335 Commits (d8a295389baee766df882f8f934e205b5978b529)

Author	SHA1	Message	Date
David Rowley	d8a295389b	Strip off ORDER BY/DISTINCT aggregate pathkeys in create_agg_path ... 1349d2790 added code to adjust the PlannerInfo.group_pathkeys so that ORDER BY / DISTINCT aggregate functions could obtain pre-sorted inputs to allow faster execution. That commit forgot to adjust the pathkeys in create_agg_path(). Some code in there assumed that it was always fine to make the AggPath's pathkeys the same as its subpath's. That seems to have been ok up until 1349d2790, but since that commit adds pathkeys for columns which are within the aggregate function, those columns won't be available above the aggregate node. This can result in "could not find pathkey item to sort" during create_plan(). The fix here is to strip off the additional pathkeys added by adjust_group_pathkeys_for_groupagg(). It seems that the pathkeys here will only ever be group_pathkeys, so all we need to do is check if the length of the pathkey list is longer than the num_groupby_pathkeys and get rid of the additional ones only if we see extras. Reported-by: Justin Pryzby Reviewed-by: Richard Guo Discussion: https://postgr.es/m/ZQhYYRhUxpW3PSf9%40telsasoft.com Backpatch-through: 16, where 1349d2790 was introduced	2 years ago
Etsuro Fujita	9e9931d2bf	Re-allow FDWs and custom scan providers to replace joins with pseudoconstant quals. ... This was disabled in commit 6f80a8d9c due to the lack of support for handling of pseudoconstant quals assigned to replaced joins in createplan.c. To re-allow it, this patch adds the support by 1) modifying the ForeignPath and CustomPath structs so that if they represent foreign and custom scans replacing a join with a scan, they store the list of RestrictInfo nodes to apply to the join, as in JoinPaths, and by 2) modifying create_scan_plan() in createplan.c so that it uses that list in that case, instead of the baserestrictinfo list, to get pseudoconstant quals assigned to the join, as mentioned in the commit message for that commit. Important item for the release notes: this is non-backwards-compatible since it modifies the ForeignPath and CustomPath structs, as mentioned above, and changes the argument lists for FDW helper functions create_foreignscan_path(), create_foreign_join_path(), and create_foreign_upper_path(). Richard Guo, with some additional changes by me, reviewed by Nishant Sharma, Suraj Kharage, and Richard Guo. Discussion: https://postgr.es/m/CADrsxdbcN1vejBaf8a%2BQhrZY5PXL-04mCd4GDu6qm6FigDZd6Q%40mail.gmail.com	2 years ago
David Rowley	3900a02c97	Account for startup rows when costing WindowAggs ... Here we adjust the costs for WindowAggs so that they properly take into account how much of their subnode they must read before outputting the first row. Without this, we always assumed that the startup cost for the WindowAgg was not much more expensive than the startup cost of its subnode, however, that's going to be completely wrong in many cases. The WindowAgg may have to read *all* of its subnode to output a single row with certain window bound options. Here we estimate how many rows we'll need to read from the WindowAgg's subnode and proportionally add more of the subnode's run costs onto the WindowAgg's startup costs according to how much of it we expect to have to read in order to produce the first WindowAgg row. The reason this is more important than we might have initially thought is that we may end up making use of a path from the lower planner that works well as a cheap startup plan when the query has a LIMIT clause, however, the WindowAgg might mean we need to read far more rows than what the LIMIT specifies. No backpatch on this so as not to cause plan changes in released versions. Bug: #17862 Reported-by: Tim Palmer Author: David Rowley Reviewed-by: Andy Fan Discussion: https://postgr.es/m/17862-1ab8f74b0f7b0611@postgresql.org Discussion: https://postgr.es/m/CAApHDvrB0S5BMv+0-wTTqWFE-BJ0noWqTnDu9QQfjZ2VSpLv_g@mail.gmail.com	2 years ago
Tom Lane	e08d74ca13	Allow plan nodes with initPlans to be considered parallel-safe. ... If the plan itself is parallel-safe, and the initPlans are too, there's no reason anymore to prevent the plan from being marked parallel-safe. That restriction (dating to commit ab77a5a45) was really a special case of the fact that we couldn't transmit subplans to parallel workers at all. We fixed that in commit 5e6d8d2bb and follow-ons, but this case never got addressed. We still forbid attaching initPlans to a Gather node that's inserted pursuant to debug_parallel_query = regress. That's because, when we hide the Gather from EXPLAIN output, we'd hide the initPlans too, causing cosmetic regression diffs. It seems inadvisable to kluge EXPLAIN to the extent required to make the output look the same, so just don't do it in that case. Along the way, this also takes care of some sloppiness about updating path costs to match when we move initplans from one place to another during createplan.c and setrefs.c. Since all the planning decisions are already made by that point, this is just cosmetic; but it seems good to keep EXPLAIN output consistent with where the initplans are. The diff in query_planner() might be worth remarking on. I found that one because after fixing things to allow parallel-safe initplans, one partition_prune test case changed plans (as shown in the patch) --- but only when debug_parallel_query was active. The reason proved to be that we only bothered to mark Result nodes as potentially parallel-safe when debug_parallel_query is on. This neglects the fact that parallel-safety may be of interest for a sub-query even though the Result itself doesn't parallelize. Discussion: https://postgr.es/m/1129530.1681317832@sss.pgh.pa.us	3 years ago
Tom Lane	88ceac5d77	Fix parallel-safety marking when moving initplans to another node. ... Our policy since commit ab77a5a45 has been that a plan node having any initplans is automatically not parallel-safe. (This could be relaxed, but not today.) clean_up_removed_plan_level neglected this, and could attach initplans to a parallel-safe child plan node without clearing the plan's parallel-safe flag. That could lead to "subplan was not initialized" errors at runtime, in case an initplan referenced another one and only the referencing one got transmitted to parallel workers. The fix in clean_up_removed_plan_level is trivial enough. materialize_finished_plan also moves initplans from one node to another, but it's okay because it already copies the source node's parallel_safe flag. The other place that does this kind of thing is standard_planner's hack to inject a top-level Gather when debug_parallel_query is active. But that's actually dead code given that we're correctly enforcing the "initplans aren't parallel safe" rule, so just replace it with an Assert that there are no initplans. Also improve some related comments. Normally we'd add a regression test case for this sort of bug. The mistake itself is already reached by existing tests, but there is accidentally no visible problem. The only known test case that creates an actual failure seems too indirect and fragile to justify keeping it as a regression test (not least because it fails to fail in v11, though the bug is clearly present there too). Per report from Justin Pryzby. Back-patch to all supported branches. Discussion: https://postgr.es/m/ZDVt6MaNWkRDO1LQ@telsasoft.com	3 years ago
Tom Lane	9bfd2822b3	Enable use of Memoize atop an Append that came from UNION ALL. ... create_append_path() would only apply get_baserel_parampathinfo when the path is for a partitioned table, but it's also potentially useful for paths for UNION ALL appendrels. Specifically, that supports building a Memoize path atop this one. While we're in the vicinity, delete some dead code in create_merge_append_plan(): there's no need for it to support parameterized MergeAppend paths, and it doesn't look like that is going to change anytime soon. It'll be easy enough to undo this when/if it becomes useful. Richard Guo Discussion: https://postgr.es/m/CAMbWs4_ABSu4PWG2rE1q10tJugEXHWgru3U8dAgkoFvgrb6aEA@mail.gmail.com	3 years ago
Tom Lane	6b661b01f4	Remove local optimizations of empty Bitmapsets into null pointers. ... These are all dead code now that it's done centrally. Patch by me; thanks to Nathan Bossart and Richard Guo for review. Discussion: https://postgr.es/m/1159933.1677621588@sss.pgh.pa.us	3 years ago
David Rowley	e9aaf06328	Remove dead NoMovementScanDirection code ... Here remove some dead code from heapgettup() and heapgettup_pagemode() which was trying to support NoMovementScanDirection scans. This code can never be reached as standard_ExecutorRun() never calls ExecutePlan with NoMovementScanDirection. Additionally, plans which were scanning an unordered index would use NoMovementScanDirection rather than ForwardScanDirection. There was no real need for this, so here we adjust this so we use ForwardScanDirection for unordered index scans. A comment in pathnodes.h claimed that NoMovementScanDirection was used for PathKey reasons, but if that was true, it no longer is, per code in build_index_paths(). This does change the non-text format of the EXPLAIN output so that unordered index scans now have a "Forward" scan direction rather than "NoMovement". The text format of EXPLAIN has not changed. Author: Melanie Plageman Reviewed-by: Tom Lane, David Rowley Discussion: https://postgr.es/m/CAAKRu_bvkhka0CZQun28KTqhuUh5ZqY=_T8QEqZqOL02rpi2bw@mail.gmail.com	3 years ago
Tom Lane	2489d76c49	Make Vars be outer-join-aware. ... Traditionally we used the same Var struct to represent the value of a table column everywhere in parse and plan trees. This choice predates our support for SQL outer joins, and it's really a pretty bad idea with outer joins, because the Var's value can depend on where it is in the tree: it might go to NULL above an outer join. So expression nodes that are equal() per equalfuncs.c might not represent the same value, which is a huge correctness hazard for the planner. To improve this, decorate Var nodes with a bitmapset showing which outer joins (identified by RTE indexes) may have nulled them at the point in the parse tree where the Var appears. This allows us to trust that equal() Vars represent the same value. A certain amount of klugery is still needed to cope with cases where we re-order two outer joins, but it's possible to make it work without sacrificing that core principle. PlaceHolderVars receive similar decoration for the same reason. In the planner, we include these outer join bitmapsets into the relids that an expression is considered to depend on, and in consequence also add outer-join relids to the relids of join RelOptInfos. This allows us to correctly perceive whether an expression can be calculated above or below a particular outer join. This change affects FDWs that want to plan foreign joins. They *must* follow suit when labeling foreign joins in order to match with the core planner, but for many purposes (if postgres_fdw is any guide) they'd prefer to consider only base relations within the join. To support both requirements, redefine ForeignScan.fs_relids as base+OJ relids, and add a new field fs_base_relids that's set up by the core planner. Large though it is, this commit just does the minimum necessary to install the new mechanisms and get check-world passing again. Follow-up patches will perform some cleanup. (The README additions and comments mention some stuff that will appear in the follow-up.) Patch by me; thanks to Richard Guo for review. Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us	3 years ago
Bruce Momjian	c8e1ba736b	Update copyright for 2023 ... Backpatch-through: 11	3 years ago
Tom Lane	d69d01ba9d	Fix Memoize to work with partitionwise joining. ... A couple of places weren't up to speed for this. By sheer good luck, we didn't fail but just selected a non-memoized join plan, at least in the test case we have. Nonetheless, it's a bug, and I'm not quite sure that it couldn't have worse consequences in other examples. So back-patch to v14 where Memoize came in. Richard Guo Discussion: https://postgr.es/m/CAMbWs48GkNom272sfp0-WeD6_0HSR19BJ4H1c9ZKSfbVnJsvRg@mail.gmail.com	3 years ago
Tom Lane	e76913802c	Fix broken MemoizePath support in reparameterize_path(). ... It neglected to recurse to the subpath, meaning you'd get back a path identical to the input. This could produce wrong query results if the omission meant that the subpath fails to enforce some join clause it should be enforcing. We don't have a test case for this at the moment, but the code is obviously broken and the fix is equally obvious. Back-patch to v14 where Memoize was introduced. Richard Guo Discussion: https://postgr.es/m/CAMbWs4_R=ORpz=Lkn2q3ebPC5EuWyfZF+tmfCPVLBVK5W39mHA@mail.gmail.com	3 years ago
Tom Lane	6eb2f0ed4c	Add missing MaterialPath support in reparameterize_path[_by_child]. ... These two functions failed to cover MaterialPath. That's not a fatal problem, but we can generate better plans in some cases if we support it. Tom Lane and Richard Guo Discussion: https://postgr.es/m/1854233.1669949723@sss.pgh.pa.us	3 years ago
Alvaro Herrera	3b2db22fe2	Update some comments that should've covered MERGE ... Oversight in 7103ebb7aa. Backpatch to 15. Author: Richard Guo <guofenglinux@gmail.com> Discussion: https://postgr.es/m/CAMbWs48gnDjZXq3-b56dVpQCNUJ5hD9kdtWN4QFwKCEapspNsA@mail.gmail.com	3 years ago
Tom Lane	f4c7c410ee	Revert "Optimize order of GROUP BY keys". ... This reverts commit db0d67db24 and several follow-on fixes. The idea of making a cost-based choice of the order of the sorting columns is not fundamentally unsound, but it requires cost information and data statistics that we don't really have. For example, relying on procost to distinguish the relative costs of different sort comparators is pretty pointless so long as most such comparator functions are labeled with cost 1.0. Moreover, estimating the number of comparisons done by Quicksort requires more than just an estimate of the number of distinct values in the input: you also need some idea of the sizes of the larger groups, if you want an estimate that's good to better than a factor of three or so. That's data that's often unknown or not very reliable. Worse, to arrive at estimates of the number of calls made to the lower-order-column comparison functions, the code needs to make estimates of the numbers of distinct values of multiple columns, which are necessarily even less trustworthy than per-column stats. Even if all the inputs are perfectly reliable, the cost algorithm as-implemented cannot offer useful information about how to order sorting columns beyond the point at which the average group size is estimated to drop to 1. Close inspection of the code added by db0d67db2 shows that there are also multiple small bugs. These could have been fixed, but there's not much point if we don't trust the estimates to be accurate in-principle. Finally, the changes in cost_sort's behavior made for very large changes (often a factor of 2 or so) in the cost estimates for all sorting operations, not only those for multi-column GROUP BY. That naturally changes plan choices in many situations, and there's precious little evidence to show that the changes are for the better. Given the above doubts about whether the new estimates are really trustworthy, it's hard to summon much confidence that these changes are better on the average. Since we're hard up against the release deadline for v15, let's revert these changes for now. We can always try again later. Note: in v15, I left T_PathKeyInfo in place in nodes.h even though it's unreferenced. Removing it would be an ABI break, and it seems a bit late in the release cycle for that. Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com	3 years ago
Tom Lane	2f17b57017	Improve performance of adjust_appendrel_attrs_multilevel. ... The present implementations of adjust_appendrel_attrs_multilevel and its sibling adjust_child_relids_multilevel are very messy, because they work by reconstructing the relids of the child's immediate parent and then seeing if that's bms_equal to the relids of the target parent. Aside from being quite inefficient, this will not work with planned future changes to make joinrels' relid sets contain outer-join relids in addition to baserels. The whole thing can be solved at a stroke by adding explicit parent and top_parent links to child RelOptInfos, and making these functions work with RelOptInfo pointers instead of relids. Doing that is simpler for most callers, too. In my original version of this patch, I got rid of RelOptInfo.top_parent_relids on the grounds that it was now redundant. However, that adds a lot of code churn in places that otherwise would not need changing, and arguably the extra indirection needed to fetch top_parent->relids in those places costs something. So this version leaves that field in place. Discussion: https://postgr.es/m/553080.1657481916@sss.pgh.pa.us	3 years ago
Tom Lane	e2f6c307c0	Estimate cost of elided SubqueryScan, Append, MergeAppend nodes better. ... setrefs.c contains logic to discard no-op SubqueryScan nodes, that is, ones that have no qual to check and copy the input targetlist unchanged. (Formally it's not very nice to be applying such optimizations so late in the planner, but there are practical reasons for it; mostly that we can't unify relids between the subquery and the parent query until we flatten the rangetable during setrefs.c.) This behavior falsifies our previous cost estimates, since we would've charged cpu_tuple_cost per row just to pass data through the node. Most of the time that's little enough to not matter, but there are cases where this effect visibly changes the plan compared to what you would've gotten with no sub-select. To improve the situation, make the callers of cost_subqueryscan tell it whether they think the targetlist is trivial. cost_subqueryscan already has the qual list, so it can check the other half of the condition easily. It could make its own determination of tlist triviality too, but doing so would be repetitive (for callers that may call it several times) or unnecessarily expensive (for callers that can determine this more cheaply than a general test would do). This isn't a 100% solution, because createplan.c also does things that can falsify any earlier estimate of whether the tlist is trivial. However, it fixes nearly all cases in practice, if results for the regression tests are anything to go by. setrefs.c also contains logic to discard no-op Append and MergeAppend nodes. We did have knowledge of that behavior at costing time, but somebody failed to update it when a check on parallel-awareness was added to the setrefs.c logic. Fix that while we're here. These changes result in two minor changes in query plans shown in our regression tests. Neither is relevant to the purposes of its test case AFAICT. Patch by me; thanks to Richard Guo for review. Discussion: https://postgr.es/m/2581077.1651703520@sss.pgh.pa.us	4 years ago
Tom Lane	f172b11d61	Remove no-longer-used parameter for create_groupingsets_path(). ... numGroups is unused since commit b5635948a; let's get rid of it. XueJing Zhao, reviewed by Richard Guo Discussion: https://postgr.es/m/DM6PR05MB64923CC8B63A2CAF3B2E5D47B7AD9@DM6PR05MB6492.namprd05.prod.outlook.com	4 years ago
David Rowley	9d9c02ccd1	Teach planner and executor about monotonic window funcs ... Window functions such as row_number() always return a value higher than the previously returned value for tuples in any given window partition. Traditionally queries such as; SELECT * FROM ( SELECT *, row_number() over (order by c) rn FROM t ) t WHERE rn <= 10; were executed fairly inefficiently. Neither the query planner nor the executor knew that once rn made it to 11 that nothing further would match the outer query's WHERE clause. It would blindly continue until all tuples were exhausted from the subquery. Here we implement means to make the above execute more efficiently. This is done by way of adding a pg_proc.prosupport function to various of the built-in window functions and adding supporting code to allow the support function to inform the planner if the window function is monotonically increasing, monotonically decreasing, both or neither. The planner is then able to make use of that information and possibly allow the executor to short-circuit execution by way of adding a "run condition" to the WindowAgg to allow it to determine if some of its execution work can be skipped. This "run condition" is not like a normal filter. These run conditions are only built using quals comparing values to monotonic window functions. For monotonic increasing functions, quals making use of the btree operators for <, <= and = can be used (assuming the window function column is on the left). You can see here that once such a condition becomes false that a monotonic increasing function could never make it subsequently true again. For monotonically decreasing functions the >, >= and = btree operators for the given type can be used for run conditions. The best-case situation for this is when there is a single WindowAgg node without a PARTITION BY clause. Here when the run condition becomes false the WindowAgg node can simply return NULL. No more tuples will ever match the run condition. It's a little more complex when there is a PARTITION BY clause. In this case, we cannot return NULL as we must still process other partitions. To speed this case up we pull tuples from the outer plan to check if they're from the same partition and simply discard them if they are. When we find a tuple belonging to another partition we start processing as normal again until the run condition becomes false or we run out of tuples to process. When there are multiple WindowAgg nodes to evaluate then this complicates the situation. For intermediate WindowAggs we must ensure we always return all tuples to the calling node. Any filtering done could lead to incorrect results in WindowAgg nodes above. For all intermediate nodes, we can still save some work when the run condition becomes false. We've no need to evaluate the WindowFuncs anymore. Other WindowAgg nodes cannot reference the value of these and these tuples will not appear in the final result anyway. The savings here are small in comparison to what can be saved in the top-level WingowAgg, but still worthwhile. Intermediate WindowAgg nodes never filter out tuples, but here we change WindowAgg so that the top-level WindowAgg filters out tuples that don't match the intermediate WindowAgg node's run condition. Such filters appear in the "Filter" clause in EXPLAIN for the top-level WindowAgg node. Here we add prosupport functions to allow the above to work for; row_number(), rank(), dense_rank(), count(*) and count(expr). It appears technically possible to do the same for min() and max(), however, it seems unlikely to be useful enough, so that's not done here. Bump catversion Author: David Rowley Reviewed-by: Andy Fan, Zhihong Yu Discussion: https://postgr.es/m/CAApHDvqvp3At8++yF8ij06sdcoo1S_b2YoaT9D4Nf+MObzsrLQ@mail.gmail.com	4 years ago
Tomas Vondra	db0d67db24	Optimize order of GROUP BY keys ... When evaluating a query with a multi-column GROUP BY clause using sort, the cost may be heavily dependent on the order in which the keys are compared when building the groups. Grouping does not imply any ordering, so we're allowed to compare the keys in arbitrary order, and a Hash Agg leverages this. But for Group Agg, we simply compared keys in the order as specified in the query. This commit explores alternative ordering of the keys, trying to find a cheaper one. In principle, we might generate grouping paths for all permutations of the keys, and leave the rest to the optimizer. But that might get very expensive, so we try to pick only a couple interesting orderings based on both local and global information. When planning the grouping path, we explore statistics (number of distinct values, cost of the comparison function) for the keys and reorder them to minimize comparison costs. Intuitively, it may be better to perform more expensive comparisons (for complex data types etc.) last, because maybe the cheaper comparisons will be enough. Similarly, the higher the cardinality of a key, the lower the probability we’ll need to compare more keys. The patch generates and costs various orderings, picking the cheapest ones. The ordering of group keys may interact with other parts of the query, some of which may not be known while planning the grouping. E.g. there may be an explicit ORDER BY clause, or some other ordering-dependent operation, higher up in the query, and using the same ordering may allow using either incremental sort or even eliminate the sort entirely. The patch generates orderings and picks those minimizing the comparison cost (for various pathkeys), and then adds orderings that might be useful for operations higher up in the plan (ORDER BY, etc.). Finally, it always keeps the ordering specified in the query, on the assumption the user might have additional insights. This introduces a new GUC enable_group_by_reordering, so that the optimization may be disabled if needed. The original patch was proposed by Teodor Sigaev, and later improved and reworked by Dmitry Dolgov. Reviews by a number of people, including me, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu. Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com	4 years ago
Alvaro Herrera	7103ebb7aa	Add support for MERGE SQL command ... MERGE performs actions that modify rows in the target table using a source table or query. MERGE provides a single SQL statement that can conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise require multiple PL statements. For example, MERGE INTO target AS t USING source AS s ON t.tid = s.sid WHEN MATCHED AND t.balance > s.delta THEN UPDATE SET balance = t.balance - s.delta WHEN MATCHED THEN DELETE WHEN NOT MATCHED AND s.delta > 0 THEN INSERT VALUES (s.sid, s.delta) WHEN NOT MATCHED THEN DO NOTHING; MERGE works with regular tables, partitioned tables and inheritance hierarchies, including column and row security enforcement, as well as support for row and statement triggers and transition tables therein. MERGE is optimized for OLTP and is parameterizable, though also useful for large scale ETL/ELT. MERGE is not intended to be used in preference to existing single SQL commands for INSERT, UPDATE or DELETE since there is some overhead. MERGE can be used from PL/pgSQL. MERGE does not support targetting updatable views or foreign tables, and RETURNING clauses are not allowed either. These limitations are likely fixable with sufficient effort. Rewrite rules are also not supported, but it's not clear that we'd want to support them. Author: Pavan Deolasee <pavan.deolasee@gmail.com> Author: Álvaro Herrera <alvherre@alvh.no-ip.org> Author: Amit Langote <amitlangote09@gmail.com> Author: Simon Riggs <simon.riggs@enterprisedb.com> Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com> Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions) Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions) Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions) Reviewed-by: Japin Li <japinli@hotmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com> Reviewed-by: Zhihong Yu <zyu@yugabyte.com> Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql	4 years ago
Bruce Momjian	27b77ecf9f	Update copyright for 2022 ... Backpatch-through: 10	4 years ago
David Rowley	e502150f7d	Allow Memoize to operate in binary comparison mode ... Memoize would always use the hash equality operator for the cache key types to determine if the current set of parameters were the same as some previously cached set. Certain types such as floating points where -0.0 and +0.0 differ in their binary representation but are classed as equal by the hash equality operator may cause problems as unless the join uses the same operator it's possible that whichever join operator is being used would be able to distinguish the two values. In which case we may accidentally return in the incorrect rows out of the cache. To fix this here we add a binary mode to Memoize to allow it to the current set of parameters to previously cached values by comparing bit-by-bit rather than logically using the hash equality operator. This binary mode is always used for LATERAL joins and it's used for normal joins when any of the join operators are not hashable. Reported-by: Tom Lane Author: David Rowley Discussion: https://postgr.es/m/3004308.1632952496@sss.pgh.pa.us Backpatch-through: 14, where Memoize was added	4 years ago
Michael Paquier	e767ddcd35	Fix typos and grammar in code comments ... Several mistakes have piled in the code comments over the time, including incorrect grammar, function names and simple typos. This commit takes care of a portion of these. No backpatch is done as this is only cosmetic. Author: Justin Pryzby Discussion: https://postgr.es/m/20210924215827.GS831@telsasoft.com	4 years ago
Michael Paquier	fd0625c7a9	Clean up some code using "(expr) ? true : false" ... All the code paths simplified here were already using a boolean or used an expression that led to zero or one, making the extra bits unnecessary. Author: Justin Pryzby Reviewed-by: Tom Lane, Michael Paquier, Peter Smith Discussion: https://postgr.es/m/20210428182936.GE27406@telsasoft.com	4 years ago
Peter Eisentraut	18fea737b5	Change NestPath node to contain JoinPath node ... This makes the structure of all JoinPath-derived nodes the same, independent of whether they have additional fields. Discussion: https://www.postgresql.org/message-id/flat/c1097590-a6a4-486a-64b1-e1f9cc0533ce@enterprisedb.com	4 years ago
Tom Lane	28d936031a	Get rid of artificial restriction on hash table sizes on Windows. ... The point of introducing the hash_mem_multiplier GUC was to let users reproduce the old behavior of hash aggregation, i.e. that it could use more than work_mem at need. However, the implementation failed to get the job done on Win64, where work_mem is clamped to 2GB to protect various places that calculate memory sizes using "long int". As written, the same clamp was applied to hash_mem. This resulted in severe performance regressions for queries requiring a bit more than 2GB for hash aggregation, as they now spill to disk and there's no way to stop that. Getting rid of the work_mem restriction seems like a good idea, but it's a big job and could not conceivably be back-patched. However, there's only a fairly small number of places that are concerned with the hash_mem value, and it turns out to be possible to remove the restriction there without too much code churn or any ABI breaks. So, let's do that for now to fix the regression, and leave the larger task for another day. This patch does introduce a bit more infrastructure that should help with the larger task, namely pg_bitutils.h support for working with size_t values. Per gripe from Laurent Hasson. Back-patch to v13 where the behavior change came in. Discussion: https://postgr.es/m/997817.1627074924@sss.pgh.pa.us Discussion: https://postgr.es/m/MN2PR15MB25601E80A9B6D1BA6F592B1985E39@MN2PR15MB2560.namprd15.prod.outlook.com	5 years ago
David Rowley	83f4fcc655	Change the name of the Result Cache node to Memoize ... "Result Cache" was never a great name for this node, but nobody managed to come up with another name that anyone liked enough. That was until David Johnston mentioned "Node Memoization", which Tom Lane revised to just "Memoize". People seem to like "Memoize", so let's do the rename. Reviewed-by: Justin Pryzby Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us Backpatch-through: 14, where Result Cache was introduced	5 years ago
Tom Lane	6ee41a301e	Fix mis-planning of repeated application of a projection. ... create_projection_plan contains a hidden assumption (here made explicit by an Assert) that a projection-capable Path will yield a projection-capable Plan. Unfortunately, that assumption is violated only a few lines away, by create_projection_plan itself. This means that two stacked ProjectionPaths can yield an outcome where we try to jam the upper path's tlist into a non-projection-capable child node, resulting in an invalid plan. There isn't any good reason to have stacked ProjectionPaths; indeed the whole concept is faulty, since the set of Vars/Aggs/etc needed by the upper one wouldn't necessarily be available in the output of the lower one, nor could the lower one create such values if they weren't available from its input. Hence, we can fix this by adjusting create_projection_path to strip any top-level ProjectionPath from the subpath it's given. (This amounts to saying "oh, we changed our minds about what we need to project here".) The test case added here only fails in v13 and HEAD; before that, we don't attempt to shove the Sort into the parallel part of the plan, for reasons that aren't entirely clear to me. However, all the directly-related code looks generally the same as far back as v11, where the hazard was introduced (by d7c19e62a). So I've got no faith that the same type of bug doesn't exist in v11 and v12, given the right test case. Hence, back-patch the code changes, but not the irrelevant test case, into those branches. Per report from Bas Poot. Discussion: https://postgr.es/m/534fca83789c4a378c7de379e9067d4f@politie.nl	5 years ago
David Rowley	9eacee2e62	Add Result Cache executor node (take 2) ... Here we add a new executor node type named "Result Cache". The planner can include this node type in the plan to have the executor cache the results from the inner side of parameterized nested loop joins. This allows caching of tuples for sets of parameters so that in the event that the node sees the same parameter values again, it can just return the cached tuples instead of rescanning the inner side of the join all over again. Internally, result cache uses a hash table in order to quickly find tuples that have been previously cached. For certain data sets, this can significantly improve the performance of joins. The best cases for using this new node type are for join problems where a large portion of the tuples from the inner side of the join have no join partner on the outer side of the join. In such cases, hash join would have to hash values that are never looked up, thus bloating the hash table and possibly causing it to multi-batch. Merge joins would have to skip over all of the unmatched rows. If we use a nested loop join with a result cache, then we only cache tuples that have at least one join partner on the outer side of the join. The benefits of using a parameterized nested loop with a result cache increase when there are fewer distinct values being looked up and the number of lookups of each value is large. Also, hash probes to lookup the cache can be much faster than the hash probe in a hash join as it's common that the result cache's hash table is much smaller than the hash join's due to result cache only caching useful tuples rather than all tuples from the inner side of the join. This variation in hash probe performance is more significant when the hash join's hash table no longer fits into the CPU's L3 cache, but the result cache's hash table does. The apparent "random" access of hash buckets with each hash probe can cause a poor L3 cache hit ratio for large hash tables. Smaller hash tables generally perform better. The hash table used for the cache limits itself to not exceeding work_mem * hash_mem_multiplier in size. We maintain a dlist of keys for this cache and when we're adding new tuples and realize we've exceeded the memory budget, we evict cache entries starting with the least recently used ones until we have enough memory to add the new tuples to the cache. For parameterized nested loop joins, we now consider using one of these result cache nodes in between the nested loop node and its inner node. We determine when this might be useful based on cost, which is primarily driven off of what the expected cache hit ratio will be. Estimating the cache hit ratio relies on having good distinct estimates on the nested loop's parameters. For now, the planner will only consider using a result cache for parameterized nested loop joins. This works for both normal joins and also for LATERAL type joins to subqueries. It is possible to use this new node for other uses in the future. For example, to cache results from correlated subqueries. However, that's not done here due to some difficulties obtaining a distinct estimation on the outer plan to calculate the estimated cache hit ratio. Currently we plan the inner plan before planning the outer plan so there is no good way to know if a result cache would be useful or not since we can't estimate the number of times the subplan will be called until the outer plan is generated. The functionality being added here is newly introducing a dependency on the return value of estimate_num_groups() during the join search. Previously, during the join search, we only ever needed to perform selectivity estimations. With this commit, we need to use estimate_num_groups() in order to estimate what the hit ratio on the result cache will be. In simple terms, if we expect 10 distinct values and we expect 1000 outer rows, then we'll estimate the hit ratio to be 99%. Since cache hits are very cheap compared to scanning the underlying nodes on the inner side of the nested loop join, then this will significantly reduce the planner's cost for the join. However, it's fairly easy to see here that things will go bad when estimate_num_groups() incorrectly returns a value that's significantly lower than the actual number of distinct values. If this happens then that may cause us to make use of a nested loop join with a result cache instead of some other join type, such as a merge or hash join. Our distinct estimations have been known to be a source of trouble in the past, so the extra reliance on them here could cause the planner to choose slower plans than it did previous to having this feature. Distinct estimations are also fairly hard to estimate accurately when several tables have been joined already or when a WHERE clause filters out a set of values that are correlated to the expressions we're estimating the number of distinct value for. For now, the costing we perform during query planning for result caches does put quite a bit of faith in the distinct estimations being accurate. When these are accurate then we should generally see faster execution times for plans containing a result cache. However, in the real world, we may find that we need to either change the costings to put less trust in the distinct estimations being accurate or perhaps even disable this feature by default. There's always an element of risk when we teach the query planner to do new tricks that it decides to use that new trick at the wrong time and causes a regression. Users may opt to get the old behavior by turning the feature off using the enable_resultcache GUC. Currently, this is enabled by default. It remains to be seen if we'll maintain that setting for the release. Additionally, the name "Result Cache" is the best name I could think of for this new node at the time I started writing the patch. Nobody seems to strongly dislike the name. A few people did suggest other names but no other name seemed to dominate in the brief discussion that there was about names. Let's allow the beta period to see if the current name pleases enough people. If there's some consensus on a better name, then we can change it before the release. Please see the 2nd discussion link below for the discussion on the "Result Cache" name. Author: David Rowley Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu, Hou Zhijie Tested-By: Konstantin Knizhnik Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com	5 years ago
David Rowley	28b3e3905c	Revert b6002a796 ... This removes "Add Result Cache executor node". It seems that something weird is going on with the tracking of cache hits and misses as highlighted by many buildfarm animals. It's not yet clear what the problem is as other parts of the plan indicate that the cache did work correctly, it's just the hits and misses that were being reported as 0. This is especially a bad time to have the buildfarm so broken, so reverting before too many more animals go red. Discussion: https://postgr.es/m/CAApHDvq_hydhfovm4=izgWs+C5HqEeRScjMbOgbpC-jRAeK3Yw@mail.gmail.com	5 years ago
David Rowley	b6002a796d	Add Result Cache executor node ... Here we add a new executor node type named "Result Cache". The planner can include this node type in the plan to have the executor cache the results from the inner side of parameterized nested loop joins. This allows caching of tuples for sets of parameters so that in the event that the node sees the same parameter values again, it can just return the cached tuples instead of rescanning the inner side of the join all over again. Internally, result cache uses a hash table in order to quickly find tuples that have been previously cached. For certain data sets, this can significantly improve the performance of joins. The best cases for using this new node type are for join problems where a large portion of the tuples from the inner side of the join have no join partner on the outer side of the join. In such cases, hash join would have to hash values that are never looked up, thus bloating the hash table and possibly causing it to multi-batch. Merge joins would have to skip over all of the unmatched rows. If we use a nested loop join with a result cache, then we only cache tuples that have at least one join partner on the outer side of the join. The benefits of using a parameterized nested loop with a result cache increase when there are fewer distinct values being looked up and the number of lookups of each value is large. Also, hash probes to lookup the cache can be much faster than the hash probe in a hash join as it's common that the result cache's hash table is much smaller than the hash join's due to result cache only caching useful tuples rather than all tuples from the inner side of the join. This variation in hash probe performance is more significant when the hash join's hash table no longer fits into the CPU's L3 cache, but the result cache's hash table does. The apparent "random" access of hash buckets with each hash probe can cause a poor L3 cache hit ratio for large hash tables. Smaller hash tables generally perform better. The hash table used for the cache limits itself to not exceeding work_mem * hash_mem_multiplier in size. We maintain a dlist of keys for this cache and when we're adding new tuples and realize we've exceeded the memory budget, we evict cache entries starting with the least recently used ones until we have enough memory to add the new tuples to the cache. For parameterized nested loop joins, we now consider using one of these result cache nodes in between the nested loop node and its inner node. We determine when this might be useful based on cost, which is primarily driven off of what the expected cache hit ratio will be. Estimating the cache hit ratio relies on having good distinct estimates on the nested loop's parameters. For now, the planner will only consider using a result cache for parameterized nested loop joins. This works for both normal joins and also for LATERAL type joins to subqueries. It is possible to use this new node for other uses in the future. For example, to cache results from correlated subqueries. However, that's not done here due to some difficulties obtaining a distinct estimation on the outer plan to calculate the estimated cache hit ratio. Currently we plan the inner plan before planning the outer plan so there is no good way to know if a result cache would be useful or not since we can't estimate the number of times the subplan will be called until the outer plan is generated. The functionality being added here is newly introducing a dependency on the return value of estimate_num_groups() during the join search. Previously, during the join search, we only ever needed to perform selectivity estimations. With this commit, we need to use estimate_num_groups() in order to estimate what the hit ratio on the result cache will be. In simple terms, if we expect 10 distinct values and we expect 1000 outer rows, then we'll estimate the hit ratio to be 99%. Since cache hits are very cheap compared to scanning the underlying nodes on the inner side of the nested loop join, then this will significantly reduce the planner's cost for the join. However, it's fairly easy to see here that things will go bad when estimate_num_groups() incorrectly returns a value that's significantly lower than the actual number of distinct values. If this happens then that may cause us to make use of a nested loop join with a result cache instead of some other join type, such as a merge or hash join. Our distinct estimations have been known to be a source of trouble in the past, so the extra reliance on them here could cause the planner to choose slower plans than it did previous to having this feature. Distinct estimations are also fairly hard to estimate accurately when several tables have been joined already or when a WHERE clause filters out a set of values that are correlated to the expressions we're estimating the number of distinct value for. For now, the costing we perform during query planning for result caches does put quite a bit of faith in the distinct estimations being accurate. When these are accurate then we should generally see faster execution times for plans containing a result cache. However, in the real world, we may find that we need to either change the costings to put less trust in the distinct estimations being accurate or perhaps even disable this feature by default. There's always an element of risk when we teach the query planner to do new tricks that it decides to use that new trick at the wrong time and causes a regression. Users may opt to get the old behavior by turning the feature off using the enable_resultcache GUC. Currently, this is enabled by default. It remains to be seen if we'll maintain that setting for the release. Additionally, the name "Result Cache" is the best name I could think of for this new node at the time I started writing the patch. Nobody seems to strongly dislike the name. A few people did suggest other names but no other name seemed to dominate in the brief discussion that there was about names. Let's allow the beta period to see if the current name pleases enough people. If there's some consensus on a better name, then we can change it before the release. Please see the 2nd discussion link below for the discussion on the "Result Cache" name. Author: David Rowley Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu Tested-By: Konstantin Knizhnik Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com	5 years ago
Tom Lane	86dc90056d	Rework planning and execution of UPDATE and DELETE. ... This patch makes two closely related sets of changes: 1. For UPDATE, the subplan of the ModifyTable node now only delivers the new values of the changed columns (i.e., the expressions computed in the query's SET clause) plus row identity information such as CTID. ModifyTable must re-fetch the original tuple to merge in the old values of any unchanged columns. The core advantage of this is that the changed columns are uniform across all tables of an inherited or partitioned target relation, whereas the other columns might not be. A secondary advantage, when the UPDATE involves joins, is that less data needs to pass through the plan tree. The disadvantage of course is an extra fetch of each tuple to be updated. However, that seems to be very nearly free in context; even worst-case tests don't show it to add more than a couple percent to the total query cost. At some point it might be interesting to combine the re-fetch with the tuple access that ModifyTable must do anyway to mark the old tuple dead; but that would require a good deal of refactoring and it seems it wouldn't buy all that much, so this patch doesn't attempt it. 2. For inherited UPDATE/DELETE, instead of generating a separate subplan for each target relation, we now generate a single subplan that is just exactly like a SELECT's plan, then stick ModifyTable on top of that. To let ModifyTable know which target relation a given incoming row refers to, a tableoid junk column is added to the row identity information. This gets rid of the horrid hack that was inheritance_planner(), eliminating O(N^2) planning cost and memory consumption in cases where there were many unprunable target relations. Point 2 of course requires point 1, so that there is a uniform definition of the non-junk columns to be returned by the subplan. We can't insist on uniform definition of the row identity junk columns however, if we want to keep the ability to have both plain and foreign tables in a partitioning hierarchy. Since it wouldn't scale very far to have every child table have its own row identity column, this patch includes provisions to merge similar row identity columns into one column of the subplan result. In particular, we can merge the whole-row Vars typically used as row identity by FDWs into one column by pretending they are type RECORD. (It's still okay for the actual composite Datums to be labeled with the table's rowtype OID, though.) There is more that can be done to file down residual inefficiencies in this patch, but it seems to be committable now. FDW authors should note several API changes: * The argument list for AddForeignUpdateTargets() has changed, and so has the method it must use for adding junk columns to the query. Call add_row_identity_var() instead of manipulating the parse tree directly. You might want to reconsider exactly what you're adding, too. * PlanDirectModify() must now work a little harder to find the ForeignScan plan node; if the foreign table is part of a partitioning hierarchy then the ForeignScan might not be the direct child of ModifyTable. See postgres_fdw for sample code. * To check whether a relation is a target relation, it's no longer sufficient to compare its relid to root->parse->resultRelation. Instead, check it against all_result_relids or leaf_result_relids, as appropriate. Amit Langote and Tom Lane Discussion: https://postgr.es/m/CA+HiwqHpHdqdDn48yCEhynnniahH78rwcrv1rEX65-fsZGBOLQ@mail.gmail.com	5 years ago
David Rowley	ed934d4fa3	Allow estimate_num_groups() to pass back further details about the estimation ... Here we add a new output parameter to estimate_num_groups() to allow it to inform the caller of additional, possibly useful information about the estimation. The new output parameter is a struct that currently contains just a single field with a set of flags. This was done rather than having the flags as an output parameter to allow future fields to be added without having to change the signature of the function at a later date when we want to pass back further information that might not be suitable to store in the flags field. It seems reasonable that one day in the future that the planner would want to know more about the estimation. For example, how many individual sets of statistics was the estimation generated from? The planner may want to take that into account if we ever want to consider risks as well as costs when generating plans. For now, there's only 1 flag we set in the flags field. This is to indicate if the estimation fell back on using the hard-coded constants in any part of the estimation. Callers may like to change their behavior if this is set, and this gives them the ability to do so. Callers may pass the flag pointer as NULL if they have no interest in obtaining any additional information about the estimate. We're not adding any actual usages of these flags here. Some follow-up commits will make use of this feature. Additionally, we're also not making any changes to add support for clauselist_selectivity() and clauselist_selectivity_ext(). However, if this is required in the future then the same struct being added here should be fine to use as a new output argument for those functions too. Author: David Rowley Discussion: https://postgr.es/m/CAApHDvqQqpk=1W-G_ds7A9CsXX3BggWj_7okinzkLVhDubQzjA@mail.gmail.com	5 years ago
David Rowley	bb437f995d	Add TID Range Scans to support efficient scanning ranges of TIDs ... This adds a new executor node named TID Range Scan. The query planner will generate paths for TID Range scans when quals are discovered on base relations which search for ranges on the table's ctid column. These ranges may be open at either end. For example, WHERE ctid >= '(10,0)'; will return all tuples on page 10 and over. To support this, two new optional callback functions have been added to table AM. scan_set_tidrange is used to set the scan range to just the given range of TIDs. scan_getnextslot_tidrange fetches the next tuple in the given range. For AMs were scanning ranges of TIDs would not make sense, these functions can be set to NULL in the TableAmRoutine. The query planner won't generate TID Range Scan Paths in that case. Author: Edmund Horner, David Rowley Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com	5 years ago
Tom Lane	f003a7522b	Remove [Merge]AppendPath.partitioned_rels. ... It turns out that the calculation of [Merge]AppendPath.partitioned_rels in allpaths.c is faulty and sometimes omits relevant non-leaf partitions, allowing an assertion added by commit a929e17e5a to trigger. Rather than fix that, it seems better to get rid of those fields altogether. We don't really need the info until create_plan time, and calculating it once for the selected plan should be cheaper than calculating it for each append path we consider. The preceding two commits did away with all use of the partitioned_rels values; this commit just mechanically removes the fields and the code that calculated them. Discussion: https://postgr.es/m/87sg8tqhsl.fsf@aurora.ydns.eu Discussion: https://postgr.es/m/CAJKUy5gCXDSmFs2c=R+VGgn7FiYcLCsEFEuDNNLGfoha=pBE_g@mail.gmail.com	5 years ago
Tom Lane	5076f88bc9	Remove incidental dependencies on partitioned_rels lists. ... It turns out that the calculation of [Merge]AppendPath.partitioned_rels in allpaths.c is faulty and sometimes omits relevant non-leaf partitions, allowing an assertion added by commit a929e17e5a to trigger. Rather than fix that, it seems better to get rid of those fields altogether. We don't really need the info until create_plan time, and calculating it once for the selected plan should be cheaper than calculating it for each append path we consider. This patch undoes a couple of very minor uses of the partitioned_rels values. createplan.c was testing for nil-ness to optimize away the preparatory work for make_partition_pruneinfo(). That is worth doing if the check is nigh free, but it's not worth going to any great lengths to avoid. create_append_path() was testing for nil-ness as part of deciding how to set up ParamPathInfo for an AppendPath. I replaced that with a check for the appendrel's parent rel being partitioned. That's not quite the same thing but should cover most cases. If we note any interesting loss of optimizations, we can dumb this down to just always use the more expensive method when the parent is a baserel. Discussion: https://postgr.es/m/87sg8tqhsl.fsf@aurora.ydns.eu Discussion: https://postgr.es/m/CAJKUy5gCXDSmFs2c=R+VGgn7FiYcLCsEFEuDNNLGfoha=pBE_g@mail.gmail.com	5 years ago
Bruce Momjian	ca3b37487b	Update copyright for 2021 ... Backpatch-through: 9.5	5 years ago
Tom Lane	8286223f3d	Fix missing outfuncs.c support for IncrementalSortPath. ... For debugging purposes, Path nodes are supposed to have outfuncs support, but this was overlooked in the original incremental sort patch. While at it, clean up a couple other minor oversights, as well as bizarre choice of return type for create_incremental_sort_path(). (All the existing callers just cast it to "Path *" immediately, so they don't care, but some future caller might care.) outfuncs.c fix by Zhijie Hou, the rest by me Discussion: https://postgr.es/m/324c4d81d8134117972a5b1f6cdf9560@G08CNEXMBPEKD05.g08.fujitsu.local	5 years ago
Thomas Munro	f0f13a3a08	Fix estimates for ModifyTable paths without RETURNING. ... In the past, we always estimated that a ModifyTable node would emit the same number of rows as its subpaths. Without a RETURNING clause, the correct estimate is zero. Fix, in preparation for a proposed parallel write patch that is sensitive to that number. A remaining problem is that for RETURNING queries, the estimated width is based on subpath output rather than the RETURNING tlist. Reviewed-by: Greg Nancarrow <gregn4422@gmail.com> Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV%3DqpFJrR3AcrTS3g%40mail.gmail.com	5 years ago
Peter Geoghegan	d6c08e29e7	Add hash_mem_multiplier GUC. ... Add a GUC that acts as a multiplier on work_mem. It gets applied when sizing executor node hash tables that were previously size constrained using work_mem alone. The new GUC can be used to preferentially give hash-based nodes more memory than the generic work_mem limit. It is intended to enable admin tuning of the executor's memory usage. Overall system throughput and system responsiveness can be improved by giving hash-based executor nodes more memory (especially over sort-based alternatives, which are often much less sensitive to being memory constrained). The default value for hash_mem_multiplier is 1.0, which is also the minimum valid value. This means that hash-based nodes continue to apply work_mem in the traditional way by default. hash_mem_multiplier is generally useful. However, it is being added now due to concerns about hash aggregate performance stability for users that upgrade to Postgres 13 (which added disk-based hash aggregation in commit 1f39bce0). While the old hash aggregate behavior risked out-of-memory errors, it is nevertheless likely that many users actually benefited. Hash agg's previous indifference to work_mem during query execution was not just faster; it also accidentally made aggregation resilient to grouping estimate problems (at least in cases where this didn't create destabilizing memory pressure). hash_mem_multiplier can provide a certain kind of continuity with the behavior of Postgres 12 hash aggregates in cases where the planner incorrectly estimates that all groups (plus related allocations) will fit in work_mem/hash_mem. This seems necessary because hash-based aggregation is usually much slower when only a small fraction of all groups can fit. Even when it isn't possible to totally avoid hash aggregates that spill, giving hash aggregation more memory will reliably improve performance (the same cannot be said for external sort operations, which appear to be almost unaffected by memory availability provided it's at least possible to get a single merge pass). The PostgreSQL 13 release notes should advise users that increasing hash_mem_multiplier can help with performance regressions associated with hash aggregation. That can be taken care of by a later commit. Author: Peter Geoghegan Reviewed-By: Álvaro Herrera, Jeff Davis Discussion: https://postgr.es/m/20200625203629.7m6yvut7eqblgmfo@alap3.anarazel.de Discussion: https://postgr.es/m/CAH2-WzmD%2Bi1pG6rc1%2BCjc4V6EaFJ_qSuKCCHVnH%3DoruqD-zqow%40mail.gmail.com Backpatch: 13-, where disk-based hash aggregation was introduced.	6 years ago
Tom Lane	689696c711	Fix bitmap AND/OR scans on the inside of a nestloop partition-wise join. ... reparameterize_path_by_child() failed to reparameterize BitmapAnd and BitmapOr paths. This matters only if such a path is chosen as the inside of a nestloop partition-wise join, where we have to pass in parameters from the outside of the nestloop. If that did happen, we generated a bad plan that would likely lead to crashes at execution. This is not entirely reparameterize_path_by_child()'s fault though; it's the victim of an ancient decision (my ancient decision, I think) to not bother filling in param_info in BitmapAnd/Or path nodes. That caused the function to believe that such nodes and their children contain no parameter references and so need not be processed. In hindsight that decision looks pretty penny-wise and pound-foolish: while it saves a few cycles during path node setup, we do commonly need the information later. In particular, by reversing the decision and requiring valid param_info data in all nodes of a bitmap path tree, we can get rid of indxpath.c's get_bitmap_tree_required_outer() function, which computed the data on-demand. It's not unlikely that that nets out as a savings of cycles in many scenarios. A couple of other things in indxpath.c can be simplified as well. While here, get rid of some cases in reparameterize_path_by_child() that are visibly dead or useless, given that we only care about reparameterizing paths that can be on the inside of a parameterized nestloop. This case reminds one of the maxim that untested code probably does not work, so I'm unwilling to leave unreachable code in this function. (I did leave the T_Gather case in place even though it's not reached in the regression tests. It's not very clear to me when the planner might prefer to put Gather below rather than above a nestloop, but at least in principle the case might be interesting.) Per bug #16536, originally from Arne Roland but with a test case by Andrew Gierth. Back-patch to v11 where this code came in. Discussion: https://postgr.es/m/16536-2213ee0b3aad41fd@postgresql.org	6 years ago
Tom Lane	fa27dd40d5	Run pgindent with new pg_bsd_indent version 2.1.1. ... Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that it would misformat lines containing IsA() macros on the assumption that the IsA() call should be treated like a cast. This improves some other cases involving field/variable names that match typedefs, too. The only places that get worse are a couple of uses of the OpenSSL macro STACK_OF(); we'll gladly take that trade-off. Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql	6 years ago
Tom Lane	0da06d9faf	Get rid of trailing semicolons in C macro definitions. ... Writing a trailing semicolon in a macro is almost never the right thing, because you almost always want to write a semicolon after each macro call instead. (Even if there was some reason to prefer not to, pgindent would probably make a hash of code formatted that way; so within PG the rule should basically be "don't do it".) Thus, if we have a semi inside the macro, the compiler sees "something;;". Much of the time the extra empty statement is harmless, but it could lead to mysterious syntax errors at call sites. In perhaps an overabundance of neatnik-ism, let's run around and get rid of the excess semicolons whereever possible. The only thing worse than a mysterious syntax error is a mysterious syntax error that only happens in the back branches; therefore, backpatch these changes where relevant, which is most of them because most of these mistakes are old. (The lack of reported problems shows that this is largely a hypothetical issue, but still, it could bite us in some future patch.) John Naylor and Tom Lane Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com	6 years ago
Alvaro Herrera	357889eb17	Support FETCH FIRST WITH TIES ... WITH TIES is an option to the FETCH FIRST N ROWS clause (the SQL standard's spelling of LIMIT), where you additionally get rows that compare equal to the last of those N rows by the columns in the mandatory ORDER BY clause. There was a proposal by Andrew Gierth to implement this functionality in a more powerful way that would yield more features, but the other patch had not been finished at this time, so we decided to use this one for now in the spirit of incremental development. Author: Surafel Temesgen <surafel3000@gmail.com> Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org> Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> Discussion: https://postgr.es/m/CALAY4q9ky7rD_A4vf=FVQvCGngm3LOes-ky0J6euMrg=_Se+ag@mail.gmail.com Discussion: https://postgr.es/m/87o8wvz253.fsf@news-spur.riddles.org.uk	6 years ago
Tomas Vondra	d2d8a229bc	Implement Incremental Sort ... Incremental Sort is an optimized variant of multikey sort for cases when the input is already sorted by a prefix of the requested sort keys. For example when the relation is already sorted by (key1, key2) and we need to sort it by (key1, key2, key3) we can simply split the input rows into groups having equal values in (key1, key2), and only sort/compare the remaining column key3. This has a number of benefits: - Reduced memory consumption, because only a single group (determined by values in the sorted prefix) needs to be kept in memory. This may also eliminate the need to spill to disk. - Lower startup cost, because Incremental Sort produce results after each prefix group, which is beneficial for plans where startup cost matters (like for example queries with LIMIT clause). We consider both Sort and Incremental Sort, and decide based on costing. The implemented algorithm operates in two different modes: - Fetching a minimum number of tuples without check of equality on the prefix keys, and sorting on all columns when safe. - Fetching all tuples for a single prefix group and then sorting by comparing only the remaining (non-prefix) keys. We always start in the first mode, and employ a heuristic to switch into the second mode if we believe it's beneficial - the goal is to minimize the number of unnecessary comparions while keeping memory consumption below work_mem. This is a very old patch series. The idea was originally proposed by Alexander Korotkov back in 2013, and then revived in 2017. In 2018 the patch was taken over by James Coleman, who wrote and rewrote most of the current code. There were many reviewers/contributors since 2013 - I've done my best to pick the most active ones, and listed them in this commit message. Author: James Coleman, Alexander Korotkov Reviewed-by: Tomas Vondra, Andreas Karlsson, Marti Raudsepp, Peter Geoghegan, Robert Haas, Thomas Munro, Antonin Houska, Andres Freund, Alexander Kuzmenkov Discussion: https://postgr.es/m/CAPpHfdscOX5an71nHd8WSUH6GNOCf=V7wgDaTXdDd9=goN-gfA@mail.gmail.com Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com	6 years ago
Jeff Davis	1f39bce021	Disk-based Hash Aggregation. ... While performing hash aggregation, track memory usage when adding new groups to a hash table. If the memory usage exceeds work_mem, enter "spill mode". In spill mode, new groups are not created in the hash table(s), but existing groups continue to be advanced if input tuples match. Tuples that would cause a new group to be created are instead spilled to a logical tape to be processed later. The tuples are spilled in a partitioned fashion. When all tuples from the outer plan are processed (either by advancing the group or spilling the tuple), finalize and emit the groups from the hash table. Then, create new batches of work from the spilled partitions, and select one of the saved batches and process it (possibly spilling recursively). Author: Jeff Davis Reviewed-by: Tomas Vondra, Adam Lee, Justin Pryzby, Taylor Vesely, Melanie Plageman Discussion: https://postgr.es/m/507ac540ec7c20136364b5272acbcd4574aa76ef.camel@j-davis.com	6 years ago
Jeff Davis	c11cb17dc5	Save calculated transitionSpace in Agg node. ... This will be useful in the upcoming Hash Aggregation work to improve estimates for hash table sizing. Discussion: https://postgr.es/m/37091115219dd522fd9ed67333ee8ed1b7e09443.camel%40j-davis.com	6 years ago
Bruce Momjian	7559d8ebfa	Update copyrights for 2020 ... Backpatch-through: update all files in master, backpatch legal files through 9.4	6 years ago
Amit Kapila	14aec03502	Make the order of the header file includes consistent in backend modules. ... Similar to commits 7e735035f2 and dddf4cdc33, this commit makes the order of header file inclusion consistent for backend modules. In the passing, removed a couple of duplicate inclusions. Author: Vignesh C Reviewed-by: Kuntal Ghosh and Amit Kapila Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com	6 years ago