if it isn't.
Backpatch the meson.build fix back to release 16 and apply the same
logic to Mkvcbuild.pm in releases 12 through 16.
Original report of the issue from Muralikrishna Bandaru.
When we are building a hash index that is large enough to need
pre-sorting (larger than either maintenance_work_mem or NBuffers),
the initial sorting phase is interruptible, but the insertion
phase wasn't. Add the missing CHECK_FOR_INTERRUPTS().
Per bug #18616 from Alexander Lakhin. Back-patch to all
supported branches.
Pavel Borisov
Discussion: https://postgr.es/m/18616-acbb9e5caf41e964@postgresql.org
I managed to break this test in two different ways in commit
05036a3155.
First, the output of the new call to tuple_data_split() on the test
sequence is dependent on endianness. This is fixed by setting a
special start value for the test sequence that produces the same
output regardless of the endianness of the machine.
Second, on versions older than v15, the new test case fails under
"force_parallel_mode = regress" with the following error:
ERROR: cannot access temporary tables during a parallel operation
This is because pageinspect's disk-accessing functions are
incorrectly marked PARALLEL SAFE on versions older than v15 (see
commit aeaaf520f4 for details). This one is fixed by changing the
test sequence to be permanent. The only reason it was previously
marked temporary was to avoid needing a DROP SEQUENCE command at
the end of the test. Unlike some other tests in this file, the use
of a permanent sequence here shouldn't result in any test
instability like what was fixed by commit e2933a6e11.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZuOKOut5hhDlf_bP%40nathan
Backpatch-through: 12
Commit 4b82664156 restricted a number of functions provided by
contrib modules to only relations that use the "heap" table access
method. Sequences always use this table access method, but they do
not advertise as such in the pg_class system catalog, so the
aforementioned commit also (presumably unintentionally) removed
support for sequences from some of these functions. This commit
reintroduces said support for sequences to these functions and adds
a couple of relevant tests.
Co-authored-by: Ayush Vatsa
Reviewed-by: Robert Haas, Michael Paquier, Matthias van de Meent
Discussion: https://postgr.es/m/CACX%2BKaP3i%2Bi9tdPLjF5JCHVv93xobEdcd_eB%2B638VDvZ3i%3DcQA%40mail.gmail.com
Backpatch-through: 12
check_agglevels_and_constraints() asserted that if we find an
aggregate function in an EXPR_KIND_FROM_SUBSELECT expression, the
expression must be in a LATERAL subquery. Alexander Lakhin found a
case where that's not so: because of the odd scoping rules for NEW/OLD
within a rule, a reference to NEW/OLD could cause an aggregate to be
considered top-level even though it's in an unmarked sub-select.
The error message that would be thrown seems sufficiently on-point,
so just remove the Assert. (Hence, this is not a bug for production
builds.)
This Assert was added by me in commit eaccfded9 (9.3 era). It looks
like I put it in to cross-check that the new logic for detecting
misplaced aggregates (using agglevelsup) caught the same cases that a
previous check on p_lateral_active did. So there might have been some
related misbehavior before eaccfded9 ... but that's very ancient
history by now, so I didn't dig any deeper.
Per bug #18608 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18608-48de0717508ee429@postgresql.org
As introduced by f9900df5f9, a REINDEX CONCURRENTLY job done for an
index with predicates or expressions would set PROC_IN_SAFE_IC in its
MyProc->statusFlags, causing it to be ignored by other concurrent
operations.
Such concurrent index rebuilds should never be ignored, as a predicate
or an expression could call a user-defined function that accesses a
different table than the table where the index is rebuilt.
A test that uses injection points is added, backpatched down to 17.
Michail has proposed a different test, but I have added something
simpler with more coverage.
Oversight in f9900df5f9.
Author: Michail Nikolaev
Discussion: https://postgr.es/m/CANtu0oj9A3kZVduFTG0vrmGnKB+DCHgEpzOp0qAyOgmks84j0w@mail.gmail.com
Backpatch-through: 14
Since commit 2549f0661, we reject an identifier immediately following
a numeric literal (without separating whitespace), because that risks
ambiguity with hex/octal/binary integers. However, that patch used
token patterns like "{integer}{ident_start}", which is problematic
because {ident_start} matches only a single byte. If the first
character after the integer is a multibyte character, this ends up
with flex reporting an error message that includes a partial multibyte
character. That can cause assorted bad-encoding problems downstream,
both in the report to the client and in the postmaster log file.
To fix, use {identifier} not {ident_start} in the "junk" token
patterns, so that they will match complete multibyte characters.
This seems generally better user experience quite aside from the
encoding problem: for "123abc" the error message will now say that
the error appeared at or near "123abc" instead of "123a".
While at it, add some commentary about why these patterns exist
and how they work.
Report and patch by Karina Litskevich; review by Pavel Borisov.
Back-patch to v15 where the problem came in.
Discussion: https://postgr.es/m/CACiT8iZ_diop=0zJ7zuY3BXegJpkKK1Av-PU7xh0EDYHsa5+=g@mail.gmail.com
The first test was sensitive to the insert LSN after setting up the
catalogs, which depended on environmental things like the locales on the
OS and usernames. Switch to a new WAL file before the first test, as a
simple way to put every computer into the same state.
Back-patch to all supported releases.
Reported-by: Anton Voloshin <a.voloshin@postgrespro.ru>
Reported-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/b26aeac2-cb6d-4633-a7ea-945baae83dcf%40postgrespro.ru
This change improves the description of the
restrict_nonsystem_relation_kind parameter in guc_table.c and the
documentation for better clarity.
Backpatch to 12, where this GUC parameter was introduced.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/6a96f1af-22b4-4a80-8161-1f26606b9ee2%40eisentraut.org
Backpatch-through: 12
This does not make sense. It would write the output of the USING
clause into the converted column, which would violate the generation
expression. This adds a check to error out if this is specified.
There was a test for this, but that test errored out for a different
reason, so it was not effective.
Reported-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Yugo NAGATA <nagata@sraoss.co.jp>
Discussion: https://www.postgresql.org/message-id/flat/c7083982-69f4-4b14-8315-f9ddb20b9834%40eisentraut.org
The descriptions for ProcArrayGroupUpdate and XactGroupUpdate claim
that these events mean we are waiting for the group leader "at end
of a parallel operation," but neither pertains to parallel
operations. This commit reverts these descriptions to their
wording before commit 3048898e73, i.e., "end of a parallel
operation" is changed to "transaction end."
Author: Sameer Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAGPeHmh6UMrKQHKCmX%2B5vV5TH9P%3DKw9en3k68qEem6J%3DyrZPUA%40mail.gmail.com
Backpatch-through: 13
When a partition is detached and immediately dropped, a prepared
statement could try to compute a new partition descriptor that includes
it. This leads to this kind of error:
ERROR: could not open relation with OID 457639
Avoid this by skipping the partition in expand_partitioned_rtentry if it
doesn't exist.
Noted by me while investigating bug #18559. Kuntal Gosh helped to
identify the exact failure.
Backpatch to 14, where DETACH CONCURRENTLY was introduced.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/202408122233.bo4adt3vh5bi@alvherre.pgsql
Add a comment explaining dropdb() can't rely on syscache. The issue with
flattened rows was fixed by commit 0f92b230f8, but better to have
a clear explanation why the systable scan is necessary. The other places
doing in-place updates on pg_database have the same comment.
Suggestion and patch by Yugo Nagata. Backpatch to 12, same as the fix.
Author: Yugo Nagata
Backpatch-through: 12
Discussion: https://postgr.es/m/CAJTYsWWNkCt+-UnMhg=BiCD3Mh8c2JdHLofPxsW3m2dkDFw8RA@mail.gmail.com
Commit 274bbced disabled session tickets for TLSv1.3 on top of the
already disabled TLSv1.2 session tickets, but accidentally caused
a regression where TLSv1.2 session tickets were incorrectly sent.
Fix by unconditionally disabling TLSv1.2 session tickets and only
disable TLSv1.3 tickets when the right version of OpenSSL is used.
Backpatch to all supported branches.
Reported-by: Cameron Vogt <cvogt@automaticcontrols.net>
Reported-by: Fire Emerald <fire.github@gmail.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/DM6PR16MB3145CF62857226F350C710D1AB852@DM6PR16MB3145.namprd16.prod.outlook.com
Backpatch-through: v12
Commit ca051d8b10 called newlocale(LC_COLLATE, ...) instead of
newlocale(LC_COLLATE_MASK, ...), in code reached only on FreeBSD. They
have the same value on that OS, explaining why it worked. Fix.
Back-patch to 14, where ca051d8b10 landed.
MacPorts version 2.9.3 started failing in our ci_macports_packages.sh
script, for reasons not fully determined, but plausibly linked to the
release of 2.10.1. 2.10.1 seems to work, so let's switch to it.
Back-patch to 15, where CI began.
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/81f104e8-f0a9-43c0-85bd-2bbbf590a5b8%40eisentraut.org
Commit c66a7d75e6 modified DROP DATABASE so that if interrupted, the
database is known to be in an invalid state and can only be dropped.
This is done by setting a flag using an in-place update, so that it's
not lost in case of rollback.
For databases with many ACLs, this may however fail like this:
ERROR: wrong tuple length
This happens because with many ACLs, the pg_database.datacl attribute
gets TOASTed. The dropdb() code reads the tuple from the syscache, which
means it's detoasted. But the in-place update expects the tuple length
to match the on-disk tuple.
Fixed by reading the tuple from the catalog directly, not from syscache.
Report and fix by Ayush Tiwari. Backpatch to 12. The DROP DATABASE fix
was backpatched to 11, but 11 is EOL at this point.
Reported-by: Ayush Tiwari
Author: Ayush Tiwari
Reviewed-by: Tomas Vondra
Backpatch-through: 12
Discussion: https://postgr.es/m/CAJTYsWWNkCt+-UnMhg=BiCD3Mh8c2JdHLofPxsW3m2dkDFw8RA@mail.gmail.com
If a partition undergoes DETACH CONCURRENTLY immediately followed by
DROP, this could cause a problem for a concurrent transaction
recomputing the partition descriptor when running a prepared statement,
because it tries to dereference a pointer to a tuple that's not found in
a catalog scan.
The existing retry logic added in commit dbca3469eb is sufficient to
cope with the overall problem, provided we don't try to dereference a
non-existant heap tuple.
Arguably, the code in RelationBuildPartitionDesc() has been wrong all
along, since no check was added in commit 898e5e3290 against receiving
a NULL tuple from the catalog scan; that bug has only become
user-visible with DETACH CONCURRENTLY which was added in branch 14.
Therefore, even though there's no known mechanism to cause a crash
because of this, backpatch the addition of such a check to all supported
branches. In branches prior to 14, this would cause the code to fail
with a "missing relpartbound for relation XYZ" error instead of
crashing; that's okay, because there are no reports of such behavior
anyway.
Author: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://postgr.es/m/18559-b48286d2eacd9a4e@postgresql.org
Coverity thinks dpns->plan could be null at these points. That
shouldn't really be possible, but it's easy enough to modify the
Asserts so they'd not core-dump if it were true.
These are new in b919a97a6. Back-patch to v13; the v12 version
of the patch didn't have these Asserts.
The code intends to allow GUCs to be set within parallel workers
via function SET clauses, but not otherwise. However, doing so fails
for "session_authorization" and "role", because the assign hooks for
those attempt to set the subsidiary "is_superuser" GUC, and that call
falls foul of the "not otherwise" prohibition. We can't switch to
using GUC_ACTION_SAVE for this, so instead add a new GUC variable
flag GUC_ALLOW_IN_PARALLEL to mark is_superuser as being safe to set
anyway. (This is okay because is_superuser has context PGC_INTERNAL
and thus only hard-wired calls can change it. We'd need more thought
before applying the flag to other GUCs; but maybe there are other
use-cases.) This isn't the prettiest fix perhaps, but other
alternatives we thought of would be much more invasive.
While here, correct a thinko in commit 059de3ca4: when rejecting
a GUC setting within a parallel worker, we should return 0 not -1
if the ereport doesn't longjmp. (This seems to have no consequences
right now because no caller cares, but it's inconsistent.) Improve
the comments to try to forestall future confusion of the same kind.
Despite the lack of field complaints, this seems worth back-patching.
Thanks to Nathan Bossart for the idea to invent a new flag,
and for review.
Discussion: https://postgr.es/m/2833457.1723229039@sss.pgh.pa.us
This section claims we use CRC-32 for WAL records and two-phase
state files, but we've actually used CRC-32C since v9.5 (commit
5028f22f6e). Fix that.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/ZrUFpLP-w2zTAHqq%40nathan
Backpatch-through: 12
To deparse a reference to a field of a RECORD-type output of a
subquery, EXPLAIN normally digs down into the subquery's plan to try
to discover exactly which anonymous RECORD type is meant. However,
this can fail if the subquery has been optimized out of the plan
altogether on the grounds that no rows could pass the WHERE quals,
which has been possible at least since 3fc6e2d7f. There isn't
anything remaining in the plan tree that would help us, so fall back
to printing the field name as "fN" for the N'th column of the record.
(This will actually be the right thing some of the time, since it
matches the column names we assign to RowExprs.)
In passing, fix a comment typo in create_projection_plan, which
I noticed while experimenting with an alternative fix for this.
Per bug #18576 from Vasya B. Back-patch to all supported branches.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/18576-9feac34e132fea9e@postgresql.org
Trying to attach a table as a partition which is already on the
referenced side of a foreign key on the partitioned table that it is
being attached to, leads to strange behavior: we try to clone the
foreign key from the parent to the partition, but this new FK points to
the partition itself, and the mix of pg_constraint rows and triggers
doesn't behave well.
Rather than trying to untangle the mess (which might be possible given
sufficient time), I opted to forbid the ATTACH. This doesn't seem a
problematic restriction, given that we already fail to create the
foreign key if you do it the other way around, that is, having the
partition first and the FK second.
Backpatch to all supported branches.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://postgr.es/m/18541-628a61bc267cd2d3@postgresql.org
getTimelineHistory() is called twice, to read the source and the
target timeline history files. However, the loop to print the file
with the --debug option used the wrong variable when dealing with the
source. As a result, the source's history was always printed as empty.
Spotted while debugging bug #18575, but this does not fix that bug,
just the debugging output. Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/092dd515-b7b4-4fd0-8407-ceca2f02f6ec@iki.fi
Commit 0b9466fce added a dependency on fe_memutils' pnstrdup() inside
informix.c. This adds an exit() path in a library, which we don't
want. (Unlike libpq, the ecpg libraries don't have an automated check
for that, but it makes sense to keep them to a similar standard.) The
ecpg code can already handle failure results from the *strdup() call
by itself.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/CAOYmi+=pg=W5L1h=3MEP_EB24jaBu2FyATrLXqQHGe7cpuvwyg@mail.gmail.com
If the plancache entry for the CALL statement is already stale,
it's possible for us to fetch an old procedure OID out of it,
and then fail with "cache lookup failed for function NNN".
In ordinary usage this never happens because make_callstmt_target
is called just once immediately after building the plancache
entry. It can be forced however by setting up an erroneous CALL
(that causes make_callstmt_target itself to report an error),
then dropping/recreating the target procedure, then repeating
the erroneous CALL.
To fix, use SPI_plan_get_cached_plan() to fetch the plancache's
plan, rather than assuming we can use SPI_plan_get_plan_sources().
This shouldn't add any noticeable overhead in the normal case,
and in the stale-plan case we'd have had to replan anyway a little
further down.
The other callers of SPI_plan_get_plan_sources() seem OK, because
either they don't need up-to-date plans or they know that the
query was just (re) planned. But add some commentary in hopes
of not falling into this trap again.
Per bug #18574 from Song Hongyu. Back-patch to v14 where this coding
was introduced. (Older branches have comparable code, but it's run
after any required replanning, so there's no issue.)
Discussion: https://postgr.es/m/18574-2ce7ba3249221389@postgresql.org
Replace a static scratch buffer with a local variable, because a
static buffer makes the function not thread-safe. This function is
used in client-code in libpq, so it needs to be thread-safe. It was
until commit b67b57a966, which replaced the implementation with the
one from pgcrypto.
Backpatch to v14, where we switched to the new implementation.
Reviewed-by: Robert Haas, Michael Paquier
Discussion: https://www.postgresql.org/message-id/dfa2015d-ad21-4802-a4cc-3850fc5fff3f@iki.fi
When pg_dump retrieves the list of database objects and performs the
data dump, there was possibility that objects are replaced with others
of the same name, such as views, and access them. This vulnerability
could result in code execution with superuser privileges during the
pg_dump process.
This issue can arise when dumping data of sequences, foreign
tables (only 13 or later), or tables registered with a WHERE clause in
the extension configuration table.
To address this, pg_dump now utilizes the newly introduced
restrict_nonsystem_relation_kind GUC parameter to restrict the
accesses to non-system views and foreign tables during the dump
process. This new GUC parameter is added to back branches too, but
these changes do not require cluster recreation.
Back-patch to all supported branches.
Reviewed-by: Noah Misch
Security: CVE-2024-7348
Backpatch-through: 12
Back-patch of commit cff4e5a3 to 15 and 16, per request from Oleg
Tselebrovskiy. Original commit message:
On other Windows build farm animals it is already skipped because they
don't use UTF-8 encoding. On "hamerkop", UTF-8 is used, and then the
test fails.
It is not clear to me (a non-Windows person looking only at buildfarm
evidence) whether Windows is less sophisticated than other OSes and
doesn't know how to downcase Turkish İ with the standard Unicode
database, or if it is more sophisticated than other systems and uses
locale-specific behavior like ICU does.
Whichever the reason, the result is the same: we need to skip the test
on Windows, just as we already do for ICU, at least until a
Windows-savvy developer comes up with a better idea. The technique for
detecting the OS is borrowed from collate.windows.win1252.sql.
This was anticipated by commit c2e8bd27, but the problem only surfaced
when Windows build farm animals started using Meson.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGJ1LeC3aE2qQYTK95rFVON3ZVoTQpTKJqxkHdtEyawH4A%40mail.gmail.com
This reverts commit 4853630537.
Some buildfarm animals are failing with "cannot change
"client_encoding" during a parallel operation". It looks like
assign_client_encoding is unhappy at being asked to roll back a
client_encoding setting after a parallel worker encounters a
failure. There must be more to it though: why didn't I see this
during local testing? In any case, it's clear that moving the
RestoreGUCState() call is not as side-effect-free as I thought.
Given that the bug f5f30c22e intended to fix has gone unreported
for years, it's not something that's urgent to fix; I'm not
willing to risk messing with it further with only days to our
next release wrap.
Parallel workers failed after a sequence like
BEGIN;
CREATE USER foo;
SET SESSION AUTHORIZATION foo;
because check_session_authorization could not see the uncommitted
pg_authid row for "foo". This is because we ran RestoreGUCState()
in a separate transaction using an ordinary just-created snapshot.
The same disease afflicts any other GUC that requires catalog lookups
and isn't forgiving about the lookups failing.
To fix, postpone RestoreGUCState() into the worker's main transaction
after we've set up a snapshot duplicating the leader's. This affects
check_transaction_isolation and check_transaction_deferrable, which
think they should only run during transaction start. Make them
act like check_transaction_read_only, which already knows it should
silently accept the value when InitializingParallelWorker.
Per bug #18545 from Andrey Rachitskiy. Back-patch to all
supported branches, because this has been wrong for awhile.
Discussion: https://postgr.es/m/18545-feba138862f19aaa@postgresql.org
Prior to this commit, the docs for enable_partitionwise_aggregate and
enable_partitionwise_join mentioned the additional overheads enabling
these causes for the query planner, but they mentioned nothing about the
possible surge in work_mem-consuming executor nodes that could end up in
the final plan. Dimitrios reported the OOM killer intervened on his
query as a result of using enable_partitionwise_aggregate=on.
Here we adjust the docs to mention the possible increase in the number of
work_mem-consuming executor nodes that can appear in the final plan as a
result of enabling these GUCs.
Reported-by: Dimitrios Apostolou
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/3603c380-d094-136e-e333-610914fb3e80%40gmx.net
Discussion: https://postgr.es/m/CAApHDvoZ0_yqwPFEpb6h261L76BUpmh5GxBQq0LeRzQ5Jh3zzg@mail.gmail.com
Backpatch-through: 12, oldest supported version
e2e992820f introduced a test which generated dead tuples for
vacuum with an UPDATE. The test only required enough dead TIDs for two
rounds of index vacuuming. This can be accomplished with a DELETE
instead of an UPDATE -- which generates about 50% less WAL and makes the
test 20% faster in many cases. The test takes several seconds (more on
slow buildfarm animals) because we need quite a few tuples to trigger
two rounds of index vacuuming; so it is worth a follow-on commit to
speed it up.
Suggested-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAAKRu_bWmMjmqL%2BOZ2duEQ80u7cRvpsExLNZNjzk-pXX5skwMQ%40mail.gmail.com
Backpatch-through: 14, the first version containing this test.
pg_size_pretty(bigint) would return the value in bytes rather than PB
for the smallest-most bigint value. This happened due to an incorrect
assumption that the absolute value of -9223372036854775808 could be
stored inside a signed 64-bit type.
Here we fix that by instead storing that value in an unsigned 64-bit type.
This bug does exist in versions prior to 15 but the code there is
sufficiently different and the bug seems sufficiently non-critical that
it does not seem worth risking backpatching further.
Author: Joseph Koshakow <koshy44@gmail.com>
Discussion: https://postgr.es/m/CAAvxfHdTsMZPWEHUrZ=h3cky9Ccc3Mtx2whUHygY+ABP-mCmUw@mail.gmail.com
Backpatch-through: 15
Commit 453c468737 introduced a use of strerror() into libpq, but that
is not thread-safe. Fix by using strerror_r() instead.
In passing, update some of the code comments added by 453c468737, as
we have learned more about the reason for the change in OpenSSL that
started this.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: Discussion: https://postgr.es/m/b6fb018b-f05c-4afd-abd3-318c649faf18@highgo.ca
Michael Paquier