apply_scanjoin_target_to_paths wants to avoid useless work and
platform-specific dependencies by throwing away the path list created
prior to applying the final scan/join target and constructing a whole
new one using the final scan/join target. However, this is only valid
when we'll consider all the same strategies after the pathlist reset
as before.
After resetting the path list, we reconsider Append and MergeAppend
paths with the modified target list; therefore, it's only valid for a
partitioned relation. However, what the previous coding missed is that
it cannot be a partitioned join relation, because that also has paths
that are not Append or MergeAppend paths and will not be reconsidered.
Thus, before this patch, we'd sometimes choose a partitionwise strategy
with a higher total cost than cheapest non-partitionwise strategy,
which is not good.
We had a surprising number of tests cases that were relying on this
bug to work as they did. A big part of the reason for this is that row
counts in regression test cases tend to be low, which brings the cost
of partitionwise and non-partitionwise strategies very close together,
especially for merge joins, where the real and perceived advantages of
a partitionwise approach are minimal. In addition, one test case
included a row-count-inflating join. In such cases, a partitionwise
join can easily be a loser on cost, because the total number of tuples
passing through an Append node is much higher than it is with a
non-partitionwise strategy. That test case is adjusted by adding
additional join clauses to avoid the row count inflation.
Although the failure of the planner to choose the lowest-cost path is a
bug, we generally do not back-patch fixes of this type, because planning
is not an exact science and there is always a possibility that some user
will end up with a plan that has a lower estimated cost but actually
runs more slowly. Hence, no backpatch here, either.
The code change here is exactly what was originally proposed by
Ashutosh, but the changes to the comments and test cases have been
very heavily rewritten by me, helped along by some very useful advice
from Richard Guo.
Reported-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Author: Robert Haas <rhaas@postgresql.org>
Reviewed-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Reviewed-by: Arne Roland <arne.roland@malkut.net>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: http://postgr.es/m/CAExHW5toze58+jL-454J3ty11sqJyU13Sz5rJPQZDmASwZgWiA@mail.gmail.com
Newest versions of gcc are able to detect cases where code implicitly
casts away const by assigning the result of strchr() or a similar
function applied to a "const char *" value to a target variable
that's just "char *". This of course creates a hazard of not getting
a compiler warning about scribbling on a string one was not supposed
to, so fixing up such cases is good.
This patch fixes a dozen or so places where we were doing that.
Most are trivial additions of "const" to the target variable,
since no actually-hazardous change was occurring. There is one
place in ecpg.trailer where we were indeed violating the intention
of not modifying a string passed in as "const char *". I believe
that's harmless not a live bug, but let's fix it by copying the
string before modifying it.
There is a remaining trouble spot in ecpg/preproc/variable.c,
which requires more complex surgery. I've left that out of this
commit because I want to study that code a bit more first.
We probably will want to back-patch this once compilers that detect
this pattern get into wider circulation, but for now I'm just
going to apply it to master to see what the buildfarm says.
Thanks to Bertrand Drouvot for finding a couple more spots than
I had.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/1324889.1764886170@sss.pgh.pa.us
The idea is to encourage more the use of these new routines across the
tree, as these offer stronger type safety guarantees than palloc(). In
an ideal world, palloc() would then act as an internal routine of these
flavors, whose footprint in the tree is minimal.
The patch sent by the author is very large, and this chunk of changes
represents something like 10% of the overall patch submitted.
The code compiled is the same before and after this commit, using
objdump to do some validation with a difference taken in-between. There
are some diffs, which are caused by changes in line numbers because some
of the new allocation formulas are shorter, for the following files:
trgm_regexp.c, xpath.c and pg_walinspect.c.
Author: David Geier <geidav.pg@gmail.com>
Discussion: https://postgr.es/m/ad0748d4-3080-436e-b0bc-ac8f86a3466a@gmail.com
Corey Huinker has come up with a recipe that is more compact and more
pleasant to the eye for extended stats because we know that all of them
are 1-dimension JSON arrays. This commit switches the extended stats
tests to use replace() instead of jsonb_pretty(), splitting the data so
as one line is used for each item in the extended stats object.
This results in the removal of a good chunk of test output, that is now
easier to debug with one line used for each item in a stats object.
This patch has not been provided by Corey. This is some post-commit
cleanup work that I have noticed as good enough to do on its own while
reviewing the rest of the patch set Corey has posted.
Discussion: https://postgr.es/m/CADkLM=csMd52i39Ye8-PUUHyzBb3546eSCUTh-FBQ7bzT2uZ4Q@mail.gmail.com
Commit 76b78721ca introduced two new columns in pg_stat_replication_slots
to improve monitoring of slot synchronization. One of these columns was
named slotsync_skip_at, which is inconsistent with the naming convention
used for similar columns in other system views.
Columns that store timestamps of the most recent event typically use the
'last_' in the column name (e.g., last_autovacuum, checksum_last_failure).
Renaming slotsync_skip_at to slotsync_last_skip aligns with this pattern,
making the purpose of the column clearer and improving overall consistency
across the views.
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Discussion: https://postgr.es/m/20251128091552.GB13635@p46.dedyn.io;lightning.p46.dedyn.io
Discussion: https://postgr.es/m/CAE9k0PkhfKrTEAsGz4DjOhEj1nQ+hbQVfvWUxNacD38ibW3a1g@mail.gmail.com
Some of the buildfarm members with some old gcc versions have been
complaining about an always-true test for a NULL pointer caused by a
combination of SOFT_ERROR_OCCURRED() and a local ErrorSaveContext
variable.
These warnings are taken care of by removing SOFT_ERROR_OCCURRED(),
switching to a direct variable check, like 56b1e88c80.
Oversights in e1405aa5e3 and 44eba8f06e.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1341064.1764895052@sss.pgh.pa.us
This commit adds the version information of a node initialized by
Cluster.pm, that may vary depending on the install_path given by the
test. The code was written so as the node information, that includes
the version number, was dumped before the version number was set.
This is particularly useful for the pg_upgrade TAP tests, that may mix
several versions for cross-version runs. The TAP infrastructure also
allows mixing nodes with different versions, so this information can be
useful for out-of-core tests.
Backpatch down to v15, where Cluster.pm and the pg_upgrade TAP tests
have been introduced.
Author: Potapov Alexander <a.potapov@postgrespro.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/e59bb-692c0a80-5-6f987180@170377126
Backpatch-through: 15
Adjust the prune_freeze_setup() parameter types of new_relfrozen_xid and
new_relmin_mxid to prevent misleading Coverity analysis.
heap_page_prune_and_freeze() compared these values against NULL when
passing them to prune_freeze_setup(), causing Coverity to assume they
could be NULL and flag a possible null-pointer dereference later, even
though it occurs inside a directly related conditional.
Reported-by: Coverity
Author: Melanie Plageman <melanieplageman@gmail.com>
The key is the first member of PrivateRefCountEntry, which has type
Buffer. This commit changes the key size from sizeof(int32) to
sizeof(Buffer). This appears to be an oversight in commit
4b4b680c3d, but it's of no consequence because Buffer has been a
signed 32-bit integer for a long time.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aS77DTpl0fOkIKSZ%40ip-10-97-1-34.eu-west-3.compute.internal
We were using SnapshotAny to do some index checks, but that's wrong and
causes spurious errors when used on indexes created by CREATE INDEX
CONCURRENTLY. Fix it to use an MVCC snapshot, and add a test for it.
This problem came in with commit 5ae2087202, which introduced
uniqueness check. Backpatch to 17.
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Backpatch-through: 17
Discussion: https://postgr.es/m/CANtu0ojmVd27fEhfpST7RG2KZvwkX=dMyKUqg0KM87FkOSdz8Q@mail.gmail.com
Currently, headerscheck and cpluspluscheck are very slow, and they
defeat use of ccache. This fixes that, and now they are much faster.
The problem was that the test files are created in a randomly-named
directory (`mktemp -d /tmp/$me.XXXXXX`), and this directory is
mentioned on the compiler command line, which is part of the cache
key.
The solution is to create the test files in the build directory. For
example, for src/include/storage/ipc.h, we generate
tmp_headerscheck_c/src_include_storage_ipc_h.c (or .cpp)
Now ccache works. (And it's also a bit easier to debug everything
with this naming.)
(The subdirectory is used to keep the cleanup trap simple.)
The observed speedup on Cirrus CI for headerscheck plus cpluspluscheck
is from about 1min 20s to only 20s. In local use, the speedups are
similar.
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/b49e74d4-3cf9-4d1c-9dce-09f75e55d026%40eisentraut.org
The assertion checking MyProcNumber used MaxBackends as the upper
bound, but the procInfos array is allocated with size
MaxBackends + NUM_AUXILIARY_PROCS. This inconsistency would cause
a false assertion failure if an auxiliary process calls WaitForLSN().
Author: Xuneng Zhou <xunengzhou@gmail.com>
In an upcoming patch more wait events will be added to the wait event
class (for buffer locking), making the current name too
specific. Alternatively we could introduce a dedicated wait event class for
those, but it seems somewhat confusing to have a BUFFERPIN and a BUFFER wait
event class.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
Commit 1eccb9315 added a test case that will cause a large number
of evaluations of a plpgsql function. With -DCLOBBER_CACHE_ALWAYS,
that takes an unreasonable amount of time (hours) because the
function's cache entries are repeatedly deleted and rebuilt.
That doesn't add any useful test coverage --- other test cases
already exercise plpgsql well enough --- and it's not part of what
this test intended to cover. We can get the same planner coverage,
if not more, by making the test directly invoke numeric_lt().
Reported-by: Tomas Vondra <tomas@vondra.me>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/baf1ae02-83bd-4f5d-872a-1d04f11a9073@vondra.me
With this commit, the next multixid's offset will always be set on the
offsets page, by the time that a backend might try to read it, so we
no longer need the waiting mechanism with the condition variable. In
other words, this eliminates "corner case 2" mentioned in the
comments.
The waiting mechanism was broken in a few scenarios:
- When nextMulti was advanced without WAL-logging the next
multixid. For example, if a later multixid was already assigned and
WAL-logged before the previous one was WAL-logged, and then the
server crashed. In that case the next offset would never be set in
the offsets SLRU, and a query trying to read it would get stuck
waiting for it. Same thing could happen if pg_resetwal was used to
forcibly advance nextMulti.
- In hot standby mode, a deadlock could happen where one backend waits
for the next multixid assignment record, but WAL replay is not
advancing because of a recovery conflict with the waiting backend.
The old TAP test used carefully placed injection points to exercise
the old waiting code, but now that the waiting code is gone, much of
the old test is no longer relevant. Rewrite the test to reproduce the
IPC/MultixactCreation hang after crash recovery instead, and to verify
that previously recorded multixids stay readable.
Backpatch to all supported versions. In back-branches, we still need
to be able to read WAL that was generated before this fix, so in the
back-branches this includes a hack to initialize the next offsets page
when replaying XLOG_MULTIXACT_CREATE_ID for the last multixid on a
page. On 'master', bump XLOG_PAGE_MAGIC instead to indicate that the
WAL is not compatible.
Author: Andrey Borodin <amborodin@acm.org>
Reviewed-by: Dmitry Yurichev <dsy.075@yandex.ru>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Ivan Bykov <i.bykov@modernsys.ru>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/172e5723-d65f-4eec-b512-14beacb326ce@yandex.ru
Backpatch-through: 14
These were removed in 5dee7a603f, but that was too optimistic, per
buildfarm member prion as reported by Tom Lane. Mea (Álvaro's) culpa.
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Discussion: https://postgr.es/m/570630.1764737028@sss.pgh.pa.us
The majority of cases already used "restartpoint" with just a few
instances of "restart point". Changing the latter spelling to the
former ensures consistency in the user facing documentation. Code
comments are not affected by this since it is not worth the churn
to change anything there.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/0F6E38D0-649F-4489-B2C1-43CD937E6636@yesql.se
The comment for the Pointer type said 'XXX Pointer arithmetic is done
with this, so it can't be void * under "true" ANSI compilers.'. This
has been fixed in the previous commit 756a436893. This now changes
the definition of the type from char * to void *, as envisaged by that
comment.
Extension code that relies on using Pointer for pointer arithmetic
will need to make changes similar to commit 756a436893, but those
changes would be backward compatible.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://www.postgresql.org/message-id/4154950a-47ae-4223-bd01-1235cc50e933%40eisentraut.org
The comment for the Pointer type says 'XXX Pointer arithmetic is done
with this, so it can't be void * under "true" ANSI compilers.'. This
fixes that. Change from Pointer to use char * explicitly where
pointer arithmetic is needed. This makes the meaning of the code
clearer locally and removes a dependency on the actual definition of
the Pointer type. (The definition of the Pointer type is not changed
in this commit.)
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://www.postgresql.org/message-id/4154950a-47ae-4223-bd01-1235cc50e933%40eisentraut.org
Both dsa_get_total_size() and dsa_get_total_size_from_handle() take
an exclusive lock just to read a variable. This commit reduces the
lock level to LW_SHARED in those functions.
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/aS8fMzWs9e8iHxk2%40nathan
amcheck incorrectly reported the following error if there were any
half-dead pages in the index:
ERROR: mismatch between parent key and child high key in index
"amchecktest_id_idx"
It's expected that a half-dead page does not have a downlink in the
parent level, so skip the test.
Reported-by: Konstantin Knizhnik <knizhnik@garret.ru>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Discussion: https://www.postgresql.org/message-id/33e39552-6a2a-46f3-8b34-3f9f8004451f@garret.ru
Backpatch-through: 14
To increase our test coverage in general, and because I will add onto
this in the next commit to also test amcheck with incomplete splits.
This is copied from the similar test we had for GIN indexes. B-tree's
incomplete splits work similarly to GIN's, so with small changes, the
same test works for B-tree too.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://www.postgresql.org/message-id/abd65090-5336-42cc-b768-2bdd66738404@iki.fi
Presently, this view reports NULL for the size of DSAs and dshash
tables because 1) the current backend might not be attached to them
and 2) the registry doesn't save the pointers to the dsa_area or
dshash_table in local memory. Also, the view doesn't show
partially-initialized entries to avoid ambiguity, since those
entries would report a NULL size as well.
This commit introduces a function that looks up the size of a DSA
given its handle (transiently attaching to the control segment if
needed) and teaches pg_dsm_registry_allocations to use it to show
the size of successfully-initialized DSA and dshash entries.
Furthermore, the view now reports partially-initialized entries
with a NULL size.
Reviewed-by: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/aSeEDeznAsHR1_YF%40nathan
This idea (implemented in commits and bc32a12e0d and 9e8fa05d34) of
using notices to detect that a session is sleeping was unreliable, so
simplify the concurrency controller session to just look at
pg_stat_activity for a process sleeping on the injection point we want
it to hit. This change allows us to remove a secondary injection point
and the alternative expected output files.
Reproduced by Alexander Lakhin following a report in buildfarm member
skink (which runs the server under valgrind).
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/3e302c96-cdd2-45ec-af84-03dbcdccde4a@gmail.com
When planning queries with ON CONFLICT on partitioned tables, the
indexes to consider as arbiters for each partition are determined based
on those found in the parent table. However, it's possible for an index
on a partition to be reindexed, and in that case, the auxiliary indexes
created on the partition must be considered as arbiters as well; failing
to do that may result in spurious "duplicate key" errors given
sufficient bad luck.
We fix that in this commit by matching every index that doesn't have a
parent to each initially-determined arbiter index. Every unparented
matching index is considered an additional arbiter index.
Closely related to the fixes in bc32a12e0d and 2bc7e886fc, and for
identical reasons, not backpatched (for now) even though it's a
longstanding issue.
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CANtu0ojXmqjmEzp-=aJSxjsdE76iAsRgHBoK0QtYHimb_mEfsg@mail.gmail.com
This removes some casts where the input already has the same type as
the type specified by the cast. Their presence could cause risks of
hiding actual type mismatches in the future or silently discarding
qualifiers. It also improves readability. Same kind of idea as
7f798aca1d and ef8fe69360. (This does not change all such
instances, but only those hand-picked by the author.)
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/aSQy2JawavlVlEB0%40ip-10-97-1-34.eu-west-3.compute.internal
Instead of complicated pointer arithmetic, overlay a uint32 array and
just access the array members. That's safe thanks to
XLogRecGetBlockData() returning a MAXALIGNed buffer.
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/aSQy2JawavlVlEB0%40ip-10-97-1-34.eu-west-3.compute.internal
One could do more work here to eliminate the Windows difference
described in the comment, but that can be a separate project. The
purpose of this change is to update comments that might confusingly
indicate that C99 is not required.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/170308e6-a7a3-4484-87b2-f960bb564afa%40eisentraut.org
This commit updates two functions that convert "timestamptz" to
"timestamp", and vice-versa, to use the soft error reporting rather than
a their own logic to do the same. These are now named as follows:
- timestamp2timestamptz_safe()
- timestamptz2timestamp_safe()
These functions were suffixed with "_opt_overflow", previously.
This shaves some code, as it is possible to detect how a timestamp[tz]
overflowed based on the returned value rather than a custom state. It
is optionally possible for the callers of these functions to rely on the
error generated internally by these functions, depending on the error
context.
Similar work has been done in d03668ea05 and 4246a977ba.
Reviewed-by: Amul Sul <sulamul@gmail.com>
Discussion: https://postgr.es/m/aS09YF2GmVXjAxbJ@paquier.xyz
The regex mechanism scans through the first "max_chr" character values
to cache character property ranges (isalpha, etc.). For single-byte
encodings, there's no sense in scanning beyond UCHAR_MAX; but for
UTF-8 it makes sense to cache higher code point values (though not all
of them; only up to MAX_SIMPLE_CHR).
Prior to 5a38104b36, the logic about how many character values to scan
was based on the pg_regex_strategy, which was dependent on the
provider. Commit 5a38104b36 preserved that logic exactly, allowing
different providers to define the "max_chr".
Now, change it to depend only on the encoding and whether
ctype_is_c. For this specific calculation, distinguishing between
providers creates more complexity than it's worth.
Discussion: https://postgr.es/m/450ceb6260cad30d7afdf155d991a9caafee7c0d.camel@j-davis.com
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
When REINDEX CONCURRENTLY is processing the index that supports a
constraint, there are periods during which multiple indexes match the
constraint index's definition. Those must all be included in the set of
inferred index for INSERT ON CONFLICT, in order to avoid spurious
"duplicate key" errors.
To fix, we set things up to match all indexes against attributes,
expressions and predicates of the constraint index, then return all
indexes that match those, rather than just the one constraint index.
This is more onerous than before, where we would just test the named
constraint for validity, but it's not more onerous than processing
"conventional" inference (where a list of attribute names etc is given).
This is closely related to the misbehaviors fixed by bc32a12e0d, for a
different situation. We're not backpatching this one for now either,
for the same reasons.
Author: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CANtu0ojXmqjmEzp-=aJSxjsdE76iAsRgHBoK0QtYHimb_mEfsg@mail.gmail.com
Nathan Bossart