This avoids additional translatable strings for each distinct type, as
well as making our quoting style around type names more consistent
(namely, that we don't quote type names). This continues what started
as f402b99501.
Discussion: https://postgr.es/m/20160401170642.GA57509@alvherre.pgsql
This resulted in failures depending on the order of "locale -a" output.
The original coding in initdb sorted the results, but that should be
unnecessary as long as "locale -a" doesn't print duplicate names. The
original entries will then all be non-dups, and while we might generate
duplicate aliases by stripping, they should be for different encodings and
thus not conflict. Even if the latter assumption fails somehow, it won't
be fatal because we're using if_not_exists mode for the aliases.
Discussion: https://postgr.es/m/26116.1484751196%40sss.pgh.pa.us
In an RLS query, we must ensure that security filter quals are evaluated
before ordinary query quals, in case the latter contain "leaky" functions
that could expose the contents of sensitive rows. The original
implementation of RLS planning ensured this by pushing the scan of a
secured table into a sub-query that it marked as a security-barrier view.
Unfortunately this results in very inefficient plans in many cases, because
the sub-query cannot be flattened and gets planned independently of the
rest of the query.
To fix, drop the use of sub-queries to enforce RLS qual order, and instead
mark each qual (RestrictInfo) with a security_level field establishing its
priority for evaluation. Quals must be evaluated in security_level order,
except that "leakproof" quals can be allowed to go ahead of quals of lower
security_level, if it's helpful to do so. This has to be enforced within
the ordering of any one list of quals to be evaluated at a table scan node,
and we also have to ensure that quals are not chosen for early evaluation
(i.e., use as an index qual or TID scan qual) if they're not allowed to go
ahead of other quals at the scan node.
This is sufficient to fix the problem for RLS quals, since we only support
RLS policies on simple tables and thus RLS quals will always exist at the
table scan level only. Eventually these qual ordering rules should be
enforced for join quals as well, which would permit improving planning for
explicit security-barrier views; but that's a task for another patch.
Note that FDWs would need to be aware of these rules --- and not, for
example, send an insecure qual for remote execution --- but since we do
not yet allow RLS policies on foreign tables, the case doesn't arise.
This will need to be addressed before we can allow such policies.
Patch by me, reviewed by Stephen Frost and Dean Rasheed.
Discussion: https://postgr.es/m/8185.1477432701@sss.pgh.pa.us
Move this logic out of initdb into a user-callable function. This
simplifies the code and makes it possible to update the standard
collations later on if additional operating system collations appear.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Euler Taveira <euler@timbira.com.br>
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
The operators money*int8, int8*money, and money/int8 were implemented in
code but not registered in pg_operator or pg_proc.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Between 6eeb95f0f5 and
7b1c2a0f20, builtins.h contained
additional prototypes that have now been moved elsewhere, so we don't
need to include nodes/parsenodes.h anymore.
Fix some files that were relying on builtins.h implicitly pulling in
some unrelated stuff they needed.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Previously multiple sessions could execute pg_start_backup() and
pg_stop_backup() to start and stop an exclusive backup at the same time.
This could trigger the assertion failure of
"FailedAssertion("!(XLogCtl->Insert.exclusiveBackup)".
This happend because, even while pg_start_backup() was starting
an exclusive backup, other session could run pg_stop_backup()
concurrently and mark the backup as not-in-progress unconditionally.
This patch introduces ExclusiveBackupState indicating the state of
an exclusive backup. This state is used to ensure that there is only
one session running pg_start_backup() or pg_stop_backup() at
the same time, to avoid the assertion failure.
Back-patch to all supported versions.
Author: Michael Paquier
Reviewed-By: Kyotaro Horiguchi and me
Reported-By: Andreas Seltenreich
Discussion: <87mvktojme.fsf@credativ.de>
INSERT ... VALUES with a single VALUES row is implemented quite differently
from the general VALUES case. A user-visible implication of that is that
we accept SRFs in the single-row case, but not in the multi-row case.
That's a historical artifact no doubt, but in view of the lack of field
complaints, I'm not excited about fixing it right now.
However, check_srf_call_placement() needs to know about this, first because
it should throw an error in the unsupported case, and second because it
should set p_hasTargetSRFs in the single-row case (because we treat that
like a SELECT tlist). That's an oversight in commit a4c35ea1c.
To fix, split EXPR_KIND_VALUES into two values. So far as I can see,
this is the only place where we need to distinguish the two cases at
present; but there might be more later.
Patch by me, per report from Andres Freund.
Discussion: https://postgr.es/m/20170116081548.zg63zltblwimpfgp@alap3.anarazel.de
Temporary replication slots will be used by default when wal streaming
is used and no slot name is specified with -S. If a slot name is
specified, then a permanent slot with that name is used. If --no-slot is
specified, then no permanent or temporary slot will be used.
Temporary slots are only used on 10.0 and newer, of course.
Normally, if we have a WHERE clause like "indexcol = constant",
the planner will figure out that that index column can be ignored
when determining whether the index has a desired sort ordering.
But this failed to work for boolean index columns, because a
condition like "boolcol = true" is canonicalized to just "boolcol"
which does not give rise to an EquivalenceClass. Add a check to
allow the same type of deduction to be made in this case too.
Per a complaint from Dima Pavlov. Arguably this is a bug, but given the
limited impact and the small number of complaints so far, I won't risk
destabilizing plans in stable branches by back-patching.
Patch by me, reviewed by Michael Paquier
Discussion: https://postgr.es/m/1788.1481605684@sss.pgh.pa.us
Make use of the statement boundary info added by commit ab1f0c822
to let pg_stat_statements behave more sanely when multiple SQL queries
are jammed into one query string. It now records just the relevant
part of the source string, not the whole thing, for each individual
query.
Even when no multi-statement strings are involved, users may notice small
changes in the output: leading and trailing whitespace and semicolons will
be stripped from statements, which did not happen before.
Also, significantly expand pg_stat_statements' regression test script.
Fabien Coelho, reviewed by Craig Ringer and Kyotaro Horiguchi,
some mods by me
Discussion: https://postgr.es/m/alpine.DEB.2.20.1612200926310.29821@lancre
This patch makes several changes that improve the consistency of
representation of lists of statements. It's always been the case
that the output of parse analysis is a list of Query nodes, whatever
the types of the individual statements in the list. This patch brings
similar consistency to the outputs of raw parsing and planning steps:
* The output of raw parsing is now always a list of RawStmt nodes;
the statement-type-dependent nodes are one level down from that.
* The output of pg_plan_queries() is now always a list of PlannedStmt
nodes, even for utility statements. In the case of a utility statement,
"planning" just consists of wrapping a CMD_UTILITY PlannedStmt around
the utility node. This list representation is now used in Portal and
CachedPlan plan lists, replacing the former convention of intermixing
PlannedStmts with bare utility-statement nodes.
Now, every list of statements has a consistent head-node type depending
on how far along it is in processing. This allows changing many places
that formerly used generic "Node *" pointers to use a more specific
pointer type, thus reducing the number of IsA() tests and casts needed,
as well as improving code clarity.
Also, the post-parse-analysis representation of DECLARE CURSOR is changed
so that it looks more like EXPLAIN, PREPARE, etc. That is, the contained
SELECT remains a child of the DeclareCursorStmt rather than getting flipped
around to be the other way. It's now true for both Query and PlannedStmt
that utilityStmt is non-null if and only if commandType is CMD_UTILITY.
That allows simplifying a lot of places that were testing both fields.
(I think some of those were just defensive programming, but in many places,
it was actually necessary to avoid confusing DECLARE CURSOR with SELECT.)
Because PlannedStmt carries a canSetTag field, we're also able to get rid
of some ad-hoc rules about how to reconstruct canSetTag for a bare utility
statement; specifically, the assumption that a utility is canSetTag if and
only if it's the only one in its list. While I see no near-term need for
relaxing that restriction, it's nice to get rid of the ad-hocery.
The API of ProcessUtility() is changed so that what it's passed is the
wrapper PlannedStmt not just the bare utility statement. This will affect
all users of ProcessUtility_hook, but the changes are pretty trivial; see
the affected contrib modules for examples of the minimum change needed.
(Most compilers should give pointer-type-mismatch warnings for uncorrected
code.)
There's also a change in the API of ExplainOneQuery_hook, to pass through
cursorOptions instead of expecting hook functions to know what to pick.
This is needed because of the DECLARE CURSOR changes, but really should
have been done in 9.6; it's unlikely that any extant hook functions
know about using CURSOR_OPT_PARALLEL_OK.
Finally, teach gram.y to save statement boundary locations in RawStmt
nodes, and pass those through to Query and PlannedStmt nodes. This allows
more intelligent handling of cases where a source query string contains
multiple statements. This patch doesn't actually do anything with the
information, but a follow-on patch will. (Passing this information through
cleanly is the true motivation for these changes; while I think this is all
good cleanup, it's unlikely we'd have bothered without this end goal.)
catversion bump because addition of location fields to struct Query
affects stored rules.
This patch is by me, but it owes a good deal to Fabien Coelho who did
a lot of preliminary work on the problem, and also reviewed the patch.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1612200926310.29821@lancre
A client copy can't work inside a function because the FE/BE wire protocol
doesn't support nesting of a COPY operation within query results. (Maybe
it could, but the protocol spec doesn't suggest that clients should support
this, and libpq for one certainly doesn't.)
In most PLs, this prohibition is enforced by spi.c, but SQL functions don't
use SPI. A comparison of _SPI_execute_plan() and init_execution_state()
shows that rejecting client COPY is the only discrepancy in what they
allow, so there's no other similar bugs.
This is an astonishingly ancient oversight, so back-patch to all supported
branches.
Report: https://postgr.es/m/BY2PR05MB2309EABA3DEFA0143F50F0D593780@BY2PR05MB2309.namprd05.prod.outlook.com
This changes the default values of the following parameters:
wal_level = replica
max_wal_senders = 10
max_replication_slots = 10
in order to make it possible to make a backup and set up simple
replication on the default settings, without requiring a system restart.
Discussion: https://postgr.es/m/CABUevEy4PR_EAvZEzsbF5s+V0eEvw7shJ2t-AUwbHOjT+yRb3A@mail.gmail.com
Reviewed by Peter Eisentraut. Benchmark help from Tomas Vondra.
The different actions in pg_ctl had different defaults for -w and -W,
mostly for historical reasons. Most users will want the -w behavior, so
make that the default.
Remove the -w option in most example and test code, so avoid confusion
and reduce verbosity. pg_upgrade is not touched, so it can continue to
work with older installations.
Reviewed-by: Beena Emerson <memissemerson@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
Various example and test code used -m fast explicitly, but since it's
the default, this can be omitted now or should be replaced by a better
example.
pg_upgrade is not touched, so it can continue to operate with older
installations.
Commit 0563a3a8b just introduced another instance of the same unsafe
testing methodology that appeared in 2ac3ef7a0, which I corrected in
257d81572. Robert/Amit, please stop doing that.
Also look through the rest of f0e44751d's test cases, and correct some
other queries with underdetermined ordering of results from the system
catalogs. These haven't failed in the buildfarm yet, but I don't
have any confidence in that staying true.
Per multiple buildfarm members.
This fixes a portability issue introduced by commit 961bed020: with a
compiler that doesn't support PG_FUNCNAME_MACRO, the "funcname" field of
errorCode won't be provided, leading to a failure of the unset command.
I added -nocomplain to the unset commands for filename and lineno too, just
in case, though I know of no platform that wouldn't populate those fields.
(BTW, -nocomplain is new in Tcl 8.4, but fortunately we dropped support
for pre-8.4 Tcl some time ago.)
Per buildfarm member pademelon.
In 9.5, the default pg_ctl stop mode was changed from "smart" to "fast".
pg_upgrade still thought the default mode was "smart" and only specified
the mode when "fast" was asked for. This results in using "fast" all
the time. It's not clear what the effect in practice is, but fix it
nonetheless to restore the previous behavior.
Move the code for doing parent attnos to child attnos mapping for Vars
in partition constraint expressions to a separate function
map_partition_varattnos() and call it from the appropriate places.
Doing it in get_qual_from_partbound(), as is now, would produce wrong
result in certain multi-level partitioning cases, because it only
considers the current pair of parent-child relations. In certain
multi-level partitioning cases, attnums for the same key attribute(s)
might differ between various levels causing the same attribute to be
numbered differently in different instances of the Var corresponding
to a given attribute.
With this commit, in generate_partition_qual(), we first generate the
the whole partition constraint (considering all levels of partitioning)
and then do the mapping, so that Vars in the final expression are
numbered according the leaf relation (to which it is supposed to apply).
Amit Langote, reviewed by me.
For a partial path, the cardinality estimate needs to reflect the
number of rows we think each worker will see, rather than the total
number of rows; otherwise, costing will go wrong. The previous coding
got this completely wrong for parallel joins.
Unfortunately, this change may destabilize plans for users of 9.6 who
have enabled parallel query, but since 9.6 is still fairly new I'm
hoping expectations won't be too settled yet. Also, this is really a
brown-paper-bag bug, so leaving it unfixed for the entire lifetime of
9.6 seems unwise.
Related reports (whose import I initially failed to recognize) by
Tomas Vondra and Tom Lane.
Discussion: http://postgr.es/m/CA+TgmoaDxZ5z5Kw_oCQoymNxNoVaTCXzPaODcOuao=CzK8dMZw@mail.gmail.com
Somebody failed to grasp the point of having the #ifdef CATCACHE_STATS
fields at the end of the struct. Put that back the way it should be,
and add a comment making it more explicit why it should be that way.
pg_restore will currently accept invalid values for the number of
parallel jobs to run (eg: -1), unlike pg_dump which does check that the
value provided is reasonable.
Worse, '-1' is actually a valid, independent, parameter (as an alias for
--single-transaction), leading to potentially completely unexpected
results from a command line such as:
-> pg_restore -j -1
Where a user would get neither parallel jobs nor a single-transaction.
Add in validity checking of the parallel jobs option, as we already have
in pg_dump, before we try to open up the archive. Also move the check
that we haven't been asked to run more parallel jobs than possible on
Windows to the same place, so we do all the option validity checking
before opening the archive.
Back-patch all the way, though for 9.2 we're adding the Windows-specific
check against MAXIMUM_WAIT_OBJECTS as that check wasn't back-patched
originally.
Discussion: https://www.postgresql.org/message-id/20170110044815.GC18360%40tamriel.snowman.net
The previous --path documentation and --help output were wrong in both
its meaning and the defaults.
Reviewed-by: Michael Paquier
Backpatch-through: 9.6
When using pg_dump --strict-names and a schema pattern which doesn't
match any schemas (eg: --schema='nonexistant*'), we were incorrectly
throwing an error claiming no tables were found when, really, there
were no schemas found:
-> pg_dump --strict-names --schema='nonexistant*'
pg_dump: no matching tables were found for pattern "nonexistant*"
Fix that by changing the error message to say 'schemas' instead, since
that is what we are actually complaining about.
Noticed while testing pg_dump error cases.
Back-patch to 9.6 where --strict-names and this error message were
introduced.
Instead of relying on the page contents to know whether we have
advanced from the primary bucket page to an overflow page, track
that explicitly.
Amit Kapila, per a complaint by me.
Including the program name twice is not helpful:
-> pg_dump -j -1
pg_dump: pg_dump: invalid number of parallel jobs
Correct by removing the progname from the exit_horribly() call used when
validating the number of parallel jobs.
Noticed while testing various pg_dump error cases.
Back-patch to 9.3 where parallel pg_dump was added.
We can't throw elog(ERROR) out of a Tcl command procedure; we have
to catch the error and return TCL_ERROR to the Tcl interpreter.
pltcl_returnnext failed to meet this requirement, so that errors
detected by pltcl_build_tuple_result or other functions called here
led to longjmp'ing out of the Tcl interpreter and thereby leaving it
in a bad state. Use the existing subtransaction support to prevent
that. Oversight in commit 26abb50c4, found more or less accidentally
by the buildfarm thanks to the tests added in 961bed020.
Report: https://postgr.es/m/30647.1483989734@sss.pgh.pa.us
If inherited tables don't have exactly the same schema, the USING clause
in an ALTER TABLE / SET DATA TYPE misbehaves when applied to the
children tables since commit 9550e8348b. Starting with that commit,
the attribute numbers in the USING expression are fixed during parse
analysis. This can lead to bogus errors being reported during
execution, such as:
ERROR: attribute 2 has wrong type
DETAIL: Table has type smallint, but query expects integer.
Since it wouldn't do to revert to the original coding, we now apply a
transformation to map the attribute numbers to the correct ones for each
child.
Reported by Justin Pryzby
Analysis by Tom Lane; patch by me.
Discussion: https://postgr.es/m/20170102225618.GA10071@telsasoft.com
Robert Haas